Skip to content

Instantly share code, notes, and snippets.

@efuquen

efuquen/gist:17b4e52e29f326251d7a Secret

Created December 8, 2013 08:43
Show Gist options
  • Save efuquen/17b4e52e29f326251d7a to your computer and use it in GitHub Desktop.
Save efuquen/17b4e52e29f326251d7a to your computer and use it in GitHub Desktop.
Download ZIP
/var/log/Xorg.0.log on Ubuntu 13.10 VirtualBox Guest on OS X 10.9 Macbook Pro 15 inch Retina (Late 2013)
Raw
gistfile1.txt
[ 4.758]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 4.758] X Protocol Version 11, Revision 0
[ 4.758] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 4.758] Current Operating System: Linux efuquen-VirtualBox 3.11.0-14-generic #21-Ubuntu SMP Tue Nov 12 17:04:55 UTC 2013 x86_64
[ 4.758] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-14-generic root=UUID=c7e97429-b4b4-4efd-919d-0efde513882b ro quiet splash vt.handoff=7
[ 4.758] Build Date: 15 October 2013 09:23:37AM
[ 4.758] xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support)
[ 4.758] Current version of pixman: 0.30.2
[ 4.758] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.758] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.758] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 8 03:35:52 2013
[ 4.759] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.759] (==) No Layout section. Using the first Screen section.
[ 4.759] (==) No screen section available. Using defaults.
[ 4.759] (**) |-->Screen "Default Screen Section" (0)
[ 4.759] (**) | |-->Monitor "<default monitor>"
[ 4.759] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.759] (==) Automatically adding devices
[ 4.759] (==) Automatically enabling devices
[ 4.759] (==) Automatically adding GPU devices
[ 4.759] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 4.759] Entry deleted from font path.
[ 4.759] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 4.759] Entry deleted from font path.
[ 4.759] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 4.759] Entry deleted from font path.
[ 4.759] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 4.759] Entry deleted from font path.
[ 4.759] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 4.759] Entry deleted from font path.
[ 4.759] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 4.759] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 4.759] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.759] (II) Loader magic: 0x7f8d502f4d20
[ 4.759] (II) Module ABI versions:
[ 4.759] X.Org ANSI C Emulation: 0.4
[ 4.759] X.Org Video Driver: 14.1
[ 4.759] X.Org XInput driver : 19.1
[ 4.759] X.Org Server Extension : 7.0
[ 4.759] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.762] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/134217728
[ 4.762] (II) Open ACPI successful (/var/run/acpid.socket)
[ 4.762] Initializing built-in extension Generic Event Extension
[ 4.762] Initializing built-in extension SHAPE
[ 4.762] Initializing built-in extension MIT-SHM
[ 4.762] Initializing built-in extension XInputExtension
[ 4.762] Initializing built-in extension XTEST
[ 4.762] Initializing built-in extension BIG-REQUESTS
[ 4.762] Initializing built-in extension SYNC
[ 4.762] Initializing built-in extension XKEYBOARD
[ 4.762] Initializing built-in extension XC-MISC
[ 4.762] Initializing built-in extension SECURITY
[ 4.762] Initializing built-in extension XINERAMA
[ 4.762] Initializing built-in extension XFIXES
[ 4.762] Initializing built-in extension RENDER
[ 4.762] Initializing built-in extension RANDR
[ 4.762] Initializing built-in extension COMPOSITE
[ 4.762] Initializing built-in extension DAMAGE
[ 4.762] Initializing built-in extension MIT-SCREEN-SAVER
[ 4.762] Initializing built-in extension DOUBLE-BUFFER
[ 4.762] Initializing built-in extension RECORD
[ 4.762] Initializing built-in extension DPMS
[ 4.762] Initializing built-in extension X-Resource
[ 4.762] Initializing built-in extension XVideo
[ 4.762] Initializing built-in extension XVideo-MotionCompensation
[ 4.762] Initializing built-in extension SELinux
[ 4.762] Initializing built-in extension XFree86-VidModeExtension
[ 4.762] Initializing built-in extension XFree86-DGA
[ 4.762] Initializing built-in extension XFree86-DRI
[ 4.762] Initializing built-in extension DRI2
[ 4.762] (II) "glx" will be loaded by default.
[ 4.762] (WW) "xmir" is not to be loaded by default. Skipping.
[ 4.762] (II) LoadModule: "dri2"
[ 4.762] (II) Module "dri2" already built-in
[ 4.762] (II) LoadModule: "glamoregl"
[ 4.765] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 4.796] (II) Module glamoregl: vendor="X.Org Foundation"
[ 4.796] compiled for 1.14.3, module version = 0.5.1
[ 4.796] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.796] (II) LoadModule: "glx"
[ 4.796] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.796] (II) Module glx: vendor="X.Org Foundation"
[ 4.796] compiled for 1.14.3, module version = 1.0.0
[ 4.796] ABI class: X.Org Server Extension, version 7.0
[ 4.796] (==) AIGLX enabled
[ 4.796] Loading extension GLX
[ 4.796] (==) Matched vboxvideo as autoconfigured driver 0
[ 4.796] (==) Matched vboxvideo as autoconfigured driver 1
[ 4.796] (==) Matched vesa as autoconfigured driver 2
[ 4.796] (==) Matched modesetting as autoconfigured driver 3
[ 4.796] (==) Matched fbdev as autoconfigured driver 4
[ 4.796] (==) Assigned the driver to the xf86ConfigLayout
[ 4.796] (II) LoadModule: "vboxvideo"
[ 4.796] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo_drv.so
[ 4.800] (II) Module vboxvideo: vendor="Oracle Corporation"
[ 4.800] compiled for 10.14.0, module version = 1.0.1
[ 4.800] Module class: X.Org Video Driver
[ 4.800] ABI class: X.Org Video Driver, version 14.1
[ 4.800] (**) Load address of symbol "VBOXVIDEO" is 0x7f8d4fe5df80
[ 4.800] (II) LoadModule: "vesa"
[ 4.800] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4.800] (II) Module vesa: vendor="X.Org Foundation"
[ 4.800] compiled for 1.14.1, module version = 2.3.2
[ 4.800] Module class: X.Org Video Driver
[ 4.800] ABI class: X.Org Video Driver, version 14.1
[ 4.800] (II) LoadModule: "modesetting"
[ 4.800] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4.801] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.801] compiled for 1.14.1, module version = 0.8.0
[ 4.801] Module class: X.Org Video Driver
[ 4.801] ABI class: X.Org Video Driver, version 14.1
[ 4.801] (II) LoadModule: "fbdev"
[ 4.801] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 4.801] (II) Module fbdev: vendor="X.Org Foundation"
[ 4.801] compiled for 1.14.1, module version = 0.4.3
[ 4.801] Module class: X.Org Video Driver
[ 4.801] ABI class: X.Org Video Driver, version 14.1
[ 4.801] (II) VBoxVideo: guest driver for VirtualBox: vbox
[ 4.801] (II) VESA: driver for VESA chipsets: vesa
[ 4.801] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.801] (II) FBDEV: driver for framebuffer: fbdev
[ 4.801] (++) using VT number 7
[ 4.802] (WW) Falling back to old probe method for vesa
[ 4.802] (WW) Falling back to old probe method for modesetting
[ 4.802] (WW) Falling back to old probe method for fbdev
[ 4.802] (II) Loading sub module "fbdevhw"
[ 4.802] (II) LoadModule: "fbdevhw"
[ 4.802] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 4.802] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 4.802] compiled for 1.14.3, module version = 0.0.2
[ 4.802] ABI class: X.Org Video Driver, version 14.1
[ 4.802] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.3.4
[ 4.802] (II) Loading sub module "ramdac"
[ 4.802] (II) LoadModule: "ramdac"
[ 4.802] (II) Module "ramdac" already built-in
[ 4.802] (II) Loading sub module "fb"
[ 4.802] (II) LoadModule: "fb"
[ 4.802] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4.802] (II) Module fb: vendor="X.Org Foundation"
[ 4.802] compiled for 1.14.3, module version = 1.0.0
[ 4.802] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.802] (II) Loading sub module "shadowfb"
[ 4.802] (II) LoadModule: "shadowfb"
[ 4.802] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 4.803] (II) Module shadowfb: vendor="X.Org Foundation"
[ 4.803] compiled for 1.14.3, module version = 1.0.0
[ 4.803] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.803] (II) Loading sub module "vgahw"
[ 4.803] (II) LoadModule: "vgahw"
[ 4.803] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 4.803] (II) Module vgahw: vendor="X.Org Foundation"
[ 4.803] compiled for 1.14.3, module version = 0.1.0
[ 4.803] ABI class: X.Org Video Driver, version 14.1
[ 4.803] (II) Loading sub module "dri"
[ 4.803] (II) LoadModule: "dri"
[ 4.803] (II) Module "dri" already built-in
[ 4.803] (II) VBoxVideo(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.803] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[ 4.803] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
[ 4.803] (**) VBoxVideo(0): Built-in mode "VBoxInitialMode": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 4.803] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 4.803] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 4.803] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 4.803] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 4.803] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 4.803] (**) VBoxVideo(0): Built-in mode "VBox-1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 4.803] (II) VBoxVideo(0): Modeline "VBox-1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 4.803] (**) VBoxVideo(0): Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[ 4.803] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
[ 4.804] (**) VBoxVideo(0): Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
[ 4.804] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b)
[ 4.804] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 4.804] (==) VBoxVideo(0): RGB weight 888
[ 4.804] (==) VBoxVideo(0): Default visual is TrueColor
[ 4.804] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.804] (==) VBoxVideo(0): DPI set to (96, 96)
[ 4.804] (II) UnloadModule: "vesa"
[ 4.804] (II) Unloading vesa
[ 4.804] (II) UnloadModule: "modesetting"
[ 4.804] (II) Unloading modesetting
[ 4.804] (II) UnloadModule: "fbdev"
[ 4.804] (II) Unloading fbdev
[ 4.804] (II) UnloadSubModule: "fbdevhw"
[ 4.804] (II) Unloading fbdevhw
[ 4.804] (--) Depth 24 pixmap format is 32 bpp
[ 4.808] drmOpenDevice: node name is /dev/dri/card0
[ 4.808] drmOpenDevice: open result is 12, (OK)
[ 4.808] drmOpenDevice: node name is /dev/dri/card0
[ 4.808] drmOpenDevice: open result is 12, (OK)
[ 4.808] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 4.808] drmOpenDevice: node name is /dev/dri/card0
[ 4.808] drmOpenDevice: open result is 12, (OK)
[ 4.808] drmOpenByBusid: drmOpenMinor returns 12
[ 4.808] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 4.808] (II) [drm] DRM interface version 1.4
[ 4.808] (II) [drm] DRM open master succeeded.
[ 4.808] (II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables.
[ 4.808] (II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000
[ 4.808] (II) VBoxVideo(0): [drm] added 1 reserved context for kernel
[ 4.808] (II) VBoxVideo(0): X context handle = 0x1
[ 4.808] (II) VBoxVideo(0): [drm] installed DRM signal handler
[ 4.808] (II) VBoxVideo(0): visual configurations initialized
[ 4.808] (II) VBoxVideo(0): Requested monitor count: 1
[ 4.808] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 4.808] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 4.808] (II) VBoxVideo(0): EDID for output VBOX0
[ 4.808] (II) VBoxVideo(0): Manufacturer: VBX Model: 0 Serial#: 50332672
[ 4.808] (II) VBoxVideo(0): Year: 1990 Week: 1
[ 4.808] (II) VBoxVideo(0): EDID Version: 1.3
[ 4.808] (II) VBoxVideo(0): Digital Display Input
[ 4.808] (II) VBoxVideo(0): Indeterminate output size
[ 4.809] (II) VBoxVideo(0): Gamma: 2.20
[ 4.809] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[ 4.809] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 4.809] (II) VBoxVideo(0): Default color space is primary color space
[ 4.809] (II) VBoxVideo(0): First detailed timing is preferred mode
[ 4.809] (II) VBoxVideo(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 4.809] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 4.809] (II) VBoxVideo(0): Manufacturer's mask: 0
[ 4.809] (II) VBoxVideo(0): Supported detailed timing:
[ 4.809] (II) VBoxVideo(0): clock: 47.8 MHz Image Size: 0 x 0 mm
[ 4.809] (II) VBoxVideo(0): h_active: 1024 h_sync: 1026 h_sync_end 1028 h_blank_end 1030 h_border: 0
[ 4.809] (II) VBoxVideo(0): v_active: 768 v_sync: 770 v_sync_end 772 v_blanking: 774 v_border: 0
[ 4.809] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[ 4.809] (II) VBoxVideo(0): Monitor name: VBOX monitor
[ 4.809] (II) VBoxVideo(0): EDID (in hex):
[ 4.809] (II) VBoxVideo(0): 00ffffffffffff005858000000040003
[ 4.809] (II) VBoxVideo(0): 0100010380000078eeee91a3544c9926
[ 4.809] (II) VBoxVideo(0): 0f505400000001010101010101010101
[ 4.809] (II) VBoxVideo(0): 010101010101af120006400006300202
[ 4.809] (II) VBoxVideo(0): 2200000000000000000000fd0000c800
[ 4.809] (II) VBoxVideo(0): c864000a202020202020000000fc0056
[ 4.809] (II) VBoxVideo(0): 424f58206d6f6e69746f720a00000010
[ 4.809] (II) VBoxVideo(0): 000a20202020202020202020202000fb
[ 4.809] (II) VBoxVideo(0): Printing probed modes for output VBOX0
[ 4.809] (II) VBoxVideo(0): Modeline "1024x768"x60.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz Pb)
[ 4.809] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
[ 4.809] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b)
[ 4.809] (II) VBoxVideo(0): Output VBOX0 connected
[ 4.809] (II) VBoxVideo(0): Using exact sizes for initial modes
[ 4.809] (II) VBoxVideo(0): Output VBOX0 using initial mode 1024x768
[ 4.809] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4.809] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4.810] (==) VBoxVideo(0): DPMS enabled
[ 4.810] (II) VBoxVideo(0): [DRI] installation complete
[ 4.810] (--) RandR disabled
[ 4.813] (II) SELinux: Disabled on system
[ 4.814] (II) AIGLX: Screen 0 is not DRI2 capable
[ 4.814] drmOpenDevice: node name is /dev/dri/card0
[ 4.814] drmOpenDevice: open result is 13, (OK)
[ 4.814] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 4.814] drmOpenDevice: node name is /dev/dri/card0
[ 4.814] drmOpenDevice: open result is 13, (OK)
[ 4.814] drmOpenByBusid: drmOpenMinor returns 13
[ 4.814] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 4.814] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 4.825] (II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver
[ 4.825] (II) The file referenced, is *NOT* loaded
[ 4.825] (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
[ 4.825] (EE) AIGLX error: vboxvideo does not export required DRI extension
[ 4.825] (EE) AIGLX: reverting to software rendering
[ 4.860] (II) AIGLX: Loaded and initialized swrast
[ 4.860] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 4.860] (II) VBoxVideo(0): Setting screen physical size to 270 x 203
[ 4.869] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 4.870] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 4.870] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4.870] (II) LoadModule: "evdev"
[ 4.870] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4.871] (II) Module evdev: vendor="X.Org Foundation"
[ 4.871] compiled for 1.14.1, module version = 2.7.3
[ 4.871] Module class: X.Org XInput Driver
[ 4.871] ABI class: X.Org XInput driver, version 19.1
[ 4.871] (II) Using input driver 'evdev' for 'Power Button'
[ 4.871] (**) Power Button: always reports core events
[ 4.871] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 4.871] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4.871] (--) evdev: Power Button: Found keys
[ 4.871] (II) evdev: Power Button: Configuring as keyboard
[ 4.871] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0"
[ 4.871] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4.871] (**) Option "xkb_rules" "evdev"
[ 4.871] (**) Option "xkb_model" "pc105"
[ 4.871] (**) Option "xkb_layout" "us"
[ 4.872] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 4.872] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4.872] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4.872] (**) Sleep Button: always reports core events
[ 4.872] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 4.872] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 4.872] (--) evdev: Sleep Button: Found keys
[ 4.872] (II) evdev: Sleep Button: Configuring as keyboard
[ 4.872] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1/event1"
[ 4.872] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 4.872] (**) Option "xkb_rules" "evdev"
[ 4.872] (**) Option "xkb_model" "pc105"
[ 4.872] (**) Option "xkb_layout" "us"
[ 4.872] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4.872] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 4.872] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event4)
[ 4.872] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[ 4.872] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[ 4.872] (**) VirtualBox mouse integration: always reports core events
[ 4.872] (**) evdev: VirtualBox mouse integration: Device: "/dev/input/event4"
[ 4.872] (--) evdev: VirtualBox mouse integration: Vendor 0x80ee Product 0xcafe
[ 4.872] (--) evdev: VirtualBox mouse integration: Found 1 mouse buttons
[ 4.872] (--) evdev: VirtualBox mouse integration: Found absolute axes
[ 4.872] (--) evdev: VirtualBox mouse integration: Found x and y absolute axes
[ 4.872] (--) evdev: VirtualBox mouse integration: Found absolute touchscreen
[ 4.872] (II) evdev: VirtualBox mouse integration: Configuring as touchscreen
[ 4.872] (**) evdev: VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[ 4.872] (**) evdev: VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input4/event4"
[ 4.872] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: TOUCHSCREEN, id 8)
[ 4.872] (II) evdev: VirtualBox mouse integration: initialized for absolute axes.
[ 4.872] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[ 4.872] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[ 4.872] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[ 4.872] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[ 4.872] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js1)
[ 4.872] (II) No input driver specified, ignoring this device.
[ 4.872] (II) This device may have been added with another device file.
[ 4.873] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event3)
[ 4.873] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[ 4.873] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[ 4.873] (**) VirtualBox USB Tablet: always reports core events
[ 4.873] (**) evdev: VirtualBox USB Tablet: Device: "/dev/input/event3"
[ 4.873] (--) evdev: VirtualBox USB Tablet: Vendor 0x80ee Product 0x21
[ 4.873] (--) evdev: VirtualBox USB Tablet: Found 9 mouse buttons
[ 4.873] (--) evdev: VirtualBox USB Tablet: Found scroll wheel(s)
[ 4.873] (--) evdev: VirtualBox USB Tablet: Found relative axes
[ 4.873] (--) evdev: VirtualBox USB Tablet: Found absolute axes
[ 4.873] (--) evdev: VirtualBox USB Tablet: Found x and y absolute axes
[ 4.873] (--) evdev: VirtualBox USB Tablet: Found absolute touchscreen
[ 4.873] (II) evdev: VirtualBox USB Tablet: Configuring as touchscreen
[ 4.873] (II) evdev: VirtualBox USB Tablet: Adding scrollwheel support
[ 4.873] (**) evdev: VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[ 4.873] (**) evdev: VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4.873] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input3/event3"
[ 4.873] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: TOUCHSCREEN, id 9)
[ 4.873] (WW) evdev: VirtualBox USB Tablet: touchpads, tablets and touchscreens ignore relative axes.
[ 4.873] (II) evdev: VirtualBox USB Tablet: initialized for absolute axes.
[ 4.873] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[ 4.873] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[ 4.873] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[ 4.873] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[ 4.873] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[ 4.873] (II) No input driver specified, ignoring this device.
[ 4.873] (II) This device may have been added with another device file.
[ 4.873] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse0)
[ 4.873] (II) No input driver specified, ignoring this device.
[ 4.873] (II) This device may have been added with another device file.
[ 4.873] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 4.873] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4.873] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4.873] (**) AT Translated Set 2 keyboard: always reports core events
[ 4.873] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 4.873] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4.873] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4.873] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4.873] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 4.873] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 4.873] (**) Option "xkb_rules" "evdev"
[ 4.873] (**) Option "xkb_model" "pc105"
[ 4.873] (**) Option "xkb_layout" "us"
[ 4.874] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event5)
[ 4.874] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 4.874] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[ 4.874] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 4.874] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event5"
[ 4.874] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[ 4.874] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 4.874] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 4.874] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 4.874] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 4.874] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 4.874] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[ 4.874] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 4.874] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4.874] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 4.874] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 11)
[ 4.874] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 4.874] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[ 4.874] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[ 4.874] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[ 4.874] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[ 4.874] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse1)
[ 4.874] (II) No input driver specified, ignoring this device.
[ 4.874] (II) This device may have been added with another device file.
[ 5.372] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 5.372] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[ 5.372] (II) VBoxVideo(0): Using hsync ranges from config file
[ 5.372] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 5.372] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 5.372] (II) VBoxVideo(0): Modeline "1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 -hsync -vsync (46.4 kHz eP)
[ 6.290] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 6.340] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 6.340] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[ 6.340] (II) VBoxVideo(0): Using hsync ranges from config file
[ 6.340] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 6.340] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 6.340] (II) VBoxVideo(0): Modeline "1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 -hsync -vsync (46.4 kHz eP)
[ 6.421] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 6.455] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 6.795] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 6.795] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[ 6.795] (II) VBoxVideo(0): Using hsync ranges from config file
[ 6.795] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 6.795] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 6.795] (II) VBoxVideo(0): Modeline "1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 -hsync -vsync (46.4 kHz eP)
[ 7.191] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 7.192] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[ 7.192] (II) VBoxVideo(0): Using hsync ranges from config file
[ 7.192] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 7.192] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 7.192] (II) VBoxVideo(0): Modeline "1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 -hsync -vsync (46.4 kHz eP)
[ 7.427] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 7.427] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[ 7.427] (II) VBoxVideo(0): Using hsync ranges from config file
[ 7.427] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 7.427] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 7.428] (II) VBoxVideo(0): Modeline "1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 -hsync -vsync (46.4 kHz eP)
[ 8.145] (II) XKB: reuse xkmfile /var/lib/xkb/server-CB537B66032B0DBE0AE956F537017A59DB020654.xkm
[ 26.336] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 26.336] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[ 26.336] (II) VBoxVideo(0): Using hsync ranges from config file
[ 26.336] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 26.336] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 26.336] (II) VBoxVideo(0): Modeline "1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 -hsync -vsync (46.4 kHz eP)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment