Created
May 5, 2012 15:40
-
-
Save eigenhombre/2603426 to your computer and use it in GitHub Desktop.
evbuilder dmesg
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| pdaq@evbuilder[~] 15:20:17 (1)$ dmesg | |
| Linux version 2.6.18-194.3.1.el5 (brewbuilder@norob.fnal.gov) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Fri May 7 01:43:09 EDT 2010 | |
| Command line: ro root=LABEL=/ | |
| BIOS-provided physical RAM map: | |
| BIOS-e820: 0000000000010000 - 00000000000a0000 (usable) | |
| BIOS-e820: 0000000000100000 - 00000000cf679000 (usable) | |
| BIOS-e820: 00000000cf679000 - 00000000cf68f000 (reserved) | |
| BIOS-e820: 00000000cf68f000 - 00000000cf6ce000 (ACPI data) | |
| BIOS-e820: 00000000cf6ce000 - 00000000d0000000 (reserved) | |
| BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) | |
| BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved) | |
| BIOS-e820: 0000000100000000 - 0000000630000000 (usable) | |
| DMI 2.6 present. | |
| ACPI: RSDP (v002 DELL ) @ 0x00000000000f0a90 | |
| ACPI: XSDT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f0b94 | |
| ACPI: FADT (v003 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b3f9c | |
| ACPI: MADT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b3478 | |
| ACPI: SPCR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b35d8 | |
| ACPI: HPET (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b362c | |
| ACPI: DM__ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b3668 | |
| ACPI: MCFG (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b38c4 | |
| ACPI: WDAT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b3904 | |
| ACPI: SLIC (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b3a3c | |
| ACPI: ERST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf692edc | |
| ACPI: HEST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf69314c | |
| ACPI: BERT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf692d5c | |
| ACPI: EINJ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf692d8c | |
| ACPI: SRAT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b3bc0 | |
| ACPI: TCPA (v002 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b3f34 | |
| ACPI: SSDT (v001 INTEL PPM RCM 0x80000001 INTL 0x20061109) @ 0x00000000cf6b7000 | |
| ACPI: DSDT (v001 DELL PE_SC3 0x00000001 INTL 0x20050624) @ 0x0000000000000000 | |
| SRAT: PXM 1 -> APIC 32 -> Node 0 | |
| SRAT: PXM 2 -> APIC 0 -> Node 1 | |
| SRAT: PXM 1 -> APIC 34 -> Node 0 | |
| SRAT: PXM 2 -> APIC 2 -> Node 1 | |
| SRAT: PXM 1 -> APIC 36 -> Node 0 | |
| SRAT: PXM 2 -> APIC 4 -> Node 1 | |
| SRAT: PXM 1 -> APIC 48 -> Node 0 | |
| SRAT: PXM 2 -> APIC 16 -> Node 1 | |
| SRAT: PXM 1 -> APIC 50 -> Node 0 | |
| SRAT: PXM 2 -> APIC 18 -> Node 1 | |
| SRAT: PXM 1 -> APIC 52 -> Node 0 | |
| SRAT: PXM 2 -> APIC 20 -> Node 1 | |
| SRAT: Node 1 PXM 2 0-d0000000 | |
| SRAT: Node 1 PXM 2 0-330000000 | |
| SRAT: Node 0 PXM 1 330000000-630000000 | |
| NUMA: Using 28 for the hash shift. | |
| Bootmem setup node 0 0000000330000000-0000000630000000 | |
| Bootmem setup node 1 0000000000000000-0000000330000000 | |
| Memory for crash kernel (0x0 to 0x0) notwithin permissible range | |
| disabling kdump | |
| On node 0 totalpages: 3102720 | |
| Normal zone: 3102720 pages, LIFO batch:31 | |
| On node 1 totalpages: 3096160 | |
| DMA zone: 2607 pages, LIFO batch:0 | |
| DMA32 zone: 831153 pages, LIFO batch:31 | |
| Normal zone: 2262400 pages, LIFO batch:31 | |
| ACPI: PM-Timer IO Port: 0x808 | |
| ACPI: Local APIC address 0xfee00000 | |
| ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled) | |
| Processor #32 6:12 APIC version 21 | |
| ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled) | |
| Processor #0 6:12 APIC version 21 | |
| ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled) | |
| Processor #34 6:12 APIC version 21 | |
| ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) | |
| Processor #2 6:12 APIC version 21 | |
| ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] enabled) | |
| Processor #36 6:12 APIC version 21 | |
| ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled) | |
| Processor #4 6:12 APIC version 21 | |
| ACPI: LAPIC (acpi_id[0x07] lapic_id[0x30] enabled) | |
| Processor #48 6:12 APIC version 21 | |
| ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled) | |
| Processor #16 6:12 APIC version 21 | |
| ACPI: LAPIC (acpi_id[0x09] lapic_id[0x32] enabled) | |
| Processor #50 6:12 APIC version 21 | |
| ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled) | |
| Processor #18 6:12 APIC version 21 | |
| ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x34] enabled) | |
| Processor #52 6:12 APIC version 21 | |
| ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled) | |
| Processor #20 6:12 APIC version 21 | |
| ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled) | |
| ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled) | |
| ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled) | |
| ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled) | |
| ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled) | |
| ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled) | |
| ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled) | |
| ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled) | |
| ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled) | |
| ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled) | |
| ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled) | |
| ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled) | |
| ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled) | |
| ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled) | |
| ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled) | |
| ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled) | |
| ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled) | |
| ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled) | |
| ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled) | |
| ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled) | |
| ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) | |
| ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) | |
| IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 | |
| ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32]) | |
| IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55 | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) | |
| ACPI: IRQ0 used by override. | |
| ACPI: IRQ2 used by override. | |
| ACPI: IRQ9 used by override. | |
| Setting APIC routing to clustered | |
| ACPI: HPET id: 0x8086a301 base: 0xfed00000 | |
| Using ACPI (MADT) for SMP configuration information | |
| Nosave address range: 00000000000a0000 - 0000000000100000 | |
| Nosave address range: 00000000cf679000 - 00000000cf68f000 | |
| Nosave address range: 00000000cf68f000 - 00000000cf6ce000 | |
| Nosave address range: 00000000cf6ce000 - 00000000d0000000 | |
| Nosave address range: 00000000d0000000 - 00000000e0000000 | |
| Nosave address range: 00000000e0000000 - 00000000f0000000 | |
| Nosave address range: 00000000f0000000 - 00000000fe000000 | |
| Nosave address range: 00000000fe000000 - 0000000100000000 | |
| Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) | |
| SMP: Allowing 32 CPUs, 20 hotplug CPUs | |
| Built 2 zonelists. Total pages: 6198880 | |
| Kernel command line: ro root=LABEL=/ | |
| Initializing CPU#0 | |
| PID hash table entries: 4096 (order: 12, 32768 bytes) | |
| Console: colour VGA+ 80x25 | |
| Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) | |
| Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) | |
| Checking aperture... | |
| ACPI: DMAR not present | |
| PCI-DMA: Using software bounce buffering for IO (SWIOTLB) | |
| Placing software IO TLB between 0x40a0000 - 0x80a0000 | |
| Memory: 24676164k/25952256k available (2573k kernel code, 479456k reserved, 1305k data, 212k init) | |
| Calibrating delay loop (skipped), value calculated using timer frequency.. 5852.21 BogoMIPS (lpj=2926107) | |
| Security Framework v1.0.0 initialized | |
| SELinux: Initializing. | |
| SELinux: Starting in permissive mode | |
| selinux_register_security: Registering secondary module capability | |
| Capability LSM initialized as secondary | |
| Mount-cache hash table entries: 256 | |
| CPU: L1 I cache: 32K, L1 D cache: 32K | |
| CPU: L2 cache: 256K | |
| CPU: L3 cache: 12288K | |
| CPU 0/20 -> Node 0 | |
| using mwait in idle threads. | |
| CPU: Physical Processor ID: 1 | |
| CPU: Processor Core ID: 0 | |
| CPU0: Thermal monitoring enabled (TM1) | |
| SMP alternatives: switching to UP code | |
| ACPI: Core revision 20060707 | |
| Using local APIC timer interrupts. | |
| Detected 8.312 MHz APIC timer. | |
| SMP alternatives: switching to SMP code | |
| Booting processor 1/12 APIC 0x0 | |
| Initializing CPU#1 | |
| Calibrating delay using timer specific routine.. 5852.00 BogoMIPS (lpj=2926002) | |
| CPU: L1 I cache: 32K, L1 D cache: 32K | |
| CPU: L2 cache: 256K | |
| CPU: L3 cache: 12288K | |
| CPU 1/0 -> Node 1 | |
| CPU: Physical Processor ID: 0 | |
| CPU: Processor Core ID: 0 | |
| CPU1: Thermal monitoring enabled (TM1) | |
| Intel(R) Xeon(R) CPU X5670 @ 2.93GHz stepping 02 | |
| SMP alternatives: switching to SMP code | |
| Booting processor 2/12 APIC 0x22 | |
| Initializing CPU#2 | |
| Calibrating delay using timer specific routine.. 5852.02 BogoMIPS (lpj=2926013) | |
| CPU: L1 I cache: 32K, L1 D cache: 32K | |
| CPU: L2 cache: 256K | |
| CPU: L3 cache: 12288K | |
| CPU 2/22 -> Node 0 | |
| CPU: Physical Processor ID: 1 | |
| CPU: Processor Core ID: 1 | |
| CPU2: Thermal monitoring enabled (TM1) | |
| Intel(R) Xeon(R) CPU X5670 @ 2.93GHz stepping 02 | |
| SMP alternatives: switching to SMP code | |
| Booting processor 3/12 APIC 0x2 | |
| Initializing CPU#3 | |
| Calibrating delay using timer specific routine.. 5852.04 BogoMIPS (lpj=2926022) | |
| CPU: L1 I cache: 32K, L1 D cache: 32K | |
| CPU: L2 cache: 256K | |
| CPU: L3 cache: 12288K | |
| CPU 3/2 -> Node 1 | |
| CPU: Physical Processor ID: 0 | |
| CPU: Processor Core ID: 1 | |
| CPU3: Thermal monitoring enabled (TM1) | |
| Intel(R) Xeon(R) CPU X5670 @ 2.93GHz stepping 02 | |
| SMP alternatives: switching to SMP code | |
| Booting processor 4/12 APIC 0x24 | |
| Initializing CPU#4 | |
| Calibrating delay using timer specific routine.. 5852.03 BogoMIPS (lpj=2926015) | |
| CPU: L1 I cache: 32K, L1 D cache: 32K | |
| CPU: L2 cache: 256K | |
| CPU: L3 cache: 12288K | |
| CPU 4/24 -> Node 0 | |
| CPU: Physical Processor ID: 1 | |
| CPU: Processor Core ID: 2 | |
| CPU4: Thermal monitoring enabled (TM1) | |
| Intel(R) Xeon(R) CPU X5670 @ 2.93GHz stepping 02 | |
| SMP alternatives: switching to SMP code | |
| Booting processor 5/12 APIC 0x4 | |
| Initializing CPU#5 | |
| Calibrating delay using timer specific routine.. 5852.04 BogoMIPS (lpj=2926024) | |
| CPU: L1 I cache: 32K, L1 D cache: 32K | |
| CPU: L2 cache: 256K | |
| CPU: L3 cache: 12288K | |
| CPU 5/4 -> Node 1 | |
| CPU: Physical Processor ID: 0 | |
| CPU: Processor Core ID: 2 | |
| CPU5: Thermal monitoring enabled (TM1) | |
| Intel(R) Xeon(R) CPU X5670 @ 2.93GHz stepping 02 | |
| SMP alternatives: switching to SMP code | |
| Booting processor 6/12 APIC 0x30 | |
| Initializing CPU#6 | |
| Calibrating delay using timer specific routine.. 5852.02 BogoMIPS (lpj=2926013) | |
| CPU: L1 I cache: 32K, L1 D cache: 32K | |
| CPU: L2 cache: 256K | |
| CPU: L3 cache: 12288K | |
| CPU 6/30 -> Node 0 | |
| CPU: Physical Processor ID: 1 | |
| CPU: Processor Core ID: 8 | |
| CPU6: Thermal monitoring enabled (TM1) | |
| Intel(R) Xeon(R) CPU X5670 @ 2.93GHz stepping 02 | |
| SMP alternatives: switching to SMP code | |
| Booting processor 7/12 APIC 0x10 | |
| Initializing CPU#7 | |
| Calibrating delay using timer specific routine.. 5852.04 BogoMIPS (lpj=2926023) | |
| CPU: L1 I cache: 32K, L1 D cache: 32K | |
| CPU: L2 cache: 256K | |
| CPU: L3 cache: 12288K | |
| CPU 7/10 -> Node 1 | |
| CPU: Physical Processor ID: 0 | |
| CPU: Processor Core ID: 8 | |
| CPU7: Thermal monitoring enabled (TM1) | |
| Intel(R) Xeon(R) CPU X5670 @ 2.93GHz stepping 02 | |
| SMP alternatives: switching to SMP code | |
| Booting processor 8/12 APIC 0x32 | |
| Initializing CPU#8 | |
| Calibrating delay using timer specific routine.. 5852.03 BogoMIPS (lpj=2926016) | |
| CPU: L1 I cache: 32K, L1 D cache: 32K | |
| CPU: L2 cache: 256K | |
| CPU: L3 cache: 12288K | |
| CPU 8/32 -> Node 0 | |
| CPU: Physical Processor ID: 1 | |
| CPU: Processor Core ID: 9 | |
| CPU8: Thermal monitoring enabled (TM1) | |
| Intel(R) Xeon(R) CPU X5670 @ 2.93GHz stepping 02 | |
| SMP alternatives: switching to SMP code | |
| Booting processor 9/12 APIC 0x12 | |
| Initializing CPU#9 | |
| Calibrating delay using timer specific routine.. 5852.04 BogoMIPS (lpj=2926021) | |
| CPU: L1 I cache: 32K, L1 D cache: 32K | |
| CPU: L2 cache: 256K | |
| CPU: L3 cache: 12288K | |
| CPU 9/12 -> Node 1 | |
| CPU: Physical Processor ID: 0 | |
| CPU: Processor Core ID: 9 | |
| CPU9: Thermal monitoring enabled (TM1) | |
| Intel(R) Xeon(R) CPU X5670 @ 2.93GHz stepping 02 | |
| SMP alternatives: switching to SMP code | |
| Booting processor 10/12 APIC 0x34 | |
| Initializing CPU#10 | |
| Calibrating delay using timer specific routine.. 5852.02 BogoMIPS (lpj=2926012) | |
| CPU: L1 I cache: 32K, L1 D cache: 32K | |
| CPU: L2 cache: 256K | |
| CPU: L3 cache: 12288K | |
| CPU 10/34 -> Node 0 | |
| CPU: Physical Processor ID: 1 | |
| CPU: Processor Core ID: 10 | |
| CPU10: Thermal monitoring enabled (TM1) | |
| Intel(R) Xeon(R) CPU X5670 @ 2.93GHz stepping 02 | |
| SMP alternatives: switching to SMP code | |
| Booting processor 11/12 APIC 0x14 | |
| Initializing CPU#11 | |
| Calibrating delay using timer specific routine.. 5852.03 BogoMIPS (lpj=2926016) | |
| CPU: L1 I cache: 32K, L1 D cache: 32K | |
| CPU: L2 cache: 256K | |
| CPU: L3 cache: 12288K | |
| CPU 11/14 -> Node 1 | |
| CPU: Physical Processor ID: 0 | |
| CPU: Processor Core ID: 10 | |
| CPU11: Thermal monitoring enabled (TM1) | |
| Intel(R) Xeon(R) CPU X5670 @ 2.93GHz stepping 02 | |
| Brought up 12 CPUs | |
| testing NMI watchdog ... OK. | |
| time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. | |
| time.c: Detected 2926.107 MHz processor. | |
| sizeof(vma)=176 bytes | |
| sizeof(page)=56 bytes | |
| sizeof(inode)=560 bytes | |
| sizeof(dentry)=216 bytes | |
| sizeof(ext3inode)=760 bytes | |
| sizeof(buffer_head)=96 bytes | |
| sizeof(skbuff)=248 bytes | |
| migration_cost=15,1018 | |
| checking if image is initramfs... it is | |
| Freeing initrd memory: 2631k freed | |
| NET: Registered protocol family 16 | |
| ACPI: bus type pci registered | |
| PCI: Using MMCONFIG at e0000000 | |
| ACPI: Interpreter enabled | |
| ACPI: Using IOAPIC for interrupt routing | |
| ACPI: No dock devices found. | |
| ACPI: PCI Root Bridge [PCI0] (0000:00) | |
| PCI: Transparent bridge - 0000:00:1e.0 | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT] | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT] | |
| ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] | |
| ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15) | |
| ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15) | |
| ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15) | |
| ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15) | |
| ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) | |
| ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15) | |
| ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. | |
| ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15) | |
| Linux Plug and Play Support v0.97 (c) Adam Belay | |
| pnp: PnP ACPI init | |
| pnp: PnP ACPI: found 12 devices | |
| usbcore: registered new driver usbfs | |
| usbcore: registered new driver hub | |
| PCI: Using ACPI for IRQ routing | |
| PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report | |
| NetLabel: Initializing | |
| NetLabel: domain hash size = 128 | |
| NetLabel: protocols = UNLABELED CIPSOv4 | |
| NetLabel: unlabeled traffic allowed by default | |
| hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0 | |
| hpet0: 4 64-bit timers, 14318180 Hz | |
| ACPI: DMAR not present | |
| PCI-GART: No AMD northbridge found. | |
| pnp: 00:07: ioport range 0x800-0x87f could not be reserved | |
| pnp: 00:07: ioport range 0x880-0x8ff has been reserved | |
| pnp: 00:07: ioport range 0x900-0x91f has been reserved | |
| pnp: 00:07: ioport range 0x920-0x923 has been reserved | |
| pnp: 00:07: ioport range 0x924-0x924 has been reserved | |
| pnp: 00:07: ioport range 0xc00-0xc7f has been reserved | |
| pnp: 00:07: ioport range 0xca0-0xca7 has been reserved | |
| pnp: 00:08: ioport range 0xca8-0xca8 has been reserved | |
| pnp: 00:08: ioport range 0xcac-0xcac has been reserved | |
| PCI: Bridge: 0000:00:01.0 | |
| IO window: disabled. | |
| MEM window: d6000000-d9ffffff | |
| PREFETCH window: disabled. | |
| PCI: Bridge: 0000:00:03.0 | |
| IO window: disabled. | |
| MEM window: da000000-ddffffff | |
| PREFETCH window: disabled. | |
| PCI: Bridge: 0000:00:04.0 | |
| IO window: f000-ffff | |
| MEM window: df100000-df1fffff | |
| PREFETCH window: disabled. | |
| PCI: Bridge: 0000:00:05.0 | |
| IO window: disabled. | |
| MEM window: disabled. | |
| PREFETCH window: disabled. | |
| PCI: Bridge: 0000:00:06.0 | |
| IO window: disabled. | |
| MEM window: disabled. | |
| PREFETCH window: disabled. | |
| PCI: Bridge: 0000:00:07.0 | |
| IO window: disabled. | |
| MEM window: disabled. | |
| PREFETCH window: disabled. | |
| PCI: Bridge: 0000:00:09.0 | |
| IO window: disabled. | |
| MEM window: disabled. | |
| PREFETCH window: disabled. | |
| PCI: Bridge: 0000:00:1e.0 | |
| IO window: disabled. | |
| MEM window: de000000-deffffff | |
| PREFETCH window 0x00000000d5800000-0x00000000d5ffffff | |
| GSI 16 sharing vector 0xA9 and IRQ 16 | |
| ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 53 (level, low) -> IRQ 169 | |
| PCI: Setting latency timer of device 0000:00:01.0 to 64 | |
| ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 53 (level, low) -> IRQ 169 | |
| PCI: Setting latency timer of device 0000:00:03.0 to 64 | |
| ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 53 (level, low) -> IRQ 169 | |
| PCI: Setting latency timer of device 0000:00:04.0 to 64 | |
| ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 53 (level, low) -> IRQ 169 | |
| PCI: Setting latency timer of device 0000:00:05.0 to 64 | |
| ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 53 (level, low) -> IRQ 169 | |
| PCI: Setting latency timer of device 0000:00:06.0 to 64 | |
| ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 53 (level, low) -> IRQ 169 | |
| PCI: Setting latency timer of device 0000:00:07.0 to 64 | |
| ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 53 (level, low) -> IRQ 169 | |
| PCI: Setting latency timer of device 0000:00:09.0 to 64 | |
| PCI: Setting latency timer of device 0000:00:1e.0 to 64 | |
| NET: Registered protocol family 2 | |
| IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) | |
| TCP established hash table entries: 262144 (order: 10, 4194304 bytes) | |
| TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) | |
| TCP: Hash tables configured (established 262144 bind 65536) | |
| TCP reno registered | |
| audit: initializing netlink socket (disabled) | |
| type=2000 audit(1333417295.944:1): initialized | |
| Total HugeTLB memory allocated, 0 | |
| VFS: Disk quotas dquot_6.5.1 | |
| Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| SELinux: Registering netfilter hooks | |
| Initializing Cryptographic API | |
| alg: No test for crc32c (crc32c-generic) | |
| ksign: Installing public key data | |
| Loading keyring | |
| - Added public key 491CD8419FD68E33 | |
| - User ID: Red Hat, Inc. (Kernel Module GPG key) | |
| io scheduler noop registered | |
| io scheduler anticipatory registered | |
| io scheduler deadline registered | |
| io scheduler cfq registered (default) | |
| Boot video device is 0000:08:03.0 | |
| PCI: Setting latency timer of device 0000:00:01.0 to 64 | |
| PCI: Setting latency timer of device 0000:00:03.0 to 64 | |
| PCI: Setting latency timer of device 0000:00:04.0 to 64 | |
| PCI: Setting latency timer of device 0000:00:05.0 to 64 | |
| PCI: Setting latency timer of device 0000:00:06.0 to 64 | |
| PCI: Setting latency timer of device 0000:00:07.0 to 64 | |
| PCI: Setting latency timer of device 0000:00:09.0 to 64 | |
| pci_hotplug: PCI Hot Plug PCI Core version: 0.5 | |
| ACPI: CPU0 (power states: C1[C1] C2[C3]) | |
| ACPI: CPU1 (power states: C1[C1] C2[C3]) | |
| ACPI: CPU2 (power states: C1[C1] C2[C3]) | |
| ACPI: CPU3 (power states: C1[C1] C2[C3]) | |
| ACPI: CPU4 (power states: C1[C1] C2[C3]) | |
| ACPI: CPU5 (power states: C1[C1] C2[C3]) | |
| ACPI: CPU6 (power states: C1[C1] C2[C3]) | |
| ACPI: CPU7 (power states: C1[C1] C2[C3]) | |
| ACPI: CPU8 (power states: C1[C1] C2[C3]) | |
| ACPI: CPU9 (power states: C1[C1] C2[C3]) | |
| ACPI: CPU10 (power states: C1[C1] C2[C3]) | |
| ACPI: CPU11 (power states: C1[C1] C2[C3]) | |
| Real Time Clock Driver v1.12ac | |
| hpet_resources: 0xfed00000 is busy | |
| Non-volatile memory driver v1.2 | |
| Linux agpgart interface v0.101 (c) Dave Jones | |
| Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled | |
| serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A | |
| serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A | |
| 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A | |
| 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A | |
| brd: module loaded | |
| Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 | |
| ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx | |
| Probing IDE interface ide0... | |
| Probing IDE interface ide1... | |
| ide-floppy driver 0.99.newide | |
| usbcore: registered new driver hiddev | |
| usbcore: registered new driver usbhid | |
| drivers/usb/input/hid-core.c: v2.6:USB HID core driver | |
| PNP: No PS/2 controller found. Probing ports directly. | |
| serio: i8042 KBD port at 0x60,0x64 irq 1 | |
| serio: i8042 AUX port at 0x60,0x64 irq 12 | |
| mice: PS/2 mouse device common for all mice | |
| md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 | |
| md: bitmap version 4.39 | |
| TCP bic registered | |
| Initializing IPsec netlink socket | |
| NET: Registered protocol family 1 | |
| NET: Registered protocol family 17 | |
| ACPI: (supports S0 S4 S5) | |
| Initalizing network drop monitor service | |
| Freeing unused kernel memory: 212k freed | |
| Write protecting the kernel read-only data: 504k | |
| GSI 17 sharing vector 0x32 and IRQ 17 | |
| ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 19 (level, low) -> IRQ 50 | |
| PCI: Setting latency timer of device 0000:00:1a.7 to 64 | |
| ehci_hcd 0000:00:1a.7: EHCI Host Controller | |
| ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 | |
| ehci_hcd 0000:00:1a.7: debug port 1 | |
| PCI: cache line size of 32 is not supported by device 0000:00:1a.7 | |
| ehci_hcd 0000:00:1a.7: irq 50, io mem 0xdf0df800 | |
| ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 | |
| usb usb1: configuration #1 chosen from 1 choice | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 4 ports detected | |
| GSI 18 sharing vector 0x3A and IRQ 18 | |
| ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 58 | |
| PCI: Setting latency timer of device 0000:00:1d.7 to 64 | |
| ehci_hcd 0000:00:1d.7: EHCI Host Controller | |
| ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 | |
| ehci_hcd 0000:00:1d.7: debug port 1 | |
| PCI: cache line size of 32 is not supported by device 0000:00:1d.7 | |
| ehci_hcd 0000:00:1d.7: irq 58, io mem 0xdf0dfc00 | |
| ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 | |
| usb usb2: configuration #1 chosen from 1 choice | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 4 ports detected | |
| ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) | |
| USB Universal Host Controller Interface driver v3.0 | |
| GSI 19 sharing vector 0x42 and IRQ 19 | |
| ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 17 (level, low) -> IRQ 66 | |
| PCI: Setting latency timer of device 0000:00:1a.0 to 64 | |
| uhci_hcd 0000:00:1a.0: UHCI Host Controller | |
| uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 | |
| uhci_hcd 0000:00:1a.0: irq 66, io base 0x0000ec40 | |
| usb usb3: configuration #1 chosen from 1 choice | |
| hub 3-0:1.0: USB hub found | |
| hub 3-0:1.0: 2 ports detected | |
| usb 1-3: new high speed USB device using ehci_hcd and address 2 | |
| GSI 20 sharing vector 0x4A and IRQ 20 | |
| ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 18 (level, low) -> IRQ 74 | |
| PCI: Setting latency timer of device 0000:00:1a.1 to 64 | |
| uhci_hcd 0000:00:1a.1: UHCI Host Controller | |
| uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 | |
| uhci_hcd 0000:00:1a.1: irq 74, io base 0x0000ec60 | |
| usb usb4: configuration #1 chosen from 1 choice | |
| hub 4-0:1.0: USB hub found | |
| hub 4-0:1.0: 2 ports detected | |
| usb 1-3: configuration #1 chosen from 1 choice | |
| hub 1-3:1.0: USB hub found | |
| hub 1-3:1.0: 3 ports detected | |
| ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 58 | |
| PCI: Setting latency timer of device 0000:00:1d.0 to 64 | |
| uhci_hcd 0000:00:1d.0: UHCI Host Controller | |
| uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 | |
| uhci_hcd 0000:00:1d.0: irq 58, io base 0x0000ec80 | |
| usb usb5: configuration #1 chosen from 1 choice | |
| hub 5-0:1.0: USB hub found | |
| hub 5-0:1.0: 2 ports detected | |
| GSI 21 sharing vector 0x52 and IRQ 21 | |
| ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 82 | |
| PCI: Setting latency timer of device 0000:00:1d.1 to 64 | |
| uhci_hcd 0000:00:1d.1: UHCI Host Controller | |
| uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 | |
| uhci_hcd 0000:00:1d.1: irq 82, io base 0x0000eca0 | |
| usb usb6: configuration #1 chosen from 1 choice | |
| hub 6-0:1.0: USB hub found | |
| hub 6-0:1.0: 2 ports detected | |
| SCSI subsystem initialized | |
| megasas: 00.00.04.17-RH1 Wed. Nov. 25, 11:41:51 PST 2009 | |
| megasas: 0x1000:0x0079:0x1028:0x1f17: bus 3:slot 0:func 0 | |
| GSI 22 sharing vector 0x5A and IRQ 22 | |
| ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 33 (level, low) -> IRQ 90 | |
| PCI: Setting latency timer of device 0000:03:00.0 to 64 | |
| megasas: FW now in Ready state | |
| scsi0 : LSI SAS based MegaRAID driver | |
| Vendor: SEAGATE Model: ST9146803SS Rev: FS62 | |
| Type: Direct-Access ANSI SCSI revision: 05 | |
| Vendor: SEAGATE Model: ST9146803SS Rev: FS62 | |
| Type: Direct-Access ANSI SCSI revision: 05 | |
| Vendor: SEAGATE Model: ST32000444SS Rev: KS65 | |
| Type: Direct-Access ANSI SCSI revision: 05 | |
| Vendor: SEAGATE Model: ST32000444SS Rev: KS64 | |
| Type: Direct-Access ANSI SCSI revision: 05 | |
| Vendor: SEAGATE Model: ST32000444SS Rev: KS64 | |
| Type: Direct-Access ANSI SCSI revision: 05 | |
| Vendor: SEAGATE Model: ST32000444SS Rev: KS64 | |
| Type: Direct-Access ANSI SCSI revision: 05 | |
| Vendor: DP Model: BACKPLANE Rev: 1.07 | |
| Type: Enclosure ANSI SCSI revision: 05 | |
| Vendor: DELL Model: PERC H700 Rev: 2.30 | |
| Type: Direct-Access ANSI SCSI revision: 05 | |
| SCSI device sda: 285474816 512-byte hdwr sectors (146163 MB) | |
| sda: Write Protect is off | |
| sda: Mode Sense: 1f 00 00 08 | |
| SCSI device sda: drive cache: write back | |
| SCSI device sda: 285474816 512-byte hdwr sectors (146163 MB) | |
| sda: Write Protect is off | |
| sda: Mode Sense: 1f 00 00 08 | |
| SCSI device sda: drive cache: write back | |
| sda: sda1 sda2 | |
| sd 0:2:0:0: Attached scsi disk sda | |
| Vendor: DELL Model: PERC H700 Rev: 2.30 | |
| Type: Direct-Access ANSI SCSI revision: 05 | |
| sdb : very big device. try to use READ CAPACITY(16). | |
| SCSI device sdb: 11717836800 512-byte hdwr sectors (5999532 MB) | |
| sdb: Write Protect is off | |
| sdb: Mode Sense: 1f 00 00 08 | |
| SCSI device sdb: drive cache: write back | |
| sdb : very big device. try to use READ CAPACITY(16). | |
| SCSI device sdb: 11717836800 512-byte hdwr sectors (5999532 MB) | |
| sdb: Write Protect is off | |
| sdb: Mode Sense: 1f 00 00 08 | |
| SCSI device sdb: drive cache: write back | |
| sdb: unknown partition table | |
| sd 0:2:1:0: Attached scsi disk sdb | |
| shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 | |
| libata version 3.00 loaded. | |
| ata_piix 0000:00:1f.2: version 2.12 | |
| GSI 23 sharing vector 0x62 and IRQ 23 | |
| ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 23 (level, low) -> IRQ 98 | |
| ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] | |
| usb 5-2: new full speed USB device using uhci_hcd and address 2 | |
| PCI: Setting latency timer of device 0000:00:1f.2 to 64 | |
| scsi1 : ata_piix | |
| scsi2 : ata_piix | |
| ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 98 | |
| ata2: SATA max UDMA/133 cmd 0xec18 ctl 0xec0c bmdma 0xec28 irq 98 | |
| usb 5-2: configuration #1 chosen from 1 choice | |
| input: Avocent USB Composite Device-0 as /class/input/input0 | |
| input: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2 | |
| input: Avocent USB Composite Device-0 as /class/input/input1 | |
| input: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2 | |
| ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) | |
| ata1.00: ATAPI: TEAC DVD-ROM DV-28SW, R.2A, max UDMA/100 | |
| ata1.00: configured for UDMA/100 | |
| ata2: SATA link down (SStatus 4 SControl 0) | |
| Vendor: TEAC Model: DVD-ROM DV-28SW Rev: R.2A | |
| Type: CD-ROM ANSI SCSI revision: 05 | |
| device-mapper: uevent: version 1.0.3 | |
| device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com | |
| device-mapper: dm-raid45: initialized v0.2594l | |
| EXT3-fs: INFO: recovery required on readonly filesystem. | |
| EXT3-fs: write access will be enabled during recovery. | |
| kjournald starting. Commit interval 5 seconds | |
| EXT3-fs: sda1: orphan cleanup on readonly fs | |
| ext3_orphan_cleanup: deleting unreferenced inode 20283406 | |
| ext3_orphan_cleanup: deleting unreferenced inode 20283403 | |
| ext3_orphan_cleanup: deleting unreferenced inode 20283402 | |
| EXT3-fs: sda1: 3 orphan inodes deleted | |
| EXT3-fs: recovery complete. | |
| EXT3-fs: mounted filesystem with ordered data mode. | |
| SELinux: Disabled at runtime. | |
| SELinux: Unregistering netfilter hooks | |
| type=1404 audit(1333417320.185:2): selinux=0 auid=4294967295 ses=4294967295 | |
| input: PC Speaker as /class/input/input2 | |
| Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009) | |
| GSI 24 sharing vector 0x6A and IRQ 24 | |
| ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 36 (level, low) -> IRQ 106 | |
| PCI: Setting latency timer of device 0000:01:00.0 to 64 | |
| eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 106, node addr 842b2b0699fc | |
| GSI 25 sharing vector 0x72 and IRQ 25 | |
| ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 48 (level, low) -> IRQ 114 | |
| PCI: Setting latency timer of device 0000:01:00.1 to 64 | |
| eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 114, node addr 842b2b0699fe | |
| GSI 26 sharing vector 0x7A and IRQ 26 | |
| ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 32 (level, low) -> IRQ 122 | |
| PCI: Setting latency timer of device 0000:02:00.0 to 64 | |
| eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 122, node addr 842b2b069a00 | |
| GSI 27 sharing vector 0x82 and IRQ 27 | |
| ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 42 (level, low) -> IRQ 130 | |
| PCI: Setting latency timer of device 0000:02:00.1 to 64 | |
| eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 130, node addr 842b2b069a02 | |
| scsi 0:0:32:0: Attached scsi generic sg0 type 13 | |
| sd 0:2:0:0: Attached scsi generic sg1 type 0 | |
| sd 0:2:1:0: Attached scsi generic sg2 type 0 | |
| scsi 1:0:0:0: Attached scsi generic sg3 type 5 | |
| sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray | |
| Uniform CD-ROM driver Revision: 3.20 | |
| sr 1:0:0:0: Attached scsi CD-ROM sr0 | |
| floppy0: no floppy controllers found | |
| lp: driver loaded but no devices found | |
| ACPI: Power Button (FF) [PWRF] | |
| ACPI: Mapper loaded | |
| dell-wmi: No known WMI GUID found | |
| ACPI Exception (evregion-0424): AE_SUPPORT, Returned by Handler for [DataTable] [20060707] | |
| ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff81033005d8b0), AE_SUPPORT | |
| ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff81033005d8f0), AE_SUPPORT | |
| ACPI Exception (power_meter-0759): AE_SUPPORT, Evaluating _PMC [20060707] | |
| Device 'power_meter0' does not have a release() function, it is broken and must be fixed. | |
| BUG: warning at drivers/base/core.c:101/device_release() (Not tainted) | |
| Call Trace: | |
| [<ffffffff80150c09>] kobject_cleanup+0x53/0x7e | |
| [<ffffffff80150c34>] kobject_release+0x0/0x9 | |
| [<ffffffff80035400>] kref_put+0x6f/0x7a | |
| [<ffffffff882ba0ed>] :power_meter:acpi_power_meter_add+0x158/0x16f | |
| [<ffffffff801a0378>] acpi_bus_driver_init+0x30/0x57 | |
| [<ffffffff801a1596>] acpi_bus_register_driver+0x95/0xd4 | |
| [<ffffffff881c4032>] :power_meter:acpi_power_meter_init+0x25/0x34 | |
| [<ffffffff800a6efa>] sys_init_module+0xaf/0x1f2 | |
| [<ffffffff8005d116>] system_call+0x7e/0x83 | |
| md: Autodetecting RAID arrays. | |
| md: autorun ... | |
| md: ... autorun DONE. | |
| device-mapper: multipath: version 1.0.5 loaded | |
| loop: loaded (max 8 devices) | |
| EXT3 FS on sda1, internal journal | |
| kjournald starting. Commit interval 5 seconds | |
| EXT3 FS on sdb, internal journal | |
| EXT3-fs: mounted filesystem with ordered data mode. | |
| Adding 25599568k swap on /dev/sda2. Priority:-1 extents:1 across:25599568k | |
| IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com> | |
| bnx2: eth0: using MSIX | |
| bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON | |
| ipmi message handler version 39.1 | |
| IPMI System Interface driver. | |
| ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0 | |
| ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20) | |
| IPMI kcs interface initialized | |
| ipmi device interface | |
| Fusion MPT base driver 3.04.13rh | |
| Copyright (c) 1999-2008 LSI Corporation | |
| Fusion MPT misc device (ioctl) driver 3.04.13rh | |
| mptctl: Registered with Fusion MPT base driver | |
| mptctl: /dev/mptctl @ (major,minor=10,220) | |
| megasas: fasync_helper was not called first | |
| IPMI System Interface driver. | |
| ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0 | |
| ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20) | |
| IPMI kcs interface initialized |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment