-
-
Save elmiko/bb7be3694a39fbdc083f to your computer and use it in GitHub Desktop.
worker node boot log
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Initializing cgroup subsys cpuset | |
| Initializing cgroup subsys cpu | |
| Linux version 2.6.32-431.11.2.el6.x86_64 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Tue Mar 25 19:59:55 UTC 2014 | |
| Command line: ro root=LABEL=cloudimg-rootfs console=tty0 console=ttyS0,115200 initrd=/boot/initramfs-2.6.32-431.11.2.el6.x86_64.img BOOT_IMAGE=/boot/vmlinuz-2.6.32-431.11.2.el6.x86_64 | |
| KERNEL supported cpus: | |
| Intel GenuineIntel | |
| AMD AuthenticAMD | |
| Centaur CentaurHauls | |
| BIOS-provided physical RAM map: | |
| BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) | |
| BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) | |
| BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) | |
| BIOS-e820: 0000000000100000 - 000000007fffe000 (usable) | |
| BIOS-e820: 000000007fffe000 - 0000000080000000 (reserved) | |
| BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) | |
| DMI 2.4 present. | |
| SMBIOS version 2.4 @ 0xF17C0 | |
| last_pfn = 0x7fffe max_arch_pfn = 0x400000000 | |
| x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 | |
| init_memory_mapping: 0000000000000000-000000007fffe000 | |
| RAMDISK: 7f27d000 - 7fffcd76 | |
| ACPI: RSDP 00000000000f1640 00014 (v00 BOCHS ) | |
| ACPI: RSDT 000000007fffe450 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) | |
| ACPI: FACP 000000007fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) | |
| ACPI: DSDT 000000007fffe490 01137 (v01 BXPC BXDSDT 00000001 INTL 20140114) | |
| ACPI: FACS 000000007fffff40 00040 | |
| ACPI: SSDT 000000007ffff700 00838 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) | |
| ACPI: APIC 000000007ffff610 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) | |
| ACPI: HPET 000000007ffff5d0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) | |
| Setting APIC routing to flat. | |
| No NUMA configuration found | |
| Faking a node at 0000000000000000-000000007fffe000 | |
| Bootmem setup node 0 0000000000000000-000000007fffe000 | |
| NODE_DATA [000000000000a000 - 000000000003dfff] | |
| bootmap [000000000003e000 - 000000000004dfff] pages 10 | |
| (7 early reservations) ==> bootmem [0000000000 - 007fffe000] | |
| #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] | |
| #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] | |
| #2 [0001000000 - 0002020aa4] TEXT DATA BSS ==> [0001000000 - 0002020aa4] | |
| #3 [007f27d000 - 007fffcd76] RAMDISK ==> [007f27d000 - 007fffcd76] | |
| #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] | |
| #5 [0002021000 - 00020210b9] BRK ==> [0002021000 - 00020210b9] | |
| #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] | |
| found SMP MP-table at [ffff8800000f17e0] f17e0 | |
| Zone PFN ranges: | |
| DMA 0x00000001 -> 0x00001000 | |
| DMA32 0x00001000 -> 0x00100000 | |
| Normal 0x00100000 -> 0x00100000 | |
| Movable zone start PFN for each node | |
| early_node_map[2] active PFN ranges | |
| 0: 0x00000001 -> 0x0000009f | |
| 0: 0x00000100 -> 0x0007fffe | |
| ACPI: PM-Timer IO Port: 0xb008 | |
| Setting APIC routing to flat. | |
| ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) | |
| ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) | |
| ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) | |
| IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) | |
| Using ACPI (MADT) for SMP configuration information | |
| ACPI: HPET id: 0x8086a201 base: 0xfed00000 | |
| SMP: Allowing 1 CPUs, 0 hotplug CPUs | |
| PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 | |
| PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 | |
| PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 | |
| Allocating PCI resources starting at 80000000 (gap: 80000000:7ffc0000) | |
| Booting paravirtualized kernel on bare hardware | |
| NR_CPUS:4096 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 | |
| PERCPU: Embedded 31 pages/cpu @ffff880002200000 s94872 r8192 d23912 u2097152 | |
| pcpu-alloc: s94872 r8192 d23912 u2097152 alloc=1*2097152 | |
| pcpu-alloc: [0] 0 | |
| Built 1 zonelists in Node order, mobility grouping on. Total pages: 516919 | |
| Policy zone: DMA32 | |
| Kernel command line: ro root=LABEL=cloudimg-rootfs console=tty0 console=ttyS0,115200 initrd=/boot/initramfs-2.6.32-431.11.2.el6.x86_64.img BOOT_IMAGE=/boot/vmlinuz-2.6.32-431.11.2.el6.x86_64 | |
| PID hash table entries: 4096 (order: 3, 32768 bytes) | |
| Checking aperture... | |
| No AGP bridge found | |
| AMD-Vi disabled by default: pass amd_iommu=on to enable | |
| Memory: 2037108k/2097144k available (5326k kernel code, 392k absent, 59644k reserved, 7012k data, 1280k init) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:33024 nr_irqs:256 | |
| Console: colour VGA+ 80x25 | |
| console [tty0] enabled | |
| console [ttyS0] enabled | |
| allocated 8388608 bytes of page_cgroup | |
| please try 'cgroup_disable=memory' option if you don't want memory cgroups | |
| Fast TSC calibration using PIT | |
| Detected 2693.768 MHz processor. | |
| Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.53 BogoMIPS (lpj=2693768) | |
| pid_max: default: 32768 minimum: 301 | |
| Security Framework initialized | |
| SELinux: Initializing. | |
| Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) | |
| Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) | |
| Mount-cache hash table entries: 256 | |
| Initializing cgroup subsys ns | |
| Initializing cgroup subsys cpuacct | |
| Initializing cgroup subsys memory | |
| Initializing cgroup subsys devices | |
| Initializing cgroup subsys freezer | |
| Initializing cgroup subsys net_cls | |
| Initializing cgroup subsys blkio | |
| Initializing cgroup subsys perf_event | |
| Initializing cgroup subsys net_prio | |
| mce: CPU supports 10 MCE banks | |
| alternatives: switching to unfair spinlock | |
| SMP alternatives: switching to UP code | |
| Freeing SMP alternatives: 36k freed | |
| ACPI: Core revision 20090903 | |
| ftrace: converting mcount calls to 0f 1f 44 00 00 | |
| ftrace: allocating 21777 entries in 86 pages | |
| APIC routing finalized to flat. | |
| ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 | |
| CPU0: AMD QEMU Virtual CPU version 1.6.2 stepping 03 | |
| Performance Events: Broken PMU hardware detected, using software events only. | |
| NMI watchdog disabled (cpu0): hardware events not enabled | |
| Brought up 1 CPUs | |
| Total of 1 processors activated (5387.53 BogoMIPS). | |
| devtmpfs: initialized | |
| regulator: core version 0.5 | |
| NET: Registered protocol family 16 | |
| ACPI: bus type pci registered | |
| PCI: Using configuration type 1 for base access | |
| bio: create slab <bio-0> at 0 | |
| ACPI: Interpreter enabled | |
| ACPI: (supports S0 S3 S4 S5) | |
| ACPI: Using IOAPIC for interrupt routing | |
| ACPI: No dock devices found. | |
| PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug | |
| ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) | |
| pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] | |
| pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] | |
| pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] | |
| pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] | |
| PCI host bridge to bus 0000:00 | |
| pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] | |
| pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] | |
| pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] | |
| pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] | |
| pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI | |
| pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB | |
| ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) | |
| ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) | |
| ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) | |
| ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) | |
| ACPI: PCI Interrupt Link [LNKS] (IRQs *9) | |
| vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none | |
| vgaarb: loaded | |
| vgaarb: bridge control possible 0000:00:02.0 | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| PCI: Using ACPI for IRQ routing | |
| NetLabel: Initializing | |
| NetLabel: domain hash size = 128 | |
| NetLabel: protocols = UNLABELED CIPSOv4 | |
| NetLabel: unlabeled traffic allowed by default | |
| HPET: 3 timers in total, 0 timers will be used for per-cpu timer | |
| hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 | |
| hpet0: 3 comparators, 64-bit 100.000000 MHz counter | |
| Switching to clocksource hpet | |
| pnp: PnP ACPI init | |
| ACPI: bus type pnp registered | |
| pnp: PnP ACPI: found 9 devices | |
| ACPI: ACPI bus type pnp unregistered | |
| NET: Registered protocol family 2 | |
| IP route cache hash table entries: 65536 (order: 7, 524288 bytes) | |
| TCP established hash table entries: 262144 (order: 10, 4194304 bytes) | |
| TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) | |
| TCP: Hash tables configured (established 262144 bind 65536) | |
| TCP reno registered | |
| NET: Registered protocol family 1 | |
| pci 0000:00:00.0: Limiting direct PCI/PCI transfers | |
| pci 0000:00:01.0: PIIX3: Enabling Passive Release | |
| pci 0000:00:01.0: Activating ISA DMA hang workarounds | |
| ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 | |
| pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11 | |
| pci 0000:00:01.2: PCI INT D disabled | |
| Trying to unpack rootfs image as initramfs... | |
| Freeing initrd memory: 13823k freed | |
| audit: initializing netlink socket (disabled) | |
| type=2000 audit(1398351714.756:1): initialized | |
| HugeTLB registered 2 MB page size, pre-allocated 0 pages | |
| VFS: Disk quotas dquot_6.5.2 | |
| Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| msgmni has been set to 4005 | |
| alg: No test for stdrng (krng) | |
| ksign: Installing public key data | |
| Loading keyring | |
| - Added public key 3BC36F007EF7D4EA | |
| - User ID: CentOS (Kernel Module GPG key) | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler anticipatory registered | |
| io scheduler deadline registered | |
| io scheduler cfq registered (default) | |
| pci_hotplug: PCI Hot Plug PCI Core version: 0.5 | |
| pciehp: PCI Express Hot Plug Controller Driver version: 0.4 | |
| acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 | |
| acpiphp: Slot [3] registered | |
| acpiphp: Slot [4] registered | |
| acpiphp: Slot [5] registered | |
| acpiphp: Slot [6] registered | |
| acpiphp: Slot [7] registered | |
| acpiphp: Slot [8] registered | |
| acpiphp: Slot [9] registered | |
| acpiphp: Slot [10] registered | |
| acpiphp: Slot [11] registered | |
| acpiphp: Slot [12] registered | |
| acpiphp: Slot [13] registered | |
| acpiphp: Slot [14] registered | |
| acpiphp: Slot [15] registered | |
| acpiphp: Slot [16] registered | |
| acpiphp: Slot [17] registered | |
| acpiphp: Slot [18] registered | |
| acpiphp: Slot [19] registered | |
| acpiphp: Slot [20] registered | |
| acpiphp: Slot [21] registered | |
| acpiphp: Slot [22] registered | |
| acpiphp: Slot [23] registered | |
| acpiphp: Slot [24] registered | |
| acpiphp: Slot [25] registered | |
| acpiphp: Slot [26] registered | |
| acpiphp: Slot [27] registered | |
| acpiphp: Slot [28] registered | |
| acpiphp: Slot [29] registered | |
| acpiphp: Slot [30] registered | |
| acpiphp: Slot [31] registered | |
| ipmi message handler version 39.2 | |
| IPMI System Interface driver. | |
| ipmi_si: Adding default-specified kcs state machine | |
| ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 | |
| ipmi_si: Interface detection failed | |
| ipmi_si: Adding default-specified smic state machine | |
| ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 | |
| ipmi_si: Interface detection failed | |
| ipmi_si: Adding default-specified bt state machine | |
| ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 | |
| ipmi_si: Interface detection failed | |
| ipmi_si: Unable to find any System Interface(s) | |
| input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 | |
| ACPI: Power Button [PWRF] | |
| ACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386) | |
| GHES: HEST is not enabled! | |
| Non-volatile memory driver v1.3 | |
| Linux agpgart interface v0.103 | |
| crash memory driver: version 1.1 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| ?serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A | |
| serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A | |
| 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A | |
| 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A | |
| brd: module loaded | |
| loop: module loaded | |
| input: Macintosh mouse button emulation as /devices/virtual/input/input1 | |
| Fixed MDIO Bus: probed | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| uhci_hcd: USB Universal Host Controller Interface driver | |
| uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11 | |
| uhci_hcd 0000:00:01.2: UHCI Host Controller | |
| uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 | |
| uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: UHCI Host Controller | |
| usb usb1: Manufacturer: Linux 2.6.32-431.11.2.el6.x86_64 uhci_hcd | |
| usb usb1: SerialNumber: 0000:00:01.2 | |
| usb usb1: configuration #1 chosen from 1 choice | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 2 ports detected | |
| PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 | |
| serio: i8042 KBD port at 0x60,0x64 irq 1 | |
| serio: i8042 AUX port at 0x60,0x64 irq 12 | |
| mice: PS/2 mouse device common for all mice | |
| input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 | |
| rtc_cmos 00:01: RTC can wake from S4 | |
| rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 | |
| rtc0: alarms up to one day, 114 bytes nvram, hpet irqs | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| EFI Variables Facility v0.08 2004-May-17 | |
| usbcore: registered new interface driver hiddev | |
| usbcore: registered new interface driver usbhid | |
| usbhid: v2.6:USB HID core driver | |
| GRE over IPv4 demultiplexor driver | |
| TCP cubic registered | |
| Initializing XFRM netlink socket | |
| NET: Registered protocol family 17 | |
| registered taskstats version 1 | |
| rtc_cmos 00:01: setting system clock to 2014-04-24 15:01:56 UTC (1398351716) | |
| Initalizing network drop monitor service | |
| Freeing unused kernel memory: 1280k freed | |
| Write protecting the kernel read-only data: 10240k | |
| Freeing unused kernel memory: 800k freed | |
| Freeing unused kernel memory: 1584k freed | |
| Refined TSC clocksource calibration: 2693.778 MHz. | |
| Switching to clocksource tsc | |
| dracut: dracut-004-336.el6_5.2 | |
| input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 | |
| udev: starting version 147 | |
| dracut: Starting plymouth daemon | |
| scsi0 : ata_piix | |
| scsi1 : ata_piix | |
| ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14 | |
| ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15 | |
| ata2.01: ATAPI: QEMU DVD-ROM, 1.6.2, max UDMA/100 | |
| ata2.01: configured for MWDMA2 | |
| scsi 1:0:1:0: CD-ROM QEMU QEMU DVD-ROM 1.6. PQ: 0 ANSI: 5 | |
| ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 | |
| virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10 | |
| virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11 | |
| ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 | |
| virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10 | |
| %G vda: vda1 | |
| sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray | |
| Uniform CD-ROM driver Revision: 3.20 | |
| EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: | |
| dracut: Mounted root filesystem /dev/vda1 | |
| dracut: Loading SELinux policy | |
| type=1404 audit(1398351725.375:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 | |
| type=1403 audit(1398351728.643:3): policy loaded auid=4294967295 ses=4294967295 | |
| dracut: | |
| dracut: Switching root | |
| Welcome to CentOS | |
| Starting udev: udev: starting version 147 | |
| sr 1:0:1:0: Attached scsi generic sg0 type 5 | |
| piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 | |
| parport_pc 00:05: reported by Plug and Play ACPI | |
| %Gppdev: user-space parallel port driver | |
| [ OK ] | |
| Setting hostname localhost.localdomain: [ OK ] | |
| device-mapper: uevent: version 1.0.3 | |
| device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com | |
| Checking filesystems | |
| Checking all file systems. | |
| [ OK ] | |
| Remounting root filesystem in read-write mode: [ OK ] | |
| Mounting local filesystems: [ OK ] | |
| Enabling /etc/fstab swaps: [ OK ] | |
| Entering non-interactive startup | |
| NET: Registered protocol family 10 | |
| lo: Disabled Privacy Extensions | |
| Bringing up loopback interface: [ OK ] | |
| Bringing up interface eth0: | |
| Determining IP information for eth0... done. | |
| [ OK ] | |
| Starting auditd: [ OK ] | |
| Starting portreserve: [ OK ] | |
| Starting system logger: [ OK ] | |
| Starting system message bus: [ OK ] | |
| Starting cups: [ OK ] | |
| Mounting filesystems: [ OK ] | |
| Retrigger failed udev events[ OK ] | |
| Adding udev persistent rulesAdding udev persistent rules[ OK ] | |
| Starting cloud-init: /usr/lib/python2.6/site-packages/cloudinit/url_helper.py:40: UserWarning: Module backports was already imported from /usr/lib64/python2.6/site-packages/backports/__init__.pyc, but /usr/lib/python2.6/site-packages is being added to sys.path | |
| import pkg_resources | |
| Cloud-init v. 0.7.4 running 'init-local' at Thu, 24 Apr 2014 15:03:43 +0000. Up 109.61 seconds. | |
| Starting cloud-init: /usr/lib/python2.6/site-packages/cloudinit/url_helper.py:40: UserWarning: Module backports was already imported from /usr/lib64/python2.6/site-packages/backports/__init__.pyc, but /usr/lib/python2.6/site-packages is being added to sys.path | |
| import pkg_resources | |
| Cloud-init v. 0.7.4 running 'init' at Thu, 24 Apr 2014 15:03:55 +0000. Up 121.20 seconds. | |
| ci-info: ++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++ | |
| ci-info: +--------+------+-------------+---------------+-------------------+ | |
| ci-info: | Device | Up | Address | Mask | Hw-Address | | |
| ci-info: +--------+------+-------------+---------------+-------------------+ | |
| ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | . | | |
| ci-info: | eth0 | True | 172.31.1.10 | 255.255.255.0 | fa:16:3e:a6:93:f1 | | |
| ci-info: +--------+------+-------------+---------------+-------------------+ | |
| ci-info: +++++++++++++++++++++++++++++++Route info+++++++++++++++++++++++++++++++ | |
| ci-info: +-------+-------------+------------+---------------+-----------+-------+ | |
| ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags | | |
| ci-info: +-------+-------------+------------+---------------+-----------+-------+ | |
| ci-info: | 0 | 172.31.1.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U | | |
| ci-info: | 1 | 0.0.0.0 | 172.31.1.1 | 0.0.0.0 | eth0 | UG | | |
| ci-info: +-------+-------------+------------+---------------+-----------+-------+ | |
| 2014-04-24 15:04:06,095 - cloud-init[WARNING]: Stdout, stderr changing to (| tee -a /var/log/cloud-init-output.log, | tee -a /var/log/cloud-init-output.log) | |
| Starting cloud-init: /usr/lib/python2.6/site-packages/cloudinit/url_helper.py:40: UserWarning: Module backports was already imported from /usr/lib64/python2.6/site-packages/backports/__init__.pyc, but /usr/lib/python2.6/site-packages is being added to sys.path | |
| import pkg_resources | |
| Cloud-init v. 0.7.4 running 'modules:config' at Thu, 24 Apr 2014 15:04:13 +0000. Up 139.07 seconds. | |
| Starting cloud-init: /usr/lib/python2.6/site-packages/cloudinit/url_helper.py:40: UserWarning: Module backports was already imported from /usr/lib64/python2.6/site-packages/backports/__init__.pyc, but /usr/lib/python2.6/site-packages is being added to sys.path | |
| import pkg_resources | |
| Cloud-init v. 0.7.4 running 'modules:final' at Thu, 24 Apr 2014 15:04:25 +0000. Up 151.38 seconds. | |
| Provision began: 2014-04-24 15:04:31.108736 | |
| /var/lib/heat-cfntools/cfn-userdata | |
| Provision done: 2014-04-24 15:04:31.307763 | |
| ci-info: ++++++++++++++Authorized keys from /home/ec2-user/.ssh/authorized_keys for user ec2-user++++++++++++++ | |
| ci-info: +---------+-------------------------------------------------+---------+------------------------------+ | |
| ci-info: | Keytype | Fingerprint (md5) | Options | Comment | | |
| ci-info: +---------+-------------------------------------------------+---------+------------------------------+ | |
| ci-info: | ssh-rsa | 52:e1:01:8b:e4:aa:48:23:57:07:9a:eb:5d:3c:45:da | - | mimccune@mimccune.redhat.com | | |
| ci-info: | ssh-rsa | 9d:a8:78:80:83:3e:63:23:1b:3d:d6:dd:59:d3:54:b5 | - | Generated by Sahara | | |
| ci-info: +---------+-------------------------------------------------+---------+------------------------------+ | |
| ec2: | |
| ec2: ############################################################# | |
| ec2: -----BEGIN SSH HOST KEY FINGERPRINTS----- | |
| ec2: 1024 1a:a8:ed:97:66:45:32:fa:ad:02:cc:26:33:16:4e:4b /etc/ssh/ssh_host_dsa_key.pub (DSA) | |
| ec2: 2048 1b:eb:f0:76:10:7b:b2:ae:73:47:9a:93:05:90:3a:65 /etc/ssh/ssh_host_key.pub (RSA1) | |
| ec2: 2048 fb:e7:7c:0f:ac:89:dc:80:5c:9d:67:16:bd:20:21:1b /etc/ssh/ssh_host_rsa_key.pub (RSA) | |
| ec2: -----END SSH HOST KEY FINGERPRINTS----- | |
| ec2: ############################################################# | |
| -----BEGIN SSH HOST KEY KEYS----- | |
| 2048 35 23350674431519116210569239177135277297078579571373002623751601029270606572366440526972325712768758578372732461052320605452817402873508395149516344427595352311809993055952988224860734087066536599478612160689815450674399598990084148127613829823728399343711629653413565622790097839969882690563550324438839109691181408391596633753204824946928989076329432461024417996294848406629960601571583966644708566037602334406940114315251520972232148519350944327050011832912832712064433620882721017237656013068142571493978050644928200811640847938858393270937742743328243076075517030820749332769624320079421893412404865056514613178739 | |
| ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAl1hEi2htcPZmH7inbz97v/xmPZyM+Ihtsh4xXT16vSNUZuuuEEC0V+g2mWZFhTnsUNnTIdniMYCloLVOdixm1sCOoPmxHeojXlSZVPAqF0jF4yxmCGJS45hDS8C8CksdJfnTfBZNIsYj9x3IL07CEKKEsfTXgg8NhwttvkwPXItUvIA+i4axd3bbnEtvgEcX93+Nw6exwmKW7xZZP+EVdIpJWl6NK44LFtIsbQkOfzcIjbX33Dpdt4itm8oZHmZHvj0Ldzt6IDglrm2gmEay//ihrTdZqnV3mXx6eQ0T/T3gDtCrgo/FtoU/8ZTNaECCjw0Ne0J0ib24FHl8q5q/yQ== | |
| -----END SSH HOST KEY KEYS----- | |
| Cloud-init v. 0.7.4 finished at Thu, 24 Apr 2014 15:04:32 +0000. Datasource DataSourceConfigDriveNet [net,ver=2][source=/dev/sr0]. Up 158.75 seconds | |
| Starting ntpd: [ OK ] | |
| Starting GANGLIA gmond: [ OK ] | |
| Starting postfix: [ OK ] | |
| Starting crond: [ OK ] | |
| Verifying Python version compatibility... | |
| Using python /usr/bin/python2.6 | |
| Checking for previously running Ambari Agent... | |
| Starting ambari-agent | |
| Verifying ambari-agent process status... | |
| [1mAmbari Agent successfully started | |
| [0;10mAgent PID at: /var/run/ambari-agent/ambari-agent.pid | |
| Agent out at: /var/log/ambari-agent/ambari-agent.out | |
| Agent log at: /var/log/ambari-agent/ambari-agent.log | |
| Using python /usr/bin/python2.6 | |
| Starting ambari-server | |
| ERROR: Exiting with exit code 1. | |
| REASON: Unable to detect a system user for Ambari Server. | |
| - If this is a new setup, then run the "ambari-server setup" command to create the user | |
| - If this is an upgrade of an existing setup, run the "ambari-server upgrade" command. | |
| Refer to the Ambari documentation for more information on setup and upgrade. | |
| Starting atd: [ OK ] | |
| /etc/rc3.d/S95hadoop-mapreduce-historyserver: line 40: /usr/lib/bigtop-utils/bigtop-detect-javahome: No such file or directory | |
| Starting Hadoop historyserver:[ OK ] | |
| Error: JAVA_HOME is not set and could not be found. | |
| /etc/rc3.d/S95hadoop-yarn-nodemanager: line 40: /usr/lib/bigtop-utils/bigtop-detect-javahome: No such file or directory | |
| Starting Hadoop nodemanager:[ OK ] | |
| Error: JAVA_HOME is not set and could not be found. | |
| /etc/rc3.d/S95hadoop-yarn-proxyserver: line 40: /usr/lib/bigtop-utils/bigtop-detect-javahome: No such file or directory | |
| Starting Hadoop proxyserver:[ OK ] | |
| Error: JAVA_HOME is not set and could not be found. | |
| /etc/rc3.d/S95hadoop-yarn-resourcemanager: line 40: /usr/lib/bigtop-utils/bigtop-detect-javahome: No such file or directory | |
| Starting Hadoop resourcemanager:[ OK ] | |
| Error: JAVA_HOME is not set and could not be found. | |
| CentOS release 6.5 (Final) | |
| Kernel 2.6.32-431.11.2.el6.x86_64 on an x86_64 | |
| cluster-1-worker-node-001 login: |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment