Orange Pi Mini - boot serial output on Lubuntu 1404

U-Boot SPL 2014.04-10693-gf954935 (Aug 06 2014 - 11:18:37)
Board: Bananapi
DRAM: 1024 MiB
Failed to set core voltage! Can't set CPU frequency
spl: not an uImage at 1600


U-Boot 2014.04-10693-gf954935 (Aug 06 2014 - 11:18:37) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
Board: Bananapi
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   dwmac.1c50000
Hit any key to stop autoboot:  0 
reading uEnv.txt
344 bytes read in 17 ms (19.5 KiB/s)
Loaded environment from uEnv.txt
Running uenvcmd ...
reading /script.bin
50936 bytes read in 32 ms (1.5 MiB/s)
reading /uImage
4802280 bytes read in 555 ms (8.3 MiB/s)
## Booting kernel from Legacy Image at 48000000 ...
   Image Name:   Linux-3.4.90
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4802216 Bytes = 4.6 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK

Starting kernel ...

<6>Booting Linux on physical CPU 0
<6>Initializing cgroup subsys cpuset
<6>Initializing cgroup subsys cpu
<5>Linux version 3.4.90 (allwinner@steven) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP PREEMPT Fri Jan 23 10:35:42 HKT 2015
CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun7i
<6>Memory Reserved:
<6>     SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
<6>     VE   : 0x44000000 - 0x48ffffff  (  80 MB)
<6>     G2D  : 0x49000000 - 0x49ffffff  (  16 MB)
<6>     LCD  : 0x4a000000 - 0x4bffffff  (  32 MB)
Memory policy: ECC disabled, Data cache writealloc
<6>sunxi: Allwinner A20 (AW1651/sun7i) detected.
<7>On node 0 totalpages: 262144
<7>free_area_init_node: node 0, pgdat c0903780, node_mem_map d0000000
<7>  DMA zone: 512 pages used for memmap
<7>  DMA zone: 0 pages reserved
<7>  DMA zone: 65024 pages, LIFO batch:15
<7>  Normal zone: 1008 pages used for memmap
<7>  Normal zone: 128016 pages, LIFO batch:31
<7>  HighMem zone: 528 pages used for memmap
<7>  HighMem zone: 67056 pages, LIFO batch:15
<6>PERCPU: Embedded 7 pages/cpu @d0808000 s7616 r8192 d12864 u32768
<7>pcpu-alloc: s7616 r8192 d12864 u32768 alloc=8*4096<c>
<7>pcpu-alloc: <c>[0] <c>0 <c>[0] <c>1 <c>
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
<5>Kernel command line: console=ttyS0,115200 console=tty0 disp.screen0_output_mode=EDID:1280x720p60 hdmi.audio=EDID:0 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deat
<6>PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>allocated 2097152 bytes of page_cgroup
<6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
<6>Memory: 1024MB = 1024MB total
<5>Memory: 895192k/895192k available, 153384k reserved, 270336K highmem
<5>Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc085f2b0   (8541 kB)
      .init : 0xc0860000 - 0xc0898dc0   ( 228 kB)
      .data : 0xc089a000 - 0xc090ade8   ( 452 kB)
       .bss : 0xc090ae0c - 0xc0ada718   (1855 kB)
<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>Preemptible hierarchical RCU implementation.
<6>     RCU dyntick-idle grace-period acceleration is enabled.
<6>     Additional per-CPU info printed with stalls.
<6>NR_IRQS:192
<6>Architected local timer running at 24.00MHz.
<6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<2>start_kernel(): bug: interrupts were enabled early
<6>Console: colour dummy device 80x30
<6>console [tty0] enabled
<6>Calibrating delay loop... <c>761.03 BogoMIPS (lpj=3805184)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys memory
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>Initializing cgroup subsys blkio
<6>Initializing cgroup subsys perf_event
<6>CPU: Testing write buffer coherency: ok
<6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
<6>Setting up static identity map for 0x405c3458 - 0x405c34b0
CPU1: Booted secondary processor
<6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>Brought up 2 CPUs
<6>SMP: Total of 2 processors activated (1527.80 BogoMIPS).
<6>devtmpfs: initialized
<6>dummy: 
<6>NET: Registered protocol family 16
<6>DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[ccu-inf] aw clock manager init
<6>[ccu-inf] aw_ccu_init
<6>[ccu-inf] script config pll3 to 297MHz
<6>[ccu-inf] script config pll4 to 300MHz
<6>[ccu-inf] script config pll6 to 600MHz
<6>[ccu-inf] script config pll7 to 297MHz
<6>[ccu-inf] script config pll8 to 336MHz
<6>Init eGon pin module V2.0
<6>bio: create slab <bio-0> at 0
<6>sunxi_gpio driver init ver 1.3
<6>gpiochip_add: registered GPIOs 1 to 88 on device: A1X_GPIO
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>Linux media interface: v0.10
<6>Linux video capture interface: v2.00
<6>Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>Switching to clocksource arch_sys_counter
<5>FS-Cache: Loaded
<6>CacheFiles: Loaded
<6>cfg80211: Calling CRDA to update world regulatory domain
WRN:L287(/home/allwinner/workspace/bananapi/bananapi-bsp/linux-bananapi/drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: det_vbus pin is invaild
WRN:L426(/home/allwinner/workspace/bananapi/bananapi-bsp/linux-bananapi/drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: check_usb_board_info failed
WRN:L480(/home/allwinner/workspace/bananapi/bananapi-bsp/linux-bananapi/drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: get_usb_cfg failed
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP: reno registered
<6>UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(0.520:1): initialized
highmem bounce pool size: 64 pages
<5>VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
<5>NFS: Registering the id_resolver key type
<6>NTFS driver 2.1.30 [Flags: R/W].
<6>fuse init (API version 7.18)
<6>msgmni has been set to 1220
<3>alg: comp: Compression test 1 failed for lzo-generic: output len = 57
<6>alg: No test for stdrng (krng)
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>io scheduler noop registered
<6>io scheduler deadline registered (default)
<6>io scheduler cfq registered
<6>sunxi disp driver loaded (/dev/disp api 1.0)
<6>Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
<6>[uart]: used uart info.: 0x8d
<6>[uart]: serial probe 0 irq 33 mapbase 0x01c28000
<6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.90 (allwinner@steven) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP PREEMPT Fri Jan 23 10:35:42 HKT 2015
[    0.000000] Memory Reserved:
[    0.000000]  SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
[    0.000000]  VE   : 0x44000000 - 0x48ffffff  (  80 MB)
[    0.000000]  G2D  : 0x49000000 - 0x49ffffff  (  16 MB)
[    0.000000]  LCD  : 0x4a000000 - 0x4bffffff  (  32 MB)
[    0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
[    0.000000] PERCPU: Embedded 7 pages/cpu @d0808000 s7616 r8192 d12864 u32768
[    0.000000] Kernel command line: console=ttyS0,115200 console=tty0 disp.screen0_output_mode=EDID:1280x720p60 hdmi.audio=EDID:0 root=/dev/mmcblk0p2 rootfstype=ext4 t
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 1024MB = 1024MB total
[    0.000000] Memory: 895192k/895192k available, 153384k reserved, 270336K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc085f2b0   (8541 kB)
[    0.000000]       .init : 0xc0860000 - 0xc0898dc0   ( 228 kB)
[    0.000000]       .data : 0xc089a000 - 0xc090ade8   ( 452 kB)
[    0.000000]        .bss : 0xc090ae0c - 0xc0ada718   (1855 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  Additional per-CPU info printed with stalls.
[    0.000000] NR_IRQS:192
[    0.000000] Architected local timer running at 24.00MHz.
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] start_kernel(): bug: interrupts were enabled early
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.014518] Calibrating delay loop... 761.03 BogoMIPS (lpj=3805184)
[    0.055849] pid_max: default: 32768 minimum: 301
[    0.059752] Mount-cache hash table entries: 512
[    0.064849] Initializing cgroup subsys cpuacct
[    0.068213] Initializing cgroup subsys memory
[    0.071695] Initializing cgroup subsys devices
[    0.075185] Initializing cgroup subsys freezer
[    0.078447] Initializing cgroup subsys blkio
[    0.082179] Initializing cgroup subsys perf_event
[    0.085874] CPU: Testing write buffer coherency: ok
[    0.091193] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.098375] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[    0.104005] Setting up static identity map for 0x405c3458 - 0x405c34b0
[    0.259137] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.261182] Brought up 2 CPUs
[    0.266568] SMP: Total of 2 processors activated (1527.80 BogoMIPS).
[    0.270714] devtmpfs: initialized
[    0.281599] dummy: 
[    0.285552] NET: Registered protocol family 16
[    0.292133] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.300694] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.305552] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.308802] [ccu-inf] aw clock manager init
[    0.311109] [ccu-inf] aw_ccu_init
[    0.315215] [ccu-inf] script config pll3 to 297MHz
[    0.319010] [ccu-inf] script config pll4 to 300MHz
[    0.322831] [ccu-inf] script config pll6 to 600MHz
[    0.326621] [ccu-inf] script config pll7 to 297MHz
[    0.330407] [ccu-inf] script config pll8 to 336MHz
[    0.333315] Init eGon pin module V2.0
[    0.350855] bio: create slab <bio-0> at 0
[    0.354724] sunxi_gpio driver init ver 1.3
[    0.362035] gpiochip_add: registered GPIOs 1 to 88 on device: A1X_GPIO
[    0.365669] SCSI subsystem initialized
[    0.373472] usbcore: registered new interface driver usbfs
[    0.377987] usbcore: registered new interface driver hub
[    0.382287] usbcore: registered new device driver usb
[    0.385703] Linux media interface: v0.10
[    0.389395] Linux video capture interface: v2.00
[    0.395698] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.402118] Switching to clocksource arch_sys_counter
[    0.404497] FS-Cache: Loaded
[    0.406859] CacheFiles: Loaded
[    0.417639] cfg80211: Calling CRDA to update world regulatory domain
[    0.468867] NET: Registered protocol family 2
[    0.475473] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.482971] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.493213] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    0.501269] TCP: Hash tables configured (established 131072 bind 65536)
[    0.503503] TCP: reno registered
[    0.508449] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.513864] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.517879] NET: Registered protocol family 1
[    0.523558] RPC: Registered named UNIX socket transport module.
[    0.527340] RPC: Registered udp transport module.
[    0.531036] RPC: Registered tcp transport module.
[    0.536462] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.543098] audit: initializing netlink socket (disabled)
[    0.546982] type=2000 audit(0.520:1): initialized
[    0.574915] VFS: Disk quotas dquot_6.5.2
[    0.590688] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.596094] NFS: Registering the id_resolver key type
[    0.602169] NTFS driver 2.1.30 [Flags: R/W].
[    0.606375] fuse init (API version 7.18)
[    0.610588] msgmni has been set to 1220
[    0.625480] alg: comp: Compression test 1 failed for lzo-generic: output len = 57
[    0.628989] alg: No test for stdrng (krng)
[    0.635913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.638935] io scheduler noop registered
[    0.643065] io scheduler deadline registered (default)
[    0.646016] io scheduler cfq registered
[    0.651222] sunxi disp driver loaded (/dev/disp api 1.0)
[    0.657038] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[    0.672009] [uart]: used uart info.: 0x8d
[    0.676809] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
[    0.703389] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
<6>console [ttyS0] enabled
[    1.327479] console [ttyS0] enabled
<6>[uart]: serial probe 2 irq 35 mapbase 0x01c28800
[    1.336110] [uart]: serial probe 2 irq 35 mapbase 0x01c28800
<6>sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
[    1.368260] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
<6>[uart]: serial probe 3 irq 36 mapbase 0x01c28c00
[    1.380405] [uart]: serial probe 3 irq 36 mapbase 0x01c28c00
<6>sunxi-uart.3: ttyS2 at MMIO 0x1c28c00 (irq = 36) is a U6_16550A
[    1.412560] sunxi-uart.3: ttyS2 at MMIO 0x1c28c00 (irq = 36) is a U6_16550A
<6>[uart]: serial probe 7 irq 52 mapbase 0x01c29c00
[    1.424682] [uart]: serial probe 7 irq 52 mapbase 0x01c29c00
<6>sunxi-uart.7: ttyS3 at MMIO 0x1c29c00 (irq = 52) is a U6_16550A
[    1.456817] sunxi-uart.7: ttyS3 at MMIO 0x1c29c00 (irq = 52) is a U6_16550A
<7>G2D: drv_g2d_init
<6>G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
[    1.471818] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
<6>G2D: head:c9000000,tail:ca000000
[    1.480879] G2D: head:c9000000,tail:ca000000
<6>G2D: Module initialized.major:250
[    1.488584] G2D: Module initialized.major:250
<6>brd: module loaded
[    1.510376] brd: module loaded
<6>loop: module loaded
[    1.523657] loop: module loaded
<3>gpio count < =0 ,gpio_count is: 0
[    1.531121] gpio count < =0 ,gpio_count is: 0
<6>sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
[    1.541491] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
<4>sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
[    1.552790] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
<6>sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    1.565633] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
<6>sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc 
[    1.580604] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc 
<6>scsi0 : sw_ahci_platform
[    1.592144] scsi0 : sw_ahci_platform
<6>ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[    1.603320] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
<6>Fixed MDIO Bus: probed
[    1.617214] Fixed MDIO Bus: probed
<4>eth%d: device MAC address 02:d7:04:01:41:c7
[    1.625907] eth%d: device MAC address 02:d7:04:01:41:c7
gmac_para gpio count is 18
[gmac]: sun6i_gmac platform driver registration completed
<6>PPP generic driver version 2.4.2
[    1.643387] PPP generic driver version 2.4.2
<6>PPP BSD Compression module registered
[    1.651848] PPP BSD Compression module registered
<6>PPP Deflate Compression module registered
[    1.660641] PPP Deflate Compression module registered
<6>NET: Registered protocol family 24
[    1.669159] NET: Registered protocol family 24
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.679669] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.691533] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sw-ehci1]: open clock
[sw-ehci1]: Set USB Power ON
<6>sw-eh