Created
December 30, 2017 02:37
-
-
Save enkiusz/05f1d07ed184d585b430b03ef980963e to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.12.5-gentoo-newton] (local build) | |
| Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate Barracuda 7200.10 | |
| Device Model: ST3160815AS | |
| Serial Number: 9RXGHFCQ | |
| Firmware Version: 4.ADA | |
| User Capacity: 160,000,000,000 bytes [160 GB] | |
| Sector Size: 512 bytes logical/physical | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA/ATAPI-7 (minor revision not indicated) | |
| Local Time is: Sat Dec 30 02:08:48 2017 CET | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| AAM feature is: Disabled | |
| APM feature is: Unavailable | |
| Rd look-ahead is: Enabled | |
| Write cache is: Enabled | |
| ATA Security is: Disabled, NOT FROZEN [SEC1] | |
| Wt Cache Reorder: Unavailable | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x82) Offline data collection activity | |
| was completed without error. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 430) seconds. | |
| Offline data collection | |
| capabilities: (0x5b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 54) minutes. | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
| 1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0 | |
| 3 Spin_Up_Time PO---- 098 097 070 - 0 | |
| 4 Start_Stop_Count -O--CK 097 097 020 - 3831 | |
| 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 | |
| 7 Seek_Error_Rate POSR-- 087 060 030 - 598516577 | |
| 9 Power_On_Hours -O--CK 070 070 000 - 26794 | |
| 10 Spin_Retry_Count PO--C- 100 100 097 - 0 | |
| 12 Power_Cycle_Count -O--CK 100 100 020 - 714 | |
| 187 Reported_Uncorrect -O--CK 052 052 000 - 48 | |
| 189 High_Fly_Writes -O-RCK 100 100 000 - 0 | |
| 190 Airflow_Temperature_Cel -O---K 071 053 045 - 29 (Min/Max 26/29) | |
| 194 Temperature_Celsius -O---K 029 047 000 - 29 (0 21 0 0 0) | |
| 195 Hardware_ECC_Recovered -O-RC- 077 060 000 - 129867856 | |
| 197 Current_Pending_Sector -O--C- 100 100 000 - 6 | |
| 198 Offline_Uncorrectable ----C- 100 100 000 - 6 | |
| 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 | |
| 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 | |
| 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 | |
| ||||||_ K auto-keep | |
| |||||__ C event count | |
| ||||___ R error rate | |
| |||____ S speed/performance | |
| ||_____ O updated online | |
| |______ P prefailure warning | |
| General Purpose Log Directory Version 1 | |
| SMART Log Directory Version 1 [multi-sector log support] | |
| Address Access R/W Size Description | |
| 0x00 GPL,SL R/O 1 Log Directory | |
| 0x01 GPL,SL R/O 1 Summary SMART error log | |
| 0x02 GPL,SL R/O 5 Comprehensive SMART error log | |
| 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log | |
| 0x06 GPL,SL R/O 1 SMART self-test log | |
| 0x07 GPL,SL R/O 1 Extended self-test log | |
| 0x09 GPL,SL R/W 1 Selective self-test log | |
| 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log | |
| 0x11 GPL,SL R/O 1 SATA Phy Event Counters log | |
| 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] | |
| 0x21 GPL,SL R/O 1 Write stream error log | |
| 0x22 GPL,SL R/O 1 Read stream error log | |
| 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] | |
| 0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
| 0xa0 GPL,SL VS 1 Device vendor specific log | |
| 0xa1 GPL,SL VS 20 Device vendor specific log | |
| 0xa2 GPL,SL VS 101 Device vendor specific log | |
| 0xa8 GPL,SL VS 20 Device vendor specific log | |
| 0xa9 GPL,SL VS 1 Device vendor specific log | |
| 0xe0 GPL,SL R/W 1 SCT Command/Status | |
| 0xe1 GPL,SL R/W 1 SCT Data Transfer | |
| 0xff GPL - 23040 Reserved | |
| SMART Extended Comprehensive Error Log Version: 1 (5 sectors) | |
| Device Error Count: 55 (device log contains only the most recent 20 errors) | |
| CR = Command Register | |
| FEATR = Features Register | |
| COUNT = Count (was: Sector Count) Register | |
| LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 | |
| LH = LBA High (was: Cylinder High) Register ] LBA | |
| LM = LBA Mid (was: Cylinder Low) Register ] Register | |
| LL = LBA Low (was: Sector Number) Register ] | |
| DV = Device (was: Device/Head) Register | |
| DC = Device Control Register | |
| ER = Error register | |
| ST = Status register | |
| Powered_Up_Time is measured from power on, and printed as | |
| DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
| SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
| Error 55 [14] occurred at disk power-on lifetime: 25981 hours (1082 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER -- ST COUNT LBA_48 LH LM LL DV DC | |
| -- -- -- == -- == == == -- -- -- -- -- | |
| 40 -- 51 00 00 00 00 3e 00 08 a5 40 00 Error: UNC at LBA = 0x3e0008a5 = 1040189605 | |
| Commands leading to the command that caused the error were: | |
| CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
| -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.213 READ DMA EXT | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.212 READ DMA EXT | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.212 READ DMA EXT | |
| 25 00 03 00 08 00 00 3e 00 08 93 40 00 00:00:16.211 READ DMA EXT | |
| 25 00 03 00 08 00 00 3e 00 08 8b 40 00 00:00:16.211 READ DMA EXT | |
| Error 54 [13] occurred at disk power-on lifetime: 25981 hours (1082 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER -- ST COUNT LBA_48 LH LM LL DV DC | |
| -- -- -- == -- == == == -- -- -- -- -- | |
| 40 -- 51 00 00 00 00 3e 00 08 a5 40 00 Error: UNC at LBA = 0x3e0008a5 = 1040189605 | |
| Commands leading to the command that caused the error were: | |
| CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
| -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.213 READ DMA EXT | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.212 READ DMA EXT | |
| 25 00 03 00 08 00 00 3e 00 08 93 40 00 00:00:16.212 READ DMA EXT | |
| 25 00 03 00 08 00 00 3e 00 08 8b 40 00 00:00:16.211 READ DMA EXT | |
| 25 00 03 00 10 00 00 3e 00 08 7b 40 00 00:00:16.211 READ DMA EXT | |
| Error 53 [12] occurred at disk power-on lifetime: 25981 hours (1082 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER -- ST COUNT LBA_48 LH LM LL DV DC | |
| -- -- -- == -- == == == -- -- -- -- -- | |
| 40 -- 51 00 00 00 00 3e 00 08 a5 40 00 Error: UNC at LBA = 0x3e0008a5 = 1040189605 | |
| Commands leading to the command that caused the error were: | |
| CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
| -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.213 READ DMA EXT | |
| 25 00 03 00 08 00 00 3e 00 08 93 40 00 00:00:16.212 READ DMA EXT | |
| 25 00 03 00 08 00 00 3e 00 08 8b 40 00 00:00:16.212 READ DMA EXT | |
| 25 00 03 00 10 00 00 3e 00 08 7b 40 00 00:00:16.211 READ DMA EXT | |
| 25 00 03 00 08 00 00 3e 00 08 73 40 00 00:00:16.211 READ DMA EXT | |
| Error 52 [11] occurred at disk power-on lifetime: 25981 hours (1082 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER -- ST COUNT LBA_48 LH LM LL DV DC | |
| -- -- -- == -- == == == -- -- -- -- -- | |
| 40 -- 51 00 00 00 00 3e 00 08 a5 40 00 Error: UNC at LBA = 0x3e0008a5 = 1040189605 | |
| Commands leading to the command that caused the error were: | |
| CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
| -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.213 READ DMA EXT | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.212 READ DMA EXT | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.212 READ DMA EXT | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.211 READ DMA EXT | |
| 25 00 03 00 08 00 00 3e 00 08 93 40 00 00:00:16.211 READ DMA EXT | |
| Error 51 [10] occurred at disk power-on lifetime: 25981 hours (1082 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER -- ST COUNT LBA_48 LH LM LL DV DC | |
| -- -- -- == -- == == == -- -- -- -- -- | |
| 40 -- 51 00 00 00 00 3e 00 08 a5 40 00 Error: UNC at LBA = 0x3e0008a5 = 1040189605 | |
| Commands leading to the command that caused the error were: | |
| CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
| -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.213 READ DMA EXT | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.212 READ DMA EXT | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.212 READ DMA EXT | |
| 25 00 03 00 08 00 00 3e 00 08 93 40 00 00:00:16.211 READ DMA EXT | |
| 25 00 03 00 08 00 00 3e 00 08 8b 40 00 00:00:16.211 READ DMA EXT | |
| Error 50 [9] occurred at disk power-on lifetime: 25981 hours (1082 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER -- ST COUNT LBA_48 LH LM LL DV DC | |
| -- -- -- == -- == == == -- -- -- -- -- | |
| 40 -- 51 00 00 00 00 3e 00 08 a5 40 00 Error: UNC at LBA = 0x3e0008a5 = 1040189605 | |
| Commands leading to the command that caused the error were: | |
| CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
| -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.213 READ DMA EXT | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.212 READ DMA EXT | |
| 25 00 03 00 08 00 00 3e 00 08 93 40 00 00:00:16.212 READ DMA EXT | |
| 25 00 03 00 08 00 00 3e 00 08 8b 40 00 00:00:16.211 READ DMA EXT | |
| 25 00 03 00 10 00 00 3e 00 08 7b 40 00 00:00:16.211 READ DMA EXT | |
| Error 49 [8] occurred at disk power-on lifetime: 25981 hours (1082 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER -- ST COUNT LBA_48 LH LM LL DV DC | |
| -- -- -- == -- == == == -- -- -- -- -- | |
| 40 -- 51 00 00 00 00 3e 00 08 a5 40 00 Error: UNC at LBA = 0x3e0008a5 = 1040189605 | |
| Commands leading to the command that caused the error were: | |
| CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
| -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.213 READ DMA EXT | |
| 25 00 03 00 08 00 00 3e 00 08 93 40 00 00:00:16.212 READ DMA EXT | |
| 25 00 03 00 08 00 00 3e 00 08 8b 40 00 00:00:16.212 READ DMA EXT | |
| 25 00 03 00 10 00 00 3e 00 08 7b 40 00 00:00:16.211 READ DMA EXT | |
| 25 00 03 00 08 00 00 3e 00 08 73 40 00 00:00:16.211 READ DMA EXT | |
| Error 48 [7] occurred at disk power-on lifetime: 25981 hours (1082 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER -- ST COUNT LBA_48 LH LM LL DV DC | |
| -- -- -- == -- == == == -- -- -- -- -- | |
| 40 -- 51 00 00 00 00 3e 00 08 a5 40 00 Error: UNC at LBA = 0x3e0008a5 = 1040189605 | |
| Commands leading to the command that caused the error were: | |
| CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
| -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.213 READ DMA EXT | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.212 READ DMA EXT | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.212 READ DMA EXT | |
| 25 00 03 00 40 00 00 3e 00 08 9b 40 00 00:00:16.211 READ DMA EXT | |
| 25 00 03 00 08 00 00 3e 00 08 93 40 00 00:00:16.211 READ DMA EXT | |
| SMART Extended Self-test Log Version: 1 (1 sectors) | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short offline Completed without error 00% 0 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| SCT Commands not supported | |
| Device Statistics (GP/SMART Log 0x04) not supported | |
| SATA Phy Event Counters (GP Log 0x11) | |
| ID Size Value Description | |
| 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET | |
| 0x0001 2 0 Command failed due to ICRC error | |
| 0x0003 2 0 R_ERR response for device-to-host data FIS | |
| 0x0004 2 0 R_ERR response for host-to-device data FIS | |
| 0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
| 0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment