DNS-320L Buildroot 2023.08-650-gc913d310e5 boot log

gistfile1.txt

 ** MARVELL BOARD: DB-88F6702A-BP LE 

U-Boot 1.1.4 (Aug 22 2012 - 17:06:54) Marvell version: 3.6.0.DNS-320L.01

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CFB00

Soc: 88F6702 A1 CPU running @ 1000Mhz L2 running @ 500Mhz
SysClock = 400Mhz , TClock = 166Mhz 

DRAM (DDR2) CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000   size 256MB 
DRAM Total size 256MB  16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:128 MB
Flash:  0 kB

CPU : Marvell Feroceon (Rev 1)

Streaming disabled 
Write allocate disabled


USB 0: host mode
PEX 0: interface detected no Link.
Net:   egiga0 [PRIME]
Hit any key to stop autoboot:  0 
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 10.1.0.10
Using egiga0 device
TFTP from server 10.1.0.1; our IP address is 10.1.0.10
Filename 'uImage.kirkwood-dns320l'.
Load address: 0xa00000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ###############################
done
Bytes transferred = 5481426 (53a3d2 hex)
Using egiga0 device
TFTP from server 10.1.0.1; our IP address is 10.1.0.10
Filename 'rootfs.cpio.uboot'.
Load address: 0x2000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ##########
done
Bytes transferred = 1710475 (1a198b hex)
## Booting image at 00a00000 ...
   Image Name:   Linux-6.5.5
   Created:      2023-10-02  18:06:40 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    5481362 Bytes =  5.2 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 02000000 ...
   Image Name:   
   Created:      2023-10-02  18:06:42 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    1710411 Bytes =  1.6 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

Booting Linux on physical CPU 0x0
Linux version 6.5.5 (enki@newton) (arm-buildroot-linux-gnueabi-gcc.br_real (Buildroot 2023.08-650-gc913d310e5) 12.3.0, GNU ld (GNU Binutils) 2.40) #1 PREEMPT Mon Oct  2 20:06:28 CEST 2023
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
CPU: VIVT data cache, VIVT instruction cache
OF: fdt: Machine model: D-Link DNS-320L
Memory policy: Data cache writeback
Zone ranges:
  Normal   [mem 0x0000000000000000-0x000000000fffffff]
  HighMem  empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x000000000fffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Kernel command line: console=ttyS0,115200 debug
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
Built 1 zonelists, mobility grouping on.  Total pages: 65024
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
Memory: 245092K/262144K available (8060K kernel code, 1867K rwdata, 1980K rodata, 236K init, 661K bss, 17052K reserved, 0K cma-reserved, 0K highmem)
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
rcu: Preemptible hierarchical RCU implementation.
rcu:    RCU event tracing is enabled.
        Trampoline variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
sched_clock: 32 bits at 167MHz, resolution 6ns, wraps every 12884901885ns
Switching to timer-based delay loop, resolution 6ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666)
CPU: Testing write buffer coherency: ok
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
Setting up static identity map for 0x8200 - 0x8258
mvebu-soc-id: MVEBU SoC ID=0x6702, Rev=0x3
rcu: Hierarchical SRCU implementation.
rcu:    Max phase no-delay instances is 1000.
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 256 KiB pool for atomic coherent allocations
thermal_sys: Registered thermal governor 'step_wise'
cpuidle: using governor menu
Feroceon L2: Enabling L2
Feroceon L2: Cache support initialised.
platform f1010000.pin-controller: Fixed dependency cycle(s) with /ocp@f1000000/pin-controller@10000/pmx-button-power
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
Advanced Linux Sound Architecture Driver Initialized.
vgaarb: loaded
clocksource: Switched to clocksource orion_clocksource
NET: Registered PF_INET protocol family
IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp-with-tls transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 32
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=30 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
mv_xor f1060800.xor: Marvell shared XOR driver
mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
mv_xor f1060900.xor: Marvell shared XOR driver
mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
printk: console [ttyS0] disabled
f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 10416666) is a 16550A
printk: console [ttyS0] enabled
Freeing initrd memory: 1672K
f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 10416666) is a 16550A
loop: module loaded
sata_mv f1080000.sata: version 1.28
sata_mv f1080000.sata: slots 32 ports 2
scsi host0: sata_mv
scsi host1: sata_mv
ata1: SATA max UDMA/133 irq 29
ata2: SATA max UDMA/133 irq 29
nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
nand: Hynix H27U1G8F2BTR-BC
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Scanning device for bad blocks
7 fixed-partitions partitions found on MTD device orion_nand
Creating 7 MTD partitions on "orion_nand":
0x000000000000-0x000000100000 : "u-boot"
0x000000100000-0x000000600000 : "uImage"
0x000000600000-0x000000b00000 : "ramdisk"
0x000000b00000-0x000006f00000 : "image"
0x000006f00000-0x000007900000 : "mini firmware"
0x000007900000-0x000007e00000 : "config"
0x000007e00000-0x000008000000 : "my-dlink"
mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:00:02:02
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
orion-ehci f1050000.ehci: EHCI Host Controller
orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000
orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
ata1: SATA link down (SStatus 0 SControl F300)
ata2: SATA link down (SStatus 0 SControl F300)
rtc-mv f1010300.rtc: internal RTC not ticking
i2c_dev: i2c /dev entries driver
orion_wdt: Initial timeout 25 sec
marvell-cesa f1030000.crypto: CESA device successfully registered
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered PF_PACKET protocol family
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Loading compiled-in X.509 certificates
input: gpio-keys as /devices/platform/gpio-keys/input/input0
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
clk: Disabling unused clocks
ALSA device list:
  No soundcards found.
Freeing unused kernel image (initmem) memory: 236K
Kernel memory protection not selected by kernel config.
Run /init as init process
  with arguments:
    /init
  with environment:
    HOME=/
    TERM=linux
Saving 256 bits of non-creditable seed for next boot
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Starting network: mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, half duplex, flow control disabled
mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
udhcpc: started, v1.36.1
udhcpc: broadcasting discover
mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, half duplex, flow control disabled
udhcpc: no lease, forking to background
OK
Starting dns320l-daemon: OK

Welcome to Buildroot
buildroot login: root
# platform regulators:regulator@1: deferred probe pending
# cat /etc/os-release 
NAME=Buildroot
VERSION=2023.08-650-gc913d310e5
ID=buildroot
VERSION_ID=2023.11-git
PRETTY_NAME="Buildroot 2023.11-git"
# uname -a
Linux buildroot 6.5.5 #1 PREEMPT Mon Oct  2 20:06:28 CEST 2023 armv5tel GNU/Linux
#