-

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE-p11 #3: Tue Jun 19 09:35:50 CEST 2012
    root@bsdclient.bas.roche.com:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_wrap.8.i386 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (699.93-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Family = 6  Model = 8  Stepping = 10
  Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 268435456 (256 MB)
avail memory = 247701504 (236 MB)
ACPI Error: A valid RSDP was not found (20100331/tbxfroot-309)
ACPI: Table initialisation failed: AE_NOT_FOUND
ACPI: Try disabling either ACPI or apic support.
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
cbb0: <TI1420 PCI-CardBus Bridge> at device 9.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: Unable to map IRQ...
device_attach: cbb0 attach returned 12
cbb1: <TI1420 PCI-CardBus Bridge> at device 9.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: Unable to map IRQ...
device_attach: cbb1 attach returned 12
ubsec0 mem 0xc0000000-0xc000ffff irq 11 at device 10.0 on pci0
ubsec0: [ITHREAD]
ubsec0: Broadcom 5802
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf800-0xf80f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 1 on motherboard
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
fxp0: <Intel 82559ER Embedded 10/100 Ethernet> port 0xec00-0xec3f mem 0xc0100000-0xc0100fff,0xc0120000-0xc013ffff irq 6 at device 3.0 on pci2
fxp0: Disabling dynamic standby mode in EEPROM
fxp0: New EEPROM ID: 0xfffd
fxp0: EEPROM checksum @ 0xff: 0xffff -> 0xbbb9
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: [ITHREAD]
fxp1: <Intel 82559ER Embedded 10/100 Ethernet> port 0xe800-0xe83f mem 0xc0140000-0xc0140fff,0xc0160000-0xc017ffff irq 10 at device 4.0 on pci2
fxp1: Disabling dynamic standby mode in EEPROM
fxp1: New EEPROM ID: 0xfffd
fxp1: EEPROM checksum @ 0xff: 0xffff -> 0xbbb9
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> PHY 1 on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: [ITHREAD]
fxp2: <Intel 82559ER Embedded 10/100 Ethernet> port 0xe400-0xe43f mem 0xc0180000-0xc0180fff,0xc01a0000-0xc01bffff irq 11 at device 5.0 on pci2
fxp2: Disabling dynamic standby mode in EEPROM
fxp2: New EEPROM ID: 0xfffd
fxp2: EEPROM checksum @ 0xff: 0xffff -> 0xbbb9
miibus2: <MII bus> on fxp2
inphy2: <i82555 10/100 media interface> PHY 1 on miibus2
inphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2: [ITHREAD]
fxp3: <Intel 82559ER Embedded 10/100 Ethernet> port 0xe000-0xe03f mem 0xc01c0000-0xc01c0fff,0xc01e0000-0xc01fffff irq 12 at device 6.0 on pci2
fxp3: Disabling dynamic standby mode in EEPROM
fxp3: New EEPROM ID: 0xfffd
fxp3: EEPROM checksum @ 0xff: 0xffff -> 0xbbb9
miibus3: <MII bus> on fxp3
inphy3: <i82555 10/100 media interface> PHY 1 on miibus3
inphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp3: [ITHREAD]
cpu0 on motherboard
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: [FILTER]
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
uart1: [FILTER]
RTC BIOS diagnostic error 80<clock_battery>
Timecounter "TSC" frequency 699926038 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
fxp0: link state changed to DOWN
fxp1: link state changed to DOWN
fxp2: link state changed to DOWN
fxp3: link state changed to DOWN
ad0: 38154MB <FUJITSU MHT2040AS 006D> at ata0-master WDMA2 
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
Invalid time in real time clock.
Check and reset the date immediately!
Configuring crash dumps...
Using /dev/ad0s1b for dump device.
Mounting filesystems...
WARNING: R/W mount of / denied.  Filesystem is not clean - run fsck
mount: /dev/ad0s1a : Operation not permitted
** /dev/ad0s1a
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
UNREF FILE I=164867  OWNER=root MODE=100644
SIZE=0 MTIME=Dec  1 17:48 2019 
CLEAR? yes

UNREF FILE I=164868  OWNER=root MODE=100644
SIZE=0 MTIME=Dec  1 17:48 2019 
CLEAR? yes

UNREF FILE I=164869  OWNER=root MODE=100644
SIZE=0 MTIME=Dec  1 17:48 2019 
CLEAR? yes

UNREF FILE I=164870  OWNER=root MODE=100644
SIZE=0 MTIME=Dec  1 17:48 2019 
CLEAR? yes

UNREF FILE I=164871  OWNER=root MODE=100644
SIZE=0 MTIME=Dec  1 17:48 2019 
CLEAR? yes

UNREF FILE I=164886  OWNER=root MODE=100644
SIZE=0 MTIME=Dec  1 17:48 2019 
CLEAR? yes

UNREF FILE I=164887  OWNER=root MODE=100644
SIZE=0 MTIME=Dec  1 17:48 2019 
CLEAR? yes

UNREF FILE I=164888  OWNER=root MODE=100644
SIZE=0 MTIME=Dec  1 17:48 2019 
CLEAR? yes

UNREF FILE I=164889  OWNER=root MODE=100644
SIZE=0 MTIME=Dec  1 17:48 2019 
CLEAR? yes

UNREF FILE I=164890  OWNER=root MODE=100644
SIZE=0 MTIME=Dec  1 17:48 2019 
CLEAR? yes

UNREF FILE I=164892  OWNER=root MODE=100644
SIZE=0 MTIME=Dec  1 17:48 2019 
CLEAR? yes

UNREF FILE I=164893  OWNER=root MODE=100644
SIZE=0 MTIME=Dec  1 17:48 2019 
CLEAR? yes

UNREF FILE I=164894  OWNER=root MODE=100644
SIZE=0 MTIME=Dec  1 17:48 2019 
CLEAR? yes

UNREF FILE I=164895  OWNER=root MODE=100644
SIZE=0 MTIME=Dec  1 17:48 2019 
CLEAR? yes

UNREF FILE I=164896  OWNER=root MODE=100644
SIZE=0 MTIME=Dec  1 17:48 2019 
CLEAR? yes

** Phase 5 - Check Cyl groups
FREE BLK COUNT(S) WRONG IN SUPERBLK
SALVAGE? yes

SUMMARY INFORMATION BAD
SALVAGE? yes

BLK(S) MISSING IN BIT MAPS
SALVAGE? yes

5906 files, 92703 used, 18317107 free (275 frags, 2289604 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****

stray irq7
***** FILE SYSTEM WAS MODIFIED *****

stray irq7
     ___
 ___/ f \
/ p \___/ Sense
\___/   \
    \___/

Welcome to pfSense 2.0.1-RELEASE  ...

No core dumps found.
Creating symlinks......done.
External config loader 1.0 is now starting... ad0s1b
Launching the init system... done.
Initializing......stray irq7
....stray irq7
.............too many stray irq 7's: not logging anymore
..... done.
Starting device manager (devd)...done.
Loading configuration......done.
Updating configuration...done.
Cleaning backup cache................done.
Setting up extended sysctls...done.
Setting timezone...done.
Starting Secure Shell Services...done.
Setting up polling defaults...done.
Setting up interfaces microcode...done.
Configuring LAGG interfaces...done.
Configuring VLAN interfaces...done.
Configuring QinQ interfaces...done.
Configuring WAN interface...Generating new MAC address.done.
Configuring LAN interface...Generating new MAC address.done.
Syncing OpenVPN settings...done.
Starting syslog...done.
Configuring firewall......done.
Starting PFLOG...done.
Setting up gateway monitors...done.
Synchronizing user settings...done.
Starting webConfigurator...done.
Configuring CRON...done.
Starting DHCP service...done.
Starting DNS forwarder...done.
Configuring firewall......done.
Starting OpenNTP time client...done.
Generating RRD graphs...done.
Starting CRON... done.
Bootup complete