Created
June 17, 2011 06:24
-
-
Save eploko/1030958 to your computer and use it in GitHub Desktop.
FUJITSU MJA2500BH FFS G1-K94FT9A28F8U SMART report
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
SMART Vision report | |
FUJITSU MJA2500BH FFS G1-K94FT9A28F8U SMART report | |
---------------------------------------------------------------------------------- | |
| ID π | Parameter name | Attribute | Treshold | Worst | RAW | | |
---------------------------------------------------------------------------------- | |
| 1 | Raw Read Error Rate | 100 | 0 | 100 | 0 | | |
| 2 | Throughput Performance | 100 | 0 | 100 | 0 | | |
| 3 | Spin Up Time | 100 | 25 | 100 | 0 | | |
| 4 | Start/Stop Count | 99 | 0 | 99 | 2126 | | |
| 5 | Reallocated Sectors Count | 100 | 24 | 100 | 0 | | |
| 7 | Seek Error Rate | 100 | 47 | 100 | 0 | | |
| 8 | Seek Time Performance | 100 | 19 | 100 | 0 | | |
| 9 | Power-On Hours Count | 93 | 0 | 93 | 3925 | | |
| 10 | Spin Retry Count | 100 | 20 | 100 | 0 | | |
| 12 | Device Power Cycle Count | 100 | 0 | 100 | 2049 | | |
| 160 | Vendor specific. | 100 | 0 | 100 | 0 | | |
| 192 | Power-Off Retract Count | 100 | 0 | 100 | 48300117 | | |
| 193 | Load/Unload Cycle Count | 98 | 0 | 98 | 55736 | | |
| 194 | Temperature | 100 | 0 | 100 | 1048611 | | |
| 195 | Spin Up Retry Count | 100 | 0 | 100 | 0 | | |
| 196 | Reallocation Events Count | 100 | 0 | 100 | 0 | | |
| 197 | Current Pending Sector Count | 100 | 0 | 100 | 0 | | |
| 198 | Uncorrectable Sector Count | 100 | 0 | 100 | 0 | | |
| 199 | UltraDMA CRC Error Rate | 200 | 0 | 253 | 0 | | |
| 200 | Write Error Rate | 100 | 60 | 100 | 0 | | |
| 203 | Vendor specific. | 100 | 0 | 100 | 0 | | |
| 240 | Head Flying Hours | 200 | 0 | 148 | 0 | | |
| 254 | Vendor specific. | 100 | 0 | 100 | 2857 | | |
---------------------------------------------------------------------------------- | |
FUJITSU MJA2500BH FFS G1-K94FT9A28F8U pasport report | |
---------------------------------------------------------------------------------- | |
Common data about configuration: | |
ATA device | |
Fixed disk and/or controller | |
Model: FUJITSU MJA2500BH FFS G1 | |
Serial number: K94FT9A28F8U | |
Firmware version: 00810021 | |
Additional info: | |
Logical cylinders: 16383 | |
Logical heads: 16 | |
Logical sectors per track: 63 | |
Bytes count available then performing R/W long: 0 | |
Maximal block size for commands R/W multiple: 16 | |
Buffer size: 8 Mb | |
Logical drives info: | |
Disk C:\ | |
Volume name: [None] | |
Filesystem name: NTFS | |
Volume serial number: FA9C8EB5 | |
Total space: 465,66 Gb | |
Free space: 457,94 Gb | |
Total clusters: 122070527 | |
NumFree clusters: 120046527 | |
Sectors per cluster: 8 | |
Bytes per sector: 512 | |
Features: | |
Stop timer values is standart | |
IORDY is supported | |
IORDY can be disabled | |
LBA is supported | |
DMA is supported | |
Current logical parameters: | |
Cylinders: 16383 | |
Heads: 16 | |
Sectors per track: 63 | |
CHS mode capacity available16514064 Sectors (8063 Mb) | |
LBA mode capacity available268435455 Sectors (131071 Mb) | |
LBA48 mode capacity available976773168 Sectors (476940 Mb) | |
Current block size for commands R/W multiple16 | |
Available DMA modes: | |
Multiword DMA Mode : 0 | |
Multiword DMA Mode : 1 | |
Multiword DMA Mode : 2 | |
Active DMA mode: Multiword DMA Mode 2 | |
Available Ultra DMA/33 modes: | |
Ultra DMA/33 Mode : 0 | |
Ultra DMA/33 Mode : 1 | |
Ultra DMA/33 Mode : 2 | |
Ultra DMA/33 Mode : 3 | |
Ultra DMA/33 Mode : 4 | |
Ultra DMA/33 Mode : 5 | |
Supported extended PIO modes: | |
PIO MODE : 3 | |
PIO MODE : 4 | |
Supported PIO mode: 2 | |
Multiword DMA minimal cycle time: 120 ns | |
Multiword DMA recommended cycle time: 120 ns | |
PIO cycle time minimal without thread management: 120 ns | |
PIO cycle time minimal with IORDY: 120 ns | |
Supported standarts ATA: | |
ATA - 3 | |
ATA - 4 | |
ATA - 5 | |
ATA - 6 | |
ATA - 7 | |
ATA - 8 | |
Supports SATA Signaling Speed: | |
SATA-I (1.5Gb/s) | |
Acoustic management: | |
Acoustic management current : 254 | |
Acoustic management vendor : 254 | |
Supported command sets: | |
NCQ | |
Phy Event Counters | |
DMA Setup auto-activation | |
Initiating power management | |
Software Settings Preservation | |
S.M.A.R.T. | |
Security mode | |
Mandatory power management | |
Write cache | |
Look ahead | |
Host protected area | |
Write buffer | |
Read buffer | |
Download microcode | |
Advanced power management | |
Set MAX | |
Automatic acoustic management | |
48-bit addressing | |
Device config overlay | |
Mandatory flush cashe | |
Flush cashe ext | |
SMART error logging | |
SMART self test | |
General purpose logging | |
Write DMA FUA ext | |
Unabled command sets: | |
Device initiated power management | |
Software Settings Preservation | |
S.M.A.R.T. | |
Mandatory power management | |
Write cache | |
Look ahead | |
Write buffer | |
Read buffer | |
Download microcode | |
Advanced power management | |
Automatic acoustic management | |
48-bit addressing | |
Device config overlay | |
Mandatory flush cashe | |
Flush cashe ext | |
SMART error logging | |
SMART self test | |
General purpose logging | |
Write DMA FUA ext | |
Security subsystem is supported: | |
Password set: No | |
Drive locked: No | |
Drive frozen: Yes | |
Incorrect passwords counter overflow: No | |
Supporting security erase: No | |
Security level: High | |
Master code: FFFE | |
---------------------------------------------------------------------------------- | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment