Last active
May 2, 2018 01:51
-
-
Save equalunique/b34cd7d88b98d750074b82540c576d37 to your computer and use it in GitHub Desktop.
Matching mps driver in 11.1-STABLE to LSI 2008 firmware
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Copyright (c) 1992-2017 The FreeBSD Project. | |
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
The Regents of the University of California. All rights reserved. | |
FreeBSD is a registered trademark of The FreeBSD Foundation. | |
FreeBSD 11.1-RELEASE #0 r321309: Fri Jul 21 02:08:28 UTC 2017 | |
root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 | |
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0) | |
VT(vga): resolution 640x480 | |
CPU: AMD Opteron(TM) Processor 6272 (2100.05-MHz K8-class CPU) | |
Origin="AuthenticAMD" Id=0x600f12 Family=0x15 Model=0x1 Stepping=2 | |
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> | |
Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX> | |
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> | |
AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,PCXC,PNXC> | |
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 | |
TSC: P-state invariant, performance statistics | |
real memory = 68719476736 (65536 MB) | |
avail memory = 66596585472 (63511 MB) | |
Event timer "LAPIC" quality 100 | |
ACPI APIC Table: <031816 APIC1103> | |
FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs | |
FreeBSD/SMP: 2 package(s) x 16 core(s) | |
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20170303/tbfadt-748) | |
ioapic0 <Version 2.1> irqs 0-23 on motherboard | |
ioapic1 <Version 2.1> irqs 24-55 on motherboard | |
ioapic2 <Version 2.1> irqs 56-87 on motherboard | |
SMP: AP CPU #1 Launched! | |
SMP: AP CPU #19 Launched! | |
SMP: AP CPU #2 Launched! | |
SMP: AP CPU #18 Launched! | |
SMP: AP CPU #4 Launched! | |
SMP: AP CPU #10 Launched! | |
SMP: AP CPU #29 Launched! | |
SMP: AP CPU #23 Launched! | |
SMP: AP CPU #26 Launched! | |
SMP: AP CPU #11 Launched! | |
SMP: AP CPU #8 Launched! | |
SMP: AP CPU #15 Launched! | |
SMP: AP CPU #7 Launched! | |
SMP: AP CPU #16 Launched! | |
SMP: AP CPU #9 Launched! | |
SMP: AP CPU #13 Launched! | |
SMP: AP CPU #25 Launched! | |
SMP: AP CPU #27 Launched! | |
SMP: AP CPU #5 Launched! | |
SMP: AP CPU #22 Launched! | |
SMP: AP CPU #28 Launched! | |
SMP: AP CPU #30 Launched! | |
SMP: AP CPU #21 Launched! | |
SMP: AP CPU #17 Launched! | |
SMP: AP CPU #24 Launched! | |
SMP: AP CPU #14 Launched! | |
SMP: AP CPU #31 Launched! | |
SMP: AP CPU #3 Launched! | |
SMP: AP CPU #12 Launched! | |
SMP: AP CPU #20 Launched! | |
SMP: AP CPU #6 Launched! | |
Timecounter "TSC" frequency 2100045129 Hz quality 800 | |
random: entropy device external interface | |
md0: Preloaded image </mfsroot> 91209728 bytes at 0xffffffff82167a88 | |
kbd1 at kbdmux0 | |
netmap: loaded module | |
module_register_init: MOD_LOAD (vesa, 0xffffffff80f5b220, 0) error 19 | |
nexus0 | |
vtvga0: <VT VGA driver> on motherboard | |
cryptosoft0: <software crypto> on motherboard | |
acpi0: <SMCI > on motherboard | |
acpi0: Power Button (fixed) | |
cpu0: <ACPI CPU> on acpi0 | |
cpu1: <ACPI CPU> on acpi0 | |
cpu2: <ACPI CPU> on acpi0 | |
cpu3: <ACPI CPU> on acpi0 | |
cpu4: <ACPI CPU> on acpi0 | |
cpu5: <ACPI CPU> on acpi0 | |
cpu6: <ACPI CPU> on acpi0 | |
cpu7: <ACPI CPU> on acpi0 | |
cpu8: <ACPI CPU> on acpi0 | |
cpu9: <ACPI CPU> on acpi0 | |
cpu10: <ACPI CPU> on acpi0 | |
cpu11: <ACPI CPU> on acpi0 | |
cpu12: <ACPI CPU> on acpi0 | |
cpu13: <ACPI CPU> on acpi0 | |
cpu14: <ACPI CPU> on acpi0 | |
cpu15: <ACPI CPU> on acpi0 | |
cpu16: <ACPI CPU> on acpi0 | |
cpu17: <ACPI CPU> on acpi0 | |
cpu18: <ACPI CPU> on acpi0 | |
cpu19: <ACPI CPU> on acpi0 | |
cpu20: <ACPI CPU> on acpi0 | |
cpu21: <ACPI CPU> on acpi0 | |
cpu22: <ACPI CPU> on acpi0 | |
cpu23: <ACPI CPU> on acpi0 | |
cpu24: <ACPI CPU> on acpi0 | |
cpu25: <ACPI CPU> on acpi0 | |
cpu26: <ACPI CPU> on acpi0 | |
cpu27: <ACPI CPU> on acpi0 | |
cpu28: <ACPI CPU> on acpi0 | |
cpu29: <ACPI CPU> on acpi0 | |
cpu30: <ACPI CPU> on acpi0 | |
cpu31: <ACPI CPU> on acpi0 | |
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 | |
Timecounter "i8254" frequency 1193182 Hz quality 0 | |
Event timer "i8254" frequency 1193182 Hz quality 100 | |
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 | |
Event timer "RTC" frequency 32768 Hz quality 0 | |
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 | |
Timecounter "HPET" frequency 14318180 Hz quality 950 | |
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 | |
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 | |
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 | |
pci0: <ACPI PCI bus> on pcib0 | |
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) | |
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 | |
pci1: <ACPI PCI bus> on pcib1 | |
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdfffe000-0xdfffffff irq 44 at device 0.0 on pci1 | |
xhci0: 64 bytes context size, 32-bit DMA | |
xhci0: Unable to map MSI-X table | |
usbus0 on xhci0 | |
usbus0: 5.0Gbps Super Speed USB v3.0 | |
pcib2: <ACPI PCI-PCI bridge> irq 54 at device 11.0 on pci0 | |
pci2: <ACPI PCI bus> on pcib2 | |
ahci0: <Marvell 88SE9230 AHCI SATA controller> port 0xc800-0xc807,0xc400-0xc403,0xd800-0xd807,0xd400-0xd403,0xd000-0xd01f mem 0xdfeef800-0xdfeeffff irq 32 at device 0.0 on pci2 | |
ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported | |
ahci0: quirks=0x900<NOBSYRES,ALTSIG> | |
ahcich0: <AHCI channel> at channel 0 on ahci0 | |
ahcich1: <AHCI channel> at channel 1 on ahci0 | |
ahcich2: <AHCI channel> at channel 2 on ahci0 | |
ahcich3: <AHCI channel> at channel 3 on ahci0 | |
ahcich4: <AHCI channel> at channel 4 on ahci0 | |
ahcich5: <AHCI channel> at channel 5 on ahci0 | |
ahcich6: <AHCI channel> at channel 6 on ahci0 | |
ahcich7: <AHCI channel> at channel 7 on ahci0 | |
pcib3: <ACPI PCI-PCI bridge> irq 54 at device 12.0 on pci0 | |
pci3: <ACPI PCI bus> on pcib3 | |
mps0: <Avago Technologies (LSI) SAS2008> port 0xb000-0xb0ff mem 0xdfd3c000-0xdfd3ffff,0xdfd40000-0xdfd7ffff irq 36 at device 0.0 on pci3 | |
mps0: Firmware: 19.00.00.00, Driver: 21.02.00.00-fbsd | |
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> | |
pcib4: <ACPI PCI-PCI bridge> irq 54 at device 13.0 on pci0 | |
pci4: <ACPI PCI bus> on pcib4 | |
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xa800-0xa81f mem 0xdfce0000-0xdfcfffff,0xdfcc0000-0xdfcdffff,0xdfc9c000-0xdfc9ffff irq 40 at device 0.0 on pci4 | |
igb0: Using MSIX interrupts with 9 vectors | |
igb0: Ethernet address: 00:25:90:74:0e:9c | |
igb0: Bound queue 0 to cpu 0 | |
igb0: Bound queue 1 to cpu 1 | |
igb0: Bound queue 2 to cpu 2 | |
igb0: Bound queue 3 to cpu 3 | |
igb0: Bound queue 4 to cpu 4 | |
igb0: Bound queue 5 to cpu 5 | |
igb0: Bound queue 6 to cpu 6 | |
igb0: Bound queue 7 to cpu 7 | |
igb0: netmap queues/slots: TX 8/1024, RX 8/1024 | |
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xa400-0xa41f mem 0xdfc60000-0xdfc7ffff,0xdfc40000-0xdfc5ffff,0xdfc1c000-0xdfc1ffff irq 41 at device 0.1 on pci4 | |
igb1: Using MSIX interrupts with 9 vectors | |
igb1: Ethernet address: 00:25:90:74:0e:9d | |
igb1: Bound queue 0 to cpu 8 | |
igb1: Bound queue 1 to cpu 9 | |
igb1: Bound queue 2 to cpu 10 | |
igb1: Bound queue 3 to cpu 11 | |
igb1: Bound queue 4 to cpu 12 | |
igb1: Bound queue 5 to cpu 13 | |
igb1: Bound queue 6 to cpu 14 | |
igb1: Bound queue 7 to cpu 15 | |
igb1: netmap queues/slots: TX 8/1024, RX 8/1024 | |
ahci1: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x9000-0x9007,0x8000-0x8003,0x7000-0x7007,0x6000-0x6003,0x5000-0x500f mem 0xdfbf8400-0xdfbf87ff irq 22 at device 17.0 on pci0 | |
ahci1: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported | |
ahci1: quirks=0x22000<ATI_PMP_BUG,1MSI> | |
ahcich8: <AHCI channel> at channel 0 on ahci1 | |
ahcich9: <AHCI channel> at channel 1 on ahci1 | |
ahcich10: <AHCI channel> at channel 2 on ahci1 | |
ahcich11: <AHCI channel> at channel 3 on ahci1 | |
ahcich12: <AHCI channel> at channel 4 on ahci1 | |
ahcich13: <AHCI channel> at channel 5 on ahci1 | |
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbf7000-0xdfbf7fff irq 16 at device 18.0 on pci0 | |
usbus1 on ohci0 | |
usbus1: ohci1: 12Mbps Full Speed USB v1.0 | |
<AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbf6000-0xdfbf6fff irq 16 at device 18.1 on pci0 | |
usbus2 on ohci1 | |
usbus2: 12Mbps Full Speed USB v1.0 | |
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xdfbf8800-0xdfbf88ff irq 17 at device 18.2 on pci0 | |
usbus3: EHCI version 1.0 | |
usbus3 on ehci0 | |
usbus3: ohci2: 480Mbps High Speed USB v2.0 | |
<AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbfa000-0xdfbfafff irq 18 at device 19.0 on pci0 | |
usbus4 on ohci2 | |
usbus4: ohci3: 12Mbps Full Speed USB v1.0 | |
<AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbf9000-0xdfbf9fff irq 18 at device 19.1 on pci0 | |
usbus5 on ohci3 | |
usbus5: 12Mbps Full Speed USB v1.0 | |
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xdfbf8c00-0xdfbf8cff irq 19 at device 19.2 on pci0 | |
usbus6: EHCI version 1.0 | |
usbus6 on ehci1 | |
usbus6: 480Mbps High Speed USB v2.0 | |
isab0: <PCI-ISA bridge> at device 20.3 on pci0 | |
isa0: <ISA bus> on isab0 | |
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0 | |
pci5: <ACPI PCI bus> on pcib5 | |
vgapci0: <VGA-compatible display> mem 0xdc000000-0xdcffffff,0xdeffc000-0xdeffffff,0xdf000000-0xdf7fffff irq 20 at device 4.0 on pci5 | |
vgapci0: Boot video device | |
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbfb000-0xdfbfbfff irq 18 at device 20.5 on pci0 | |
usbus7 on ohci4 | |
usbus7: 12Mbps Full Speed USB v1.0 | |
pcib6: <ACPI Host-PCI bridge> on acpi0 | |
pcib6: _OSC returned error 0x10 | |
pci6: <ACPI PCI bus> on pcib6 | |
pci6: <base peripheral, IOMMU> at device 0.2 (no driver attached) | |
pcib7: <ACPI PCI-PCI bridge> irq 84 at device 4.0 on pci6 | |
pci7: <ACPI PCI bus> on pcib7 | |
pcib8: <PCI-PCI bridge> mem 0xdbefe000-0xdbefffff irq 76 at device 0.0 on pci7 | |
pci8: <PCI bus> on pcib8 | |
ahd0: <Adaptec 39320LPE Ultra320 SCSI adapter> port 0xe400-0xe4ff,0xe800-0xe8ff mem 0xdbf7e000-0xdbf7ffff irq 76 at device 4.0 on pci8 | |
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs | |
acpi_button0: <Power Button> on acpi0 | |
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 | |
uart0: console (9600,n,8,1) | |
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 | |
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 7 on acpi0 | |
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 | |
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 | |
atkbd0: <AT Keyboard> irq 1 on atkbdc0 | |
kbd0 at atkbd0 | |
atkbd0: [GIANT-LOCKED] | |
ppc0: cannot reserve I/O port range | |
hwpstate0: <Cool`n'Quiet 2.0> on cpu0 | |
Timecounters tick every 1.000 msec | |
nvme cam probe device init | |
ugen7.1: <ATI OHCI root HUB> at usbus7 | |
ugen6.1: <ATI EHCI root HUB> at usbus6 | |
ugen1.1: <ATI OHCI root HUB> at usbus1 | |
ugen0.1: <0x1912 XHCI root HUB> at usbus0 | |
ugen3.1: <ATI EHCI root HUB> at usbus3 | |
ugen5.1: <ATI OHCI root HUB> at usbus5 | |
ugen2.1: <ATI OHCI root HUB> at usbus2 | |
ugen4.1: <ATI OHCI root HUB> at usbus4 | |
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 | |
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 | |
uhub2: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 | |
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 | |
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 | |
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 | |
uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 | |
uhub0: 2 ports with 2 removable, self powered | |
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 | |
uhub6: 3 ports with 3 removable, self powered | |
uhub1: 3 ports with 3 removable, self powered | |
uhub5: 3 ports with 3 removable, self powered | |
uhub4: 3 ports with 3 removable, self powered | |
uhub2: 8 ports with 8 removable, self powered | |
ugen7.2: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus7 | |
ukbd0 on uhub0 | |
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus7 | |
kbd2 at ukbd0 | |
uhub3: 6 ports with 6 removable, self powered | |
uhub7: 6 ports with 6 removable, self powered | |
ugen3.2: <vendor 0x13fe product 0x4200> at usbus3 | |
umass0 on uhub3 | |
umass0: <vendor 0x13fe product 0x4200, class 0/0, rev 2.00/1.00, addr 2> on usbus3 | |
umass0: SCSI over Bulk-Only; quirks = 0xc100 | |
umass0:16:0: Attached to scbus16 | |
ugen1.2: <Unicomp Endura Pro Keyboard> at usbus1 | |
ukbd1 on uhub4 | |
ukbd1: <HID Keyboard> on usbus1 | |
kbd3 at ukbd1 | |
da0 at mps0 bus 0 scbus8 target 15 lun 0 | |
da1 at umass-sim0 bus 0 scbus16 target 0 lun 0 | |
da0: da1: <IBM-ESXS ST1000NM0001 BC48> Fixed Direct Access SPC-4 SCSI device | |
da0: Serial Number Z1N2CNNM0000C2508C0E | |
< PMAP> Removable Direct Access SPC-4 SCSI device | |
da1: Serial Number 90008394585C7B00 | |
da0: 600.000MB/s transfersda1: 40.000MB/s transfers | |
da0: Command Queueing enabled | |
da0: 953869MB (1953525168 512 byte sectors) | |
da1: 3702MB (7581696 512 byte sectors) | |
da1: quirks=0x2<NO_6_BYTE> | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
ses0 at mps0 bus 0 scbus8 target 8 lun 0 | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
ses0: (da0:mps0:0:15:0): CAM status: SCSI Status Error | |
<LSI SAS2X28 0e0b> Fixed Enclosure Services SPC-3 SCSI device | |
ses0: Serial Number | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
ses0: 600.000MB/s transfers(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:ses0: Command Queueing enabled | |
ses0: SCSI-3 ENC Device | |
mps0:0:15:0): Error 22, Unretryable error | |
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d ae 00 00 01 00 | |
ada0: (da0:mps0:0:15:0): CAM status: SCSI Status Error | |
<KINGSTON SMS200S330G 524ABBF0> ATA8-ACS SATA 3.x device | |
ada0: Serial Number 50026B724504E565 | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
ada0: 600.000MB/s transfers(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
((da0:SATA 3.x, UDMA6, PIO 8192bytes)mps0:0:15:0): Error 22, Unretryable error | |
ada0: Command Queueing enabled | |
ada0: 28626MB (58626288 512 byte sectors) | |
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0 | |
ada1: <KINGSTON SMS200S330G 524ABBF0> ATA8-ACS SATA 3.x device | |
ada1: Serial Number 50026B7246033F83 | |
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) | |
ada1: Command Queueing enabled | |
ada1: 28626MB (58626288 512 byte sectors) | |
ada2 at ahcich13 bus 0 scbus14 target 0 lun 0 | |
ada2: <ADATA SP550 O0803B5a> ACS-2 ATA SATA 3.x device | |
ada2: Serial Number 2G0820002444 | |
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes) | |
ada2: Command Queueing enabled | |
ada2: 114473MB (234441648 512 byte sectors) | |
pass2 at ahcich7 bus 0 scbus7 target 0 lun 0 | |
pass2: <Marvell Console 1.01> Removable Processor SCSI device | |
pass2: Serial Number HKDP221516WL | |
pass2: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes) | |
ses0: da0,pass4: Element descriptor: 'Slot 03' | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d 71 00 00 04 00 | |
ses0: da0,pass4: SAS Device Slot Element: 1 Phys at Slot 2 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
ses0: phy 0: SAS device type 1 id 0 | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
ses0: phy 0: protocols: Initiator( None ) Target( SSP ) | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
ses0: phy 0: parent 500304800029d4bf addr 5000c500423fdb55 | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d ae 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
random: unblocking device. | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
Trying to mount root from ufs:/dev/md0 []... | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
GEOM: da0: the secondary GPT table is corrupt or invalid. | |
GEOM: da0: using the primary only -- recovery suggested. | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 c1 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 c1 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 01 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 80 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 10 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 2a 00 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 80 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 10 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 2a 00 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 40 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 02 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 10 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 80 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d ae 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d 71 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d ae 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
GEOM: diskid/DISK-Z1N2CNNM0000C2508C0E: the secondary GPT table is corrupt or invalid. | |
GEOM: diskid/DISK-Z1N2CNNM0000C2508C0E: using the primary only -- recovery suggested. | |
GEOM: da1: the secondary GPT header is not in the last LBA. | |
GEOM: ada2: the secondary GPT header is not in the last LBA. | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 c1 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 c1 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 c1 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 01 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 c1 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 c1 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 01 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 80 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 10 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 2a 00 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 80 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 10 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 2a 00 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 40 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 02 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 10 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 80 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
GEOM: diskid/DISK-90008394585C7B00: the secondary GPT header is not in the last LBA. | |
GEOM: diskid/DISK-2G0820002444: the secondary GPT header is not in the last LBA. | |
igb1: link state changed to UP |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Copyright (c) 1992-2017 The FreeBSD Project. | |
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
The Regents of the University of California. All rights reserved. | |
FreeBSD is a registered trademark of The FreeBSD Foundation. | |
FreeBSD 11.1-RELEASE #0 r321309: Fri Jul 21 02:08:28 UTC 2017 | |
root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 | |
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0) | |
VT(vga): resolution 640x480 | |
CPU: AMD Opteron(TM) Processor 6272 (2100.04-MHz K8-class CPU) | |
Origin="AuthenticAMD" Id=0x600f12 Family=0x15 Model=0x1 Stepping=2 | |
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> | |
Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX> | |
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> | |
AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,PCXC,PNXC> | |
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 | |
TSC: P-state invariant, performance statistics | |
real memory = 68719476736 (65536 MB) | |
avail memory = 66687791104 (63598 MB) | |
Event timer "LAPIC" quality 100 | |
ACPI APIC Table: <031816 APIC1103> | |
FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs | |
FreeBSD/SMP: 2 package(s) x 16 core(s) | |
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20170303/tbfadt-748) | |
ioapic0 <Version 2.1> irqs 0-23 on motherboard | |
ioapic1 <Version 2.1> irqs 24-55 on motherboard | |
ioapic2 <Version 2.1> irqs 56-87 on motherboard | |
SMP: AP CPU #1 Launched! | |
SMP: AP CPU #15 Launched! | |
SMP: AP CPU #17 Launched! | |
SMP: AP CPU #4 Launched! | |
SMP: AP CPU #24 Launched! | |
SMP: AP CPU #7 Launched! | |
SMP: AP CPU #2 Launched! | |
SMP: AP CPU #30 Launched! | |
SMP: AP CPU #31 Launched! | |
SMP: AP CPU #25 Launched! | |
SMP: AP CPU #10 Launched! | |
SMP: AP CPU #14 Launched! | |
SMP: AP CPU #5 Launched! | |
SMP: AP CPU #16 Launched! | |
SMP: AP CPU #6 Launched! | |
SMP: AP CPU #20 Launched! | |
SMP: AP CPU #23 Launched! | |
SMP: AP CPU #22 Launched! | |
SMP: AP CPU #29 Launched! | |
SMP: AP CPU #13 Launched! | |
SMP: AP CPU #28 Launched! | |
SMP: AP CPU #26 Launched! | |
SMP: AP CPU #12 Launched! | |
SMP: AP CPU #11 Launched! | |
SMP: AP CPU #18 Launched! | |
SMP: AP CPU #21 Launched! | |
SMP: AP CPU #27 Launched! | |
SMP: AP CPU #3 Launched! | |
SMP: AP CPU #9 Launched! | |
SMP: AP CPU #19 Launched! | |
SMP: AP CPU #8 Launched! | |
Timecounter "TSC" frequency 2100040504 Hz quality 800 | |
random: entropy device external interface | |
kbd1 at kbdmux0 | |
netmap: loaded module | |
module_register_init: MOD_LOAD (vesa, 0xffffffff80f5b220, 0) error 19 | |
nexus0 | |
vtvga0: <VT VGA driver> on motherboard | |
cryptosoft0: <software crypto> on motherboard | |
acpi0: <SMCI > on motherboard | |
acpi0: Power Button (fixed) | |
cpu0: <ACPI CPU> on acpi0 | |
cpu1: <ACPI CPU> on acpi0 | |
cpu2: <ACPI CPU> on acpi0 | |
cpu3: <ACPI CPU> on acpi0 | |
cpu4: <ACPI CPU> on acpi0 | |
cpu5: <ACPI CPU> on acpi0 | |
cpu6: <ACPI CPU> on acpi0 | |
cpu7: <ACPI CPU> on acpi0 | |
cpu8: <ACPI CPU> on acpi0 | |
cpu9: <ACPI CPU> on acpi0 | |
cpu10: <ACPI CPU> on acpi0 | |
cpu11: <ACPI CPU> on acpi0 | |
cpu12: <ACPI CPU> on acpi0 | |
cpu13: <ACPI CPU> on acpi0 | |
cpu14: <ACPI CPU> on acpi0 | |
cpu15: <ACPI CPU> on acpi0 | |
cpu16: <ACPI CPU> on acpi0 | |
cpu17: <ACPI CPU> on acpi0 | |
cpu18: <ACPI CPU> on acpi0 | |
cpu19: <ACPI CPU> on acpi0 | |
cpu20: <ACPI CPU> on acpi0 | |
cpu21: <ACPI CPU> on acpi0 | |
cpu22: <ACPI CPU> on acpi0 | |
cpu23: <ACPI CPU> on acpi0 | |
cpu24: <ACPI CPU> on acpi0 | |
cpu25: <ACPI CPU> on acpi0 | |
cpu26: <ACPI CPU> on acpi0 | |
cpu27: <ACPI CPU> on acpi0 | |
cpu28: <ACPI CPU> on acpi0 | |
cpu29: <ACPI CPU> on acpi0 | |
cpu30: <ACPI CPU> on acpi0 | |
cpu31: <ACPI CPU> on acpi0 | |
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 | |
Timecounter "i8254" frequency 1193182 Hz quality 0 | |
Event timer "i8254" frequency 1193182 Hz quality 100 | |
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 | |
Event timer "RTC" frequency 32768 Hz quality 0 | |
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 | |
Timecounter "HPET" frequency 14318180 Hz quality 950 | |
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 | |
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 | |
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 | |
pci0: <ACPI PCI bus> on pcib0 | |
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) | |
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 | |
pci1: <ACPI PCI bus> on pcib1 | |
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdfffe000-0xdfffffff irq 44 at device 0.0 on pci1 | |
xhci0: 64 bytes context size, 32-bit DMA | |
xhci0: Unable to map MSI-X table | |
usbus0 on xhci0 | |
usbus0: 5.0Gbps Super Speed USB v3.0 | |
pcib2: <ACPI PCI-PCI bridge> irq 54 at device 11.0 on pci0 | |
pci2: <ACPI PCI bus> on pcib2 | |
ahci0: <Marvell 88SE9230 AHCI SATA controller> port 0xc800-0xc807,0xc400-0xc403,0xd800-0xd807,0xd400-0xd403,0xd000-0xd01f mem 0xdfeef800-0xdfeeffff irq 32 at device 0.0 on pci2 | |
ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported | |
ahci0: quirks=0x900<NOBSYRES,ALTSIG> | |
ahcich0: <AHCI channel> at channel 0 on ahci0 | |
ahcich1: <AHCI channel> at channel 1 on ahci0 | |
ahcich2: <AHCI channel> at channel 2 on ahci0 | |
ahcich3: <AHCI channel> at channel 3 on ahci0 | |
ahcich4: <AHCI channel> at channel 4 on ahci0 | |
ahcich5: <AHCI channel> at channel 5 on ahci0 | |
ahcich6: <AHCI channel> at channel 6 on ahci0 | |
ahcich7: <AHCI channel> at channel 7 on ahci0 | |
pcib3: <ACPI PCI-PCI bridge> irq 54 at device 12.0 on pci0 | |
pci3: <ACPI PCI bus> on pcib3 | |
mps0: <Avago Technologies (LSI) SAS2008> port 0xb000-0xb0ff mem 0xdfd3c000-0xdfd3ffff,0xdfd40000-0xdfd7ffff irq 36 at device 0.0 on pci3 | |
mps0: Firmware: 20.00.07.00, Driver: 21.02.00.00-fbsd | |
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> | |
pcib4: <ACPI PCI-PCI bridge> irq 54 at device 13.0 on pci0 | |
pci4: <ACPI PCI bus> on pcib4 | |
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xa800-0xa81f mem 0xdfce0000-0xdfcfffff,0xdfcc0000-0xdfcdffff,0xdfc9c000-0xdfc9ffff irq 40 at device 0.0 on pci4 | |
igb0: Using MSIX interrupts with 9 vectors | |
igb0: Ethernet address: 00:25:90:74:0e:9c | |
igb0: Bound queue 0 to cpu 0 | |
igb0: Bound queue 1 to cpu 1 | |
igb0: Bound queue 2 to cpu 2 | |
igb0: Bound queue 3 to cpu 3 | |
igb0: Bound queue 4 to cpu 4 | |
igb0: Bound queue 5 to cpu 5 | |
igb0: Bound queue 6 to cpu 6 | |
igb0: Bound queue 7 to cpu 7 | |
igb0: netmap queues/slots: TX 8/1024, RX 8/1024 | |
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xa400-0xa41f mem 0xdfc60000-0xdfc7ffff,0xdfc40000-0xdfc5ffff,0xdfc1c000-0xdfc1ffff irq 41 at device 0.1 on pci4 | |
igb1: Using MSIX interrupts with 9 vectors | |
igb1: Ethernet address: 00:25:90:74:0e:9d | |
igb1: Bound queue 0 to cpu 8 | |
igb1: Bound queue 1 to cpu 9 | |
igb1: Bound queue 2 to cpu 10 | |
igb1: Bound queue 3 to cpu 11 | |
igb1: Bound queue 4 to cpu 12 | |
igb1: Bound queue 5 to cpu 13 | |
igb1: Bound queue 6 to cpu 14 | |
igb1: Bound queue 7 to cpu 15 | |
igb1: netmap queues/slots: TX 8/1024, RX 8/1024 | |
ahci1: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x9000-0x9007,0x8000-0x8003,0x7000-0x7007,0x6000-0x6003,0x5000-0x500f mem 0xdfbf8400-0xdfbf87ff irq 22 at device 17.0 on pci0 | |
ahci1: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported | |
ahci1: quirks=0x22000<ATI_PMP_BUG,1MSI> | |
ahcich8: <AHCI channel> at channel 0 on ahci1 | |
ahcich9: <AHCI channel> at channel 1 on ahci1 | |
ahcich10: <AHCI channel> at channel 2 on ahci1 | |
ahcich11: <AHCI channel> at channel 3 on ahci1 | |
ahcich12: <AHCI channel> at channel 4 on ahci1 | |
ahcich13: <AHCI channel> at channel 5 on ahci1 | |
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbf7000-0xdfbf7fff irq 16 at device 18.0 on pci0 | |
usbus1 on ohci0 | |
usbus1: 12Mbps Full Speed USB v1.0 | |
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbf6000-0xdfbf6fff irq 16 at device 18.1 on pci0 | |
usbus2 on ohci1 | |
usbus2: 12Mbps Full Speed USB v1.0 | |
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xdfbf8800-0xdfbf88ff irq 17 at device 18.2 on pci0 | |
usbus3: EHCI version 1.0 | |
usbus3 on ehci0 | |
usbus3: 480Mbps High Speed USB v2.0 | |
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbfa000-0xdfbfafff irq 18 at device 19.0 on pci0 | |
usbus4 on ohci2 | |
usbus4: 12Mbps Full Speed USB v1.0 | |
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbf9000-0xdfbf9fff irq 18 at device 19.1 on pci0 | |
usbus5 on ohci3 | |
usbus5: 12Mbps Full Speed USB v1.0 | |
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xdfbf8c00-0xdfbf8cff irq 19 at device 19.2 on pci0 | |
usbus6: EHCI version 1.0 | |
usbus6 on ehci1 | |
usbus6: 480Mbps High Speed USB v2.0 | |
isab0: <PCI-ISA bridge> at device 20.3 on pci0 | |
isa0: <ISA bus> on isab0 | |
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0 | |
pci5: <ACPI PCI bus> on pcib5 | |
vgapci0: <VGA-compatible display> mem 0xdc000000-0xdcffffff,0xdeffc000-0xdeffffff,0xdf000000-0xdf7fffff irq 20 at device 4.0 on pci5 | |
vgapci0: Boot video device | |
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbfb000-0xdfbfbfff irq 18 at device 20.5 on pci0 | |
usbus7 on ohci4 | |
usbus7: 12Mbps Full Speed USB v1.0 | |
pcib6: <ACPI Host-PCI bridge> on acpi0 | |
pcib6: _OSC returned error 0x10 | |
pci6: <ACPI PCI bus> on pcib6 | |
pci6: <base peripheral, IOMMU> at device 0.2 (no driver attached) | |
pcib7: <ACPI PCI-PCI bridge> irq 84 at device 4.0 on pci6 | |
pci7: <ACPI PCI bus> on pcib7 | |
pcib8: <PCI-PCI bridge> mem 0xdbefe000-0xdbefffff irq 76 at device 0.0 on pci7 | |
pci8: <PCI bus> on pcib8 | |
ahd0: <Adaptec 39320LPE Ultra320 SCSI adapter> port 0xe400-0xe4ff,0xe800-0xe8ff mem 0xdbf7e000-0xdbf7ffff irq 76 at device 4.0 on pci8 | |
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs | |
acpi_button0: <Power Button> on acpi0 | |
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 | |
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 | |
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 7 on acpi0 | |
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 | |
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 | |
atkbd0: <AT Keyboard> irq 1 on atkbdc0 | |
kbd0 at atkbd0 | |
atkbd0: [GIANT-LOCKED] | |
ppc0: cannot reserve I/O port range | |
hwpstate0: <Cool`n'Quiet 2.0> on cpu0 | |
Timecounters tick every 1.000 msec | |
nvme cam probe device init | |
ugen6.1: <ATI EHCI root HUB> at usbus6 | |
ugen1.1: <ATI OHCI root HUB> at usbus1 | |
ugen3.1: <ATI EHCI root HUB> at usbus3 | |
ugen0.1: <0x1912 XHCI root HUB> at usbus0 | |
ugen7.1: <ATI OHCI root HUB> at usbus7 | |
ugen5.1: <ATI OHCI root HUB> at usbus5 | |
ugen2.1: <ATI OHCI root HUB> at usbus2 | |
ugen4.1: <ATI OHCI root HUB> at usbus4 | |
uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 | |
uhub1: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 | |
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 | |
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 | |
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 | |
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 | |
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 | |
uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 | |
uhub3: 3 ports with 3 removable, self powered | |
uhub5: 2 ports with 2 removable, self powered | |
uhub6: 3 ports with 3 removable, self powered | |
uhub2: 3 ports with 3 removable, self powered | |
uhub7: 3 ports with 3 removable, self powered | |
uhub1: 8 ports with 8 removable, self powered | |
ugen7.2: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus7 | |
ukbd0 on uhub5 | |
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus7 | |
kbd2 at ukbd0 | |
uhub0: 6 ports with 6 removable, self powered | |
uhub4: 6 ports with 6 removable, self powered | |
ugen1.2: <Unicomp Endura Pro Keyboard> at usbus1 | |
ukbd1 on uhub3 | |
ukbd1: <HID Keyboard> on usbus1 | |
kbd3 at ukbd1 | |
da0 at mps0 bus 0 scbus8 target 15 lun 0 | |
ses0 at mps0 bus 0 scbus8 target 8 lun 0 | |
da0: <IBM-ESXS ST1000NM0001 BC48> Fixed Direct Access SPC-4 SCSI device | |
da0: Serial Number Z1N2CNNM0000C2508C0E | |
ses0: <LSI SAS2X28 0e0b> Fixed Enclosure Services SPC-3 SCSI device | |
ses0: Serial Number | |
da0: 600.000MB/s transfers | |
da0: Command Queueing enabled | |
ses0: 600.000MB/s transfersda0: 953869MB (1953525168 512 byte sectors) | |
ses0: Command Queueing enabled | |
ses0: SCSI-3 ENC Device | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
ada0: (da0:mps0:0:15:0): CAM status: SCSI Status Error | |
<KINGSTON SMS200S330G 524ABBF0> ATA8-ACS SATA 3.x device | |
ada0: Serial Number 50026B724504E565 | |
ada0: 600.000MB/s transfers(da0:mps0:0:15:0): SCSI status: Check Condition | |
(SATA 3.x, UDMA6, PIO 8192bytes) | |
ada0: Command Queueing enabled | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:ada0: 28626MB (58626288 512 byte sectors) | |
mps0:0:15:0): Error 22, Unretryable error | |
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0 | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d ae 00 00 01 00 | |
ada1: (da0:mps0:0:15:0): CAM status: SCSI Status Error | |
<KINGSTON SMS200S330G 524ABBF0> ATA8-ACS SATA 3.x device | |
ada1: Serial Number 50026B7246033F83 | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
ada1: 600.000MB/s transfers(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0: (SATA 3.x, UDMA6, PIO 8192bytes) | |
ada1: Command Queueing enabled | |
mps0:0:15:0): Error 22, Unretryable error | |
ada1: 28626MB (58626288 512 byte sectors) | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d 71 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
ada2 at ahcich13 bus 0 scbus14 target 0 lun 0 | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d ae 00 00 01 00 | |
ada2: (da0:mps0:0:15:0): CAM status: SCSI Status Error | |
<ADATA SP550 O0803B5a> ACS-2 ATA SATA 3.x device | |
ada2: Serial Number 2G0820002444 | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes) | |
ada2: Command Queueing enabled | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
ada2: 114473MB (234441648 512 byte sectors) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
pass2 at ahcich7 bus 0 scbus7 target 0 lun 0 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
pass2: <Marvell Console 1.01> Removable Processor SCSI device | |
pass2: Serial Number HKDP221516WL | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
pass2: 150.000MB/s transfers(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0: (SATA 1.x, UDMA4, mps0:0:15:0): Error 22, Unretryable error | |
ATAPI 12bytes, PIO 8192bytes) | |
ses0: da0,pass4: Element descriptor: 'Slot 03' | |
ses0: da0,pass4: SAS Device Slot Element: 1 Phys at Slot 2 | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
ses0: phy 0: SAS device type 1 id 0 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
ses0: phy 0: protocols: Initiator( None ) Target( SSP ) | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
ses0: phy 0: parent 500304800029d4bf addr 5000c500423fdb55 | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
GEOM: da0: the secondary GPT table is corrupt or invalid. | |
GEOM: da0: using the primary only -- recovery suggested. | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
random: unblocking device. | |
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]... | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 c1 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 c1 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 01 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 80 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 10 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 2a 00 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 80 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 10 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 2a 00 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 40 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 02 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 10 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 80 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d ae 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d 71 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d ae 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
GEOM: diskid/DISK-Z1N2CNNM0000C2508C0E: the secondary GPT table is corrupt or invalid. | |
GEOM: diskid/DISK-Z1N2CNNM0000C2508C0E: using the primary only -- recovery suggested. | |
GEOM: ada2: the secondary GPT header is not in the last LBA. | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 c1 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 c1 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 c1 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 01 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 c1 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 27 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 c1 00 00 04 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 fe 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 01 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 67 ff 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 80 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 10 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 2a 00 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 80 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 10 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 2a 00 00 00 10 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 40 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 02 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 10 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 80 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
(da0:mps0:0:15:0): READ(10). CDB: 28 00 74 70 28 00 00 00 01 00 | |
(da0:mps0:0:15:0): CAM status: SCSI Status Error | |
(da0:mps0:0:15:0): SCSI status: Check Condition | |
(da0:mps0:0:15:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) | |
(da0:mps0:0:15:0): Error 22, Unretryable error | |
GEOM: diskid/DISK-2G0820002444: the secondary GPT header is not in the last LBA. | |
GEOM: diskid/DISK-2G0820002444: the secondary GPT header is not in the last LBA. | |
igb1: link state changed to UP | |
ums0 on uhub5 | |
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus7 | |
ums0: 3 buttons and [Z] coordinates ID=0 | |
ums1 on uhub3 | |
ums1: <HID Mouse> on usbus1 | |
ums1: 3 buttons and [XYZ] coordinates ID=1 | |
igb1: link state changed to DOWN | |
igb1: link state changed to UP |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment