Old Console Streaming

Retro_Console_Streaming.md

Stream Original Xbox

REQUIRED HARDWARE:

• OGX360
• Titan Two or GIMX Cable
• HDMI adapter or XboxHD+
• 0 Latency HDMI Input Hardware (Elgato, AverMedia, Razer)

INSTRUCTIONS:

1. Plug the OGX360 into your Xbox controller slot, plug in a USB cable from your game console into the Titan Two's Output port. The Program port's USB cable should plug into your PC.
2. Plug in your Xbox video to the HDMI input hardware.
3. Install GTuner software.
4. Start streaming in to your PC via Steam, Parsec, etc.
5. Launch your HDMI input's viewing software to view the OG Xbox video.
6. [TITAN TWO] open GTuner.exe software. On the right panel, select OUTPUT PROTOCOL: USB Xbox 360. Select Tools > KMG Capture..., check the Gamepad/Joystick checkbox and click the START CAPTURE MODE button. If the Xbox doesn't respond, try unplugging and re-plulgging in the Titan Two from the OGX360.
7. [GIMX CABLE] Open GIMX-Launcher.exe software , select OUTPUT: GIMX adapter, PORT: USB, INPUT: Physical devices, CONFIG: X360Pad.xml

Stream PlayStation 1, 2 & 3

REQUIRED HARDWARE:

• Backwards Compatible PS3 Console
• Titan Two
• 0 Latency HDMI Input Hardware (Elgato, AverMedia, Razer)

INSTRUCTIONS:

1. Plug in a USB cable from your game console into the Titan Two's Output port. The Program port's USB cable should plug into your PC.
2. Plug in your PS3 video to the HDMI input hardware.
3. Install GTuner software.
4. Start streaming in to your PC via Steam, Parsec, etc.
5. Launch your HDMI input's viewing software to view the PS3 video.
6. Open GTuner.exe software. On the right panel, select OUTPUT PROTOCOL: USB PlayStation 3 or USB Automatic. Select Tools > KMG Capture..., check the Gamepad/Joystick checkbox and click the START CAPTURE MODE button.

Stream GameCube

REQUIRED HARDWARE:

• Hacked Wii or Wii U
• (If Using Wii) Wii2HDMI Adapter
• Titan Two
• 0 Latency HDMI Input Hardware (Elgato, AverMedia, Razer)

INSTRUCTIONS:

1. Setup the WiiFlow Lite app to use Nintendont, install the WiiFlow Forwarder Channel, and to launch automatically when the game console powers on:
2. [For Wii]: Install Priiloader.
3. [For Wii U]: Install haxchi and hbl2hbc. Edit hbl2hbc.txt to DWFA=WiiFlow USB Loader.
4. Plug in a USB cable from your game console into the Titan Two's Output port. The Program port's USB cable should plug into your PC.
5. Plug in your Wii/WiiU video to the HDMI input hardware.
6. Install GTuner software.
7. Start streaming in to your PC via Steam, Parsec, etc.
8. Launch your HDMI input's viewing software to view the game console's video.
9. Open GTuner.exe software. On the right panel, select OUTPUT PROTOCOL: USB PlayStation 3. Select Tools > KMG Capture..., check the Gamepad/Joystick checkbox and click the START CAPTURE MODE button.