Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
SwitchResX Configuration

#SwitchResX Settings for LG 21:9 UltraWide

SwitchResX is a utility that allows users to override the default resolution settings in OSX. For more information, including download links, vist http://www.madrau.com/ .

##Disabling System Integrity Protection (SIP)

If you are running OSX 10.11 or higher, SIP must be disabled. To disable SIP do the following:

  • Boot into the recovery partition by pressing CMD + R when starting up your Mac.
  • Once in recovery mode, open a terminal window.
  • Type the command csrutil disable
  • Reboot

##Adding Custom Settings

  • After launching SwitchResX, select the external monitor from the list on the left.
  • Select the 'Custom Resolutions' tab.
  • Add a new custom resolution be clicking the + symbol at the bottom of the window.
  • Adjust the settings to match the appropriate PNG provided in this gist.
  • Press 'Ok'
  • Close SwitchResX and save when prompted.
  • Restart your Mac.

After following these steps, you should be able to adjust the resolution of your external monitor through the 'Display' window in System Preferences.

@RemiWoler

This comment has been minimized.

Copy link

RemiWoler commented Jul 29, 2016

Thank you for the settings and the effort you put into finding them. Works like a charm!

@ntbrock

This comment has been minimized.

Copy link

ntbrock commented Aug 16, 2016

Thank you erichrobinson! Works for me at 2560x1080 with above configuration.

Hardware: LG 34UM58-P 34IN, MacBook Air 13-Inch Mid 2013, Thunderbolt 4K X 2K HDMI Adapter.
Software: SwitchResX version 4.5.6, OSX Yosemite 10.10.5

Amazon link to Monitor with my referral code if this was helpful!

LG 34UM58-P 34IN FHD IPS LED Gaming Monitor 2560 X 1080 Black

@debdude

This comment has been minimized.

Copy link

debdude commented Sep 21, 2016

I managed to connect my ultra-wide LG 25UM58 to my old macbook pro with intel graphics via belkin mini-dp_>hdmi converter and a generic hdmi cable. After applying this patch: https://github.com/Floris497/mac-pixel-clock-patch-V2, full 2560x1080 resolution became available in SwitchResX automatically. I'm enclosing the timings for reference, but you probably don't need them with the patch
screen shot 2016-09-21 at 22 34 59

@woooh77

This comment has been minimized.

Copy link

woooh77 commented Oct 28, 2016

Does not work :(

@mbigras

This comment has been minimized.

Copy link

mbigras commented Nov 4, 2016

thank you so much 😄 🎉

@arcadigital1

This comment has been minimized.

Copy link

arcadigital1 commented Nov 6, 2016

Hi, i have a Macbook pro 2011 AMD Radeon HD 6750M 512 MB, you recommend applying this patch: https://github.com/Floris497/mac-pixel-clock-patch-V2 ?

@doc-wellsy

This comment has been minimized.

Copy link

doc-wellsy commented Dec 27, 2016

Thanks ericrobinson! This works perfectly on MacBook Air i7 running Sierra 10.12.2. You've made my day!

@aldwin

This comment has been minimized.

Copy link

aldwin commented Feb 22, 2017

thank you so much for this, was able to configure my mac mini to the lg 21:9 even though i only have mini dp to dvi and dvi cable.

is there any drawback to using this solution as opposed to buying a mini dp to dp cable for my setup?

@Kamerdiner

This comment has been minimized.

Copy link

Kamerdiner commented Apr 10, 2017

image

These settings worked for me on LG Widescreen and Mac Air Early 2014 (Sierra) .

@cyberspread

This comment has been minimized.

Copy link

cyberspread commented Apr 16, 2017

Hi. I have a LG29UM58-P and a Late 2012 Mac Mini. The monitor only has 2 HDMI ports and an audio port.

I am unable to get the 2560x1080 resolution going straight to the HDMI port on the mini but I thought that I could drive that thru the Mini display/Thunderbolt port. So I got one of these... https://us.macally.com/products/mdhdmi4k

I have hooked it up to my 2015 MacBook Pro Retina and it gets the 2560x1080 resolution and looks awesome, but want this as my main screen for my mini.

Am I missing something? Can this be done with my setup?

Thanks.

@cyberspread

This comment has been minimized.

Copy link

cyberspread commented Apr 16, 2017

After following these instruction I got it working. I tried different instructions a couple days ago which ended with an "Out of Range" error and a days worth of work trying different ways to fix it.

Didn't need the MacAlly adapter. Going to take that back and pay the $16 for SwitchResX.

@RicardoWEBSiTE

This comment has been minimized.

Copy link

RicardoWEBSiTE commented May 2, 2017

Tks, This works perfectly.

@Flodu31

This comment has been minimized.

Copy link

Flodu31 commented May 8, 2017

Thanks for the help :)

@gbergamo

This comment has been minimized.

Copy link

gbergamo commented May 10, 2017

Thanks man!

@haxpor

This comment has been minimized.

Copy link

haxpor commented May 12, 2017

Hey, thank you it works! Anyway, i have 29UM68-P, and I want it to be at 60Hz. What's the setting I should set to? Above configuration target at 53Hz.

@haxpor

This comment has been minimized.

Copy link

haxpor commented May 12, 2017

According to @debdude about patch, I didn't install the patch, and tried to apply his setting. It didn't work on my setting (29UM68-P) and it's marked as invalid on SwitchResX. I guess I have to use the patch (as I really need 60Hz refresh rate).

Edit: Turned out even installed a patch, new native setting isn't showed up. I have to stick with the original setting of author of this gist to make it work without stretching. I have 10.12.5. Thanks

@nikkasala

This comment has been minimized.

Copy link

nikkasala commented May 19, 2017

It worked for me. I had lot of trouble while applying other patches but this one just went smooth. I should probably by the SwitchResX software now :/
Thanks for all the help!

@daggerhart

This comment has been minimized.

Copy link

daggerhart commented May 20, 2017

Worked for me. After the final restart I had to go to the normal OSX display settings and select the resolution. 2560x1080 didn't work for me, but there was also a 2048x864 option and it works perfectly. No trouble after reboot.

Hardware-
Monitor: LG 25UM56-P
Computer: Macbook Pro mid-2012
Connection: Mini-display port -> HDMI

@skiabox

This comment has been minimized.

Copy link

skiabox commented May 25, 2017

Just a comment.
If you want to make 60Hz work first apply the custom settings in SwitchResX and then after restarting the 60Hz setting is there!
I am using a macbook pro mid 2010 with a DELOCK 4k adaptor and my monitor is lg 29inch wide (2560x1080)

@aldwin

This comment has been minimized.

Copy link

aldwin commented Jun 7, 2017

just in case someone here loses the settings after upgrading to high sierra beta, I was able to resolve it by uninstalling switchresx, creating a new account on my mac, use that account to install and re enter the settings.

@haxpor

This comment has been minimized.

Copy link

haxpor commented Jun 10, 2017

@skiabox FYI: I tried to achieve 60Hz, didn't work for my LG 29UM68-P. The best possible I can do is the topmost setting. I tried debdude's setting, but SwitchResX didn't accept. But I think that's because it's the limitation on HDMI 2.0 which chained via mini display. Anyway, all else works fine for me.
@aldwin Thank you! I can confirm that this works. I also upgraded to High Sierra. What I did is the same. If you don't want to maintain that new user, that's fine. After switching to install SwitchResX as new user, reboot, make sure everything fine. Then log out and log in as your main user (usually Administrator). Finally remove that new user you used to install SwitchResX, and if needed select 3rd option to delete all user home folder. The latter just make sure you install SwitchResX globally for all users. Everything works the same.

@rzdev

This comment has been minimized.

Copy link

rzdev commented Jul 11, 2017

@debdude thank you for sharing, the patch works perfectly!

@andredaniel

This comment has been minimized.

Copy link

andredaniel commented Jul 24, 2017

Thanks a lot! Works perfectly 😃

@nomi2013

This comment has been minimized.

Copy link

nomi2013 commented Sep 12, 2017

Hi, I have Dell U2415 monitor its 16:10 aspect ratio.
While setup SwitchResX and set resolution 1920*1080
(16:9). But it's stretching. Am I missing something?

Thanks

@jaygooby

This comment has been minimized.

Copy link

jaygooby commented Sep 14, 2017

Also works on my MacBook Air (13-inch, Mid 2011), thanks!

@evansroony

This comment has been minimized.

Copy link

evansroony commented Sep 15, 2017

Hi all guys! My monitor lg-29UM69G, how do to setting SwitchResX 75 Hz?

@Kur1su0

This comment has been minimized.

Copy link

Kur1su0 commented Sep 21, 2017

Thanks! That works!

@jgarciabu

This comment has been minimized.

Copy link

jgarciabu commented Sep 21, 2017

I suspect that this setting (pixel clock) is what's keeping my LG 4K TV from displaying correctly. Does anyone know how to determine what pixel clock settings correspond to one's TV? My tv is an LG 43UJ6300 4K LED TV.

Here's a summary of the issue:

I’m working on getting an i5 Mac mini to display to an LG 4K tv for a studio we’re building at the office. I bought a Club 3D mini DP to HDMI adapter and downloaded/bought SwitchResX to unlock and utilize the higher resolutions and refresh rates. I can get the highest resolution and frame rate combination to work through SwitchResX, but as soon as I reboot the Mac Mini, after the Apple logo loading bar screen passes, the screen flickers and flashes green. I then have to unplug the HDMI cable from the adapter and plug it directly into the Mac Mini which then displays the Mac’s desktop. I can then plug it back into the adapter to take advantage of the SwitchResX resolution for 4K. I’ve scoured different forums to no avail. Has anyone seen anything similar? Any help is appreciated.

@brunolmoura

This comment has been minimized.

Copy link

brunolmoura commented Sep 26, 2017

Configuration 2560 x 1080 LG 21: 9 Monitor UltraWide has stopped working on the MacOS High Sierra. Any solution?

@evansroony

This comment has been minimized.

Copy link

evansroony commented Sep 26, 2017

@brunolmoura same problem I have after update

@lowryrussell

This comment has been minimized.

Copy link

lowryrussell commented Sep 26, 2017

@evansroony, @brunolmoura, I'm having the same problem with 2560x1080 after High Sierra update.

@TheBarros

This comment has been minimized.

Copy link

TheBarros commented Sep 26, 2017

I'm having the same problem with 2560x1080 after High Sierra update, any solution?

@pedropec

This comment has been minimized.

Copy link

pedropec commented Sep 27, 2017

I had to remake all the proccess in the switchresx in the high sierra and for doing that i’ve bought the app. But now its working just fine.

@evansroony

This comment has been minimized.

Copy link

evansroony commented Sep 27, 2017

Hi all! I had the same problem! but the solution is found) you need to remove all switchresx deamon on your computer from the program to the caches, then re-install switchresx and worked

@witwave

This comment has been minimized.

Copy link

witwave commented Sep 28, 2017

@evansroony how to remove all switchresx deamon

@evansroony

This comment has been minimized.

Copy link

evansroony commented Sep 28, 2017

@witwave Hi! First open the app activity monitor and clear daemon switchresx , then open app appCleaner and delete switchresx! Then open cleanMyMac clear your mac cache, and again install SwitchResx :)

@TheBarros

This comment has been minimized.

Copy link

TheBarros commented Sep 28, 2017

@evansroony @brunolmoura Thank you for everything. I got it.

@brunolmoura

This comment has been minimized.

Copy link

brunolmoura commented Sep 28, 2017

@evansroony I followed your tutorial and it worked, thank you.

@sternenhund

This comment has been minimized.

Copy link

sternenhund commented Oct 9, 2017

eric thank you so much. works just fine under mac os high sierra on my mid 2010 mbp with a LG 29UM58-P 21:9 monitor. followed your tutorial and ... sweeet!

@cnstntn-kndrtv

This comment has been minimized.

Copy link

cnstntn-kndrtv commented Oct 11, 2017

Thank you!

@eduardoassano

This comment has been minimized.

Copy link

eduardoassano commented Nov 1, 2017

HIGHSIERRA FIX!

I had the same problem, but I was able to fix it by resetting the factory settings in switchResX, then removing system preferences and deleting all records (i used cleanmymac3). After that, I created a new user and, following the same procedures, I was able to configure everything correctly. So I delete the user and it remained perfect. (Sorry for the translation, I used google translate)

ps: @haxpor, thanks for the tip, I got it because of your comment

Eu tive o mesmo problema, mas consegui corrigi-lo, redefinindo as configurações de fábrica no switchResX, removendo das preferências do sistema e excluindo todos os registros (usei o cleanmymac3). Depois disso, criei um novo usuário e, seguindo os mesmos procedimentos, consegui configurar tudo corretamente. Então eu exclui o usuário e permaneceu perfeito.

@Webreaper

This comment has been minimized.

Copy link

Webreaper commented Nov 10, 2017

Life-saver. Awesome - thanks!

@ffleandro

This comment has been minimized.

Copy link

ffleandro commented Nov 11, 2017

Doesn't work after update to High Sierra.

@enjey11

This comment has been minimized.

Copy link

enjey11 commented Nov 11, 2017

Doesn't work after update to High Sierra. x3

@fabriciohendrix

This comment has been minimized.

Copy link

fabriciohendrix commented Nov 11, 2017

Nice!

I followed all steps that @eduvertigem said and it worked out for me too.

Thanks!!

@deshi9012

This comment has been minimized.

Copy link

deshi9012 commented Nov 14, 2017

Doesn't work after update to High Sierra. :(

@tejeskifly

This comment has been minimized.

Copy link

tejeskifly commented Nov 15, 2017

Hi,

I trying to use this app with my MB air 2012 mid and macOS high sierra. I have LG 29UM58 21:9 monitor. Before this update, I'm using pixel clock patch but it's not working anymore.

With switchresX, I can set up higher resolution than 1920x1080 but the 2560x1080 resolution not available only 21:10 resolutions. I try to make a custom resolution, but after reboot, I saw status: Not activated - invalid?

kepernyofoto 2017-11-15 - 15 25 23

Any idea how can i make it work?

@leandrogneves

This comment has been minimized.

Copy link

leandrogneves commented Nov 20, 2017

This fix is not working for High Sierra for me either. It worked fine for Sierra, but not after updating the OS. Anyone has a solution? Thanks

---- Update Nov 21 2017
Now it works.

I contacted Stephane Madrau and he explained that changes were made to SwitchResX. If you had been using it for longer than 10 days, while updating to High Sierra it will stop working. After purchasing the license (US$ 16.00), it works. Not ideal, but it's the only option I found.

@ibnuh

This comment has been minimized.

Copy link

ibnuh commented Nov 21, 2017

My LG 25UM68-P can't detected on High Sierra, any advice?

@mendolaxian

This comment has been minimized.

Copy link

mendolaxian commented Nov 26, 2017

not working on High Sierra :(

@infodevart

This comment has been minimized.

Copy link

infodevart commented Nov 29, 2017

it worked fine for sierra but not anymore after updating to High Sierra

@kingadrock

This comment has been minimized.

Copy link

kingadrock commented Dec 2, 2017

I'm not "that" techie and don't know how to download the executable file https://github.com/Floris497/mac-pixel-clock-patch-V2. Can someone please help me. I can get to the code but don't see how to download and adding ".patch" at the end doesn't get me anywhere. Thanks!

@gatodeveloper

This comment has been minimized.

Copy link

gatodeveloper commented Dec 4, 2017

Fix High Sierra Steps:

  1. Uninstall switchresX app, try to uninstall with app cleaner and try clean with MyCleanMac
  2. Create a new mac user with admin permissions
  3. Log out current user and login with your new user admin
  4. Install switchresX in new admin profile(install in all user when the installator asks you) Note: Follow the top steps in this gist/page(README.md)
  5. Log out admin user and login with your real user
  6. Install switchresX
    Note 1: Follow the top steps in this gist/page(README.md)
    Note 2: If for some reason your latest switchresX uninstall doesn't work properly, you need to find a license number to switchresX to save new changes.
  7. Launch switchresX
  • if in your custom resolutions tab has not your latest monitor configuration do the step 4
    screen shot 2017-12-03 at 8 46 04 pm
  • If you have your latest configuration simply choose the configuration on you current resolutions tab
    screen shot 2017-12-03 at 8 45 08 pm
  1. Restart your mac

NOTE: The above steps work in my case I hope works for you.

@mouppai

This comment has been minimized.

Copy link

mouppai commented Dec 18, 2017

hello did some one already try to put 2 screan on a MBK pro end of 2013? I need to fix 2 screan on my MBK I already have a 2K passing by the thunderbolt port.
the question is can I fix One first screan on 4K by thunderbolt, and an other 2k by HDMI or the other thunderbolt port?

@timcharper

This comment has been minimized.

Copy link

timcharper commented Jan 27, 2018

Thank you ! Worked for me!

LG 34UM69G-B 34" 21:9 UltraWide IPS Gaming Monitor
Intel Graphics 630
High Sierra

@jtjoo

This comment has been minimized.

Copy link

jtjoo commented Feb 6, 2018

I had been finding solution for months... Thanks for this setting. Now I am almost got to cry when the resolution worked.

Floris497/mac-pixel-clock-patch-V2#177

This was my case.

@iamperi

This comment has been minimized.

Copy link

iamperi commented Feb 16, 2018

I just registered here to say you thanks, guys. It worked on my Mac Mini 2012. By the way I saw people saying if we would have a minidisplay port 1.2 to 1.4 HDMI adapter it might work (it won't be more than 10 USD on amazon). I will buy it just to try anyway.

Thanks a lot.

@FThompson

This comment has been minimized.

Copy link

FThompson commented Feb 18, 2018

@iamperi Let me know if you get that to work. I just bought a Mac Mini 2012 and am trying to set it up to output 1440p via mDP 1.2 -> HDMI 1.4 cable I purchased on Amazon. Monitor supports HDMI 1.4 in, so I believe it should work, but after running the patch to enable 2560x1440, the 1440p monitor indicates that no signal is being received.

@JeffersonFreitas

This comment has been minimized.

Copy link

JeffersonFreitas commented Feb 21, 2018

Thanks @erichrobinson e @gatodeveloper both solutions together solve my problem!

Thx See Ya!

@shahzeb1

This comment has been minimized.

Copy link

shahzeb1 commented Mar 6, 2018

What worked for me:

I am using the LG 29UM68-P monitor and after upgrading to High Sierra, SwitchResX completely failed to work.
My fix:

  1. Uninstall SwitchResX (instructions)
  2. Create a new user on the mac (as an administrator)
  3. Reboot, and log in as the new user
  4. Download switchresx and install for all users, then enter in the settings noted in this image

That should work.

CC: @tejeskifly

@filippos69

This comment has been minimized.

Copy link

filippos69 commented Mar 28, 2018

@FThompson or anyone else Do you maybe have any good switchresx settings to share for 2560x1440 resolution? i also have a Mac mini and a dell s2718d monitor and trying to get the best out of it. at the moment i am stuck with good 2048x1080 resolution, via both the hdmi and the mdport.

thanks,

@maxmumford

This comment has been minimized.

Copy link

maxmumford commented Mar 29, 2018

I was having trouble with my Late 2011 MacBook Pro on High Sierra and LG 29UM69G-B not letting me choose the correct resolution and instead defaulting to a very stretched 1920x1080. Bought a Firebolt to DisplayPort cable and it is now working perfectly. This is the one I got:

https://www.amazon.co.uk/gp/product/B01N12FB0W/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Item Name: Mini DisplayPort to DisplayPort 4K@60Hz 3M Cable, Benfei Mini DP(Thunderbolt Compatible) to Display Port Adapter Male to Male Gold-Plated Cord for MacBook, Lenovo, Dell and other Brand

Alternatively, I did manage to create a SwitchResX profile that more or less worked, although it was at 53hz instead of 60hz and the monitor showed me a warning to tell me that. I didn't bother resolving it though because I had already ordered the new cable. For anybody interested, here are the settings:

switchresx

@luizcelso

This comment has been minimized.

Copy link

luizcelso commented May 22, 2018

Thank you, man. You saved my life.

@macgeneral

This comment has been minimized.

Copy link

macgeneral commented Jun 23, 2018

I'm not sure if it works as I gave up bothering with HDMI on my late 2011 MBP but heres what my LG 29UM69G reports to SwtichResX over DisplayPort (I use HDMI 2.0 for my Linux/Windows PC instead of my prefered solution with HDMI for the MBP and DP for the way newer PC (luckily HDMI 2.0 still supports FreeSync on Windows :))).

The 75Hz setting requires FreeSync: Enable it in the Menu -> Picture -> Game Adjust -> FreeSync -> On

In general I'd suggest to use a Mini DisplayPort to DisplayPort cable for this screen (if your MacBook has Thunderbolt 1/2 it should support the full resolution out of the box -> if it's occupied with something else or you have a Thunderbolt Dock without a second TB connector you might have to go for HDMI).

I hope this helps (and works). Would be nice if someone could report back!

screen shot 2018-06-23 at 02 18 53 screen shot 2018-06-23 at 02 18 33

@suzukingdom

This comment has been minimized.

Copy link

suzukingdom commented Jun 25, 2018

I am also using 2011late. Likewise, the display port (Thunderbolt) did not use the Ultra Wide screen, so I connect it with the built-in HDMI port.
If you want to use the display port, why not try connecting a normal liquid crystal display?

@mattsfrey

This comment has been minimized.

Copy link

mattsfrey commented Jun 25, 2018

Hey Eric, just wanted to say thanks so much for putting this together. Having just bought an ultrawide and going through the initial pain of getting it to work, this page was an absolute lifesaver. Hands down one of the most intrinsically useful things i've encountered on the internet to solve a specific problem. Thanks!!!

@Dreamer-4pda

This comment has been minimized.

Copy link

Dreamer-4pda commented Jul 8, 2018

This is my little solution for LG 29WK600

  1. Open SwitchResX and press "Export EDID"
  2. Save file to your desktop or where you like
  3. Open in text editor and find your resolution stack
  4. Add new custom resolution and fill values as in a text file (see screenshot below)
  5. Save settings and push "Apply Now" button in right bottom corner
    If you lucky – Resolution will changing and status will sets to "Active"
    If nothing going on you need scale down "Pixel clock" value:
  6. Decrease value by one and repeat item number 5
    If no luck – do item number 6 again and again...

In my case value of PixelClock in EDID report was 181,25 MHz
But working value is 165 MHz

switchresx_lg29wk600

@BBKLAW

This comment has been minimized.

Copy link

BBKLAW commented Jul 10, 2018

Thanks this was helpful but... was getting a perpetual "not installed" in Switchresx. I tried the log in to a new admin user fix and that finally worked and got an active screen at 2560x1060. BUT now when I switch to that resolution the screen flickers and then goes black. Using 2015 MacBook air with High Sierra 10.13.5 . Any suggestion immeasurably appreciated.

@BBKLAW

This comment has been minimized.

Copy link

BBKLAW commented Jul 10, 2018

I don't think it matters, but its at 2560 x 1080 not 1060. Typo.

@Dreamer-4pda

This comment has been minimized.

Copy link

Dreamer-4pda commented Jul 12, 2018

BBKLAW, try my solution above

@LaFemmeBoss

This comment has been minimized.

Copy link

LaFemmeBoss commented Jul 22, 2018

I installed a custom res, rebotted my 2018 macbook air as prompted. Now the custom res reads "not activated" and it's not appearing on my external monitor as a resolution option in the displays setting in system preferences. Anyone know how to activate the custom resolution?

@rephlex00

This comment has been minimized.

Copy link

rephlex00 commented Jul 25, 2018

@FThompson

I just bought a Mac Mini 2012 and am trying to set it up to output 1440p via mDP 1.2 -> HDMI 1.4 cable I purchased on Amazon. Monitor supports HDMI 1.4 in, so I believe it should work, but after running the patch to enable 2560x1440, the 1440p monitor indicates that no signal is being received.

Did you ever get this to work?

@gneutzling

This comment has been minimized.

@alessandrogreco10

This comment has been minimized.

Copy link

alessandrogreco10 commented Sep 14, 2018

I'm using the provided configuration on a 2015 macbook pro, running El Capitan 10.11.6 with disabled SIP.

the resolution is the right one, however the screen goes randomly #black and start buzzing (static noise).

I tested the monitor with other devices and it does not present this problem

Can anyone help me?

@sonusclavis

This comment has been minimized.

Copy link

sonusclavis commented Oct 19, 2018

I have a macbook pro mid 2012 with osx 10.9 mavericks (yes, I use mavericks because I bought a bunch of work-programs-related that works just there). I cannot even see the monitor getting recognized.

I really need help. The monitor is working, tried it with my gf laptop and my ps3.
I'm using a minidisplay adaptor to hdmi

I tried the patch, and also installed the program, but i don't get the screen! i see when i connect the mbp screen shuts down for half a second. Also I tested the same adaptor and cable with a generic monitor and it works.

Please help!

@showsky

This comment has been minimized.

Copy link

showsky commented Oct 28, 2018

mac 10.14 can't work.
Can anyone help me solve it? Thank.

@basmeyer

This comment has been minimized.

Copy link

basmeyer commented Nov 28, 2018

I have a macbook pro mid 2012 with osx 10.9 mavericks (yes, I use mavericks because I bought a bunch of work-programs-related that works just there). I cannot even see the monitor getting recognized.

I really need help. The monitor is working, tried it with my gf laptop and my ps3.
I'm using a minidisplay adaptor to hdmi

I tried the patch, and also installed the program, but i don't get the screen! i see when i connect the mbp screen shuts down for half a second. Also I tested the same adaptor and cable with a generic monitor and it works.

Please help!

This might help for you :)
Floris497/mac-pixel-clock-patch-V2#267

@ohboyd

This comment has been minimized.

Copy link

ohboyd commented Dec 4, 2018

Just fixed my issue thanks to some of the help I found on here in conjunction with this page of the FAQs from SwitchResX. I started having my issue after upgrading to Mojave, and I've had black banding on the side of my monitor for like two weeks now. After disabling SIP, and going through the other steps on here, I realized that the actual issue was that my mid-2012 MacBook Pro connected to an LG 34UM68-P 34-Inch 21:9 UltraWide via Mini DisplayPort to HDMI didn't actually support 2560 X 1080 @ 60Hz. I had to try a few different values for the Hz before seeing that it actually could only handle 53Hz.

I kept seeing "Not Activated - in..." for my status after saving and rebooting, and it took a while to figure it out, but that just meant "Not Activated - invalid," meaning that the custom resolution wasn't a valid one. After trying a few, and rebooting, the picture below was the outcome, so it looks like 53Hz is the max my setup can run with, but it looks great, so I'm not complaining.
switchresx screenshot If anyone else is in a similar situation, it might benefit you to try a few other values that are less than 60. I'd be happy to help if you have similar issues with a similar setup!

Also, please support the dev!

@tiberio13

This comment has been minimized.

Copy link

tiberio13 commented Dec 14, 2018

I have a Late 2011 MacBook Pro connected to an LG Ultrawide 25UM58, I installed SwitchResX and I've been trying for hours to make it work in 21:9 but every time I add a custom resolution and click on Apply Now to try it my monitor image gets upside down (without any change on resolution) and SwitchRes displays this warning on my MacBook screen:
"The Display configuration has been modified
SwitchResX has detected that the display configuration has changed. All unsaved preferences are thus invalid and have been discarded."
Then I click OK and the screen goes back to normal, I tried many values and configurations and the same thing happens all the time, I already deactivated SIP and my MiniDP to HDMI adapter does support 21:9 (tested on my Late 2013 iMac that supports it natively) what should I do? Thanks for any help

@kopanef

This comment has been minimized.

Copy link

kopanef commented Feb 28, 2019

https://gist.github.com/erichrobinson/9755ba1f3ec45b289c40?signup=true#gistcomment-2785921

I have the same story. And nothing help me.

Ive tryed to do everything with
SwitchResX and used CoreDisplay driver

I have Mojave OS

What else i can try?

@xiaoyili

This comment has been minimized.

Copy link

xiaoyili commented Jun 16, 2019

Saved my day. Thank you author!!

@biaji

This comment has been minimized.

Copy link

biaji commented Oct 24, 2019

OK, now I'm just upgrade my os to catalina. And .. boom~

I can't restore my 2560x1080 resolution. Anyone have the same problem?

@lime679

This comment has been minimized.

Copy link

lime679 commented Oct 26, 2019

I too am now having this issue and cannot restore my old resolution on Catalina. I've uninstalled and reinstalled etc but nothing is working. Annoying.

@biaji

This comment has been minimized.

Copy link

biaji commented Oct 28, 2019

I too am now having this issue and cannot restore my old resolution on Catalina. I've uninstalled and reinstalled etc but nothing is working. Annoying.

I figure it out, try this:

https://www.madrau.com/support/support/faq_files/ns_SwitchResX_doesnt_save_my_setti.html

@lime679

This comment has been minimized.

Copy link

lime679 commented Oct 28, 2019

biaji,

Did you do anything else? I reinstalled Switch this morning and deleted that file. Added my setting(saved it), did a restart, and then realized it didn't even keep my added setting. Just the original in there and still not installed after a restart.
Screen Shot 2019-10-28 at 6 34 49 AM

@lime679

This comment has been minimized.

Copy link

lime679 commented Oct 28, 2019

I also noticed every time I go in and add my custom resolution and save, the file you mentioned to delete comes back. Well, a new version of it anyway,

@biaji

This comment has been minimized.

Copy link

biaji commented Oct 28, 2019

I also noticed every time I go in and add my custom resolution and save, the file you mentioned to delete comes back. Well, a new version of it anyway,

No, I believe the step should be:

1 uninstall switchresx totally.
2 delete the file metioned above. (Maybe there is another one in /Library/Preferences , also delete it)
3 reinstall switchresx

here you go.

@tudor-ghiorghiu

This comment has been minimized.

Copy link

tudor-ghiorghiu commented Nov 6, 2019

I also noticed every time I go in and add my custom resolution and save, the file you mentioned to delete comes back. Well, a new version of it anyway,

No, I believe the step should be:

1 uninstall switchresx totally.
2 delete the file metioned above. (Maybe there is another one in /Library/Preferences , also delete it)
3 reinstall switchresx

here you go.

Yea, didn't do it for me.

@rochapablo

This comment has been minimized.

Copy link

rochapablo commented Nov 6, 2019

Also getting status: not installed after upgrade to macOS Catalina

@rochapablo

This comment has been minimized.

Copy link

rochapablo commented Nov 6, 2019

Check this:

Solves a bug that continuously prevented SwitchResX to save new resolutions after OS Upgrade (the program would report "Not installed" in the custom resolutions list)

SwitchResX 4.2.7 released

Maybe the bug still after all those versions.

@Ytroc

This comment has been minimized.

Copy link

Ytroc commented Nov 7, 2019

Had the same issue. My LG Ultrawide 21:9 was showing the 2 black stripes on the sides (1920x1080) after upgrading to Catalina.

I registered my software and immediately the thing responded. Now I have my full with monitor.
It cost me a couple of beers.

@TheDigitalBug

This comment has been minimized.

Copy link

TheDigitalBug commented Dec 3, 2019

any solution with "SwitchResX has detected that the display configuration has changed. All unsaved preferences are thus invalid and have been discarded." ?

Catalina 10.15.1
MacBook Air 2015
Sony 4K TV

Monitor detected but TV with black screen.

@wwaibel

This comment has been minimized.

Copy link

wwaibel commented Dec 6, 2019

Hello
I use a LG 38WK95C-W 21:9 with a native resolution of 3.840 x 1.600 @ 75 Hz on a MacBookPro 2019 16'' with Catalina OS.
I have connected the display through USB-C. I am not able to to get the display to work without flickering. I am using this settings:
Bildschirmfoto 2019-12-06 um 17 33 42

Can you give me a hint, how to configure SwitchResX to get an unscaled desktop on the LG?

Thanks and greetings,
Wimpf

@rochapablo

This comment has been minimized.

Copy link

rochapablo commented Dec 6, 2019

SwitchResX was working. But it stops after Catalina OS update. Many others things like local variables had stop too. After the update I tried to reinstall SwitchResX in many ways but without success. I'm thinking about format my laptop and see if I can fix this, but I'm too lazy to do so.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.