Skip to content

Instantly share code, notes, and snippets.

@erikcas
Created August 28, 2013 17:39
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save erikcas/6368909 to your computer and use it in GitHub Desktop.
Save erikcas/6368909 to your computer and use it in GitHub Desktop.
MTD 3.0.93 samsung gio boot
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.0.93-perf-g95014a6-dirty (erik@eriktopper) (gcc version 4.6.3 20120624 (prerelease) (Ubuntu/Linaro 4.6.3-8ubuntu1) ) #3 PREEMPT Wed Aug 28 19:03:19 CEST 2013
<4>[ 0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387d
<4>[ 0.000000] CPU: VIPT aliasing data cache, unknown instruction cache
<4>[ 0.000000] Machine: GT-S5660 Board
<6>[ 0.000000] Partition (from atag) mibib -- Offset:0 Size:6
<6>[ 0.000000] Partition (from atag) qcsbl -- Offset:6 Size:2
<6>[ 0.000000] Partition (from atag) oemsbl -- Offset:8 Size:3
<6>[ 0.000000] Partition (from atag) amss -- Offset:b Size:64
<6>[ 0.000000] Partition (from atag) efs2 -- Offset:6f Size:24
<6>[ 0.000000] Partition (from atag) nv_backup -- Offset:93 Size:14
<6>[ 0.000000] Partition (from atag) arm11boot -- Offset:a7 Size:8
<6>[ 0.000000] Partition (from atag) boot -- Offset:af Size:20
<6>[ 0.000000] Partition (from atag) recovery -- Offset:cf Size:20
<6>[ 0.000000] Partition (from atag) parameter -- Offset:ef Size:3
<6>[ 0.000000] Partition (from atag) fota -- Offset:f2 Size:18
<6>[ 0.000000] Partition (from atag) system -- Offset:10a Size:365
<6>[ 0.000000] Partition (from atag) userdata -- Offset:46f Size:2f1
<6>[ 0.000000] Partition (from atag) cache -- Offset:760 Size:74
<4>[ 0.000000] Gio H/W revision : 0x010
<6>[ 0.000000] memory pool 3 (start 25a00000 size 2600000) initialized
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<3>[ 0.000000] smem_find(137, 72): wrong size 56
<3>[ 0.000000] smem_find(137, 64): wrong size 56
<3>[ 0.000000] smem_find(137, 64): wrong size 56
<6>[ 0.000000] socinfo_init: v2, id=67, ver=3.0, raw_id=961, raw_ver=5
<1>[ 0.000000] Initialized strongly ordered page successfully
<6>[ 0.000000] L210 cache controller enabled
<6>[ 0.000000] L210 cache controller enabled
<6>[ 0.000000] l2x0: 4 ways, CACHE_ID 0x4100544f, AUX_CTRL 0x0006801b, Cache size: 262144 B
<7>[ 0.000000] On node 0 totalpages: 74752
<7>[ 0.000000] free_area_init_node: node 0, pgdat c0794370, node_mem_map c0980000
<7>[ 0.000000] Normal zone: 660 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 74092 pages, LIFO batch:15
<6>[ 0.000000] allocating 2326528 bytes at c0c16000 (14216000 physical) for fb
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 74092
<5>[ 0.000000] Kernel command line: mem=330M console=NULL hw=10 fbaddr=0xf6000
<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Memory: 292MB = 292MB total
<5>[ 0.000000] Memory: 281816k/281816k available, 56104k reserved, 0K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
<5>[ 0.000000] vmalloc : 0xd5000000 - 0xfa000000 ( 592 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xd4a00000 ( 330 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc002f000 ( 156 kB)
<5>[ 0.000000] .text : 0xc002f000 - 0xc07071b4 (7009 kB)
<5>[ 0.000000] .data : 0xc0708000 - 0xc07a6a30 ( 635 kB)
<5>[ 0.000000] .bss : 0xc07a6a54 - 0xc097bf98 (1878 kB)
<4>[ 0.000000] ------------[ cut here ]------------
<4>[ 0.000000] WARNING: at arch/arm/kernel/hw_breakpoint.c:142 get_debug_arch+0x38/0x68()
<4>[ 0.000000] CPUID feature registers not supported. Assuming v6 debug is present.
<4>[ 0.000000] Modules linked in:
<4>[ 0.000000] [<c003a984>] (unwind_backtrace+0x0/0x11c) from [<c009b42c>] (warn_slowpath_common+0x4c/0x64)
<4>[ 0.000000] [<c009b42c>] (warn_slowpath_common+0x4c/0x64) from [<c009b4c4>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 0.000000] [<c009b4c4>] (warn_slowpath_fmt+0x2c/0x3c) from [<c003b2d8>] (get_debug_arch+0x38/0x68)
<4>[ 0.000000] [<c003b2d8>] (get_debug_arch+0x38/0x68) from [<c003b460>] (hw_breakpoint_slots+0xc/0x58)
<4>[ 0.000000] [<c003b460>] (hw_breakpoint_slots+0xc/0x58) from [<c001438c>] (init_hw_breakpoint+0xc/0xa0)
<4>[ 0.000000] [<c001438c>] (init_hw_breakpoint+0xc/0xa0) from [<c001432c>] (perf_event_init+0xa0/0xf4)
<4>[ 0.000000] [<c001432c>] (perf_event_init+0xa0/0xf4) from [<c000892c>] (start_kernel+0x168/0x2e8)
<4>[ 0.000000] [<c000892c>] (start_kernel+0x168/0x2e8) from [<1360803c>] (0x1360803c)
<4>[ 0.000000] ---[ end trace 1b75b31a2719ed1c ]---
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] NR_IRQS:261
<6>[ 0.000000] sched_clock: 27 bits at 600kHz, resolution 1666ns, wraps every 223696ms
<6>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.000414] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
<6>[ 0.080183] pid_max: default: 32768 minimum: 301
<6>[ 0.080619] Mount-cache hash table entries: 512
<6>[ 0.081323] Initializing cgroup subsys cpuacct
<6>[ 0.081383] Initializing cgroup subsys freezer
<6>[ 0.081458] CPU: Testing write buffer coherency: ok
<6>[ 0.081979] hw perfevents: enabled with v6 PMU driver, 3 counters available
<6>[ 0.085058] print_constraints: dummy:
<3>[ 0.085131] rdev_init_debugfs: Error-Bad Function Input
<6>[ 0.085446] NET: Registered protocol family 16
<6>[ 0.087779] print_constraints: smps0: 750 <--> 3050 mV normal
<6>[ 0.088096] print_constraints: smps1: 750 <--> 3050 mV normal
<6>[ 0.088341] print_constraints: smps2: 750 <--> 3050 mV normal
<6>[ 0.088623] print_constraints: smps3: 750 <--> 3050 mV normal
<6>[ 0.088883] print_constraints: ldo00: 2850 mV normal
<6>[ 0.089151] print_constraints: ldo01: 2600 mV normal
<6>[ 0.089421] print_constraints: ldo02: 2600 mV normal
<6>[ 0.089701] print_constraints: ldo03: 2850 mV normal
<6>[ 0.089994] print_constraints: ldo04: 2850 mV normal
<6>[ 0.090354] print_constraints: ldo05: 2850 mV normal
<6>[ 0.090659] print_constraints: ldo06: 3300 mV normal
<6>[ 0.090924] print_constraints: ldo07: 2700 mV normal
<6>[ 0.091223] print_constraints: ldo08: 2700 mV normal
<6>[ 0.091478] print_constraints: ldo09: 2900 mV normal
<6>[ 0.091786] print_constraints: ldo10: 2600 mV normal
<6>[ 0.092063] print_constraints: ldo11: 1800 mV normal
<6>[ 0.092366] print_constraints: ldo12: 1800 mV normal
<6>[ 0.092648] print_constraints: ldo13: 1800 <--> 2850 mV normal
<6>[ 0.092956] print_constraints: ldo14: 2700 mV normal
<6>[ 0.093223] print_constraints: ldo15: 2600 mV normal
<6>[ 0.093539] print_constraints: ldo16: 2850 <--> 3000 mV normal
<6>[ 0.093859] print_constraints: ldo17: 1300 mV normal
<6>[ 0.094136] print_constraints: maxldo03: 3000 mV normal
<6>[ 0.094451] print_constraints: maxldo04: 2800 <--> 3000 mV normal
<6>[ 0.094749] print_constraints: maxldo05: 1800 <--> 3000 mV normal
<6>[ 0.095076] print_constraints: maxldo06: 2600 <--> 3000 mV normal
<6>[ 0.095366] print_constraints: maxldo08: 2600 <--> 2800 mV normal
<6>[ 0.095683] print_constraints: maxldo09: 2800 mV normal
<6>[ 0.095966] print_constraints: maxldo10: 1200 <--> 2800 mV normal
<6>[ 0.096296] print_constraints: maxldo12: 2600 mV normal
<6>[ 0.096613] print_constraints: maxldo13: 3300 mV normal
<6>[ 0.096933] print_constraints: maxldo14: 2600 mV normal
<6>[ 0.097224] print_constraints: maxldo15: 1800 <--> 2850 mV normal
<6>[ 0.097583] print_constraints: maxldo16: 2850 <--> 3000 mV normal
<6>[ 0.097959] print_constraints: maxldo17: 3000 mV normal
<6>[ 0.098258] print_constraints: maxldo18: 3300 mV normal
<6>[ 0.098593] print_constraints: maxldo19: 2600 <--> 3300 mV normal
<6>[ 0.098778] acpuclk_7627_init()
<6>[ 0.098811] Shared PLL control available.
<6>[ 0.098986] L val: PLL0: 50, PLL1: 12, PLL2: 41
<6>[ 0.099151] ACPU running at 400000 KHz
<6>[ 0.099176] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 D4 U0 U1 U2 U4
<6>[ 0.099224] 0 19200 -1 1 19200 1 30720 -1 -1 -1 -1 5 4 6 -1
<6>[ 0.099271] 1 120000 0 8 60000 2 61440 -1 -1 -1 -1 7 4 6 -1
<6>[ 0.099316] 2 122880 1 2 61440 2 61440 1 -1 -1 -1 7 4 6 -1
<6>[ 0.099363] 3 200000 2 4 66667 3 61440 1 2 -1 -1 7 4 6 -1
<6>[ 0.099409] 4 245760 1 1 122880 2 61440 1 2 3 -1 7 -1 6 -1
<6>[ 0.099458] 5 320000 0 3 160000 2 160000 1 2 3 -1 7 -1 6 -1
<6>[ 0.099503] 6 400000 2 2 133333 3 160000 1 2 3 -1 7 -1 8 -1
<6>[ 0.099549] 7 480000 0 2 160000 3 160000 1 2 3 -1 -1 -1 8 -1
<6>[ 0.099596] 8 800000 2 1 200000 4 200000 7 -1 6 -1 -1 -1 -1 -1
<6>[ 0.104184] msm7x2x_init : msm7x2x_init #####
<3>[ 0.105324] Error configuraing GPIO_WLAN_HOST_WAKE
<6>[ 0.105969] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
<6>[ 0.106013] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[ 0.109391] print_constraints: fs_gfx3d: normal
<6>[ 0.132629] bio: create slab <bio-0> at 0
<5>[ 0.134129] SCSI subsystem initialized
<6>[ 0.134451] usbcore: registered new interface driver usbfs
<6>[ 0.134663] usbcore: registered new interface driver hub
<6>[ 0.134904] usbcore: registered new device driver usb
<6>[ 0.135654] i2c-gpio i2c-gpio.2: using pins 23 (SDA) and 30 (SCL)
<6>[ 0.136096] i2c-gpio i2c-gpio.3: using pins 91 (SDA) and 90 (SCL)
<6>[ 0.136554] i2c-gpio i2c-gpio.5: using pins 37 (SDA) and 36 (SCL)
<6>[ 0.136729] msm_i2c_probe
<6>[ 0.136909] msm_i2c_probe: clk_ctl 316, 384000 Hz
<6>[ 0.138086] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[ 0.139259] Bluetooth: Core ver 2.16
<6>[ 0.139386] NET: Registered protocol family 31
<6>[ 0.139406] Bluetooth: HCI device and connection manager initialized
<6>[ 0.139436] Bluetooth: HCI socket layer initialized
<6>[ 0.139456] Bluetooth: L2CAP socket layer initialized
<6>[ 0.139824] Bluetooth: SCO socket layer initialized
<6>[ 0.140171] Switching to clocksource dg_timer
<6>[ 0.155233] NET: Registered protocol family 2
<6>[ 0.155569] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.156374] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.157073] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.157553] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.157578] TCP reno registered
<6>[ 0.157604] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.157673] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.158301] NET: Registered protocol family 1
<6>[ 0.159098] RPC: Registered named UNIX socket transport module.
<6>[ 0.159128] RPC: Registered udp transport module.
<6>[ 0.159148] RPC: Registered tcp transport module.
<6>[ 0.159169] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 0.159593] Trying to unpack rootfs image as initramfs...
<6>[ 0.514866] Freeing initrd memory: 2104K
<3>[ 0.519309] Notify: smsm init
<6>[ 0.530319] rpcrouter_smd_remote_notify: smd opened 0x (null)
<6>[ 0.550426] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 0.550441] tick = 105470
<6>[ 0.550451] stamp = 4294967295
<3>[ 0.550491] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[ 0.557159] [adsp.c:adsp_init] rs3000000a -- 0
<6>[ 0.559169] [audpp.c:audpp_probe] Number of decoder supported 5
<6>[ 0.559201] [audpp.c:audpp_probe] Number of concurrency supported 8
<6>[ 0.559228] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[ 0.559251] [audpp.c:audpp_probe] queueid:13
<6>[ 0.559273] [audpp.c:audpp_probe] decid:0
<6>[ 0.559293] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.559316] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[ 0.559339] [audpp.c:audpp_probe] queueid:14
<6>[ 0.559361] [audpp.c:audpp_probe] decid:1
<6>[ 0.559381] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.559404] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[ 0.559428] [audpp.c:audpp_probe] queueid:15
<6>[ 0.559448] [audpp.c:audpp_probe] decid:2
<6>[ 0.559469] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.559493] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[ 0.559516] [audpp.c:audpp_probe] queueid:16
<6>[ 0.559536] [audpp.c:audpp_probe] decid:3
<6>[ 0.559558] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.559581] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[ 0.559604] [audpp.c:audpp_probe] queueid:17
<6>[ 0.559624] [audpp.c:audpp_probe] decid:4
<6>[ 0.559646] [audpp.c:audpp_probe] nr_codec_support:1
<6>[ 0.560414] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 0.560428] tick = 211613
<6>[ 0.560438] stamp = 55666104755814400
<3>[ 0.560471] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<4>[ 0.564044] [VIB] platform driver register result : 0
<6>[ 0.566304] ashmem: initialized
<7>[ 0.568856] yaffs: yaffs built Aug 28 2013 07:01:18 Installing.
<6>[ 0.568933] msgmni has been set to 554
<6>[ 0.570949] io scheduler noop registered
<6>[ 0.571129] io scheduler cfq registered (default)
<3>[ 0.571278] fbaddr cmdline is null
<3>[ 0.571884] msm_ion_client_create() return error, val ffffffed
<4>[ 0.574078] @@@@@ lcdc_s6d16a0x_panel_init - panel_initialized = TRUE
<4>[ 0.574111] ++++++lcdc_s6d16a0x_panel_init
<4>[ 0.574216] ++++++pdev->id=0
<4>[ 0.574343] @@@@@ s6d16a0x_esd_irq_handler - IRQ
<4>[ 0.574524] @@@@@ s6d16a0x_probe - irq is requested normally
<3>[ 0.580606] pm_runtime: fail to wake up
<4>[ 0.610441] s6d16a0x_GIO start lcdc_s6d16a0x_panel_on
<4>[ 0.610466] [HSIL] mdp_lcdc_on(317) mdp_lcdc_on end
<6>[ 0.640886] Console: switching to colour frame buffer device 40x30
<6>[ 0.651701] FrameBuffer[0] 320x480 size=1228800 bytes is registered successfully!
<4>[ 0.651814] load_565rle_image: Can not open /initlogo.rle
<7>[ 0.652368] Registered led device: lcd-backlight
<4>[ 0.652461] --lcdc_s6d16a0x_panel_init
<4>[ 0.652488] s6d16a0x_GIO start determine_lcd_type
<4>[ 0.652896] ldi mtpdata: ff ff ff
<4>[ 0.652911] lcd type is SMD
<4>[ 0.652928] @@@@@ lcdc_s6d16a0x_panel_init - panel_initialized = FALSE
<6>[ 0.653993] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[ 0.680518] msm_serial_hs.1: ttyHS1 at MMIO 0xa0300000 (irq = 52) is a MSM HS UART
<6>[ 0.710403] msm_serial_hs module loaded
<6>[ 0.713226] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
<6>[ 0.721376] brd: module loaded
<6>[ 0.726703] loop: module loaded
<6>[ 0.726983] pmem: Initializing pmem (user-space) as cached
<6>[ 0.727423] allocating 28794880 bytes at (null) (25a00000 physical) for pmem
<6>[ 0.727594] pmem: Initializing pmem_adsp (user-space) as non-cached
<6>[ 0.727914] allocating 10346496 bytes at (null) (27576000 physical) for pmem_adsp
<6>[ 0.728066] pmem: Initializing pmem_audio (user-space) as non-cached
<6>[ 0.728349] allocating 372736 bytes at (null) (27f54000 physical) for pmem_audio
<6>[ 0.729804] SCSI Media Changer driver v0.25
<6>[ 0.731038] msm_nand_probe: phys addr 0xa0a00000
<6>[ 0.731079] msm_nand_probe: dmac 0x7
<6>[ 0.731158] msm_nand_probe: allocated dma buffer at ffdea000, dma_addr 24e7a000
<6>[ 0.731344] status: /20
<6>[ 0.731366] nandid: 80d0d1d0 maker d0 device d1
<3>[ 0.731399] ERROR: unknown nand device manuf=d0 devid=d1
<6>[ 0.731481] SFLASHC Async Mode bit: 0
<6>[ 0.731551] =================================================================
<6>[ 0.731581] flash_onenand_probe: manufacturer_id = 0xec
<6>[ 0.731603] flash_onenand_probe: device_id = 0x50
<6>[ 0.731624] flash_onenand_probe: version_id = 0x241
<6>[ 0.731646] flash_onenand_probe: data_buf_size = 0x800
<6>[ 0.731668] flash_onenand_probe: boot_buf_size = 0x200
<6>[ 0.731691] flash_onenand_probe: num_of_buffers = 0x101
<6>[ 0.731713] flash_onenand_probe: technology = 0x0
<6>[ 0.731733] =================================================================
<6>[ 0.731759] Found a supported onenand device
<5>[ 0.731793] Creating 14 MTD partitions on "msm_nand":
<5>[ 0.731831] 0x000000000000-0x000000180000 : "mibib"
<5>[ 0.735203] 0x000000180000-0x000000200000 : "qcsbl"
<5>[ 0.737489] 0x000000200000-0x0000002c0000 : "oemsbl"
<5>[ 0.740006] 0x0000002c0000-0x000001bc0000 : "amss"
<5>[ 0.765429] 0x000001bc0000-0x0000024c0000 : "efs2"
<5>[ 0.775548] 0x0000024c0000-0x0000029c0000 : "nv_backup"
<5>[ 0.781903] 0x0000029c0000-0x000002bc0000 : "arm11boot"
<5>[ 0.785438] 0x000002bc0000-0x0000033c0000 : "boot"
<5>[ 0.794748] 0x0000033c0000-0x000003bc0000 : "recovery"
<5>[ 0.803976] 0x000003bc0000-0x000003c80000 : "parameter"
<5>[ 0.806426] 0x000003c80000-0x000004280000 : "fota"
<5>[ 0.813883] 0x000004280000-0x000011bc0000 : "system"
<5>[ 1.019438] 0x000011bc0000-0x00001d800000 : "userdata"
<5>[ 1.199338] 0x00001d800000-0x00001f500000 : "cache"
<6>[ 1.228478] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[ 1.228516] CSLIP: code copyright 1989 Regents of the University of California.
<6>[ 1.229504] rmnet_init: SMD devices[8]
<3>[ 1.237784] msm_hsusb_vbus_shutdown: vbus_shutdown rpc failed before call,rc = 0
<3>[ 1.239334] msm_otg_probe: chg_init failed
<6>[ 1.239659] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.239959] host driver registered w/ tranceiver
<6>[ 1.240366] usbcore: registered new interface driver cdc_acm
<6>[ 1.240393] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 1.240419] Initializing USB Mass Storage driver...
<6>[ 1.240579] usbcore: registered new interface driver usb-storage
<6>[ 1.240603] USB Mass Storage support registered.
<6>[ 1.240733] usbcore: registered new interface driver usb_ehset_test
<6>[ 1.241416] peripheral driver registered w/ tranceiver
<6>[ 1.246841] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 1.246879] android_usb gadget: Number of LUNs=1
<6>[ 1.246908] lun0: LUN: removable file: (no medium)
<6>[ 1.247588] android_usb gadget: android_usb ready
<4>[ 1.247923] [TSP] synaptics_ts_init
<4>[ 1.248231] [TSP] synaptics_ts_probe, 578
<6>[ 1.700663] android_work: did not send uevent (0 0 (null))
<6>[ 1.950254] synaptics_ts_probe: max_x: 320, max_y: 480
<6>[ 1.950758] input: sec_touchscreen as /devices/virtual/input/input0
<4>[ 1.951081] [TSP] synaptics_ts_probe, irq=83
<6>[ 1.951199] synaptics_ts_probe: Start touchscreen sec_touchscreen in interrupt mode
<4>[ 1.953368] [TSP] Error code : 485
<4>[ 1.955273] [TSP] Error code : 485
<4>[ 2.062279] [TSP] Error code : 485
<4>[ 2.172136] [TSP] Error code : 485
<4>[ 2.282134] [TSP] Error code : 485
<4>[ 2.392128] [TSP] Error code : 485
<4>[ 2.502124] [TSP] Error code : 485
<4>[ 2.612156] [TSP] Error code : 485
<4>[ 2.722123] [TSP] Error code : 485
<4>[ 2.832121] [TSP] Error code : 485
<4>[ 2.942123] [TSP] Error code : 485
<4>[ 2.942141] [TSP] read failed : i==9 && HW_ver == 0
<4>[ 3.050244] [TSP] synaptics_ts_probe: 704, buf[1]=0, buf[2]=0
<4>[ 3.050266] [TSP] emergency firmware UPDATE
<6>[ 3.050288] [TSP] firm_update, 1189
<4>[ 3.050304] [TSP] disable_irq : 1191
<6>[ 3.050336] [TSP] cypress_update, 197, HW ver=0
<3>[ 3.150551] update_voltage: requested voltage range [2600000, 2600000] for maxldo06 does not fit within previously voted range: [3000000, 3000000]
<6>[ 8.477108] [TSP] fDetectHiLoTransition, 284 : Error
<6>[ 8.477133] [TSP] fPowerCycleInitializeTargetForISSP, 372
<6>[ 8.477156] [TSP] cypress_update, 247
<4>[ 8.477188] ------------[ cut here ]------------
<4>[ 8.477244] WARNING: at drivers/regulator/core.c:1529 _regulator_disable+0x3c/0x120()
<4>[ 8.477271] unbalanced disables for maxldo06
<4>[ 8.477289] Modules linked in:
<4>[ 8.477388] [<c003a984>] (unwind_backtrace+0x0/0x11c) from [<c009b42c>] (warn_slowpath_common+0x4c/0x64)
<4>[ 8.477448] [<c009b42c>] (warn_slowpath_common+0x4c/0x64) from [<c009b4c4>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 8.477506] [<c009b4c4>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0242138>] (_regulator_disable+0x3c/0x120)
<4>[ 8.477564] [<c0242138>] (_regulator_disable+0x3c/0x120) from [<c024224c>] (regulator_disable+0x30/0x128)
<4>[ 8.477636] [<c024224c>] (regulator_disable+0x30/0x128) from [<c031714c>] (cypress_update+0x1c0/0x3c4)
<4>[ 8.477696] [<c031714c>] (cypress_update+0x1c0/0x3c4) from [<c03167c8>] (firm_update+0x5c/0x124)
<4>[ 8.477753] [<c03167c8>] (firm_update+0x5c/0x124) from [<c0316d00>] (synaptics_ts_probe+0x470/0x680)
<4>[ 8.477818] [<c0316d00>] (synaptics_ts_probe+0x470/0x680) from [<c0320e18>] (i2c_device_probe+0xc8/0x100)
<4>[ 8.477886] [<c0320e18>] (i2c_device_probe+0xc8/0x100) from [<c0276b70>] (driver_probe_device+0x144/0x268)
<4>[ 8.477944] [<c0276b70>] (driver_probe_device+0x144/0x268) from [<c0276cf4>] (__driver_attach+0x60/0x84)
<4>[ 8.478001] [<c0276cf4>] (__driver_attach+0x60/0x84) from [<c0275c18>] (bus_for_each_dev+0x50/0x90)
<4>[ 8.478056] [<c0275c18>] (bus_for_each_dev+0x50/0x90) from [<c0276354>] (bus_add_driver+0xbc/0x240)
<4>[ 8.478113] [<c0276354>] (bus_add_driver+0xbc/0x240) from [<c0277210>] (driver_register+0xa0/0x12c)
<4>[ 8.478178] [<c0277210>] (driver_register+0xa0/0x12c) from [<c0322a50>] (i2c_register_driver+0x40/0xd8)
<4>[ 8.478254] [<c0322a50>] (i2c_register_driver+0x40/0xd8) from [<c002f3bc>] (do_one_initcall+0x90/0x160)
<4>[ 8.478314] [<c002f3bc>] (do_one_initcall+0x90/0x160) from [<c0008b2c>] (kernel_init+0x80/0x124)
<4>[ 8.478368] [<c0008b2c>] (kernel_init+0x80/0x124) from [<c0035c74>] (kernel_thread_exit+0x0/0x8)
<4>[ 8.478401] ---[ end trace 1b75b31a2719ed1d ]---
<6>[ 9.480253] [TSP] firm_update fail, 1217
<4>[ 9.480273] [TSP] enable_irq : 1221
<3>[ 9.480296] i2c_transfer failed
<4>[ 9.482208] [TSP] Error code : 485
<4>[ 9.484109] [TSP] Error code : 485
<4>[ 9.592133] [TSP] Error code : 485
<4>[ 9.702123] [TSP] Error code : 485
<4>[ 9.812153] [TSP] Error code : 485
<4>[ 9.922131] [TSP] Error code : 485
<4>[ 10.032121] [TSP] Error code : 485
<4>[ 10.142294] [TSP] Error code : 485
<4>[ 10.252126] [TSP] Error code : 485
<4>[ 10.362124] [TSP] Error code : 485
<4>[ 10.472123] [TSP] Error code : 485
<4>[ 10.472141] [TSP] i2c read 2 : i==9 && HW_ver == 0
<4>[ 10.580244] [TSP] i=10 && HW_ver = 0, ret=-6
<4>[ 10.580274] [TSP] synaptics_ts_probe, ln:739, Failed to register TSP!!!
<4>[ 10.580289] check the i2c line!!!, ret=-6
<4>[ 10.580663] [gpio_event_matrix_func:628] hw rev = 10
<6>[ 10.580956] GPIO Matrix Keypad Driver: Start keypad matrix for sec_key in interrupt mode
<6>[ 10.581543] input: sec_key as /devices/virtual/input/input1
<7>[ 10.583006] RTC Registering with rs30000048
<3>[ 10.584269] msm_rpc_client_req: RPC call was not successful (3)
<7>[ 10.584304] msmrtc_setup_cb: RPC client registration for PROC:12 failed
<7>[ 10.584338] rs30000048 rs30000048.65536: msmrtc_probe: Could not initialize RPC callback
<7>[ 10.584919] msmrtc_tod_proc_result: 08/28/2013 17:38:42 (02)
<6>[ 10.585768] using rtc device, msm_rtc, for alarms
<7>[ 10.585799] msm_rtc: dev (254:0)
<6>[ 10.585878] rs30000048 rs30000048.65536: rtc core: registered msm_rtc as rtc0
<7>[ 10.586639] msmrtc_tod_proc_result: 02/25/2007 21:32:09 (06)
<7>[ 10.587004] msm_rtc_secure: dev (254:1)
<6>[ 10.587033] rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secure as rtc1
<6>[ 10.587159] i2c /dev entries driver
<6>[ 10.588534] [FSA9280]: probe
<6>[ 10.588554] [FSA9280]: init
<4>[ 10.589789] [FSA9280]: Initial control reg 0x02 : 0x1e
<6>[ 10.600291] [FSA9280]: fsa9280 sensor init sequence done
<6>[ 10.600406] [FSA9280]: probe complete
<6>[ 10.600513] taos_opt_init
<3>[ 10.600604] regulator_enable: maxldo04: invalid input - constraint: [2800000, 3000000], set point: [0, 0]
<6>[ 10.600639] [taos_opt_probe] slave addr = 39
<6>[ 10.628614] TAOS Device detected!
<6>[ 10.628819] Workqueue Settings complete
<6>[ 10.631619] [TAOS] register irq = 91
<6>[ 10.631646] [TAOS] register wakeup source = 0
<6>[ 10.631664] INT Settings complete
<6>[ 10.631681] taos_off(2)
<6>[ 10.632223] taos_off voltage down(2)
<6>[ 10.632241] [TAOS] unregister irq = 91
<6>[ 10.632261] [TAOS] register wakeup source = 0
<4>[ 10.632281] taos_off(500): taos power off
<6>[ 10.632298] disable irq for proximity
<6>[ 10.632316] taos_opt_probe is OK!!
<4>[ 10.632413] i2c-core: driver [taos] using legacy suspend method
<4>[ 10.632438] i2c-core: driver [taos] using legacy resume method
<6>[ 10.632619] lirc_dev: IR Remote Control driver registered, major 247
<6>[ 10.632646] IR NEC protocol handler initialized
<6>[ 10.632666] IR RC5(x) protocol handler initialized
<6>[ 10.632686] IR RC6 protocol handler initialized
<6>[ 10.632704] IR JVC protocol handler initialized
<6>[ 10.632724] IR Sony protocol handler initialized
<6>[ 10.632744] IR RC5 (streamzap) protocol handler initialized
<6>[ 10.632766] IR LIRC bridge handler initialized
<4>[ 10.632786] [Battery] msm_batt_init
<3>[ 10.633148] [Battery] msm_batt_probe
<6>[ 10.635163] batt_clnt_handle = 0
<6>[ 10.635761] msm_batt_enable_filter: vbatt Filter enabled successfully.
<3>[ 10.668969] [Battery] get_charger_type charger_type is (2)
<4>[ 10.668996] [Battery] get_charger_type : wake_lock!!! !!!!
<4>[ 10.669046] [Battery] Check VF value [0x0] (when first charger connected!)
<4>[ 10.670141] [Battery] get_charging_status : event_flag =8
<4>[ 10.670401] [Battery] Charging state is changed [ff]=>[5] Batt Level [3703] Percent [100]
<6>[ 10.673669] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
<6>[ 10.674313] Bluetooth: MSM Sleep Mode Driver Ver 1.1
<6>[ 10.676359] mmc0: mci-version: 0
<3>[ 10.676533] mmc0: No card detect facilities available
<6>[ 10.677976] mmc0: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 24,0 dma 8 dmacrcri 6
<6>[ 10.678006] mmc0: 8 bit data mode disabled
<6>[ 10.678026] mmc0: 4 bit data mode enabled
<6>[ 10.678046] mmc0: polling status mode disabled
<6>[ 10.678073] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
<6>[ 10.678096] mmc0: Slot eject status = 0
<6>[ 10.678116] mmc0: Power save feature enable = 1
<6>[ 10.678143] mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x24fc0000
<6>[ 10.678171] mmc0: DM cmd busaddr 0x24fc0000, cmdptr busaddr 0x24fd7f40
<6>[ 10.679454] mmc1: mci-version: 0
<6>[ 10.680394] mmc1: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 26,0 dma 8 dmacrcri 7
<6>[ 10.680424] mmc1: 8 bit data mode disabled
<6>[ 10.680444] mmc1: 4 bit data mode enabled
<6>[ 10.680463] mmc1: polling status mode disabled
<6>[ 10.680489] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
<6>[ 10.680513] mmc1: Slot eject status = 1
<6>[ 10.680533] mmc1: Power save feature enable = 1
<6>[ 10.680558] mmc1: DM non-cached buffer at ffd60000, dma_addr 0x24fe0000
<6>[ 10.680586] mmc1: DM cmd busaddr 0x24fe0000, cmdptr busaddr 0x24ff7f40
<6>[ 10.681454] usbcore: registered new interface driver usbhid
<6>[ 10.681478] usbhid: USB HID core driver
<6>[ 10.682448] logger: created 256K log 'log_main'
<6>[ 10.682719] logger: created 256K log 'log_events'
<6>[ 10.682978] logger: created 256K log 'log_radio'
<6>[ 10.683238] logger: created 256K log 'log_system'
<4>[ 10.686191] [Silent Value] : 0
<6>[ 10.688254] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
<3>[ 10.689488] msm_soc: ALSA MSM Mixer Setting
<6>[ 10.690493] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
<6>[ 10.691716] ALSA device list:
<6>[ 10.691739] #0: msm-audio
<6>[ 10.691939] u32 classifier
<6>[ 10.691961] Netfilter messages via NETLINK v0.30.
<6>[ 10.692114] nf_conntrack version 0.5.0 (4436 buckets, 17744 max)
<6>[ 10.692908] ctnetlink v0.93: registering with nfnetlink.
<6>[ 10.693186] xt_time: kernel timezone is -0000
<6>[ 10.693658] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 10.693909] arp_tables: (C) 2002 David S. Miller
<6>[ 10.694044] TCP cubic registered
<6>[ 10.694543] NET: Registered protocol family 10
<6>[ 10.698691] Mobile IPv6
<6>[ 10.698781] IPv6 over IPv4 tunneling driver
<6>[ 10.706946] NET: Registered protocol family 17
<6>[ 10.713519] Bluetooth: RFCOMM TTY layer initialized
<6>[ 10.713561] Bluetooth: RFCOMM socket layer initialized
<6>[ 10.713583] Bluetooth: RFCOMM ver 1.11
<6>[ 10.713604] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 10.713626] Bluetooth: BNEP filters: protocol multicast
<6>[ 10.713651] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 10.715984] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<6>[ 10.719433] clock_late_init() disabled 23 unused clocks
<7>[ 10.726413] msmrtc_tod_proc_result: 08/28/2013 17:38:42 (02)
<6>[ 10.726488] rs30000048 rs30000048.65536: setting system clock to 2013-08-28 17:38:42 UTC (1377711522)
<4>[ 10.732226] multipdp_init:multipdp_rx_noti_regi calling
<4>[ 10.738334] Warning: unable to open an initial console.
<6>[ 10.744063] Freeing init memory: 156K
<3>[ 10.750579] init: /init.rc: 73: invalid option 'enabled'
<4>[ 10.833168] dpram_open(): filp_open() failed~!: -2
<4>[ 10.833206] dpram_thread(): dpram_open failed! retry
<3>[ 10.980763] android_usb: already disabled
<3>[ 10.982531] init: Unable to open persistent property directory /data/property errno: 2
<6>[ 10.991513] adb_open
<6>[ 10.991551] adb_bind_config
<4>[ 11.020048] mmc0: host does not support reading read-only switch. assuming write-enable.
<6>[ 11.025249] mmc0: new high speed SDHC card at address 0007
<6>[ 11.026094] mmcblk0: mmc0:0007 SD16G 14.9 GiB
<6>[ 11.028943] mmcblk0: p1 p2 p3
<6>[ 11.278264] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 11.281809] android_usb gadget: high speed config #1: android
<6>[ 11.282106] android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 11.567101] yaffs: dev is 32505869 name is "mtdblock13" rw
<6>[ 11.567129] yaffs: passed flags ""
<7>[ 11.567156] yaffs: Attempting MTD mount of 31.13,"mtdblock13"
<6>[ 11.567508] msm_onenand_read_oob: ECC/MPU/OP error
<3>[ 11.567546] msm_onenand_read_oob: 1d800000 0 1c failed
<6>[ 11.568139] msm_onenand_read_oob: ECC/MPU/OP error
<3>[ 11.568169] msm_onenand_read_oob: 1d840000 0 1c failed
<6>[ 11.568638] msm_onenand_read_oob: ECC/MPU/OP error
<3>[ 11.568666] msm_onenand_read_oob: 1d880000 0 1c failed
<6>[ 11.569121] msm_onenand_read_oob: ECC/MPU/OP error
<3>[ 11.569149] msm_onenand_read_oob: 1d8c0000 0 1c failed
<6>[ 11.569614] msm_onenand_read_oob: ECC/MPU/OP error
<3>[ 11.569643] msm_onenand_read_oob: 1d900000 0 1c failed
<6>[ 11.570613] msm_onenand_read_oob: ECC/MPU/OP error
<3>[ 11.570643] msm_onenand_read_oob: 1d980000 0 1c failed
<6>[ 11.571129] msm_onenand_read_oob: ECC/MPU/OP error
<3>[ 11.571158] msm_onenand_read_oob: 1d9c0000 0 1c failed
<7>[ 11.619578] yaffs: block 1 is bad
<7>[ 11.620103] yaffs: block 2 is bad
<7>[ 11.620631] yaffs: block 3 is bad
<7>[ 11.621156] yaffs: block 4 is bad
<7>[ 11.621678] yaffs: block 5 is bad
<7>[ 11.622198] yaffs: block 6 is bad
<7>[ 11.622721] yaffs: block 7 is bad
<7>[ 11.623229] yaffs: block 8 is bad
<7>[ 11.623748] yaffs: block 9 is bad
<7>[ 11.624256] yaffs: block 10 is bad
<7>[ 11.624774] yaffs: block 11 is bad
<7>[ 11.625289] yaffs: block 12 is bad
<7>[ 11.625808] yaffs: block 13 is bad
<7>[ 11.626329] yaffs: block 14 is bad
<7>[ 11.626851] yaffs: block 15 is bad
<7>[ 11.627366] yaffs: block 16 is bad
<7>[ 11.627886] yaffs: block 17 is bad
<7>[ 11.628406] yaffs: block 18 is bad
<7>[ 11.628926] yaffs: block 19 is bad
<7>[ 11.629446] yaffs: block 20 is bad
<7>[ 11.629963] yaffs: block 21 is bad
<7>[ 11.630483] yaffs: block 22 is bad
<7>[ 11.630989] yaffs: block 23 is bad
<7>[ 11.631491] yaffs: block 24 is bad
<7>[ 11.632003] yaffs: block 25 is bad
<7>[ 11.632504] yaffs: block 26 is bad
<7>[ 11.633018] yaffs: block 27 is bad
<7>[ 11.633531] yaffs: block 28 is bad
<7>[ 11.634048] yaffs: block 29 is bad
<7>[ 11.634559] yaffs: block 30 is bad
<7>[ 11.635073] yaffs: block 31 is bad
<7>[ 11.635573] yaffs: block 32 is bad
<7>[ 11.636131] yaffs: block 33 is bad
<7>[ 11.636674] yaffs: block 34 is bad
<7>[ 11.637203] yaffs: block 35 is bad
<7>[ 11.637711] yaffs: block 36 is bad
<7>[ 11.638229] yaffs: block 37 is bad
<7>[ 11.638739] yaffs: block 38 is bad
<7>[ 11.639259] yaffs: block 39 is bad
<7>[ 11.639778] yaffs: block 40 is bad
<7>[ 11.640301] yaffs: block 41 is bad
<7>[ 11.640826] yaffs: block 42 is bad
<7>[ 11.641349] yaffs: block 43 is bad
<7>[ 11.641871] yaffs: block 44 is bad
<7>[ 11.642393] yaffs: block 45 is bad
<7>[ 11.642901] yaffs: block 46 is bad
<7>[ 11.643423] yaffs: block 47 is bad
<7>[ 11.643941] yaffs: block 48 is bad
<7>[ 11.644463] yaffs: block 49 is bad
<7>[ 11.644979] yaffs: block 50 is bad
<7>[ 11.645498] yaffs: block 51 is bad
<7>[ 11.646006] yaffs: block 52 is bad
<7>[ 11.646514] yaffs: block 53 is bad
<7>[ 11.647019] yaffs: block 54 is bad
<7>[ 11.647531] yaffs: block 55 is bad
<7>[ 11.648049] yaffs: block 56 is bad
<7>[ 11.648571] yaffs: block 57 is bad
<7>[ 11.649076] yaffs: block 58 is bad
<7>[ 11.649584] yaffs: block 59 is bad
<7>[ 11.650104] yaffs: block 60 is bad
<7>[ 11.650628] yaffs: block 61 is bad
<7>[ 11.651151] yaffs: block 62 is bad
<7>[ 11.651659] yaffs: block 63 is bad
<7>[ 11.652183] yaffs: block 64 is bad
<7>[ 11.652698] yaffs: block 65 is bad
<7>[ 11.653206] yaffs: block 66 is bad
<7>[ 11.653728] yaffs: block 67 is bad
<7>[ 11.654249] yaffs: block 68 is bad
<7>[ 11.654766] yaffs: block 69 is bad
<7>[ 11.655286] yaffs: block 70 is bad
<7>[ 11.655799] yaffs: block 71 is bad
<7>[ 11.656321] yaffs: block 72 is bad
<7>[ 11.656839] yaffs: block 73 is bad
<7>[ 11.657358] yaffs: block 74 is bad
<7>[ 11.657878] yaffs: block 75 is bad
<7>[ 11.658398] yaffs: block 76 is bad
<7>[ 11.658909] yaffs: block 77 is bad
<7>[ 11.659426] yaffs: block 78 is bad
<7>[ 11.659934] yaffs: block 79 is bad
<7>[ 11.660464] yaffs: block 80 is bad
<7>[ 11.660978] yaffs: block 81 is bad
<7>[ 11.661486] yaffs: block 82 is bad
<7>[ 11.662006] yaffs: block 83 is bad
<7>[ 11.662526] yaffs: block 84 is bad
<7>[ 11.663039] yaffs: block 85 is bad
<7>[ 11.663556] yaffs: block 86 is bad
<7>[ 11.664073] yaffs: block 87 is bad
<7>[ 11.664591] yaffs: block 88 is bad
<7>[ 11.665114] yaffs: block 89 is bad
<7>[ 11.665634] yaffs: block 90 is bad
<7>[ 11.666151] yaffs: block 91 is bad
<7>[ 11.666671] yaffs: block 92 is bad
<7>[ 11.667188] yaffs: block 93 is bad
<7>[ 11.667699] yaffs: block 94 is bad
<7>[ 11.668218] yaffs: block 95 is bad
<7>[ 11.668739] yaffs: block 96 is bad
<7>[ 11.669258] yaffs: block 97 is bad
<7>[ 11.669764] yaffs: block 98 is bad
<7>[ 11.670288] yaffs: block 99 is bad
<7>[ 11.670798] yaffs: block 100 is bad
<7>[ 11.671318] yaffs: block 101 is bad
<7>[ 11.671828] yaffs: block 102 is bad
<7>[ 11.672346] yaffs: block 103 is bad
<7>[ 11.672864] yaffs: block 104 is bad
<7>[ 11.673384] yaffs: block 105 is bad
<7>[ 11.673906] yaffs: block 106 is bad
<7>[ 11.674424] yaffs: block 107 is bad
<7>[ 11.674944] yaffs: block 108 is bad
<7>[ 11.675464] yaffs: block 109 is bad
<7>[ 11.675971] yaffs: block 110 is bad
<7>[ 11.676479] yaffs: block 111 is bad
<7>[ 11.676999] yaffs: block 112 is bad
<7>[ 11.677506] yaffs: block 113 is bad
<7>[ 11.678011] yaffs: block 114 is bad
<7>[ 11.678531] yaffs: block 115 is bad
<7>[ 11.679051] yaffs: block 116 is bad
<7>[ 11.679328] yaffs: yaffs_read_super: is_checkpointed 0
<7>[ 11.811298] yaffs: yaffs tragedy: no more erased blocks
<7>[ 11.811378] yaffs: yaffs tragedy: no more erased blocks
<4>[ 11.841409] pdp_activate(): ttyCSD(id: 1) serial device is created.
<4>[ 11.841846] pdp_activate(): ttyEFS(id: 8) serial device is created.
<4>[ 11.842228] pdp_activate(): ttyGPS(id: 5) serial device is created.
<4>[ 11.842618] pdp_activate(): ttyXTRA(id: 6) serial device is created.
<4>[ 11.843003] pdp_activate(): ttySMD(id: 25) serial device is created.
<7>[ 11.944578] yaffs: yaffs tragedy: no more erased blocks
<7>[ 11.944654] yaffs: yaffs tragedy: no more erased blocks
<6>[ 11.990303]
<6>[ 11.990321] Charger Type: STD DOWNSTREAM PORT
<7>[ 12.060356] yaffs: yaffs tragedy: no more erased blocks
<7>[ 12.060428] yaffs: yaffs tragedy: no more erased blocks
<7>[ 12.145031] yaffs: yaffs tragedy: no more erased blocks
<7>[ 12.145171] yaffs: yaffs tragedy: no more erased blocks
<4>[ 14.700989] adbd (95): /proc/95/oom_adj is deprecated, please use /proc/95/oom_score_adj instead.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment