Home Monitor Garage Door Electric Imp Device

GarageDoor-Agent

const ODATAHQ_URL = "https://query.odatahq.com/v3/{accountkeyhere}/homemonitor/garagedoor?api-key={apikeyhere}";

// Print light reading trigger URL
server.log("Sensor Agent URL: " + http.agenturl());
 
// Define funtions
function requestHandler(request, response) 
{
  // Handle an incoming web request for a reading
  try 
  {
    response.send(200, "OK");
  } 
  catch (ex) 
  {
    response.send(500, "Internal Server Error: " + ex);
  }
}
 
// Register the HTTP handler
http.onrequest(requestHandler);

function processResponse(resp) {
  server.log(resp);
}

// Make API Call
function postData(value) {
  local key = value[0];
  local d = date();
  local datestring = format("%04d-%02d-%02dT%02d:%02d:%02d", d.year, d.month+1, d.day, d.hour, d.min, d.sec);
  local body = http.jsonencode({ DocumentID = datestring, Status = key, StatusDateTime = datestring });
  local headers = { "Content-Type": "application/json" };
  local request = http.post(ODATAHQ_URL, headers, body);
  request.sendasync(processResponse);
  server.log(body);
  server.log(datestring);
}

device.on("ping", function(value) {
   postData(value);
}); 

GarageDoor-Device

/*****************************************************************
Electric Imp Breakout (Device)
Post data to an ODataHQ OData service using
an Electric Imp https://www.sparkfun.com/products/11400
Eric Jones @erjjones
Original Creation Date: August 27, 2014

Description

Hardware Hookup:
    * Pin 2 - Active-low momentary button (pulled high internally)

Distributed as-is; no warranty is given.
*****************************************************************/

/////////////////////////
// Garage Door Monitor //
/////////////////////////


/////////////////////
// Pin Definitions //
/////////////////////
buttonPin <- hardware.pin2;

// This name will be sent to the stream each update:
local impName = "Imp%20" + imp.getmacaddress();

////////////////////////////
// Button Press Interrupt //
////////////////////////////
// This function will be called each time the button (connected to pin 2) is
// pressed or released.
function sendData()
{
    // Only do this if the pin is low (pressed)
    if (buttonPin.read() == 0)
    {
        // garage door open
        server.log("Garage Door Open");
        
        // talk to agent
        agent.send("ping", ["Open"]);
    }
    
    if (buttonPin.read() == 1)
    {
       // garage door closed
        server.log("Garage Door Closed");
        
        // talk to agent
        agent.send("ping", ["Closed"]);
    }
}

///////////////
// Pin Setup //
///////////////
buttonPin.configure(DIGITAL_IN_PULLUP, sendData); // Button -- input w/ pull-up

server.log("Garage Door Monitor has started"); // Hello, monitoring.