ryansimms

Deploying to Elastic Beanstalk via CircleCi 2.0

I got to here after spending hours trying to deploy to an Elastic Beanstalk instance via CircleCi 2.0 so I thought I'd write up what worked for me to hopefully help others. Shout out to RobertoSchneiders who's steps for getting it to work with CircleCi 1.0 were my starting point.

For the record, I'm not the most server-savvy of developers so there may be a better way of doing this.

Setup a user on AWS IAM to use for deployments

• Add user here

ernsheong

Access macOS localhost from IE or Edge within Parallels Desktop

This issue is so infuriating that I'm going to take some time to write about it.

1. MOST IMPORTANT. Your local development server must be bound to IP address 0.0.0.0. Some do this by default, but many don't. You need to make sure that you run your local server with correct IP bindings. You may need to provide additional flags to your serve commands e.g. polymer serve --hostname domain.local, hugo serve --bind 0.0.0.0. If you use a named domain like domain.local, it has to be defined in /etc/hosts and pointing at 0.0.0.0.

2. My Parallels setting is using Shared Network, nothing special there.

3. Open macOS Terminal and type ifconfig. Look for the value under vnic0 > inet. It is typically 10.211.55.2.

johanneswuerbach

---
language: objective-c
before_script:
- ./scripts/travis/add-key.sh
after_script:
- ./scripts/travis/remove-key.sh
after_success:
- ./scripts/travis/testflight.sh
env:
  global:

ericdagenais

DEV_PROVISIONING_UUID = 'XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX'
DEV_SIGN = 'Your Signing Name'

ADHOC_PROVISIONING_UUID = 'XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX'
ADHOC_SIGN = 'Your Signing Name'

DEV_APP_DEVICE = 'ipad' # or iphone, universal

IPHONE_SDK_VERSION = '5.0'

Jaybles

//
//  UIDeviceHardware.h
//
//  Used to determine EXACT version of device software is running on.

#import <Foundation/Foundation.h>

@interface UIDeviceHardware : NSObject 

- (NSString *) platform;