Bloscpack new header

bloscpack_new_header.rst

RFC for the new Bloscpack Header

Author

Valentin Haenel

Contact

valentin.haenel@gmx.de

The following 32 bit header is proposed for bloscpack as of version 0.2.0. The design goals of the new header format are to contain as much information as possible to achieve interesting things in the future and to be as general as possible such that the new persistence layer of CArray is compatible with bloscpack.

The following ascii representation shows the layout of the header:

|-0-|-1-|-2-|-3-|-4-|-5-|-6-|-7-|-8-|-9-|-A-|-B-|-C-|-D-|-E-|-F-|
| b   l   p   k | ^ | ^ | ^ | ^ |   chunk-size  |  last-chunk   |
                  |   |   |   |
      version ----+   |   |   |
      options --------+   |   |
     checksum ------------+   |
     typesize ----------------+

|-0-|-1-|-2-|-3-|-4-|-5-|-6-|-7-|-8-|-9-|-A-|-B-|-C-|-D-|-E-|-F-|
|            nchunks            |            RESERVED           |

The first 4 bytes are the magic string blpk. Then there are 4 bytes, the first three are described below and the last one is reserved. This is followed by 4 bytes for the chunk-size, another 4 bytes for the last-chunk-size and 8 bytes for the number of chunks. The last 8 bytes are reserved for use in future versions of the format.

Description of the header entries

All entries are little-endian.

version

(uint8) format version of the bloscpack header, to ensure exceptions in case of forward incompatibilities.

options

(bitfield) A bitfield which allows for setting certain options in this file.

bit 0 (0x01)

If the offsets to the chunks are present in this file.

checksum

(uint8) The checksum used. The following checksums, available in the python standard library should be supported and the checksum should be placed after the chunk.

0

no checksum

1

zlib.adler32

2

zlib.crc32

3

hashlib.md5

4

hashlib.sha1

5

hashlib.sha224

6

hashlib.sha256

7

hashlib.sha384

8

hashlib.sha512

typesize

(uint8) The typesize of the data in the chunks. Currently, assume that the typesize is uniform. The space allocated is the same as in the Blosc header.

chunk-size

(int32) Denotes the chunk-size. Since the maximum buffer size of Blosc is 2GB having a signed 32 bit int is enough (2GB = 2**31 bytes). The special value of -1 denotes that the chunk-size is unknown or possibly non-uniform.

last-chunk

(int32) Denotes the size of the last chunk. As with the chunk-size an int32 is enough. Again, -1 denotes that this value is unknown.

nchunks

(int64) The total number of chunks used in the file. Given a chunk-size of one byte, the total number of chunks is 2**63. This amounts to a maximum file-size of 8EB (8EB = 2*63 bytes) which should be enough for the next couple of years. Again, -1 denotes that the number of chunks was not known at the time of creation.

The overall file-size can be computed as chunk-size * (nchunks - 1) + last-chunk-size.

Description of the offsets entries --------------------------------

Offsets of the chunks into the file are to be used for accelerated seeking. The offsets (if activated) follow the header. Each offset is a 64 bit signed little-endian integer (int64). A value of -1 denotes an unknown offset. Each offset denotes the exact position of the chunk in the file such that seeking to the offset, will position the file pointer such that, reading the next 16 bytes gives the blosc header, which is at the start of the desired chunk. The layout of the file is then:

|-bloscpack-header-|-offset-|-offset-|...|-chunk-|-chunk-|...|