Created
February 25, 2011 00:27
-
-
Save esden/843193 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/bash | |
| # Written by Uwe Hermann <uwe@hermann-uwe.de>, released as public domain. | |
| # Modified by Piotr Esden-Tempski <piotr@esden.net>, released as public domain. | |
| # | |
| # Requirements (example is for Debian, replace package names as needed): | |
| # | |
| # apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \ | |
| # libmpc-dev autoconf texinfo build-essential | |
| # | |
| # Or on Ubuntu Maverick give `apt-get build-dep gcc-4.5` a try. | |
| # | |
| # Stop if any command fails | |
| set -e | |
| ############################################################################## | |
| # Default settings section | |
| # You probably want to customize those | |
| # You can also pass them as parameters to the script | |
| ############################################################################## | |
| TARGET=arm-none-eabi # Or: TARGET=arm-elf | |
| DESTDIR="" | |
| PREFIX=${HOME}/sat # Install location of your final toolchain | |
| DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed | |
| # Set to 'sudo' if you need superuser privileges while installing | |
| SUDO= | |
| # Set to 1 to be quieter while running | |
| QUIET=0 | |
| # Set to 1 to use linaro gcc instead of the FSF gcc | |
| USE_LINARO=1 | |
| # Set to 1 to enable building of OpenOCD | |
| OOCD_EN=1 | |
| # Set to 1 to build libstm32 provided by ST | |
| LIBSTM32_EN=0 | |
| # Set to 1 to build libopenstm32 an open source library for stm32 | |
| LIBOPENSTM32_EN=1 | |
| # Make the gcc default to Cortex-M3 | |
| DEFAULT_TO_CORTEX_M3=0 | |
| ############################################################################## | |
| # Parsing command line parameters | |
| ############################################################################## | |
| while [ $# -gt 0 ]; do | |
| case $1 in | |
| TARGET=*) | |
| TARGET=$(echo $1 | sed 's,^TARGET=,,') | |
| ;; | |
| DESTDIR=*) | |
| DESTDIR=$(echo $1 | sed 's,^DESTDIR=,,') | |
| ;; | |
| PREFIX=*) | |
| PREFIX=$(echo $1 | sed 's,^PREFIX=,,') | |
| ;; | |
| DARWIN_OPT_PATH=*) | |
| DARWIN_OPT_PATH=$(echo $1 | sed 's,^DARWIN_OPT_PATH=,,') | |
| ;; | |
| SUDO=*) | |
| SUDO=$(echo $1 | sed 's,^SUDO=,,') | |
| ;; | |
| QUIET=*) | |
| QUIET=$(echo $1 | sed 's,^QUIET=,,') | |
| ;; | |
| USE_LINARO=*) | |
| USE_LINARO=$(echo $1 | sed 's,^USE_LINARO=,,') | |
| ;; | |
| OOCD_EN=*) | |
| OOCD_EN=$(echo $1 | sed 's,^OOCD_EN=,,') | |
| ;; | |
| LIBSTM32_EN=*) | |
| LIBSTM32_EN=$(echo $1 | sed 's,^LIBSTM32_EN=,,') | |
| ;; | |
| LIBOPENSTM32_EN=*) | |
| LIBOPENSTM32_EN=$(echo $1 | sed 's,^LIBOPENSTM32_EN=,,') | |
| ;; | |
| DEFAULT_TO_CORTEX_M3=*) | |
| DEFAULT_TO_CORTEX_M3=$(echo $1 | sed 's,^DEFAULT_TO_CORTEX_M3=,,') | |
| ;; | |
| *) | |
| echo "Unknown parameter: $1" | |
| exit 1 | |
| ;; | |
| esac | |
| shift # shifting parameter list to access the next one | |
| done | |
| echo "Settings used for this build are:" | |
| echo "TARGET=$TARGET" | |
| echo "DESTDIR=$DESTDIR" | |
| echo "PREFIX=$PREFIX" | |
| echo "DARWIN_OPT_PATH=$DARWIN_OPT_PATH" | |
| echo "SUDO=$SUDO" | |
| echo "QUIET=$QUIET" | |
| echo "USE_LINARO=$USE_LINARO" | |
| echo "OOCD_EN=$OOCD_EN" | |
| echo "LIBSTM32_EN=$LIBSTM32_EN" | |
| echo "LIBOPENSTM32_EN=$LIBOPENSTM32_EN" | |
| echo "DEFAULT_TO_CORTEX_M3=$DEFAULT_TO_CORTEX_M3" | |
| ############################################################################## | |
| # Version and download url settings section | |
| ############################################################################## | |
| if [ ${USE_LINARO} == 0 ] ; then | |
| # For FSF GCC: | |
| GCCVERSION=4.5.2 | |
| GCC=gcc-${GCCVERSION} | |
| GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz | |
| else | |
| # For the Linaro GCC: | |
| GCCRELEASE=4.5-2011.02-0 | |
| GCCVERSION=4.5-2011.02-0 | |
| GCC=gcc-linaro-${GCCVERSION} | |
| GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCRELEASE}/+download/${GCC}.tar.bz2 | |
| fi | |
| BINUTILS=binutils-2.21 | |
| NEWLIB=newlib-1.19.0 | |
| GDB=gdb-7.2 | |
| OOCD=master | |
| LIBCMSIS=v1.10-3 | |
| LIBSTM32=v3.0.0-2 | |
| LIBSTM32USB=v3.0.1-1 | |
| LIBOPENSTM32=master | |
| ############################################################################## | |
| # Flags section | |
| ############################################################################## | |
| if which getconf > /dev/null; then | |
| CPUS=$(getconf _NPROCESSORS_ONLN) | |
| else | |
| CPUS=1 | |
| fi | |
| PARALLEL=-j$((CPUS + 1)) | |
| echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag" | |
| GDBFLAGS= | |
| BINUTILFLAGS= | |
| if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then | |
| GCCFLAGS= | |
| else | |
| # To default to the Cortex-M3: | |
| GCCFLAGS="--with-arch=armv7-m --with-mode=thumb --with-float=soft" | |
| fi | |
| # Pull in the local configuration, if any | |
| if [ -f local.sh ]; then | |
| . ./local.sh | |
| fi | |
| MAKEFLAGS=${PARALLEL} | |
| TARFLAGS=v | |
| if [ ${QUIET} != 0 ]; then | |
| TARFLAGS= | |
| MAKEFLAGS="${MAKEFLAGS} -s" | |
| fi | |
| export PATH="${DESTDIR}/${PREFIX}/bin:${PATH}" | |
| SUMMON_DIR=$(pwd) | |
| SOURCES=${SUMMON_DIR}/sources | |
| STAMPS=${SUMMON_DIR}/stamps | |
| ############################################################################## | |
| # Tool section | |
| ############################################################################## | |
| TAR=tar | |
| ############################################################################## | |
| # OS and Tooldetection section | |
| # Detects which tools and flags to use | |
| ############################################################################## | |
| case "$(uname)" in | |
| Linux) | |
| echo "Found Linux OS." | |
| ;; | |
| Darwin) | |
| echo "Found Darwin OS." | |
| GCCFLAGS="${GCCFLAGS} \ | |
| --with-gmp=${DARWIN_OPT_PATH} \ | |
| --with-mpfr=${DARWIN_OPT_PATH} \ | |
| --with-mpc=${DARWIN_OPT_PATH} \ | |
| --with-libiconv-prefix=${DARWIN_OPT_PATH}" | |
| OOCD_CFLAGS="-I/opt/mine/include -I/opt/local/include" | |
| OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib" | |
| ;; | |
| CYGWIN*) | |
| echo "Found CygWin that means Windows most likely." | |
| ;; | |
| *) | |
| echo "Found unknown OS. Aborting!" | |
| exit 1 | |
| ;; | |
| esac | |
| ############################################################################## | |
| # Building section | |
| # You probably don't have to touch anything after this | |
| ############################################################################## | |
| # Fetch a versioned file from a URL | |
| function fetch { | |
| if [ ! -e ${STAMPS}/$1.fetch ]; then | |
| log "Downloading $1 sources..." | |
| wget -c --no-passive-ftp $2 | |
| touch ${STAMPS}/$1.fetch | |
| fi | |
| } | |
| # Log a message out to the console | |
| function log { | |
| echo "******************************************************************" | |
| echo "* $*" | |
| echo "******************************************************************" | |
| } | |
| # Unpack an archive | |
| function unpack { | |
| log Unpacking $* | |
| # Use 'auto' mode decompression. Replace with a switch if tar doesn't support -a | |
| ARCHIVE=$(ls ${SOURCES}/$1.tar.*) | |
| case ${ARCHIVE} in | |
| *.bz2) | |
| echo "archive type bz2" | |
| TYPE=j | |
| ;; | |
| *.gz) | |
| echo "archive type gz" | |
| TYPE=z | |
| ;; | |
| *) | |
| echo "Unknown archive type of $1" | |
| echo ${ARCHIVE} | |
| exit 1 | |
| ;; | |
| esac | |
| ${TAR} xf${TYPE}${TARFLAGS} ${SOURCES}/$1.tar.* | |
| } | |
| # Install a build | |
| function install { | |
| log $1 | |
| ${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8 | |
| } | |
| mkdir -p ${STAMPS} ${SOURCES} | |
| cd ${SOURCES} | |
| fetch ${BINUTILS} http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2 | |
| fetch ${GCC} ${GCCURL} | |
| fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz | |
| fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2 | |
| if [ ${OOCD_EN} != 0 ]; then | |
| if [ ! -e openocd-${OOCD}.tar.bz2 ]; then | |
| log "Cloning OpenOCD sources..." | |
| git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD} | |
| cd openocd-${OOCD} | |
| ./bootstrap | |
| cd .. | |
| tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD} | |
| #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \ | |
| # bzip2 --stdout > ../openocd-${OOCD}.tar.bz2 | |
| rm -rf openocd-${OOCD} | |
| fi | |
| fi | |
| if [ ${LIBSTM32_EN} != 0 ]; then | |
| if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then | |
| log "Cloning libcmsis sources..." | |
| git clone git://git.open-bldc.org/libcmsis.git | |
| cd libcmsis | |
| git archive --format=tar --prefix=libcmsis-${LIBCMSIS}/ ${LIBCMSIS} | \ | |
| bzip2 --stdout > ../libcmsis-${LIBCMSIS}.tar.bz2 | |
| cd .. | |
| rm -rf libcmsis | |
| fi | |
| if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then | |
| log "Cloning libstm32 sources..." | |
| git clone git://git.open-bldc.org/libstm32.git | |
| cd libstm32 | |
| git archive --format=tar --prefix=libstm32-${LIBSTM32}/ ${LIBSTM32} | \ | |
| bzip2 --stdout > ../libstm32-${LIBSTM32}.tar.bz2 | |
| cd .. | |
| rm -rf libstm32 | |
| fi | |
| if [ ! -e libstm32usb-${LIBSTM32USB}.tar.bz2 ]; then | |
| log "Cloning libstm32usb sources..." | |
| git clone git://git.open-bldc.org/libstm32usb.git | |
| cd libstm32usb | |
| git archive --format=tar --prefix=libstm32usb-${LIBSTM32USB}/ ${LIBSTM32USB} | \ | |
| bzip2 --stdout > ../libstm32usb-${LIBSTM32USB}.tar.bz2 | |
| cd .. | |
| rm -rf libstm32usb | |
| fi | |
| fi | |
| if [ ${LIBOPENSTM32_EN} != 0 ]; then | |
| if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then | |
| log "Cloning libopenstm32 sources..." | |
| git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32 | |
| cd libopenstm32 | |
| git archive --format=tar --prefix=libopenstm32-${LIBOPENSTM32}/ ${LIBOPENSTM32} | \ | |
| bzip2 --stdout > ../libopenstm32-${LIBOPENSTM32}.tar.bz2 | |
| cd .. | |
| rm -rf libopenstm32 | |
| fi | |
| fi | |
| cd ${SUMMON_DIR} | |
| if [ ! -e build ]; then | |
| mkdir build | |
| fi | |
| if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then | |
| unpack ${BINUTILS} | |
| cd build | |
| log "Configuring ${BINUTILS}" | |
| ../${BINUTILS}/configure --target=${TARGET} \ | |
| --prefix=${PREFIX} \ | |
| --enable-interwork \ | |
| --enable-multilib \ | |
| --with-gnu-as \ | |
| --with-gnu-ld \ | |
| --disable-nls \ | |
| --disable-werror \ | |
| ${BINUTILFLAGS} | |
| log "Building ${BINUTILS}" | |
| make ${MAKEFLAGS} | |
| install ${BINUTILS} DESTDIR=${DESTDIR} install | |
| cd .. | |
| log "Cleaning up ${BINUTILS}" | |
| touch ${STAMPS}/${BINUTILS}.build | |
| rm -rf build/* ${BINUTILS} | |
| fi | |
| if [ ! -e ${STAMPS}/${GCC}-${NEWLIB}.build ]; then | |
| unpack ${GCC} | |
| unpack ${NEWLIB} | |
| log "Adding newlib symlink to gcc" | |
| ln -f -s `pwd`/${NEWLIB}/newlib ${GCC} | |
| log "Adding libgloss symlink to gcc" | |
| ln -f -s `pwd`/${NEWLIB}/libgloss ${GCC} | |
| if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then | |
| log "Patching gcc to add multilib support" | |
| cd ${GCC} | |
| patch -p0 -i ../patches/patch-gcc-config-arm-t-arm-elf.diff | |
| cd .. | |
| fi | |
| cd build | |
| log "Configuring ${GCC} and ${NEWLIB}" | |
| ../${GCC}/configure --target=${TARGET} \ | |
| --prefix=${PREFIX} \ | |
| --enable-interwork \ | |
| --enable-multilib \ | |
| --enable-languages="c,c++" \ | |
| --with-newlib \ | |
| --with-gnu-as \ | |
| --with-gnu-ld \ | |
| --disable-nls \ | |
| --disable-shared \ | |
| --disable-threads \ | |
| --with-headers=newlib/libc/include \ | |
| --disable-libssp \ | |
| --disable-libstdcxx-pch \ | |
| --disable-libmudflap \ | |
| --disable-libgomp \ | |
| --disable-werror \ | |
| --with-system-zlib \ | |
| --disable-newlib-supplied-syscalls \ | |
| ${GCCFLAGS} | |
| log "Building ${GCC} and ${NEWLIB}" | |
| make ${MAKEFLAGS} | |
| install ${GCC} DESTDIR=${DESTDIR} install | |
| cd .. | |
| log "Cleaning up ${GCC} and ${NEWLIB}" | |
| touch ${STAMPS}/${GCC}-${NEWLIB}.build | |
| rm -rf build/* ${GCC} ${NEWLIB} | |
| fi | |
| if [ ! -e ${STAMPS}/${GDB}.build ]; then | |
| unpack ${GDB} | |
| cd build | |
| log "Configuring ${GDB}" | |
| ../${GDB}/configure --target=${TARGET} \ | |
| --prefix=${PREFIX} \ | |
| --enable-interwork \ | |
| --enable-multilib \ | |
| --disable-werror \ | |
| ${GDBFLAGS} | |
| log "Building ${GDB}" | |
| make ${MAKEFLAGS} | |
| install ${GDB} DESTDIR=${DESTDIR} install | |
| cd .. | |
| log "Cleaning up ${GDB}" | |
| touch ${STAMPS}/${GDB}.build | |
| rm -rf build/* ${GDB} | |
| fi | |
| if [ ${OOCD_EN} != 0 ]; then | |
| if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then | |
| unpack openocd-${OOCD} | |
| cd build | |
| log "Configuring openocd-${OOCD}" | |
| CFLAGS="${CFLAGS} ${OOCD_CFLAGS}" \ | |
| LDFLAGS="${LDFLAGS} ${OOCD_LDFLAGS}" \ | |
| ../openocd-${OOCD}/configure --enable-maintainer-mode \ | |
| --prefix=${DESTDIR}/${PREFIX} \ | |
| --enable-dummy \ | |
| --enable-ft2232_libftdi \ | |
| --enable-usb_blaster_libftdi \ | |
| --enable-ep93xx \ | |
| --enable-at91rm9200 \ | |
| --enable-presto_libftdi \ | |
| --enable-usbprog \ | |
| --enable-jlink \ | |
| --enable-vsllink \ | |
| --enable-rlink \ | |
| --enable-arm-jtag-ew | |
| log "Building openocd-${OOCD}" | |
| make ${MAKEFLAGS} | |
| install openocd-${OOCD} install | |
| cd .. | |
| log "Cleaning up openocd-${OOCD}" | |
| touch ${STAMPS}/openocd-${OOCD}.build | |
| rm -rf build/* ${OOCD} | |
| fi | |
| fi | |
| if [ ${LIBSTM32_EN} != 0 ]; then | |
| if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then | |
| unpack libcmsis-${LIBCMSIS} | |
| cd libcmsis-${LIBCMSIS} | |
| log "Building libcmsis-${LIBCMSIS}" | |
| make arch_prefix=${TARGET} prefix=${DESTDIR}/${PREFIX} | |
| install libcmsis-${LIBCMSIS} arch_prefix=${TARGET} prefix=${DESTDIR}/${PREFIX} install | |
| cd .. | |
| log "Cleaning up libcmsis-${LIBCMSIS}" | |
| touch ${STAMPS}/libcmsis-${LIBCMSIS}.build | |
| rm -rf libcmsis-${LIBCMSIS} | |
| fi | |
| if [ ! -e ${STAMPS}/libstm32-${LIBSTM32}.build ]; then | |
| unpack libstm32-${LIBSTM32} | |
| cd libstm32-${LIBSTM32} | |
| log "Building libstm32-${LIBSTM32}" | |
| make arch_prefix=${TARGET} prefix=${DESTDIR}/${PREFIX} | |
| install libstm32-${LIBSTM32} arch_prefix=${TARGET} prefix=${DESTDIR}/${PREFIX} install | |
| cd .. | |
| log "Cleaning up libstm32-${LIBSTM32}" | |
| touch ${STAMPS}/libstm32-${LIBSTM32}.build | |
| rm -rf libstm32-${LIBSTM32} | |
| fi | |
| if [ ! -e ${STAMPS}/libstm32usb-${LIBSTM32USB}.build ]; then | |
| unpack libstm32usb-${LIBSTM32USB} | |
| cd libstm32usb-${LIBSTM32USB} | |
| log "Building libstm32usb-${LIBSTM32USB}" | |
| make arch_prefix=${TARGET} prefix=${DESTDIR}/${PREFIX} | |
| install libstm32usb-${LIBSTM32USB} arch_prefix=${TARGET} prefix=${DESTDIR}/${PREFIX} install | |
| cd .. | |
| log "Cleaning up libstm32usb-${LIBSTM32USB}" | |
| touch ${STAMPS}/libstm32usb-${LIBSTM32USB}.build | |
| rm -rf libstm32usb-${LIBSTM32USB} | |
| fi | |
| fi | |
| if [ $LIBOPENSTM32_EN != 0 ]; then | |
| if [ ! -e ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build ]; then | |
| unpack libopenstm32-${LIBOPENSTM32} | |
| cd libopenstm32-${LIBOPENSTM32} | |
| log "Building libopenstm32-${LIBOPENSTM32}" | |
| make PREFIX=${TARGET} DESTDIR=${DESTDIR}/${PREFIX} | |
| install libopenstm32-${LIBOPENSTM32} PREFIX=${TARGET} DESTDIR=${DESTDIR}/${PREFIX} install | |
| cd .. | |
| log "Cleaning up libopenstm32-${LIBOPENSTM32}" | |
| touch ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build | |
| rm -rf libopenstm32-${LIBOPENSTM32} | |
| fi | |
| fi |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment