Just the ftdi programming template for icebreaker.

icebreaker-ftdi-public-template.conf

# The Vendor ID and Product ID seem to identify a particular chipset
# to target. I used the libftdi utilities and OS X USB Prober app to
# poke around and figure out what numbers to use.

vendor_id=0x403
product_id=0x6010

# The rest of the fields are settings which can be written to the
# FT2xx with the --flash-eeprom option.

# Max. power consumption: value * 2 mA. Use 0 if self_powered = true.
max_power=500

###########
# Strings #
###########
manufacturer="1BitSquared"
product="iCEBreaker V1.0e"

###########
# Options #
###########
self_powered=false  # Turn this off for bus powered
remote_wakeup=false # Turn this on for remote wakeup feature
use_serial=true     # Use the serial number string

# Normally out don't have to change one of these flags
in_is_isochronous=false     # In Endpoint is Isochronous
out_is_isochronous=false    # Out Endpoint is Isochronous
suspend_pull_downs=false    # Enable suspend pull downs for lower power
change_usb_version=false    # Change USB Version
usb_version=0x0200          # Only used when change_usb_version is enabled

cha_vcp=false
cha_type=FIFO
chb_type=UART

eeprom_type=0x46

########
# Misc #
########

# This is the relative filename that EEPROM contents will either be 
# read from or written to, depending on whether ftdi_eeprom is run
# with the --read-eeprom or --flash-eeprom option.
filename="eeprom.bin"

serial="ibXXXXXX"