kossel pro prusaslicer intro gcode

kosselpro_prusaslicer_start.gcode

; Start heating up the base first (takes logest)
M140 S[first_layer_bed_temperature]

; Set the standby and active temperatures for "both" tools
G10 P0 R[temperature_0] S[temperature_0]
G10 P1 R[temperature_1] S[temperature_1]

; Home to top 3 endstops
G28

; Allow movement outside machine limits
M564 S0

; move to starting position to heat up
G1 X122.5 Y0 Z3 F6000.0

; Wait for the temp to be good for the first layer
M109 S[first_layer_temperature] ; extruder temp
M190 S[first_layer_bed_temperature] ; bed temp

; Draw an arc along the outer edge of the print bed.
G92 E0.0
G1 Z0.2 F6000.0 ; drop down to 0.2mm
G2 X106.738 Y-60.11 I-122.5 J0 E9.0 F1000.0        ; intro line
G2 X81.684 Y-91.291 I-106.738 J60.11 E12.5 F1000.0 ; intro line
G92 E0.0

; Enforce machine limits
M564 S1

M83 ; extruder relative mode

; Just in case someone mucked with the temperature above, make sure it’s set properly
M104 S[first_layer_temperature]     ; set extruder temp
M140 S[first_layer_bed_temperature] ; set bed temp