Last active
October 23, 2018 01:45
-
-
Save ezmobius/4696840 to your computer and use it in GitHub Desktop.
This is my slic3r 0.9.8 config.ini for the Aluminatus TrinityOne 1.0 printer for hollow vessels in either ABS or PLA, this is a bit higher resolution at 0.15mm layers. I do not like to put temperature for the bed or hot end in my slic3r config as it creates that annoying pause when you hit print while it waits for the temp to be right. I usually…
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # Ezra's default starter Aluminatus slic3r config for hollow vessells | |
| acceleration = 0 | |
| bed_size = 300,300 | |
| bed_temperature = 0 | |
| bridge_fan_speed = 100 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 70 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| cooling = 1 | |
| disable_fan_first_layers = 1 | |
| duplicate = 1 | |
| duplicate_distance = 6 | |
| duplicate_grid = 1,1 | |
| end_gcode = G1 X0 Y0\nM104 S0 ; turn off temperature\nM140 S0; turn off heated bed\nM84; disable motors | |
| external_perimeter_speed = 70% | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extruder_offset = 0x0 | |
| extrusion_axis = E | |
| extrusion_multiplier = 1.0 | |
| extrusion_width = 0 | |
| fan_always_on = | |
| fan_below_layer_time = 30 | |
| filament_diameter = 2.95 | |
| fill_angle = 35 | |
| fill_density = 0.0 | |
| fill_pattern = rectilinear | |
| first_layer_bed_temperature = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 110% | |
| first_layer_speed = 30% | |
| first_layer_temperature = 0 | |
| g0 = 0 | |
| gcode_arcs = 0 | |
| gcode_comments = 0 | |
| gcode_flavor = reprap | |
| infill_acceleration = 50 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_speed = 100 | |
| layer_gcode = | |
| layer_height = 0.15 | |
| max_fan_speed = 100 | |
| min_fan_speed = 35 | |
| min_print_speed = 30 | |
| notes = | |
| nozzle_diameter = 0.4 | |
| output_filename_format = [input_filename_base].gcode | |
| perimeter_acceleration = 25 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 70 | |
| perimeters = 2 | |
| post_process = | |
| print_center = 150,150 | |
| randomize_start = 0 | |
| retract_before_travel = 2 | |
| retract_length = 0.85 | |
| retract_lift = 0.0 | |
| retract_restart_extra = 0 | |
| retract_speed = 45 | |
| rotate = 0 | |
| scale = 1 | |
| skirt_distance = 6 | |
| skirt_height = 1 | |
| skirts = 1 | |
| slowdown_below_layer_time = 30 | |
| small_perimeter_speed = 50 | |
| solid_fill_pattern = rectilinear | |
| solid_infill_speed = 90 | |
| solid_layers = 3 | |
| start_gcode = | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2.5 | |
| support_material_threshold = 45 | |
| temperature = 0 | |
| threads = 4 | |
| top_solid_infill_speed = 70 | |
| travel_speed = 110 | |
| use_relative_e_distances = 0 | |
| z_offset = 0 |
Reloaded corrected version, and Slic3r can load it now. Now if only the files had meaningful names instead of gisthub.txt...
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Useless, as the params are provided in alphabetic order, and the places where they are needed in Slic3r are spread at random over 13 different settings panels.