Skip to content

Instantly share code, notes, and snippets.

@PabloMansanet
Created November 29, 2018 20:51
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save PabloMansanet/f24a5af11f5f2f3372bb07de5e00df2c to your computer and use it in GitHub Desktop.
Save PabloMansanet/f24a5af11f5f2f3372bb07de5e00df2c to your computer and use it in GitHub Desktop.
[Nov29 21:07] Linux version 4.19.4-arch1-1-ARCH (builduser@heftig-22537) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Fri Nov 23 09:06:58 UTC 2018
[ +0.000000] Command line: BOOT_IMAGE=(loop)/arch/boot/x86_64/vmlinuz module_blacklist=intel_lpss_pci img_dev=/dev/disk/by-uuid/df54812e-95b6-40ba-a398-e5d94d84d3fd img_loop=/boot/isos/halberd-2018.11.28-x86_64.iso earlymodules=loop
[ +0.000000] KERNEL supported cpus:
[ +0.000000] Intel GenuineIntel
[ +0.000000] AMD AuthenticAMD
[ +0.000000] Centaur CentaurHauls
[ +0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ +0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ +0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ +0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ +0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ +0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ +0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ +0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ +0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ +0.000000] BIOS-provided physical RAM map:
[ +0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ +0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ +0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000004b237fff] usable
[ +0.000000] BIOS-e820: [mem 0x000000004b238000-0x000000004caa2fff] reserved
[ +0.000000] BIOS-e820: [mem 0x000000004caa3000-0x000000004cb29fff] ACPI data
[ +0.000000] BIOS-e820: [mem 0x000000004cb2a000-0x000000004cbdefff] ACPI NVS
[ +0.000000] BIOS-e820: [mem 0x000000004cbdf000-0x000000004fc35fff] reserved
[ +0.000000] BIOS-e820: [mem 0x000000004fc36000-0x000000004fd0efff] type 20
[ +0.000000] BIOS-e820: [mem 0x000000004fd0f000-0x000000004fd0ffff] usable
[ +0.000000] BIOS-e820: [mem 0x000000004fd10000-0x000000005cffffff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ +0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000029effffff] usable
[ +0.000000] NX (Execute Disable) protection: active
[ +0.000000] efi: EFI v2.70 by American Megatrends
[ +0.000000] efi: ACPI 2.0=0x4cac6000 ACPI=0x4cac6000 SMBIOS=0x4fa8c000 SMBIOS 3.0=0x4fa8b000 MEMATTR=0x49bcd018 ESRT=0x49bd2f98
[ +0.000000] SMBIOS 3.1.1 present.
[ +0.000000] DMI: HP HP Spectre x360 Convertible 13-ap0xxx/8514, BIOS F.06 10/04/2018
[ +0.000000] tsc: Detected 2000.000 MHz processor
[ +0.000000] tsc: Detected 1992.000 MHz TSC
[ +0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ +0.000001] e820: remove [mem 0x000a0000-0x000fffff] usable
[ +0.000004] last_pfn = 0x29f000 max_arch_pfn = 0x400000000
[ +0.000002] MTRR default type: uncachable
[ +0.000001] MTRR fixed ranges enabled:
[ +0.000001] 00000-9FFFF write-back
[ +0.000000] A0000-BFFFF uncachable
[ +0.000000] C0000-DFFFF write-back
[ +0.000001] E0000-FFFFF write-protect
[ +0.000000] MTRR variable ranges enabled:
[ +0.000001] 0 base 00FF000000 mask 7FFF000000 write-protect
[ +0.000001] 1 base 0000000000 mask 7FC0000000 write-back
[ +0.000000] 2 base 0040000000 mask 7FF0000000 write-back
[ +0.000001] 3 base 0050000000 mask 7FF8000000 write-back
[ +0.000000] 4 base 0058000000 mask 7FFF800000 write-back
[ +0.000001] 5 base 0100000000 mask 7F00000000 write-back
[ +0.000000] 6 base 0200000000 mask 7E00000000 write-back
[ +0.000000] 7 base 4000000000 mask 6000000000 write-combining
[ +0.000001] 8 disabled
[ +0.000000] 9 disabled
[ +0.001080] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ +0.000196] last_pfn = 0x4fd10 max_arch_pfn = 0x400000000
[ +0.005092] esrt: Reserving ESRT space from 0x0000000049bd2f98 to 0x0000000049bd2fd0.
[ +0.000008] Scanning 1 areas for low memory corruption
[ +0.000002] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[ +0.000002] Using GB pages for direct mapping
[ +0.000001] BRK [0x09201000, 0x09201fff] PGTABLE
[ +0.000002] BRK [0x09202000, 0x09202fff] PGTABLE
[ +0.000000] BRK [0x09203000, 0x09203fff] PGTABLE
[ +0.000015] BRK [0x09204000, 0x09204fff] PGTABLE
[ +0.000001] BRK [0x09205000, 0x09205fff] PGTABLE
[ +0.000110] BRK [0x09206000, 0x09206fff] PGTABLE
[ +0.000032] Secure boot could not be determined
[ +0.000000] RAMDISK: [mem 0x3376d000-0x35badfff]
[ +0.000006] ACPI: Early table checksum verification disabled
[ +0.000002] ACPI: RSDP 0x000000004CAC6000 000024 (v02 HPQOEM)
[ +0.000002] ACPI: XSDT 0x000000004CAC60C0 000104 (v01 HPQOEM SLIC-MPC 01072009 HP 00010013)
[ +0.000004] ACPI: FACP 0x000000004CB125F0 000114 (v06 HPQOEM SLIC-MPC 01072009 HP 00010013)
[ +0.000004] ACPI: DSDT 0x000000004CAC6258 04C391 (v02 HPQOEM 8514 01072009 ACPI 20160527)
[ +0.000002] ACPI: FACS 0x000000004CBDC080 000040
[ +0.000001] ACPI: APIC 0x000000004CB12708 0000BC (v04 HPQOEM 8514 01072009 HP 00010013)
[ +0.000002] ACPI: FPDT 0x000000004CB127C8 000044 (v01 HPQOEM 8514 01072009 HP 00010013)
[ +0.000001] ACPI: FIDT 0x000000004CB12810 00009C (v01 HPQOEM 8514 01072009 HP 00010013)
[ +0.000002] ACPI: MCFG 0x000000004CB128B0 00003C (v01 HPQOEM 8514 01072009 HP 00000097)
[ +0.000002] ACPI: SSDT 0x000000004CB128F0 000334 (v01 HPQOEM 8514 00001000 ACPI 20160527)
[ +0.000002] ACPI: SSDT 0x000000004CB12C28 004793 (v02 HPQOEM 8514 00001000 ACPI 20160527)
[ +0.000001] ACPI: SSDT 0x000000004CB173C0 0017C6 (v02 HPQOEM 8514 00003000 ACPI 20160527)
[ +0.000002] ACPI: MSDM 0x000000004CB18B88 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00010013)
[ +0.000002] ACPI: SSDT 0x000000004CB18BE0 0031C6 (v02 HPQOEM 8514 00003000 ACPI 20160527)
[ +0.000001] ACPI: HPET 0x000000004CB1BDA8 000038 (v01 HPQOEM 8514 00000002 HP 01000013)
[ +0.000002] ACPI: SSDT 0x000000004CB1BDE0 001984 (v02 HPQOEM 8514 00001000 ACPI 20160527)
[ +0.000002] ACPI: SSDT 0x000000004CB1D768 0029C7 (v02 HPQOEM 8514 00000000 ACPI 20160527)
[ +0.000001] ACPI: UEFI 0x000000004CB20130 000048 (v01 HPQOEM 8514 00000002 HP 01000013)
[ +0.000002] ACPI: LPIT 0x000000004CB20178 00005C (v01 HPQOEM 8514 00000002 HP 01000013)
[ +0.000002] ACPI: SSDT 0x000000004CB201D8 001423 (v02 HPQOEM 8514 00001000 ACPI 20160527)
[ +0.000002] ACPI: SSDT 0x000000004CB21600 0005C9 (v02 HPQOEM 8514 00000000 ACPI 20160527)
[ +0.000001] ACPI: DBGP 0x000000004CB21BD0 000034 (v01 HPQOEM 8514 00000002 HP 01000013)
[ +0.000002] ACPI: DBG2 0x000000004CB21C08 000054 (v00 HPQOEM 8514 00000002 HP 01000013)
[ +0.000001] ACPI: SSDT 0x000000004CB21C60 000DCF (v02 HPQOEM 8514 00001000 ACPI 20160527)
[ +0.000002] ACPI: SSDT 0x000000004CB22A30 000144 (v02 HPQOEM 8514 00001000 ACPI 20160527)
[ +0.000002] ACPI: DMAR 0x000000004CB22B78 0000A8 (v01 HPQOEM 8514 00000002 HP 01000013)
[ +0.000001] ACPI: NHLT 0x000000004CB22C20 0017B0 (v00 HPQOEM 8514 00000002 HP 01000013)
[ +0.000002] ACPI: SSDT 0x000000004CB243D0 00009D (v01 HPQOEM 8514 00000001 ACPI 20160527)
[ +0.000002] ACPI: SSDT 0x000000004CB24470 000060 (v01 HPQOEM 8514 00000001 ACPI 20160527)
[ +0.000002] ACPI: TPM2 0x000000004CB244D0 000034 (v04 HPQOEM 8514 00000001 HP 00000000)
[ +0.000001] ACPI: WSMT 0x000000004CB24508 000028 (v01 HPQOEM 8514 01072009 HP 00010013)
[ +0.000002] ACPI: BGRT 0x000000004CB24530 000038 (v01 HPQOEM 8514 01072009 HP 00010013)
[ +0.000004] ACPI: Local APIC address 0xfee00000
[ +0.000198] No NUMA configuration found
[ +0.000001] Faking a node at [mem 0x0000000000000000-0x000000029effffff]
[ +0.000002] NODE_DATA(0) allocated [mem 0x29effa000-0x29effdfff]
[ +0.000013] Zone ranges:
[ +0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ +0.000001] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ +0.000001] Normal [mem 0x0000000100000000-0x000000029effffff]
[ +0.000000] Device empty
[ +0.000001] Movable zone start for each node
[ +0.000000] Early memory node ranges
[ +0.000001] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ +0.000000] node 0: [mem 0x0000000000100000-0x000000004b237fff]
[ +0.000001] node 0: [mem 0x000000004fd0f000-0x000000004fd0ffff]
[ +0.000000] node 0: [mem 0x0000000100000000-0x000000029effffff]
[ +0.000198] Reserved but unavailable: 20009 pages
[ +0.000001] Initmem setup node 0 [mem 0x0000000000001000-0x000000029effffff]
[ +0.000001] On node 0 totalpages: 2007511
[ +0.000001] DMA zone: 64 pages used for memmap
[ +0.000000] DMA zone: 23 pages reserved
[ +0.000000] DMA zone: 3998 pages, LIFO batch:0
[ +0.000052] DMA32 zone: 4745 pages used for memmap
[ +0.000000] DMA32 zone: 303673 pages, LIFO batch:63
[ +0.005016] Normal zone: 26560 pages used for memmap
[ +0.000001] Normal zone: 1699840 pages, LIFO batch:63
[ +0.022013] Reserving Intel graphics memory at [mem 0x59000000-0x5cffffff]
[ +0.000545] ACPI: PM-Timer IO Port: 0x1808
[ +0.000001] ACPI: Local APIC address 0xfee00000
[ +0.000005] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ +0.000071] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ +0.000001] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ +0.000001] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ +0.000001] ACPI: IRQ0 used by override.
[ +0.000000] ACPI: IRQ9 used by override.
[ +0.000001] Using ACPI (MADT) for SMP configuration information
[ +0.000001] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ +0.000005] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ +0.000009] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ +0.000001] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ +0.000001] PM: Registered nosave memory: [mem 0x4b238000-0x4caa2fff]
[ +0.000000] PM: Registered nosave memory: [mem 0x4caa3000-0x4cb29fff]
[ +0.000000] PM: Registered nosave memory: [mem 0x4cb2a000-0x4cbdefff]
[ +0.000001] PM: Registered nosave memory: [mem 0x4cbdf000-0x4fc35fff]
[ +0.000000] PM: Registered nosave memory: [mem 0x4fc36000-0x4fd0efff]
[ +0.000001] PM: Registered nosave memory: [mem 0x4fd10000-0x5cffffff]
[ +0.000000] PM: Registered nosave memory: [mem 0x5d000000-0xdfffffff]
[ +0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ +0.000001] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ +0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ +0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ +0.000001] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ +0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ +0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ +0.000001] PM: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[ +0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ +0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ +0.000001] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ +0.000001] [mem 0x5d000000-0xdfffffff] available for PCI devices
[ +0.000001] Booting paravirtualized kernel on bare hardware
[ +0.000002] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ +0.064023] random: get_random_bytes called from start_kernel+0x95/0x53f with crng_init=0
[ +0.000005] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ +0.000162] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
[ +0.000004] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ +0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ +0.000013] Built 1 zonelists, mobility grouping on. Total pages: 1976119
[ +0.000000] Policy zone: Normal
[ +0.000001] Kernel command line: BOOT_IMAGE=(loop)/arch/boot/x86_64/vmlinuz module_blacklist=intel_lpss_pci img_dev=/dev/disk/by-uuid/df54812e-95b6-40ba-a398-e5d94d84d3fd img_loop=/boot/isos/halberd-2018.11.28-x86_64.iso earlymodules=loop
[ +0.003540] Calgary: detecting Calgary via BIOS EBDA area
[ +0.000001] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ +0.017864] Memory: 7724556K/8030044K available (12300K kernel code, 1374K rwdata, 3640K rodata, 1532K init, 3860K bss, 305488K reserved, 0K cma-reserved)
[ +0.000070] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ +0.000004] ftrace: allocating 35539 entries in 139 pages
[ +0.009095] rcu: Preemptible hierarchical RCU implementation.
[ +0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ +0.000000] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ +0.000001] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ +0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ +0.000001] Tasks RCU enabled.
[ +0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ +0.000901] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[ +0.000176] rcu: Offload RCU callbacks from CPUs: (none).
[ +0.000182] Console: colour dummy device 80x25
[ +0.000003] console [tty0] enabled
[ +0.000011] ACPI: Core revision 20180810
[ +0.000518] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ +0.000052] hpet clockevent registered
[ +0.000050] APIC: Switch to symmetric I/O mode setup
[ +0.000002] DMAR: Host address width 39
[ +0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ +0.000004] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ +0.000001] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ +0.000002] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ +0.000001] DMAR: RMRR base: 0x0000004d7fc000 end: 0x0000004da45fff
[ +0.000002] DMAR: RMRR base: 0x00000058800000 end: 0x0000005cffffff
[ +0.000001] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ +0.000001] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ +0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ +0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ +0.002082] DMAR-IR: Enabled IRQ remapping in xapic mode
[ +0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[ +0.005637] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ +0.015567] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
[ +0.000008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3985.00 BogoMIPS (lpj=6640000)
[ +0.000002] pid_max: default: 32768 minimum: 301
[ +0.000727] Security Framework initialized
[ +0.000001] Yama: becoming mindful.
[ +0.000004] AppArmor: AppArmor disabled by boot time parameter
[ +0.000943] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ +0.000454] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ +0.000020] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ +0.000013] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ +0.000148] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ +0.000000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ +0.000004] mce: CPU supports 10 MCE banks
[ +0.000007] CPU0: Thermal monitoring enabled (TM1)
[ +0.000013] process: using mwait in idle threads
[ +0.000002] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ +0.000000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ +0.000001] Spectre V2 : Mitigation: Full generic retpoline
[ +0.000001] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ +0.000000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ +0.000000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ +0.000001] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ +0.000178] Freeing SMP alternatives memory: 28K
[ +0.001579] TSC deadline timer enabled
[ +0.000005] smpboot: CPU0: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xb)
[ +0.019259] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ +0.000042] ... version: 4
[ +0.000000] ... bit width: 48
[ +0.000000] ... generic registers: 4
[ +0.000001] ... value mask: 0000ffffffffffff
[ +0.000000] ... max period: 00007fffffffffff
[ +0.000000] ... fixed-purpose events: 3
[ +0.000001] ... event mask: 000000070000000f
[ +0.006606] rcu: Hierarchical SRCU implementation.
[ +0.023444] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ +0.006592] smp: Bringing up secondary CPUs ...
[ +0.040003] x86: Booting SMP configuration:
[ +0.000001] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ +0.240320] smp: Brought up 1 node, 8 CPUs
[ +0.000000] smpboot: Max logical packages: 1
[ +0.000000] smpboot: Total of 8 processors activated (31884.00 BogoMIPS)
[ +0.003171] devtmpfs: initialized
[ +0.000000] x86/mm: Memory block size: 128MB
[ +0.000257] PM: Registering ACPI NVS region [mem 0x4cb2a000-0x4cbdefff] (741376 bytes)
[ +0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ +0.000000] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ +0.000000] pinctrl core: initialized pinctrl subsystem
[ +0.000000] RTC time: 21:07:09, date: 11/29/18
[ +0.000000] NET: Registered protocol family 16
[ +0.000000] audit: initializing netlink subsys (disabled)
[ +0.000000] audit: type=2000 audit(1543525629.369:1): state=initialized audit_enabled=0 res=1
[ +0.002911] cpuidle: using governor ladder
[ +0.000001] cpuidle: using governor menu
[ +0.000000] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ +0.000000] ACPI: bus type PCI registered
[ +0.000000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ +0.000020] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ +0.000001] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ +0.000009] PCI: Using configuration type 1 for base access
[ +0.000547] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ +0.000000] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ +0.000000] ACPI: Added _OSI(Module Device)
[ +0.000000] ACPI: Added _OSI(Processor Device)
[ +0.000000] ACPI: Added _OSI(3.0 _SCP Extensions)
[ +0.000000] ACPI: Added _OSI(Processor Aggregator Device)
[ +0.000000] ACPI: Added _OSI(Linux-Dell-Video)
[ +0.000000] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ +0.041730] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XDCI], AE_NOT_FOUND (20180810/dswload2-160)
[ +0.000008] fbcon: Taking over console
[ +0.000003] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Ignore error and continue table load (20180810/psobject-604)
[ +0.000003] ACPI Error: Skip parsing opcode Scope (20180810/psloop-543)
[ +0.000242] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.I2C1.TPL1], AE_NOT_FOUND (20180810/dswload2-160)
[ +0.000004] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Ignore error and continue table load (20180810/psobject-604)
[ +0.000002] ACPI Error: Skip parsing opcode Scope (20180810/psloop-543)
[ +0.000473] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.GPLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.TPLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.GUPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.TUPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000021] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000003] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.004433] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.001351] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000003] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.001352] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000003] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.001347] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000003] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.001350] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000003] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.001193] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.001347] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.001353] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.001350] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000003] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.001391] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.USR1._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.USR1._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000003] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.USR2._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.USR2._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000024] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000023] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000023] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000023] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000023] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000024] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000003] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316)
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221)
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543)
[ +0.000069] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XDCI], AE_NOT_FOUND (20180810/dswload2-160)
[ +0.000003] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180810/psobject-221)
[ +0.000003] ACPI Error: Ignore error and continue table load (20180810/psobject-604)
[ +0.000002] ACPI Error: Skip parsing opcode Scope (20180810/psloop-543)
[ +0.001635] ACPI: 13 ACPI AML tables successfully acquired and loaded
[ +0.073052] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.I2C1.TPL1.TDX], AE_NOT_FOUND (20180810/psargs-330)
[ +0.000014] ACPI Error: Method parse/execution failed \_SB.PCI0.I2C1.INC1, AE_NOT_FOUND (20180810/psparse-516)
[ +0.000010] ACPI Error: Method parse/execution failed \_SB.PCI0.I2C1._INI, AE_NOT_FOUND (20180810/psparse-516)
[ +0.002195] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ +0.002507] ACPI: Dynamic OEM Table Load:
[ +0.000000] ACPI: SSDT 0xFFFFA2E014C65800 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ +0.000000] ACPI: Dynamic OEM Table Load:
[ +0.000000] ACPI: SSDT 0xFFFFA2E01520C800 0005EB (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ +0.000000] ACPI: Dynamic OEM Table Load:
[ +0.000000] ACPI: SSDT 0xFFFFA2E014D2DA00 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ +0.000319] ACPI: Dynamic OEM Table Load:
[ +0.000007] ACPI: SSDT 0xFFFFA2E015208800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ +0.001447] ACPI: Dynamic OEM Table Load:
[ +0.000012] ACPI: SSDT 0xFFFFA2E014D32000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
[ +0.002200] ACPI: Dynamic OEM Table Load:
[ +0.000007] ACPI: SSDT 0xFFFFA2E014C60C00 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ +0.000905] ACPI: Dynamic OEM Table Load:
[ +0.000006] ACPI: SSDT 0xFFFFA2E014C60800 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
[ +0.006664] ACPI: EC: EC started
[ +0.000001] ACPI: EC: interrupt blocked
[ +0.016002] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ +0.000001] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ +0.000001] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ +0.000001] ACPI: Interpreter enabled
[ +0.000036] ACPI: (supports S0 S4 S5)
[ +0.000001] ACPI: Using IOAPIC for interrupt routing
[ +0.000033] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ +0.001173] ACPI: Enabled 8 GPEs in block 00 to 7F
[ +0.005131] ACPI: Power Resource [PXP] (on)
[ +0.009541] ACPI: Power Resource [BTPR] (off)
[ +0.001141] ACPI: Power Resource [PAUD] (on)
[ +0.002485] ACPI: Power Resource [V0PR] (on)
[ +0.000333] ACPI: Power Resource [V1PR] (on)
[ +0.000326] ACPI: Power Resource [V2PR] (on)
[ +0.002118] ACPI: Power Resource [PXTC] (off)
[ +0.001853] ACPI: Power Resource [WRST] (on)
[ +0.012011] ACPI: Power Resource [PIN] (off)
[ +0.000468] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ +0.000004] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ +0.001146] acpi PNP0A08:00: _OSC: platform does not support [AER]
[ +0.002121] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
[ +0.000001] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ +0.000895] PCI host bridge to bus 0000:00
[ +0.000003] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ +0.000001] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ +0.000001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ +0.000000] pci_bus 0000:00: root bus resource [mem 0x5d000000-0xdfffffff window]
[ +0.000001] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[ +0.000001] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[ +0.000001] pci_bus 0000:00: root bus resource [bus 00-fe]
[ +0.000006] pci 0000:00:00.0: [8086:3e34] type 00 class 0x060000
[ +0.000299] pci 0000:00:02.0: [8086:3ea0] type 00 class 0x030000
[ +0.000009] pci 0000:00:02.0: reg 0x10: [mem 0x604a000000-0x604affffff 64bit]
[ +0.000005] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[ +0.000003] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ +0.000124] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ +0.000011] pci 0000:00:04.0: reg 0x10: [mem 0x604b110000-0x604b117fff 64bit]
[ +0.000210] pci 0000:00:12.0: [8086:9df9] type 00 class 0x118000
[ +0.000023] pci 0000:00:12.0: reg 0x10: [mem 0x604b129000-0x604b129fff 64bit]
[ +0.000179] pci 0000:00:13.0: [8086:9dfc] type 00 class 0x070000
[ +0.000022] pci 0000:00:13.0: reg 0x10: [mem 0x604b122000-0x604b123fff 64bit]
[ +0.000057] pci 0000:00:13.0: PME# supported from D0 D3hot
[ +0.000141] pci 0000:00:14.0: [8086:9ded] type 00 class 0x0c0330
[ +0.000017] pci 0000:00:14.0: reg 0x10: [mem 0x604b100000-0x604b10ffff 64bit]
[ +0.000053] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ +0.000325] pci 0000:00:14.2: [8086:9def] type 00 class 0x050000
[ +0.000018] pci 0000:00:14.2: reg 0x10: [mem 0x604b120000-0x604b121fff 64bit]
[ +0.000010] pci 0000:00:14.2: reg 0x18: [mem 0x604b128000-0x604b128fff 64bit]
[ +0.000144] pci 0000:00:14.3: [8086:9df0] type 00 class 0x028000
[ +0.000035] pci 0000:00:14.3: reg 0x10: [mem 0x604b11c000-0x604b11ffff 64bit]
[ +0.000092] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[ +0.000203] pci 0000:00:15.0: [8086:9de8] type 00 class 0x0c8000
[ +0.000089] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ +0.003788] pci 0000:00:15.1: [8086:9de9] type 00 class 0x0c8000
[ +0.000087] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ +0.000407] pci 0000:00:16.0: [8086:9de0] type 00 class 0x078000
[ +0.000022] pci 0000:00:16.0: reg 0x10: [mem 0x604b125000-0x604b125fff 64bit]
[ +0.000070] pci 0000:00:16.0: PME# supported from D3hot
[ +0.000209] pci 0000:00:1c.0: [8086:9dba] type 01 class 0x060400
[ +0.000076] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ +0.000016] pci 0000:00:1c.0: PTM enabled (root), 4dns granularity
[ +0.000159] pci 0000:00:1c.4: [8086:9dbc] type 01 class 0x060400
[ +0.000064] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ +0.000013] pci 0000:00:1c.4: PTM enabled (root), 4dns granularity
[ +0.000157] pci 0000:00:1d.0: [8086:9db4] type 01 class 0x060400
[ +0.000066] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ +0.000014] pci 0000:00:1d.0: PTM enabled (root), 4dns granularity
[ +0.000183] pci 0000:00:1f.0: [8086:9d84] type 00 class 0x060100
[ +0.000296] pci 0000:00:1f.3: [8086:9dc8] type 00 class 0x040100
[ +0.000039] pci 0000:00:1f.3: reg 0x10: [mem 0x604b118000-0x604b11bfff 64bit]
[ +0.000036] pci 0000:00:1f.3: reg 0x20: [mem 0x604b000000-0x604b0fffff 64bit]
[ +0.000075] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ +0.000575] pci 0000:00:1f.4: [8086:9da3] type 00 class 0x0c0500
[ +0.000020] pci 0000:00:1f.4: reg 0x10: [mem 0x604b124000-0x604b1240ff 64bit]
[ +0.000028] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ +0.000143] pci 0000:00:1f.5: [8086:9da4] type 00 class 0x0c8000
[ +0.000015] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ +0.000508] pci 0000:01:00.0: [10ec:525a] type 00 class 0xff0000
[ +0.000032] pci 0000:01:00.0: reg 0x14: [mem 0x8e300000-0x8e300fff]
[ +0.000104] pci 0000:01:00.0: supports D1 D2
[ +0.000001] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ +0.000238] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ +0.000003] pci 0000:00:1c.0: bridge window [mem 0x8e300000-0x8e3fffff]
[ +0.000095] pci 0000:02:00.0: [8086:15d3] type 01 class 0x060400
[ +0.000050] pci 0000:02:00.0: enabling Extended Tags
[ +0.000069] pci 0000:02:00.0: supports D1 D2
[ +0.000001] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ +0.000108] pci 0000:00:1c.4: PCI bridge to [bus 02-6c]
[ +0.000003] pci 0000:00:1c.4: bridge window [mem 0x60000000-0x8e0fffff]
[ +0.000004] pci 0000:00:1c.4: bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[ +0.000053] pci 0000:03:00.0: [8086:15d3] type 01 class 0x060400
[ +0.000054] pci 0000:03:00.0: enabling Extended Tags
[ +0.000072] pci 0000:03:00.0: supports D1 D2
[ +0.000001] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ +0.000072] pci 0000:03:01.0: [8086:15d3] type 01 class 0x060400
[ +0.000054] pci 0000:03:01.0: enabling Extended Tags
[ +0.000071] pci 0000:03:01.0: supports D1 D2
[ +0.000001] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ +0.000070] pci 0000:03:02.0: [8086:15d3] type 01 class 0x060400
[ +0.000054] pci 0000:03:02.0: enabling Extended Tags
[ +0.000070] pci 0000:03:02.0: supports D1 D2
[ +0.000000] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ +0.000075] pci 0000:03:04.0: [8086:15d3] type 01 class 0x060400
[ +0.000054] pci 0000:03:04.0: enabling Extended Tags
[ +0.000071] pci 0000:03:04.0: supports D1 D2
[ +0.000000] pci 0000:03:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ +0.000088] pci 0000:02:00.0: PCI bridge to [bus 03-6c]
[ +0.000007] pci 0000:02:00.0: bridge window [mem 0x60000000-0x8e0fffff]
[ +0.000005] pci 0000:02:00.0: bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[ +0.000046] pci 0000:04:00.0: [8086:15d2] type 00 class 0x088000
[ +0.000031] pci 0000:04:00.0: reg 0x10: [mem 0x8e000000-0x8e03ffff]
[ +0.000011] pci 0000:04:00.0: reg 0x14: [mem 0x8e040000-0x8e040fff]
[ +0.000057] pci 0000:04:00.0: enabling Extended Tags
[ +0.000088] pci 0000:04:00.0: supports D1 D2
[ +0.000001] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ +0.000053] pci 0000:04:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:03:00.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
[ +0.000073] pci 0000:03:00.0: PCI bridge to [bus 04]
[ +0.000007] pci 0000:03:00.0: bridge window [mem 0x8e000000-0x8e0fffff]
[ +0.000039] pci 0000:03:01.0: PCI bridge to [bus 05-37]
[ +0.000008] pci 0000:03:01.0: bridge window [mem 0x60000000-0x77efffff]
[ +0.000005] pci 0000:03:01.0: bridge window [mem 0x6000000000-0x601fffffff 64bit pref]
[ +0.000057] pci 0000:38:00.0: [8086:15d4] type 00 class 0x0c0330
[ +0.000033] pci 0000:38:00.0: reg 0x10: [mem 0x77f00000-0x77f0ffff]
[ +0.000073] pci 0000:38:00.0: enabling Extended Tags
[ +0.000093] pci 0000:38:00.0: supports D1 D2
[ +0.000001] pci 0000:38:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ +0.000058] pci 0000:38:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:03:02.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
[ +0.000081] pci 0000:03:02.0: PCI bridge to [bus 38]
[ +0.000008] pci 0000:03:02.0: bridge window [mem 0x77f00000-0x77ffffff]
[ +0.000039] pci 0000:03:04.0: PCI bridge to [bus 39-6c]
[ +0.000007] pci 0000:03:04.0: bridge window [mem 0x78000000-0x8dffffff]
[ +0.000005] pci 0000:03:04.0: bridge window [mem 0x6020000000-0x6049ffffff 64bit pref]
[ +0.000118] pci 0000:6d:00.0: [1179:0116] type 00 class 0x010802
[ +0.000026] pci 0000:6d:00.0: reg 0x10: [mem 0x8e200000-0x8e203fff 64bit]
[ +0.000190] pci 0000:00:1d.0: PCI bridge to [bus 6d]
[ +0.000004] pci 0000:00:1d.0: bridge window [mem 0x8e200000-0x8e2fffff]
[ +0.002252] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ +0.000067] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
[ +0.000064] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ +0.000064] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ +0.000064] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ +0.000064] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ +0.000064] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ +0.000063] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ +0.009390] ACPI: EC: interrupt unblocked
[ +0.000042] ACPI: EC: event unblocked
[ +0.000021] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ +0.000001] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ +0.000054] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ +0.000000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ +0.000000] pci 0000:00:02.0: vgaarb: bridge control possible
[ +0.000000] vgaarb: loaded
[ +0.000000] ACPI: bus type USB registered
[ +0.000000] usbcore: registered new interface driver usbfs
[ +0.000000] usbcore: registered new interface driver hub
[ +0.000000] usbcore: registered new device driver usb
[ +0.000000] pps_core: LinuxPPS API ver. 1 registered
[ +0.000000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ +0.000000] PTP clock support registered
[ +0.000000] EDAC MC: Ver: 3.0.0
[ +0.000000] Registered efivars operations
[ +0.021450] PCI: Using ACPI for IRQ routing
[ +0.031121] PCI: pci_cache_line_size set to 64 bytes
[ +0.000429] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ +0.000001] e820: reserve RAM buffer [mem 0x4b238000-0x4bffffff]
[ +0.000001] e820: reserve RAM buffer [mem 0x4fd10000-0x4fffffff]
[ +0.000000] e820: reserve RAM buffer [mem 0x29f000000-0x29fffffff]
[ +0.000054] NetLabel: Initializing
[ +0.000000] NetLabel: domain hash size = 128
[ +0.000000] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ +0.000009] NetLabel: unlabeled traffic allowed by default
[ +0.000002] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ +0.000000] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ +0.002579] clocksource: Switched to clocksource tsc-early
[ +0.005231] VFS: Disk quotas dquot_6.6.0
[ +0.000012] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ +0.000040] pnp: PnP ACPI init
[ +0.000146] system 00:00: [io 0x0680-0x069f] has been reserved
[ +0.000001] system 00:00: [io 0x164e-0x164f] has been reserved
[ +0.000003] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0.000013] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ +0.000070] system 00:02: [io 0x1854-0x1857] has been reserved
[ +0.000002] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ +0.000018] pnp 00:03: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ +0.000158] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ +0.000001] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ +0.000001] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ +0.000001] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ +0.000001] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ +0.000001] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ +0.000001] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ +0.000000] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ +0.000003] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0.000167] system 00:05: [io 0x1800-0x18fe] could not be reserved
[ +0.000001] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved
[ +0.000001] system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[ +0.000001] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ +0.000001] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ +0.000001] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[ +0.000001] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ +0.000002] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0.000221] system 00:06: [io 0x2000-0x20fe] has been reserved
[ +0.000003] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0.000789] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0.001551] pnp: PnP ACPI: found 8 devices
[ +0.005212] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ +0.000024] pci 0000:03:01.0: bridge window [io 0x1000-0x0fff] to [bus 05-37] add_size 1000
[ +0.000015] pci 0000:03:04.0: bridge window [io 0x1000-0x0fff] to [bus 39-6c] add_size 1000
[ +0.000008] pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-6c] add_size 2000
[ +0.000005] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 02-6c] add_size 2000
[ +0.000007] pci 0000:00:15.0: BAR 0: assigned [mem 0x4010000000-0x4010000fff 64bit]
[ +0.000047] pci 0000:00:15.1: BAR 0: assigned [mem 0x4010001000-0x4010001fff 64bit]
[ +0.000054] pci 0000:00:1c.4: BAR 13: assigned [io 0x4000-0x5fff]
[ +0.000002] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ +0.000003] pci 0000:00:1c.0: bridge window [mem 0x8e300000-0x8e3fffff]
[ +0.000005] pci 0000:02:00.0: BAR 13: assigned [io 0x4000-0x5fff]
[ +0.000001] pci 0000:03:01.0: BAR 13: assigned [io 0x4000-0x4fff]
[ +0.000001] pci 0000:03:04.0: BAR 13: assigned [io 0x5000-0x5fff]
[ +0.000001] pci 0000:03:00.0: PCI bridge to [bus 04]
[ +0.000004] pci 0000:03:00.0: bridge window [mem 0x8e000000-0x8e0fffff]
[ +0.000007] pci 0000:03:01.0: PCI bridge to [bus 05-37]
[ +0.000002] pci 0000:03:01.0: bridge window [io 0x4000-0x4fff]
[ +0.000004] pci 0000:03:01.0: bridge window [mem 0x60000000-0x77efffff]
[ +0.000003] pci 0000:03:01.0: bridge window [mem 0x6000000000-0x601fffffff 64bit pref]
[ +0.000005] pci 0000:03:02.0: PCI bridge to [bus 38]
[ +0.000004] pci 0000:03:02.0: bridge window [mem 0x77f00000-0x77ffffff]
[ +0.000008] pci 0000:03:04.0: PCI bridge to [bus 39-6c]
[ +0.000002] pci 0000:03:04.0: bridge window [io 0x5000-0x5fff]
[ +0.000004] pci 0000:03:04.0: bridge window [mem 0x78000000-0x8dffffff]
[ +0.000003] pci 0000:03:04.0: bridge window [mem 0x6020000000-0x6049ffffff 64bit pref]
[ +0.000005] pci 0000:02:00.0: PCI bridge to [bus 03-6c]
[ +0.000001] pci 0000:02:00.0: bridge window [io 0x4000-0x5fff]
[ +0.000004] pci 0000:02:00.0: bridge window [mem 0x60000000-0x8e0fffff]
[ +0.000003] pci 0000:02:00.0: bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[ +0.000005] pci 0000:00:1c.4: PCI bridge to [bus 02-6c]
[ +0.000002] pci 0000:00:1c.4: bridge window [io 0x4000-0x5fff]
[ +0.000002] pci 0000:00:1c.4: bridge window [mem 0x60000000-0x8e0fffff]
[ +0.000002] pci 0000:00:1c.4: bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[ +0.000003] pci 0000:00:1d.0: PCI bridge to [bus 6d]
[ +0.000003] pci 0000:00:1d.0: bridge window [mem 0x8e200000-0x8e2fffff]
[ +0.000005] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ +0.000001] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ +0.000001] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ +0.000000] pci_bus 0000:00: resource 7 [mem 0x5d000000-0xdfffffff window]
[ +0.000001] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[ +0.000001] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
[ +0.000001] pci_bus 0000:01: resource 1 [mem 0x8e300000-0x8e3fffff]
[ +0.000001] pci_bus 0000:02: resource 0 [io 0x4000-0x5fff]
[ +0.000000] pci_bus 0000:02: resource 1 [mem 0x60000000-0x8e0fffff]
[ +0.000001] pci_bus 0000:02: resource 2 [mem 0x6000000000-0x6049ffffff 64bit pref]
[ +0.000001] pci_bus 0000:03: resource 0 [io 0x4000-0x5fff]
[ +0.000001] pci_bus 0000:03: resource 1 [mem 0x60000000-0x8e0fffff]
[ +0.000000] pci_bus 0000:03: resource 2 [mem 0x6000000000-0x6049ffffff 64bit pref]
[ +0.000001] pci_bus 0000:04: resource 1 [mem 0x8e000000-0x8e0fffff]
[ +0.000001] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ +0.000001] pci_bus 0000:05: resource 1 [mem 0x60000000-0x77efffff]
[ +0.000001] pci_bus 0000:05: resource 2 [mem 0x6000000000-0x601fffffff 64bit pref]
[ +0.000000] pci_bus 0000:38: resource 1 [mem 0x77f00000-0x77ffffff]
[ +0.000001] pci_bus 0000:39: resource 0 [io 0x5000-0x5fff]
[ +0.000001] pci_bus 0000:39: resource 1 [mem 0x78000000-0x8dffffff]
[ +0.000001] pci_bus 0000:39: resource 2 [mem 0x6020000000-0x6049ffffff 64bit pref]
[ +0.000000] pci_bus 0000:6d: resource 1 [mem 0x8e200000-0x8e2fffff]
[ +0.000114] NET: Registered protocol family 2
[ +0.000081] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ +0.000018] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ +0.000071] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ +0.000115] TCP: Hash tables configured (established 65536 bind 65536)
[ +0.000022] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ +0.000018] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ +0.000036] NET: Registered protocol family 1
[ +0.000003] NET: Registered protocol family 44
[ +0.000017] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ +0.000530] PCI: CLS mismatch (64 != 128), using 64 bytes
[ +0.000080] pci 0000:02:00.0: enabling device (0006 -> 0007)
[ +0.000172] Unpacking initramfs...
[ +2.314518] Freeing initrd memory: 37124K
[ +0.000041] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ +0.000002] software IO TLB: mapped [mem 0x43883000-0x47883000] (64MB)
[ +0.000020] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
[ +0.000023] clocksource: Switched to clocksource tsc
[ +0.000102] Scanning for low memory corruption every 60 seconds
[ +0.000359] Initialise system trusted keyrings
[ +0.000007] Key type blacklist registered
[ +0.000034] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ +0.000642] zbud: loaded
[ +0.000172] pstore: using zstd compression
[ +0.000586] Key type asymmetric registered
[ +0.000001] Asymmetric key parser 'x509' registered
[ +0.000004] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ +0.000023] io scheduler noop registered
[ +0.000000] io scheduler deadline registered
[ +0.000014] io scheduler cfq registered (default)
[ +0.000001] io scheduler mq-deadline registered
[ +0.000000] io scheduler kyber registered
[ +0.000012] io scheduler bfq registered
[ +0.000878] pcieport 0000:03:01.0: enabling device (0006 -> 0007)
[ +0.000213] pcieport 0000:03:04.0: enabling device (0006 -> 0007)
[ +0.000144] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[ +0.000011] pcieport 0000:00:1c.4: Signaling PME with IRQ 123
[ +0.000009] pcieport 0000:00:1d.0: Signaling PME with IRQ 124
[ +0.000011] pciehp 0000:00:1c.4:pcie004: Slot #8 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ +0.000031] pciehp 0000:03:01.0:pcie204: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ +0.000029] pciehp 0000:03:04.0:pcie204: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ +0.000031] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ +0.000045] efifb: invalid framebuffer address
[ +0.000004] intel_idle: MWAIT substates: 0x11142120
[ +0.000001] intel_idle: v0.4.1 model 0x8E
[ +0.000231] intel_idle: lapic_timer_reliable_states 0xffffffff
[ +0.000065] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ +0.000004] ACPI: Lid Switch [LID0]
[ +0.000017] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ +0.000003] ACPI: Power Button [PWRB]
[ +0.000021] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ +0.000006] ACPI: Power Button [PWRF]
[ +0.007333] thermal LNXTHERM:00: registered as thermal_zone0
[ +0.000001] ACPI: Thermal Zone [TZ01] (70 C)
[ +0.000277] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ +0.000566] serial 0000:00:13.0: enabling device (0000 -> 0002)
[ +0.001541] nvme nvme0: pci function 0000:6d:00.0
[ +0.000017] usbcore: registered new interface driver usbserial_generic
[ +0.000003] usbserial: USB Serial support registered for generic
[ +0.000016] rtc_cmos 00:01: RTC can wake from S4
[ +0.001096] rtc_cmos 00:01: registered as rtc0
[ +0.000020] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ +0.000031] intel_pstate: Intel P-state driver initializing
[ +0.000681] intel_pstate: HWP enabled
[ +0.000077] ledtrig-cpu: registered to indicate activity on CPUs
[ +0.000019] intel_pmc_core: initialized
[ +0.000132] NET: Registered protocol family 10
[ +0.002533] Segment Routing with IPv6
[ +0.000012] NET: Registered protocol family 17
[ +0.000613] RAS: Correctable Errors collector initialized.
[ +0.000048] microcode: sig=0x806eb, pf=0x80, revision=0x98
[ +0.000193] microcode: Microcode Update Driver: v2.2.
[ +0.000006] sched_clock: Marking stable (3140572402, -2714768)->(3145939148, -8081514)
[ +0.000226] registered taskstats version 1
[ +0.000004] Loading compiled-in X.509 certificates
[ +0.001103] Loaded X.509 cert 'Build time autogenerated kernel key: d24dd2646acfd3dc1dfbac003e2c7dc429e13dc1'
[ +0.000014] zswap: loaded using pool lzo/zbud
[ +0.001453] Key type big_key registered
[ +0.001658] Magic number: 10:504:147
[ +0.000021] pci 0000:00:14.0: hash matches
[ +0.000021] acpi device:18: hash matches
[ +0.000217] rtc_cmos 00:01: setting system clock to 2018-11-29 21:07:12 UTC (1543525632)
[ +0.214910] nvme0n1: p1 p2 p3 p4
[ +0.004050] Freeing unused decrypted memory: 2040K
[ +0.001392] Freeing unused kernel image memory: 1532K
[ +0.000003] Write protecting the kernel read-only data: 18432k
[ +0.001067] Freeing unused kernel image memory: 2008K
[ +0.000094] Freeing unused kernel image memory: 456K
[ +0.005737] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ +0.000003] Run /init as init process
[ +0.061011] loop: module loaded
[ +0.039375] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ +0.000001] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ +0.003640] serio: i8042 KBD port at 0x60,0x64 irq 1
[ +0.000322] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ +0.000144] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ +0.003032] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ +0.002810] thunderbolt 0000:04:00.0: NHI initialized, starting thunderbolt
[ +0.000004] thunderbolt 0000:04:00.0: allocating TX ring 0 of size 10
[ +0.000016] thunderbolt 0000:04:00.0: allocating RX ring 0 of size 10
[ +0.000014] thunderbolt 0000:04:00.0: control channel created
[ +0.000001] thunderbolt 0000:04:00.0: control channel starting...
[ +0.000002] thunderbolt 0000:04:00.0: starting TX ring 0
[ +0.000008] thunderbolt 0000:04:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[ +0.000002] thunderbolt 0000:04:00.0: starting RX ring 0
[ +0.000007] thunderbolt 0000:04:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[ +0.002307] cryptd: max_cpu_qlen set to 1000
[ +0.000008] Linux agpgart interface v0.103
[ +0.001614] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ +0.000007] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ +0.001077] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[ +0.000005] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ +0.000200] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ +0.000002] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ +0.000002] usb usb1: Product: xHCI Host Controller
[ +0.000001] usb usb1: Manufacturer: Linux 4.19.4-arch1-1-ARCH xhci-hcd
[ +0.000002] usb usb1: SerialNumber: 0000:00:14.0
[ +0.000139] hub 1-0:1.0: USB hub found
[ +0.000016] hub 1-0:1.0: 12 ports detected
[ +0.002404] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ +0.000004] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ +0.000004] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ +0.000048] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ +0.000002] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ +0.000001] usb usb2: Product: xHCI Host Controller
[ +0.000005] usb usb2: Manufacturer: Linux 4.19.4-arch1-1-ARCH xhci-hcd
[ +0.000001] usb usb2: SerialNumber: 0000:00:14.0
[ +0.000124] hub 2-0:1.0: USB hub found
[ +0.000014] hub 2-0:1.0: 6 ports detected
[ +0.000392] usb: port power management may be unreliable
[ +0.000598] xhci_hcd 0000:38:00.0: xHCI Host Controller
[ +0.000006] xhci_hcd 0000:38:00.0: new USB bus registered, assigned bus number 3
[ +0.001130] xhci_hcd 0000:38:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[ +0.000205] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ +0.000002] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ +0.000002] usb usb3: Product: xHCI Host Controller
[ +0.000001] usb usb3: Manufacturer: Linux 4.19.4-arch1-1-ARCH xhci-hcd
[ +0.000002] usb usb3: SerialNumber: 0000:38:00.0
[ +0.000107] hub 3-0:1.0: USB hub found
[ +0.000010] hub 3-0:1.0: 2 ports detected
[ +0.000541] xhci_hcd 0000:38:00.0: xHCI Host Controller
[ +0.000004] xhci_hcd 0000:38:00.0: new USB bus registered, assigned bus number 4
[ +0.000003] xhci_hcd 0000:38:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ +0.000038] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ +0.000002] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ +0.000002] usb usb4: Product: xHCI Host Controller
[ +0.000001] usb usb4: Manufacturer: Linux 4.19.4-arch1-1-ARCH xhci-hcd
[ +0.000002] usb usb4: SerialNumber: 0000:38:00.0
[ +0.000117] hub 4-0:1.0: USB hub found
[ +0.000013] hub 4-0:1.0: 2 ports detected
[ +0.014118] AVX2 version of gcm_enc/dec engaged.
[ +0.000000] AES CTR mode by8 optimization enabled
[ +0.032414] VFIO - User Level meta-driver version: 0.3
[ +0.031604] thunderbolt 0000:04:00.0: current switch config:
[ +0.000002] thunderbolt 0000:04:00.0: Switch: 8086:15d3 (Revision: 6, TB Version: 2)
[ +0.000000] thunderbolt 0000:04:00.0: Max Port Number: 11
[ +0.000001] thunderbolt 0000:04:00.0: Config:
[ +0.000001] thunderbolt 0000:04:00.0: Upstream Port Number: 5 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 254ms
[ +0.000001] thunderbolt 0000:04:00.0: unknown1: 0x0 unknown4: 0x0
[ +0.009264] [drm] Replacing VGA console driver
[ +0.001344] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ +0.000000] [drm] Driver supports precise vblank timestamp query.
[ +0.000750] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ +0.000509] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ +0.001314] random: fast init done
[ +0.003249] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ +0.026734] thunderbolt 0000:04:00.0: 0: uid: 0xf06a0024698600
[ +0.001408] thunderbolt 0000:04:00.0: Port 0: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 7/7
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 8
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x800000
[ +0.000508] thunderbolt 0000:04:00.0: Port 1: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 15/15
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 16
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x3c00000
[ +0.000509] thunderbolt 0000:04:00.0: Port 2: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 15/15
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 16
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x3c00000
[ +0.000515] thunderbolt 0000:04:00.0: Port 3: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 15/15
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 16
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x3c00000
[ +0.000503] thunderbolt 0000:04:00.0: Port 4: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 15/15
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 16
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x3c00000
[ +0.000001] thunderbolt 0000:04:00.0: 0:5: disabled by eeprom
[ +0.000124] thunderbolt 0000:04:00.0: Port 6: 8086:15d3 (Revision: 6, TB Version: 1, Type: PCIe (0x100101))
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 8/8
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 2
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x800000
[ +0.000125] thunderbolt 0000:04:00.0: Port 7: 8086:15d3 (Revision: 6, TB Version: 1, Type: PCIe (0x100101))
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 8/8
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 2
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x800000
[ +0.000125] thunderbolt 0000:04:00.0: Port 8: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 9/9
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 2
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x800000
[ +0.000125] thunderbolt 0000:04:00.0: Port 9: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0101))
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 9/9
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 2
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x1000000
[ +0.000125] thunderbolt 0000:04:00.0: Port 10: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0101))
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 9/9
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 2
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x1000000
[ +0.000125] thunderbolt 0000:04:00.0: Port 11: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 9/9
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 2
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x800000
[ +0.197856] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ +0.209814] usb 1-5: New USB device found, idVendor=0408, idProduct=5251, bcdDevice= 0.04
[ +0.000002] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000001] usb 1-5: Product: HP Wide Vision FHD Camera
[ +0.000001] usb 1-5: Manufacturer: SunplusIT Inc
[ +0.000001] usb 1-5: SerialNumber: 01.00.00
[ +0.063536] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ +0.017190] usb 2-1: New USB device found, idVendor=1b1c, idProduct=1a0e, bcdDevice= 1.00
[ +0.000002] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ +0.000001] usb 2-1: Product: Voyager GTX
[ +0.000001] usb 2-1: Manufacturer: Corsair
[ +0.000001] usb 2-1: SerialNumber: 511160602187700015
[ +0.006838] SCSI subsystem initialized
[ +0.001973] usbcore: registered new interface driver usb-storage
[ +0.002899] scsi host0: uas
[ +0.000087] usbcore: registered new interface driver uas
[ +0.000322] scsi 0:0:0:0: Direct-Access Corsair Voyager GTX 0 PQ: 0 ANSI: 6
[ +0.002925] sd 0:0:0:0: [sda] 450106372 512-byte logical blocks: (230 GB/215 GiB)
[ +0.000075] sd 0:0:0:0: [sda] Write Protect is off
[ +0.000001] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ +0.000169] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ +0.002807] sda: sda1 sda2 sda3 sda4 sda5
[ +0.000868] sd 0:0:0:0: [sda] Attached SCSI disk
[ +0.004617] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ +0.001718] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ +0.000324] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ +0.001890] fbcon: inteldrmfb (fb0) is primary device
[ +0.095356] usb 1-9: new full-speed USB device number 3 using xhci_hcd
[ +0.141991] usb 1-9: New USB device found, idVendor=06cb, idProduct=00bb, bcdDevice= 1.64
[ +0.000004] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ +0.000004] usb 1-9: SerialNumber: 728ba40777a1
[ +0.124675] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[ +0.142991] usb 1-10: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
[ +0.000005] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ +0.584705] Console: switching to colour frame buffer device 240x67
[ +0.015013] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ +0.082355] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ +0.075670] ISO 9660 Extensions: RRIP_1991A
[ +0.067638] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ +0.029759] overlayfs: fs on '/run/archiso/sfs/airootfs' does not support file handles, falling back to index=off,nfs_export=off.
[ +0.402173] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ +0.016589] systemd[1]: Detected architecture x86-64.
[ +0.008992] systemd[1]: Set hostname to <archiso>.
[ +0.000501] random: systemd: uninitialized urandom read (16 bytes read)
[ +0.000003] systemd[1]: Initializing machine ID from random generator.
[ +0.182009] random: systemd: uninitialized urandom read (16 bytes read)
[ +0.002820] systemd[1]: Listening on Process Core Dump Socket.
[ +0.000101] random: systemd: uninitialized urandom read (16 bytes read)
[ +0.001523] systemd[1]: Listening on LVM2 metadata daemon socket.
[ +0.000686] systemd[1]: Listening on udev Control Socket.
[ +0.001131] systemd[1]: Listening on LVM2 poll daemon socket.
[ +0.000776] systemd[1]: Created slice User and Session Slice.
[ +0.000068] systemd[1]: Reached target Slices.
[ +0.036993] audit: type=1130 audit(1543525635.500:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.002819] audit: type=1130 audit(1543525635.503:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.002319] audit: type=1130 audit(1543525635.506:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.018402] audit: type=1130 audit(1543525635.523:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.004743] audit: type=1130 audit(1543525635.530:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.001714] audit: type=1130 audit(1543525635.530:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.014391] audit: type=1130 audit(1543525635.546:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.005704] audit: type=1130 audit(1543525635.550:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.004776] systemd-journald[339]: Received request to flush runtime journal from PID 1
[ +0.016554] audit: type=1130 audit(1543525635.573:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.001998] audit: type=1130 audit(1543525635.573:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.071933] ACPI: AC Adapter [ADP1] (off-line)
[ +0.003789] input: HP Wireless hotkeys as /devices/virtual/input/input5
[ +0.010902] input: Intel HID events as /devices/platform/INT33D5:00/input/input6
[ +0.000100] intel-hid INT33D5:00: platform supports 5 button array
[ +0.000026] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input7
[ +0.039593] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ +0.000081] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ +0.029822] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ +0.001225] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ +0.046786] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ +0.018408] battery: ACPI: Battery Slot [BAT0] (battery present)
[ +0.001724] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ +0.005134] hidraw: raw HID events driver (C) Jiri Kosina
[ +0.011096] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 16)
[ +0.009907] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ +0.027514] media: Linux media interface: v0.10
[ +0.001324] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20180810/dsopcode-201)
[ +0.001655] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ +0.001614] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ +0.001851] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ +0.000002] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ +0.000001] RAPL PMU: hw unit of domain package 2^-14 Joules
[ +0.000001] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ +0.000001] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ +0.000001] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ +0.000219] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20180810/dsopcode-201)
[ +0.007689] Intel(R) Wireless WiFi driver for Linux
[ +0.000001] Copyright(c) 2003- 2015 Intel Corporation
[ +0.000062] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[ +0.004285] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ +0.021814] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ +0.002731] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20180810/dsopcode-201)
[ +0.002384] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ +0.003668] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ +0.001854] input: HP WMI hotkeys as /devices/virtual/input/input9
[ +0.000235] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20180810/dsopcode-201)
[ +0.001776] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ +0.001645] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ +0.000046] videodev: Linux video capture interface: v2.00
[ +0.000104] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ +0.000238] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ +0.001484] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20180810/dsopcode-201)
[ +0.001755] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ +0.001923] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ +0.009117] Bluetooth: Core ver 2.22
[ +0.000014] NET: Registered protocol family 31
[ +0.000001] Bluetooth: HCI device and connection manager initialized
[ +0.000004] Bluetooth: HCI socket layer initialized
[ +0.000002] Bluetooth: L2CAP socket layer initialized
[ +0.000005] Bluetooth: SCO socket layer initialized
[ +0.009397] iTCO_vendor_support: vendor-support=0
[ +0.023498] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ +0.001246] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC285: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ +0.000003] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ +0.000002] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ +0.000002] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ +0.000001] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ +0.000002] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ +0.009004] iTCO_wdt iTCO_wdt: can't request region for resource [mem 0x00c5fffc-0x00c5ffff]
[ +0.001960] iTCO_wdt: probe of iTCO_wdt failed with error -16
[ +0.019560] usbcore: registered new interface driver btusb
[ +0.023510] kvm: disabled by bios
[ +0.002144] Bluetooth: hci0: Firmware revision 0.1 build 113 week 38 2018
[ +0.016559] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ +0.000059] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ +0.000043] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ +0.000037] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ +0.000035] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ +0.000033] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ +0.000034] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ +0.002597] uvcvideo: Found UVC 1.50 device HP Wide Vision FHD Camera (0408:5251)
[ +0.047998] random: crng init done
[ +0.000002] random: 7 urandom warning(s) missed due to ratelimiting
[ +0.013899] iwlwifi 0000:00:14.3: loaded firmware version 38.755cfdd8.0 op_mode iwlmvm
[ +0.018567] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ +0.000003] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[ +0.000002] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ +0.000002] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ +0.000072] input: HP Wide Vision FHD Camera: HP W as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input17
[ +0.003954] uvcvideo: Found UVC 1.50 device HP Wide Vision FHD Camera (0408:5251)
[ +0.001745] intel_rapl: Found RAPL domain package
[ +0.000002] intel_rapl: Found RAPL domain core
[ +0.000001] intel_rapl: Found RAPL domain uncore
[ +0.000002] intel_rapl: Found RAPL domain dram
[ +0.015742] uvcvideo: Unable to create debugfs 1-2 directory.
[ +0.000097] uvcvideo 1-5:1.2: Entity type for entity Extension 4 was not initialized!
[ +0.000002] uvcvideo 1-5:1.2: Entity type for entity Extension 7 was not initialized!
[ +0.000002] uvcvideo 1-5:1.2: Entity type for entity Processing 2 was not initialized!
[ +0.000002] uvcvideo 1-5:1.2: Entity type for entity Camera 1 was not initialized!
[ +0.000076] input: HP Wide Vision FHD Camera: HP I as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input18
[ +0.000078] usbcore: registered new interface driver uvcvideo
[ +0.000000] USB Video Class driver (1.1.1)
[ +0.083221] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9560, REV=0x318
[ +0.011177] wl: loading out-of-tree module taints kernel.
[ +0.000003] wl: module license 'MIXED/Proprietary' taints kernel.
[ +0.000000] Disabling lock debugging due to kernel taint
[ +0.001158] wl: module verification failed: signature and/or required key missing - tainting kernel
[ +0.037371] iwlwifi 0000:00:14.3: base HW address: dc:8b:28:7f:43:d8
[ +0.070731] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ +0.000232] thermal thermal_zone7: failed to read out thermal zone (-61)
[ +0.002896] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
[ +0.055012] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=4
[ +0.237356] hid-generic 001F:8086:22D8.0001: hidraw0: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:22D8] on
[ +0.002482] hid-generic 001F:8086:22D8.0002: hidraw1: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:22D8] on
[ +0.001857] hid-generic 001F:8086:22D8.0003: hidraw2: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:22D8] on
[ +0.000726] hid-generic 001F:8086:22D8.0004: hidraw3: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:22D8] on
[ +4.416915] ucsi_acpi USBC000:00: PPM NOT RESPONDING
[ +0.027236] ucsi_acpi USBC000:00: PPM init failed (-110)
[ +0.256814] kauditd_printk_skb: 17 callbacks suppressed
[ +0.000001] audit: type=1131 audit(1543525641.340:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +2.179103] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
[ +0.000000] CPU6: Core temperature above threshold, cpu clock throttled (total events = 1)
[ +0.000002] CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
[ +0.000042] CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
[ +0.000001] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[ +0.000000] CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
[ +0.000001] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[ +0.000001] CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
[ +0.000001] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[ +0.000980] CPU1: Package temperature/speed normal
[ +0.000000] CPU4: Package temperature/speed normal
[ +0.000001] CPU5: Package temperature/speed normal
[ +0.000001] CPU0: Package temperature/speed normal
[ +0.000000] CPU7: Package temperature/speed normal
[ +0.000001] CPU3: Package temperature/speed normal
[ +0.000063] CPU2: Core temperature/speed normal
[ +0.000968] CPU6: Core temperature/speed normal
[ +0.655045] audit: type=1006 audit(1543525644.176:30): pid=483 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[ +0.016146] audit: type=1130 audit(1543525644.190:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.006965] audit: type=1006 audit(1543525644.200:32): pid=682 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ +0.046216] audit: type=1130 audit(1543525644.243:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.157861] audit: type=1130 audit(1543525644.403:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pacman-init comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +3.571273] thunderbolt 0000:04:00.0: stopping RX ring 0
[ +0.000006] thunderbolt 0000:04:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
[ +0.000006] thunderbolt 0000:04:00.0: stopping TX ring 0
[ +0.000005] thunderbolt 0000:04:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[ +0.000003] thunderbolt 0000:04:00.0: control channel stopped
[Nov29 21:11] NET: Registered protocol family 3
[ +0.238164] IPv6: ADDRCONF(NETDEV_UP): wlp0s20f3: link is not ready
[ +51.729459] IPv6: ADDRCONF(NETDEV_UP): wlp0s20f3: link is not ready
[ +0.293056] IPv6: ADDRCONF(NETDEV_UP): wlp0s20f3: link is not ready
[Nov29 21:12] wlp0s20f3: authenticate with c6:fb:5e:96:79:5e
[ +0.029352] wlp0s20f3: send auth to c6:fb:5e:96:79:5e (try 1/3)
[ +0.038133] wlp0s20f3: authenticated
[ +0.002001] wlp0s20f3: associate with c6:fb:5e:96:79:5e (try 1/3)
[ +0.003032] wlp0s20f3: RX AssocResp from c6:fb:5e:96:79:5e (capab=0x511 status=0 aid=27)
[ +0.003493] wlp0s20f3: associated
[ +0.008899] wlp0s20f3: Limiting TX power to 23 (23 - 0) dBm as advertised by c6:fb:5e:96:79:5e
[ +0.146079] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
[ +0.576097] 8021q: 802.1Q VLAN Support v1.8
[ +17.649070] EXT4-fs (sda4): error count since last fsck: 8
[ +0.000034] EXT4-fs (sda4): initial error at time 1542448498: ext4_ext_remove_space:2989: inode 891
[ +0.000022] EXT4-fs (sda4): last error at time 1542448498: ext4_evict_inode:293: inode 892
[Nov29 21:15] audit: type=1131 audit(1543526132.336:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.000553] audit: type=1130 audit(1543526132.336:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.000002] audit: type=1131 audit(1543526132.336:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.000517] audit: type=1130 audit(1543526132.336:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.017576] audit: type=1006 audit(1543526132.353:39): pid=1289 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=3 res=1
[Nov29 21:22] audit: type=1130 audit(1543526535.906:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ +0.000005] audit: type=1131 audit(1543526535.906:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment