Skip to content

Instantly share code, notes, and snippets.

@faddah

faddah/gist:67c5c0a5aca69cb4c9dd

Last active August 29, 2015 14:17
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save faddah/67c5c0a5aca69cb4c9dd to your computer and use it in GitHub Desktop.
Save faddah/67c5c0a5aca69cb4c9dd to your computer and use it in GitHub Desktop.
Download ZIP
results back from BeagleTerm
Raw
gistfile1.sh
# the result of ifconfig -a —
# ifconfig -a
eth0 Link encap:Ethernet HWaddr 6c:ec:eb:ad:34:1d
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:40
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
usb0 Link encap:Ethernet HWaddr c6:5c:31:10:1f:89
inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
# result of dmesg —
# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13-bone47 (root@imx6q-wandboard-2gb-0) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Fri Apr 11 01:36:09 UTC 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 130816
[ 0.000000] free_area_init_node: node 0, pgdat c0824280, node_mem_map c089f000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 129792 pages, LIFO batch:31
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c0caf000 s14080 r8192 d14592 u36864
[ 0.000000] pcpu-alloc: s14080 r8192 d14592 u36864 alloc=9*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
[ 0.000000] Kernel command line: console=tty0 console=ttyO0,115200n8 root=UUID=526b2f18-d079-4912-905c-8a2c534db734 ro rootfstype=ext4 rootwait fixrtc quiet init=/lib/systemd/systemd
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 1048576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 511MB = 511MB total
[ 0.000000] Memory: 505980k/505980k available, 18308k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0763c90 (7536 kB)
[ 0.000000] .init : 0xc0764000 - 0xc079f700 ( 238 kB)
[ 0.000000] .data : 0xc07a0000 - 0xc0827240 ( 541 kB)
[ 0.000000] .bss : 0xc0827240 - 0xc089e940 ( 478 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:0 nr_irqs:0 0
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000386] Calibrating delay loop... 993.47 BogoMIPS (lpj=969728)
[ 0.029177] pid_max: default: 32768 minimum: 301
[ 0.029322] Security Framework initialized
[ 0.029381] Mount-cache hash table entries: 512
[ 0.035524] Initializing cgroup subsys cpuacct
[ 0.035545] Initializing cgroup subsys memory
[ 0.035585] Initializing cgroup subsys blkio
[ 0.035677] CPU: Testing write buffer coherency: ok
[ 0.036067] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.036123] Setting up static identity map for 0x8045ed10 - 0x8045ed5c
[ 0.037155] Brought up 1 CPUs
[ 0.037170] SMP: Total of 1 processors activated (993.47 BogoMIPS).
[ 0.037910] devtmpfs: initialized
[ 0.046872] omap_hwmod: wd_timer2: _wait_target_disable failed
[ 0.099157] pinctrl core: initialized pinctrl subsystem
[ 0.099294] rstctl core: initialized rstctl subsystem
[ 0.099651] regulator-dummy: no parameters
[ 0.099979] NET: Registered protocol family 16
[ 0.100585] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.106335] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.106919] platform 49000000.edma: alias fck already exists
[ 0.106937] platform 49000000.edma: alias fck already exists
[ 0.106951] platform 49000000.edma: alias fck already exists
[ 0.107628] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.107726] OMAP GPIO hardware version 0.1
[ 0.108575] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.109331] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.110078] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.110350] of_get_named_gpio_flags exited with status 52
[ 0.110368] gpio-rctrl rstctl.4: loaded OK
[ 0.113726] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.114983] cpsw.0: No hwaddr in dt. Using 6c:ec:eb:ad:34:1d from efuse
[ 0.115001] cpsw.1: No hwaddr in dt. Using 6c:ec:eb:ad:34:1f from efuse
[ 0.123804] bio: create slab <bio-0> at 0
[ 0.130565] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.130755] of_get_named_gpio_flags: can't parse gpios property
[ 0.130893] vmmcsd_fixed: 3300 mV
[ 0.132531] SCSI subsystem initialized
[ 0.132825] usbcore: registered new interface driver usbfs
[ 0.132889] usbcore: registered new interface driver hub
[ 0.133093] usbcore: registered new device driver usb
[ 0.134329] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 0.135314] input: tps65217_pwr_but as /devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0
[ 0.136917] DCDC1: at 1500 mV
[ 0.137773] vdd_mpu: 925 <--> 1325 mV at 1325 mV
[ 0.138650] vdd_core: 925 <--> 1150 mV at 1125 mV
[ 0.139501] LDO1: at 1800 mV
[ 0.140314] LDO2: at 3300 mV
[ 0.141894] LDO3: 1800 mV
[ 0.142744] LDO4: at 3300 mV
[ 0.143482] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 0.143941] omap_i2c 44e0b000.i2c: unable to select pin group
[ 0.144465] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[ 0.145872] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.146018] media: Linux media interface: v0.10
[ 0.146084] Linux video capture interface: v2.00
[ 0.146160] pps_core: LinuxPPS API ver. 1 registered
[ 0.146169] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.146664] Advanced Linux Sound Architecture Driver Initialized.
[ 0.147268] NetLabel: Initializing
[ 0.147279] NetLabel: domain hash size = 128
[ 0.147286] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.147356] NetLabel: unlabeled traffic allowed by default
[ 0.147622] Switching to clocksource gp_timer
[ 0.180643] NET: Registered protocol family 2
[ 0.181373] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.181454] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[ 0.181537] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.181601] TCP: reno registered
[ 0.181616] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.181639] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.181889] NET: Registered protocol family 1
[ 0.182294] RPC: Registered named UNIX socket transport module.
[ 0.182305] RPC: Registered udp transport module.
[ 0.182313] RPC: Registered tcp transport module.
[ 0.182321] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.182556] Trying to unpack rootfs image as initramfs...
[ 0.381460] Freeing initrd memory: 2800K
[ 0.381859] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.382226] CPU PMU: attempt to register multiple PMU devices!
[ 0.382253] arm-pmu: probe of arm-pmu failed with error -28
[ 0.382579] omap2_mbox_probe: platform not supported
[ 0.544618] VFS: Disk quotas dquot_6.5.2
[ 0.544763] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.545503] NFS: Registering the id_resolver key type
[ 0.545573] Key type id_resolver registered
[ 0.545583] Key type id_legacy registered
[ 0.545871] fuse init (API version 7.20)
[ 0.546376] Btrfs loaded
[ 0.546494] msgmni has been set to 993
[ 0.548275] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.548292] io scheduler noop registered
[ 0.548301] io scheduler deadline registered
[ 0.548325] io scheduler cfq registered (default)
[ 0.549460] tps65217-bl tps65217-bl: no platform data provided
[ 0.549503] tps65217-bl: probe of tps65217-bl failed with error -22
[ 0.550129] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.551488] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 0.551777] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0
[ 0.563687] console [ttyO0] enabled
[ 0.564431] [drm] Initialized drm 1.1.0 20060810
[ 0.572267] brd: module loaded
[ 0.576359] loop: module loaded
[ 0.576450] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 0.576498] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 0.576536] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 0.576575] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 0.576613] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 0.583265] bone-capemgr bone_capemgr.9: Baseboard: 'A335BNLT,00C0,414BBBK0648\xffffffff'
[ 0.583290] bone-capemgr bone_capemgr.9: compatible-baseboard=ti,beaglebone-black
[ 0.614503] bone-capemgr bone_capemgr.9: slot #0: No cape found
[ 0.651610] bone-capemgr bone_capemgr.9: slot #1: No cape found
[ 0.688720] bone-capemgr bone_capemgr.9: slot #2: No cape found
[ 0.725827] bone-capemgr bone_capemgr.9: slot #3: No cape found
[ 0.732053] bone-capemgr bone_capemgr.9: slot #4: specific override
[ 0.732078] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 4
[ 0.732094] bone-capemgr bone_capemgr.9: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
[ 0.732180] bone-capemgr bone_capemgr.9: slot #5: specific override
[ 0.732200] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 5
[ 0.732215] bone-capemgr bone_capemgr.9: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
[ 0.732288] bone-capemgr bone_capemgr.9: slot #6: specific override
[ 0.732308] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 6
[ 0.732323] bone-capemgr bone_capemgr.9: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN'
[ 0.732661] bone-capemgr bone_capemgr.9: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[ 0.732677] bone-capemgr bone_capemgr.9: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[ 0.732757] bone-capemgr bone_capemgr.9: loader: before slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[ 0.732771] bone-capemgr bone_capemgr.9: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[ 0.732810] bone-capemgr bone_capemgr.9: initialized OK.
[ 0.734144] OneNAND driver initializing
[ 0.735025] usbcore: registered new interface driver cdc_ether
[ 0.735078] usbcore: registered new interface driver rndis_host
[ 0.735184] usbcore: registered new interface driver cdc_ncm
[ 0.735617] bone-capemgr bone_capemgr.9: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[ 0.735644] bone-capemgr bone_capemgr.9: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0'
[ 0.735663] bone-capemgr bone_capemgr.9: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
[ 0.735871] bone-capemgr bone_capemgr.9: slot #4: #2 overlays
[ 0.736454] bone-capemgr bone_capemgr.9: slot #4: Applied #2 overlays.
[ 0.736471] bone-capemgr bone_capemgr.9: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[ 0.736591] bone-capemgr bone_capemgr.9: loader: after slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[ 0.736615] bone-capemgr bone_capemgr.9: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0'
[ 0.736643] bone-capemgr bone_capemgr.9: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree
[ 0.737287] bone-capemgr bone_capemgr.9: slot #5: #4 overlays
[ 0.738719] platform 4830e000.fb: alias fck already exists
[ 0.739750] usbcore: registered new interface driver cdc_acm
[ 0.739761] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.739769] Initializing USB Mass Storage driver...
[ 0.739843] usbcore: registered new interface driver usb-storage
[ 0.739852] USB Mass Storage support registered.
[ 0.740014] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 0.740261] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 0.740277] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 0.740304] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 0.740315] musb-hdrc: MHDRC RTL version 2.0
[ 0.740323] musb-hdrc: setup fifo_mode 4
[ 0.740340] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 0.740426] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 0.740438] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 0.740875] bone-capemgr bone_capemgr.9: loader: before slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[ 0.740892] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[ 0.740910] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[ 0.740985] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 0.741000] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 0.741024] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 0.741034] musb-hdrc: MHDRC RTL version 2.0
[ 0.741041] musb-hdrc: setup fifo_mode 4
[ 0.741053] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 0.741122] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 0.741133] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 0.741145] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 0.741623] bone-capemgr bone_capemgr.9: slot #5: Applied #4 overlays.
[ 0.741640] bone-capemgr bone_capemgr.9: loader: done slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[ 0.741673] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[ 0.741690] bone-capemgr bone_capemgr.9: loader: after slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[ 0.741716] bone-capemgr bone_capemgr.9: slot #6: Requesting firmware 'cape-boneblack-hdmin-00A0.dtbo' for board-name 'Bone-Black-HDMIN', version '00A0'
[ 0.741745] bone-capemgr bone_capemgr.9: slot #6: dtbo 'cape-boneblack-hdmin-00A0.dtbo' loaded; converting to live tree
[ 0.741967] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI)
[ 0.751569] bone-capemgr bone_capemgr.9: slot #6: Failed verification
[ 0.758308] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[ 0.767960] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 0.767989] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 0.768059] usb usb1: default language 0x0409
[ 0.768093] usb usb1: udev 1, busnum 1, minor = 0
[ 0.768106] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.768117] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.768128] usb usb1: Product: MUSB HDRC host driver
[ 0.768138] usb usb1: Manufacturer: Linux 3.8.13-bone47 musb-hcd
[ 0.768149] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 0.768663] usb usb1: usb_probe_device
[ 0.768681] usb usb1: configuration #1 chosen from 1 choice
[ 0.768723] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 0.768895] hub 1-0:1.0: usb_probe_interface
[ 0.768908] hub 1-0:1.0: usb_probe_interface - got id
[ 0.768925] hub 1-0:1.0: USB hub found
[ 0.768950] hub 1-0:1.0: 1 port detected
[ 0.768961] hub 1-0:1.0: standalone hub
[ 0.768971] hub 1-0:1.0: individual port power switching
[ 0.768980] hub 1-0:1.0: no over-current protection
[ 0.768990] hub 1-0:1.0: Single TT
[ 0.769001] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 0.769011] hub 1-0:1.0: power on to power good time: 10ms
[ 0.769035] hub 1-0:1.0: local power source is good
[ 0.769103] hub 1-0:1.0: enabling power on all ports
[ 0.769761] mousedev: PS/2 mouse device common for all mice
[ 0.771369] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 0.771577] i2c /dev entries driver
[ 0.772607] pps_ldisc: PPS line discipline registered
[ 0.772756] Driver for 1-wire Dallas network protocol.
[ 0.773952] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 0.774368] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 0.774405] cpuidle: using governor ladder
[ 0.774414] cpuidle: using governor menu
[ 0.774729] of_get_named_gpio_flags exited with status 6
[ 0.774741] of_get_named_gpio_flags: can't parse gpios property
[ 0.774749] of_get_named_gpio_flags: can't parse gpios property
[ 0.774772] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed
[ 0.781982] omap_hsmmc mmc.5: Failed to get rstctl; not using any
[ 0.782537] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 0.782595] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 0.782771] mmc.5 supply vmmc_aux not found, using dummy regulator
[ 0.783115] omap_hsmmc mmc.5: pins are not configured from the driver
[ 0.809987] of_get_named_gpio_flags: can't parse gpios property
[ 0.810000] of_get_named_gpio_flags: can't parse gpios property
[ 0.810009] of_get_named_gpio_flags: can't parse gpios property
[ 0.810043] gpio-rctrl rstctl.4: gpio_rctrl_request eMMC_RSTn
[ 0.810109] omap_hsmmc mmc.11: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn
[ 0.810120] gpio-rctrl rstctl.4: gpio_rctrl_deassert eMMC_RSTn
[ 0.810327] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
[ 0.810373] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
[ 0.810720] mmc.11 supply vmmc_aux not found, using dummy regulator
[ 0.810793] omap_hsmmc mmc.11: pins are not configured from the driver
[ 0.837429] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
[ 0.849133] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
[ 0.856415] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[ 0.865354] leds-gpio gpio-leds.8: pins are not configured from the driver
[ 0.865380] of_get_named_gpio_flags exited with status 53
[ 0.865392] of_get_named_gpio_flags exited with status 54
[ 0.865404] of_get_named_gpio_flags exited with status 55
[ 0.865415] of_get_named_gpio_flags exited with status 56
[ 0.865430] of_get_named_gpio_flags exited with status 53
[ 0.865572] of_get_named_gpio_flags exited with status 54
[ 0.865753] of_get_named_gpio_flags exited with status 55
[ 0.865862] of_get_named_gpio_flags exited with status 56
[ 0.866206] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.866504] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 0.866564] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 0.867868] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 0.867951] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 0.867998] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 0.870524] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 0.870577] hub 1-0:1.0: hub_suspend
[ 0.870604] usb usb1: bus auto-suspend, wakeup 1
[ 0.871456] usbcore: registered new interface driver usbhid
[ 0.871467] usbhid: USB HID core driver
[ 0.872503] ashmem: initialized
[ 0.872721] logger: created 256K log 'log_main'
[ 0.872915] logger: created 256K log 'log_events'
[ 0.873118] logger: created 256K log 'log_radio'
[ 0.873312] logger: created 256K log 'log_system'
[ 0.875250] of_get_named_gpio_flags exited with status 59
[ 0.876096] davinci_evm sound.14: nxp-hdmi-hifi <-> 48038000.mcasp mapping ok
[ 0.878429] TCP: cubic registered
[ 0.878513] NET: Registered protocol family 10
[ 0.879565] NET: Registered protocol family 17
[ 0.879888] Key type dns_resolver registered
[ 0.880256] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 0.880321] ThumbEE CPU extension supported.
[ 0.880355] Registering SWP/SWPB emulation handler
[ 0.881096] registered taskstats version 1
[ 0.882812] of_get_named_gpio_flags: can't parse gpios property
[ 0.882833] tilcdc 4830e000.fb: No power control GPIO
[ 0.921053] mmc1: BKOPS_EN bit is not set
[ 0.924862] mmc1: new high speed MMC card at address 0001
[ 0.925432] mmcblk0: mmc1:0001 MMC04G 3.60 GiB
[ 0.925658] mmcblk0boot0: mmc1:0001 MMC04G partition 1 2.00 MiB
[ 0.925864] mmcblk0boot1: mmc1:0001 MMC04G partition 2 2.00 MiB
[ 0.926897] mmcblk0: p1 p2
[ 0.928661] mmcblk0boot1: unknown partition table
[ 0.929963] mmcblk0boot0: unknown partition table
[ 0.997852] tilcdc 4830e000.fb: found TDA19988
[ 0.998454] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.998463] [drm] No driver support for vblank timestamp query.
[ 0.998762] tilcdc 4830e000.fb: No connectors reported connected with modes
[ 0.998780] [drm] Cannot find any crtc or sizes - going 1024x768
[ 1.007784] Console: switching to colour frame buffer device 128x48
[ 1.013624] tilcdc 4830e000.fb: fb0: frame buffer device
[ 1.013635] tilcdc 4830e000.fb: registered panic notifier
[ 1.013663] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[ 1.061783] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 1.061802] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 1.068591] libphy: 4a101000.mdio: probed
[ 1.068619] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 1.068803] Detected MACID = 6c:ec:eb:ad:34:1d
[ 1.068905] cpsw 4a100000.ethernet: NAPI disabled
[ 1.070234] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[ 1.075121] ALSA device list:
[ 1.075141] #0: TI BeagleBone Black
[ 1.075880] Freeing init memory: 236K
[ 1.152596] udevd[98]: starting version 175
[ 2.340210] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 2.340229] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 2.623804] EXT4-fs (mmcblk0p2): recovery complete
[ 2.625188] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.525033] rtusb init rt2870 --->
[ 3.525168] usbcore: registered new interface driver rt2870
[ 3.730599] udevd[227]: starting version 175
[ 4.686030] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[ 13.766402] gadget: using random self ethernet address
[ 13.775352] usb0: MAC c6:5c:31:10:1f:89
[ 13.775371] usb0: HOST MAC 6c:ec:eb:ad:34:1f
[ 13.784594] gadget: Mass Storage Function, version: 2009/09/11
[ 13.784615] gadget: Number of LUNs=1
[ 13.784638] lun0: LUN: removable file: /dev/mmcblk0p1
[ 13.784783] gadget: Multifunction Composite Gadget
[ 13.784810] gadget: g_multi ready
[ 13.784852] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
[ 13.785173] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2
[ 13.785202] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup
[ 13.785275] usb usb2: default language 0x0409
[ 13.785310] usb usb2: udev 1, busnum 2, minor = 128
[ 13.785324] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 13.785336] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.785347] usb usb2: Product: MUSB HDRC host driver
[ 13.785358] usb usb2: Manufacturer: Linux 3.8.13-bone47 musb-hcd
[ 13.785368] usb usb2: SerialNumber: musb-hdrc.0.auto
[ 13.788018] usb usb2: usb_probe_device
[ 13.788040] usb usb2: configuration #1 chosen from 1 choice
[ 13.788094] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 13.788234] hub 2-0:1.0: usb_probe_interface
[ 13.788248] hub 2-0:1.0: usb_probe_interface - got id
[ 13.788269] hub 2-0:1.0: USB hub found
[ 13.788295] hub 2-0:1.0: 1 port detected
[ 13.794615] hub 2-0:1.0: standalone hub
[ 13.794638] hub 2-0:1.0: individual port power switching
[ 13.794649] hub 2-0:1.0: no over-current protection
[ 13.794659] hub 2-0:1.0: Single TT
[ 13.794672] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 13.794682] hub 2-0:1.0: power on to power good time: 10ms
[ 13.794727] hub 2-0:1.0: local power source is good
[ 13.797056] hub 2-0:1.0: enabling power on all ports
[ 13.897900] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 13.897963] hub 2-0:1.0: hub_suspend
[ 13.897991] usb usb2: bus auto-suspend, wakeup 1
[ 16.150154] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 25.168240] net eth0: initializing cpsw version 1.12 (0)
[ 25.172688] net eth0: phy found : id is : 0x7c0f1
[ 25.172751] libphy: PHY 4a101000.mdio:01 not found
[ 25.178029] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 25.194246] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment