Setup WiFi Explorer Pro Remote Sensor on Ubuntu Server 23.10 arm64

setup-remote-sensor.sh

#!/bin/bash

# ref: https://intuitibits.com/help/wifiexplorerpro3/#/topic-en.lproj-connect_remote_sensor

cd "$HOME"

sudo apt update
sudo apt install iproute2 iw

# for Active Mode
sudo apt install git build-essential libnl-genl-3-dev libpcap-dev
git clone https://github.com/intuitibits/scandump.git
pushd scandump
make
sudo make install
popd

# for Passive Mode
sudo apt install aircrack-ng tcpdump wpasupplicant

echo "%sudo ALL=(ALL) NOPASSWD: $(which poweroff), $(which reboot), $(which iw), $(which ip), $(which tcpdump), $(which wpa_cli), $(which airmon-ng), $(which scandump)" |\
  sudo tee /etc/sudoers.d/wlandump
sudo chmod -w /etc/sudoers.d/wlandump

# update regulatory.db
sudo mv /usr/lib/firmware/regulatory.db{,.backup}
sudo mv /usr/lib/firmware/regulatory.db.p7s{,.backup}
wget https://mirrors.edge.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2023.02.13.tar.gz
tar xvf wireless-regdb-2023.02.13.tar.gz
sudo cp wireless-regdb-2023.02.13/regulatory{.db,.db.p7s} /usr/lib/firmware/