RaspberryPi-IgnitionKey

RaspberryPi-IgnitionKey.ino

#include "DigiKeyboard.h"
// This sketch is used to do the initial setup on 
// a freshly installed Raspberry Pi: Upload it to a
// Digispark board, and connect it to your Arduino.
// It will log in using 'pi'/'raspberry' and execute
// 'sudo systemctl enable ssh' and '...start ssh'

const int def_delay = 125;

void setup() {
  DigiKeyboard.delay(def_delay);
  DigiKeyboard.sendKeyStroke(KEY_ENTER);
  DigiKeyboard.delay(def_delay);
  type("pi");  
  type("raspberry");  
 
  DigiKeyboard.delay(10*def_delay);
  type("sudo systemctl enable ssh");  
  type("sudo systemctl start ssh");  

  DigiKeyboard.delay(5*def_delay);
  // Emit a 'beep' so we know we can remove the key
  // Connect headphones to hear it :)
  type("speaker-test -t sine -c 2 -s 2 -f 440");  
  type("logout");  
}

void loop() {

}

void type(char* text) {
  DigiKeyboard.println(text);  
  DigiKeyboard.sendKeyStroke(KEY_ENTER);
  DigiKeyboard.delay(def_delay);
}