Last active
February 18, 2024 15:10
-
-
Save felixhummel/e044f5947a3e8f4b13f4579804c3a1ac to your computer and use it in GitHub Desktop.
2024-02 hdparm -I
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /dev/disk/by-id/ata-TOSHIBA_MG08ACA16TE_14W0A05NFWTG: | |
| ATA device, with non-removable media | |
| Model Number: TOSHIBA MG08ACA16TE | |
| Serial Number: 14W0A05NFWTG | |
| Firmware Revision: 4305 | |
| Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0 | |
| Standards: | |
| Used: unknown (minor revision code 0x006d) | |
| Supported: 10 9 8 7 6 5 | |
| Likely used: 10 | |
| Configuration: | |
| Logical max current | |
| cylinders 16383 16383 | |
| heads 16 16 | |
| sectors/track 63 63 | |
| -- | |
| CHS current addressable sectors: 16514064 | |
| LBA user addressable sectors: 268435455 | |
| LBA48 user addressable sectors: 31251759104 | |
| Logical Sector size: 512 bytes | |
| Physical Sector size: 4096 bytes | |
| Logical Sector-0 offset: 0 bytes | |
| device size with M = 1024*1024: 15259648 MBytes | |
| device size with M = 1000*1000: 16000900 MBytes (16000 GB) | |
| cache/buffer size = unknown | |
| Form Factor: 3.5 inch | |
| Nominal Media Rotation Rate: 7200 | |
| Capabilities: | |
| LBA, IORDY(can be disabled) | |
| Queue depth: 32 | |
| Standby timer values: spec'd by Standard, no device specific minimum | |
| R/W multiple sector transfer: Max = 16 Current = 16 | |
| Advanced power management level: 128 | |
| DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 | |
| Cycle time: min=120ns recommended=120ns | |
| PIO: pio0 pio1 pio2 pio3 pio4 | |
| Cycle time: no flow control=120ns IORDY flow control=120ns | |
| Commands/features: | |
| Enabled Supported: | |
| * SMART feature set | |
| Security Mode feature set | |
| * Power Management feature set | |
| * Write cache | |
| * Look-ahead | |
| * WRITE_BUFFER command | |
| * READ_BUFFER command | |
| * NOP cmd | |
| * DOWNLOAD_MICROCODE | |
| * Advanced Power Management feature set | |
| * 48-bit Address feature set | |
| * Mandatory FLUSH_CACHE | |
| * FLUSH_CACHE_EXT | |
| * SMART error logging | |
| * SMART self-test | |
| * General Purpose Logging feature set | |
| * WRITE_{DMA|MULTIPLE}_FUA_EXT | |
| * 64-bit World wide name | |
| * WRITE_UNCORRECTABLE_EXT command | |
| * {READ,WRITE}_DMA_EXT_GPL commands | |
| * Segmented DOWNLOAD_MICROCODE | |
| * unknown 119[6] | |
| unknown 119[7] | |
| unknown 119[8] | |
| * Gen1 signaling speed (1.5Gb/s) | |
| * Gen2 signaling speed (3.0Gb/s) | |
| * Gen3 signaling speed (6.0Gb/s) | |
| * Native Command Queueing (NCQ) | |
| * Host-initiated interface power management | |
| * Phy event counters | |
| * NCQ priority information | |
| * Host automatic Partial to Slumber transitions | |
| * Device automatic Partial to Slumber transitions | |
| * READ_LOG_DMA_EXT equivalent to READ_LOG_EXT | |
| * DMA Setup Auto-Activate optimization | |
| Device-initiated interface power management | |
| * Software settings preservation | |
| unknown 78[7] | |
| * SMART Command Transport (SCT) feature set | |
| * SCT Write Same (AC2) | |
| * SCT Error Recovery Control (AC3) | |
| * SCT Features Control (AC4) | |
| * SCT Data Tables (AC5) | |
| * SANITIZE_ANTIFREEZE_LOCK_EXT command | |
| * SANITIZE feature set | |
| * OVERWRITE_EXT command | |
| * Extended number of user addressable sectors | |
| * DOWNLOAD MICROCODE DMA command | |
| Security: | |
| Master password revision code = 65534 | |
| supported | |
| not enabled | |
| not locked | |
| frozen | |
| not expired: security count | |
| supported: enhanced erase | |
| 1330min for SECURITY ERASE UNIT. 1330min for ENHANCED SECURITY ERASE UNIT. | |
| Logical Unit WWN Device Identifier: 5000039d08caef4b | |
| NAA : 5 | |
| IEEE OUI : 000039 | |
| Unique ID : d08caef4b | |
| Checksum: correct |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /dev/disk/by-id/ata-TOSHIBA_MG08ACA16TE_93K0A0DPFVGG: | |
| ATA device, with non-removable media | |
| Model Number: TOSHIBA MG08ACA16TE | |
| Serial Number: 93K0A0DPFVGG | |
| Firmware Revision: 0103 | |
| Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0 | |
| Standards: | |
| Used: unknown (minor revision code 0x006d) | |
| Supported: 10 9 8 7 6 5 | |
| Likely used: 10 | |
| Configuration: | |
| Logical max current | |
| cylinders 16383 16383 | |
| heads 16 16 | |
| sectors/track 63 63 | |
| -- | |
| CHS current addressable sectors: 16514064 | |
| LBA user addressable sectors: 268435455 | |
| LBA48 user addressable sectors: 31251759104 | |
| Logical Sector size: 512 bytes | |
| Physical Sector size: 4096 bytes | |
| Logical Sector-0 offset: 0 bytes | |
| device size with M = 1024*1024: 15259648 MBytes | |
| device size with M = 1000*1000: 16000900 MBytes (16000 GB) | |
| cache/buffer size = unknown | |
| Form Factor: 3.5 inch | |
| Nominal Media Rotation Rate: 7200 | |
| Capabilities: | |
| LBA, IORDY(can be disabled) | |
| Queue depth: 32 | |
| Standby timer values: spec'd by Standard, no device specific minimum | |
| R/W multiple sector transfer: Max = 16 Current = 16 | |
| Advanced power management level: 128 | |
| DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 | |
| Cycle time: min=120ns recommended=120ns | |
| PIO: pio0 pio1 pio2 pio3 pio4 | |
| Cycle time: no flow control=120ns IORDY flow control=120ns | |
| Commands/features: | |
| Enabled Supported: | |
| * SMART feature set | |
| Security Mode feature set | |
| * Power Management feature set | |
| * Write cache | |
| * Look-ahead | |
| * WRITE_BUFFER command | |
| * READ_BUFFER command | |
| * NOP cmd | |
| * DOWNLOAD_MICROCODE | |
| * Advanced Power Management feature set | |
| * 48-bit Address feature set | |
| * Mandatory FLUSH_CACHE | |
| * FLUSH_CACHE_EXT | |
| * SMART error logging | |
| * SMART self-test | |
| * General Purpose Logging feature set | |
| * WRITE_{DMA|MULTIPLE}_FUA_EXT | |
| * 64-bit World wide name | |
| * WRITE_UNCORRECTABLE_EXT command | |
| * {READ,WRITE}_DMA_EXT_GPL commands | |
| * Segmented DOWNLOAD_MICROCODE | |
| * unknown 119[6] | |
| unknown 119[7] | |
| unknown 119[8] | |
| * Gen1 signaling speed (1.5Gb/s) | |
| * Gen2 signaling speed (3.0Gb/s) | |
| * Gen3 signaling speed (6.0Gb/s) | |
| * Native Command Queueing (NCQ) | |
| * Host-initiated interface power management | |
| * Phy event counters | |
| * NCQ priority information | |
| * Host automatic Partial to Slumber transitions | |
| * Device automatic Partial to Slumber transitions | |
| * READ_LOG_DMA_EXT equivalent to READ_LOG_EXT | |
| * DMA Setup Auto-Activate optimization | |
| Device-initiated interface power management | |
| * Software settings preservation | |
| unknown 78[7] | |
| * SMART Command Transport (SCT) feature set | |
| * SCT Write Same (AC2) | |
| * SCT Error Recovery Control (AC3) | |
| * SCT Features Control (AC4) | |
| * SCT Data Tables (AC5) | |
| * SANITIZE_ANTIFREEZE_LOCK_EXT command | |
| * SANITIZE feature set | |
| * OVERWRITE_EXT command | |
| * Extended number of user addressable sectors | |
| * DOWNLOAD MICROCODE DMA command | |
| Security: | |
| Master password revision code = 65534 | |
| supported | |
| not enabled | |
| not locked | |
| frozen | |
| not expired: security count | |
| supported: enhanced erase | |
| 1304min for SECURITY ERASE UNIT. 1304min for ENHANCED SECURITY ERASE UNIT. | |
| Logical Unit WWN Device Identifier: 5000039cc8cb795b | |
| NAA : 5 | |
| IEEE OUI : 000039 | |
| Unique ID : cc8cb795b | |
| Checksum: correct |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| root@enterprise ~ # hdparm -B 127 -S 242 /dev/disk/by-id/ata-TOSHIBA_MG08ACA16TE_14W0A05NFWTG /dev/disk/by-id/ata-TOSHIBA_MG08ACA16TE_93K0A0DPFVGG | |
| /dev/disk/by-id/ata-TOSHIBA_MG08ACA16TE_14W0A05NFWTG: | |
| setting Advanced Power Management level to 0x7f (127) | |
| setting standby to 242 (1 hour) | |
| APM_level = 127 | |
| /dev/disk/by-id/ata-TOSHIBA_MG08ACA16TE_93K0A0DPFVGG: | |
| setting Advanced Power Management level to 0x7f (127) | |
| setting standby to 242 (1 hour) | |
| APM_level = 127 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment