ferrouswheel/README.md

## README.md

      
    Raw
  

              README.md
            
          
    PostgreSQL & PostGIS Cheatsheet

This is a collection of information on PostgreSQL and PostGIS for what I tend to use most often.
TOC


Installing Postgres & PostGIS
Using Postgres on the command line: PSQL
Importing Data into Postgres
Exporting Data from Postgres
Joining Tables
Upgrading Postgres
PostGIS common commands
Common PostGIS spatial queries
Spatial Indexing
Importing spatial data into PostGIS
Exporting spatial data from PostGIS
Other Methods of Interacting With Postgres/PostGIS

Installation

Postgres


to install on Ubuntu do: apt-get install postgresql


to install on Mac OS X first install homebrew and then do brew install postgresql


to install on Windows...


Note that for OS X and Ubuntu you may need to run the above commands as a super user / using sudo.
Set Up

On Ubuntu you typically need to log in as the Postgres user and do some admin things:

log in as postgres: sudo -i -u postgres
create a new user: createuser --interactive
type the name of the new user (no spaces!), typically the same name as your linux user that isn't root. You can add a new linux user by doing adduser username.
typically you want the user to have super-user privileges, so type y when asked.
create a new database that has the same name as the new user: createdb username

For Mac OS X you can skip the above if you install with homebrew.
For Windows....
Starting the Postgres Database

On Mac OS X:


to start the Postgres server do: postgres -D /usr/local/var/postgres


or do pg_ctl -D /usr/local/var/postgres -l /usr/local/var/postgres/server.log start to start and pg_ctl -D /usr/local/var/postgres -l /usr/local/var/postgres/server.log stop to stop


to have Postgres start everytime you boot your Mac do: ln -sfv /usr/local/opt/postgresql/*.plist ~/Library/LaunchAgents then to check that it's working after booting do: ps ax | grep sql


PostGIS


On Ubuntu do apt-get install postgis


On Mac OS X the easiest method is via homebrew: brew install postgis

(note that if you don't have Postgres or GDAL installed already it will automatically install these first).


to install on Windows...


psql

psql is the interactive unix command line tool for interacting with Postgres/PostGIS.
Common Commands


log-in / connect to a database name by doing psql -d db_name


for doing admin type things such as managing db users, log in as the postgres user: psql postgres;


to create a database: CREATE DATABASE database-name;


to connect to a database: \c database-name;


to delete a database DROP DATABASE database-name;


to connect when starting psql use the -d flag like: psql -d nyc_noise


to list all databases: \l


to quit psql: \q


to grant privileges to a user (requires logging in as postgres ):
GRANT ALL PRIVILEGES ON DATABASE mydb TO myuser;


to enable the hstore extension ( for key : value pairs, useful when working with OpenStreetMap data) do: CREATE EXTENSION hstore


to view columns of a table: \d table_name


to list all columns in a table (helpful when you have a lot of columns!):

select column_name from information_schema.columns where table_name = 'my_table' order by column_name asc;


to rename a column:

alter table noise.hoods rename column noise_sqkm to complaints_sqkm;


to change a column's data type:

alter table noise.hoods alter column noise_area type float;


to compute values from two columns and assign them to another column: update noise.hoods set noise_area = noise/(area/1000);


to search by wildcard use the like (case sensitive) or ilike (treats everything as lowercase) command:

SELECT count(*) from violations where inspection_date::text ilike '2014%';


to insert data into a table:
INSERT INTO table_name (column1, column2)
VALUES
	(value1, value2);


to insert data from another table:
INSERT INTO table_name (value1, value2)
SELECT column1, column2
FROM other_table_name


to remove rows using a where clause:

DELETE FROM table_name WHERE some_column = some_value


list all column names from a table in alphabetical order:
select column_name
from information_schema.columns
where table_schema = 'public'
and table_name = 'bk_pluto'
order by column_name;


List data from a column as a single row, comma separated:

SELECT array_to_string( array( SELECT id FROM table ), ',' )
SELECT string_agg(id, ',') FROM table


rename an existing table:

ALTER TABLE table_name RENAME TO table_name_new;


rename an existing column of a table:

ALTER TABLE table_name RENAME COLUMN column_name TO column_new_name;


Find duplicate rows in a table based on values from two fields:
 select * from (
   SELECT id,
   ROW_NUMBER() OVER(PARTITION BY merchant_Id, url ORDER BY id asc) AS Row
   FROM Photos
 ) dups
 where 
 dups.Row > 1

credit: MatthewJ on stack-exchange


Bulk Queries are efficient when doing multiple inserts or updates of different values:
 UPDATE election_results o
 SET votes=n.votes, pro=n.pro
 FROM (VALUES (1,11,9),
              (2,44,28),
              (3,25,4)
       ) n(county_id,votes,pro)
 WHERE o.county_id = n.county_id;

 INSERT INTO election_results (county_id,voters,pro)
 VALUES  (1, 11,8),
         (12,21,10),
         (78,31,27);    

WITH
-- write the new values
n(ip,visits,clicks) AS (
  VALUES ('192.168.1.1',2,12),
         ('192.168.1.2',6,18),
         ('192.168.1.3',3,4)
),
-- update existing rows
upsert AS (
  UPDATE page_views o
  SET visits=n.visits, clicks=n.clicks
  FROM n WHERE o.ip = n.ip
  RETURNING o.ip
)
-- insert missing rows
INSERT INTO page_views (ip,visits,clicks)
SELECT n.ip, n.visits, n.clicks FROM n
WHERE n.ip NOT IN (
  SELECT ip FROM upsert
);    


Importing Data


import data from a CSV file using the COPY command:
 COPY noise.locations (name, complaint, descript, boro, lat, lon)
 FROM '/Users/chrislhenrick/tutorials/postgresql/data/noise.csv' WITH CSV HEADER;


import a CSV file "AS IS" using csvkit's csvsql (requires python, pip, csvkit, psycopg2):
 csvsql --db postgresql:///nyc_pluto --insert 2012_DHCR_Bldg.csv


Exporting Data


export data as a CSV with Headers using COPY:
 COPY dob_jobs_2014 to '/Users/chrislhenrick/development/nyc_dob_jobs/data/2014/dob_jobs_2014.csv' DELIMITER ',' CSV Header;


to the current workspace without saving to a file:
 COPY (SELECT foo FROM bar) TO STDOUT CSV HEADER;


from the command line w/o connecting to postgres:
 psql -d dbname -t -A -F"," -c "select * from table_name" > output.csv


Joining Tables Using a Shared Key

From CartoDB's tutorial Join data from two tables using SQL


Join two tables that share a key using an INNER JOIN(Postgresql's default join type):
 SELECT table_1.the_geom,table_1.iso_code,table_2.population
 FROM table_1, table_2
 WHERE table_1.iso_code = table_2.iso


To update a table's data based on that of a join:
 UPDATE table_1 as t1
 SET population = (
   SELECT population
   FROM table_2
   WHERE iso = t1.iso_code
   LIMIT 1
 )


aggregate data on a join (if table 2 has multiple rows for a unique identifier):
 SELECT
   table_1.the_geom,
   table_1.iso_code,
   SUM(table_2.total) as total
 FROM table_1, table_2
 WHERE table_1.iso_code = table_2.iso
 GROUP BY table_1.iso_code, table_2.iso


update the value of a column based on the aggregate join:
 UPDATE table_1 as t1
 SET total =  (
   SELECT SUM(total)
   FROM table_2
   WHERE iso = t1.iso_code
   GROUP BY iso
 )


Upgrading Postgres

This Tutorial was very helpful for upgrading on Mac OS X via homebrew.
WARNING: Back up your data before doing this incase you screw up like I did!
Basically the steps are:


Shut down Postgresql:

launchctl unload ~/Library/LaunchAgents/homebrew.mxcl.postgresql.plist


Create a new Postgresql9.x data directory:

initdb /usr/local/var/postgres9.4 -E utf8


Run the pg_upgrade command:
pg_upgrade \
-d /usr/local/var/postgres \
-D /usr/local/var/postgres9.4 \
-b /usr/local/Cellar/postgresql/9.3.5_1/bin/ \
-B /usr/local/Cellar/postgresql/9.4.0/bin/ \
-v


Change kernel settings if necessary:
sudo sysctl -w kern.sysv.shmall=65536
sudo sysctl -w kern.sysv.shmmax=16777216


I also ran sudo vi /etc/sysctl.conf and entered the same values:

kern.sysv.shmall=65536
kern.sysv.shmmax=16777216


re-run the pg_upgrade command in step 3


Move the new data directory into place:
cd /usr/local/var
mv postgres postgres9.2.4
mv postgres9.3 postgres


Start the new version of PostgreSQL:
launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.postgresql.plist

check to make sure it worked:

psql postgres -c "select version()"
psql -l


Cleanup:

vacuumdb --all --analyze-only
analyze_new_cluster.sh*
delete_old_cluster.sh*
brew cleanup postgresql

(* scripts were generated in same the directory where pg_upgrade was ran)


PostGIS

PostGIS is the extension for Postgres that allows for working with geometry data types and doing GIS operations in Postgres.
Common Commands


to enable PostGIS in a Postgres database do: CREATE EXTENSION postgis;


to enable PostGIS topology do: CREATE EXTENSION postgis_topology;


to support OSM tags do: CREATE EXTENSION hstore;


create a new table for data from a CSV that has lat and lon columns:
create table noise.locations
(                                     
  name varchar(100),
  complaint varchar(100), descript varchar(100),
  boro varchar(50),
  lat float8,
  lon float8,
  geom geometry(POINT, 4326)
);


inputing values for the geometry type after loading data from a CSV:

update noise.locations set the_geom = ST_SetSRID(ST_MakePoint(lon, lat), 4326);


adding a geometry column in a non-spatial table:

select addgeometryColumn('table_name', 'geom', 4326, 'POINT', 2);


calculating area in EPSG 4326:

alter table noise.hoods set area = (select ST_Area(geom::geography));


Common Spatial Queries

You may view more of these in my intro to Visualizing Geospatial Data with CartoDB.
Find all polygons from dataset A that intersect points from dataset B:
SELECT a.* 
FROM table_a_polygons a, table_b_points b
WHERE ST_Intersects(a.the_geom, b.the_geom);

Find all rows in a polygon dataset that intersect a given point:
-- note: geometry for point must be in the order lon, lat (x, y)
SELECT * FROM nyc_tenants_rights_service_areas
where 
ST_Intersects(
  ST_GeomFromText(
   'Point(-73.982557 40.724435)', 4326
  ),
  nyc_tenants_rights_service_areas.the_geom    
);

Or using ST_Contains:
SELECT * FROM nyc_tenants_rights_service_areas
where 
st_contains(
  nyc_tenants_rights_service_areas.the_geom,
  ST_GeomFromText(
   'Point(-73.917104 40.694827)', 4326
  )      
);

Counting points inside a polygon:
With ST_Containts():
SELECT us_counties.the_geom_webmercator,us_counties.cartodb_id,
count(quakes.the_geom)
AS total
FROM us_counties JOIN quakes
ON st_contains(us_counties.the_geom,quakes.the_geom)
GROUP BY us_counties.cartodb_id;

To update a column from table A with the number of points from table B that intersect table A's polygons:
update noise.hoods set num_complaints = (
	select count(*)
	from noise.locations
	where
	ST_Intersects(
		noise.locations.geom,
		noise.hoods.geom
	)
);

Make a line from a series of points
SELECT ST_MakeLine (the_geom ORDER BY id ASC)
AS the_geom, route
FROM points_table
GROUP BY route;

Order points in a table by distance to a given lat lon

This one uses CartoDB's built-in function CDB_LatLng which is short hand for doing:

SELECT ST_Transform( ST_GeomFromText( 'Point(-73.982557 40.724435)',),4326)
SELECT * FROM table
ORDER BY the_geom <->
CDB_LatLng(42.5,-73) LIMIT 10;

Access the previous row of data and get value (time, value, number, etc) difference
WITH calc_duration AS (
 SELECT
 cartodb_id,
 extract(epoch FROM (date_time - lag(date_time,1) OVER(ORDER BY date_time))) AS
duration_in_seconds
 FROM tracking_eric
 ORDER BY date_time
)
UPDATE tracking_eric
SET duration_in_seconds = calc_duration.duration_in_seconds
FROM calc_duration
WHERE calc_duration.cartodb_id = tracking_eric.cartodb_id

select population density by county
In this one we cast the geometry data type to the geography data type to get units of measure in meters.
SELECT pop_sqkm,
 round( pop / (ST_Area(the_geom::geography)/1000000))
 as psqkm
 FROM us_counties

Spatial Indexing

Makes queries hella fast. OSGeo has a good tutorial.

Basically the steps are:

CREATE INDEX table_name_gix ON table_name USING GIST (geom);

VACUUM ANALYZE table_name

CLUSTER table_name USING table_name_gix;

*Do this every time after making changes to your dataset or importing new data.

Importing Spatial Data to PostGIS

Using shp2pgsql


Do:

shp2pgsql -I -s 4326 nyc-pediacities-hoods-v3-edit.shp noise.hoods > noise.sql

Or for using the geography data type do:

shp2pgsql -G -I nyc-pediacities-hoods-v3-edit.shp noise.nyc-pediacities-hoods-v3-edit_geographic > nyc_pediacities-hoods-v3-edit.sql


Do:

psql -d nyc_noise -f noise.sql

Or for the geography type above:

psql -d nyc_noise -f nyc_pediacities-hoods-v3-edit.sql 


Using osm2pgsql

To import an OpenStreetMap extract in PBF format do:

osm2pgsql -H localhost --hstore-all -d nyc_from_osm ~/Downloads/newyorkcity.osm.pbf
Using ogr2ogr

Example importing a GeoJSON file into a database called nyc_pluto:
ogr2ogr -f PostgreSQL \
PG:"host='localhost' user='chrislhenrick' port='5432' \
dbname='nyc_pluto' password=''" \
bk_map_pluto_4326.json -nln bk_pluto

Exporting Spatial Data from PostGIS

The two main tools used to export spatial data with more complex geometries from Postgres/PostGIS than points are pgsql2shp and ogr2ogr.
Using pgsql2shp

pgsql2shp is a tool that comes installed with PostGIS that allows for exporting data from a PostGIS database to a shapefile format. To use it you need to specify a file path to the output shapefile (just stating the basename with no extension will output in the current working directory), a host name (usually this is localhost), a user name, a password for the user, a database name, and an SQL query.
pgsql2shp -f <path to output shapefile> -h <hostname> -u <username> -P <password> databasename "<query>"

A sample export of a shapefile called my_data from a database called my_db looks like this:
pgsql2shp -f my_data -h localhost -u clhenrick -P 'mypassword' my_db "SELECT * FROM my_db "

Using ogr2ogr

Note: You may need to set the GDAL_DATA path if you git this error:
ERROR 4: Unable to open EPSG support file gcs.csv.
Try setting the GDAL_DATA environment variable to point to the
directory containing EPSG csv files.

If on Linux / Mac OS do this: export GDAL_DATA=/usr/local/share/gdal

If on Windows do this: C:\> set GDAL_DATA=C:\GDAL\data
To Export Data

Use ogr2ogr as follows to export a table (in this case a table called dob_jobs_2014) to a GeoJSON file (in this case a file called dob_jobs_2014_geocoded.geojson):
ogr2ogr -f GeoJSON -t_srs EPSG:4326 dob_jobs_2014_geocoded.geojson \
PG:"host='localhost' dbname='dob_jobs' user='chrislhenrick' password='' port='5432'" \
-sql "SELECT bbl, house, streetname, borough, jobtype, jobstatus, existheight, proposedheight, \
existoccupancy, proposedoccupany, horizontalenlrgmt, verticalenlrgmt, ownerbusinessname, \
ownerhousestreet, ownercitystatezip, ownerphone, jobdescription, geom \
FROM dob_jobs_2014 WHERE geom IS NOT NULL"


note: you must select the column containing the geometry (usually geom or wkb_geometry) for your exported layer to have geometry data.

Other Methods of Interacting With Postgres/PostGIS

to do...
PGAdmin

Python

Node JS