Skip to content

Instantly share code, notes, and snippets.

@feryw

feryw/lg7100_boot_realtek_fw.txt

Last active April 18, 2024 15:00
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save feryw/a8f5e21bd9a89189de6ef23719eea60e to your computer and use it in GitHub Desktop.
Save feryw/a8f5e21bd9a89189de6ef23719eea60e to your computer and use it in GitHub Desktop.
Download ZIP
lg7100_boot_realtek_fw
Raw
lg7100_boot_realtek_fw.txt
BBoooottiinng.
DRAM Type: DDR3
DRAM frequency: 390MHz
DRAM Size = 128 MB▒
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@< GAPM-7100 >@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@
@ chip__no chip__id mfr___id dev___id cap___id size_sft dev_size chipSize
@ 0000000h 0c22019h 00000c2h 0000020h 0000019h 00000f8h 0000017h 2000000h
@ blk_size blk__cnt sec_size sec__cnt pageSize page_cnt chip_clk chipName
@ 0010000h 0000080h 0001000h 0000800h 0000100h 0000010h 0000041h MX25L25635F
@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
---Realtek RTL8198C boot code at 2021.06.03-14:24+0200 v1.5f (1000MHz) [C0 running][C1 sleep]
no sys signature at 00010000!
no sys signature at 00020000!
no sys signature at 00031000!
no sys signature at 00032000!
no sys signature at 00033000!
no sys signature at 00034000!
no sys signature at 00035000!
no sys signature at 00036000!
no sys signature at 00037000!
no sys signature at 00038000!
no sys signature at 00039000!
no sys signature at 0003A000!
no sys signature at 0003B000!
no sys signature at 0003C000!
no sys signature at 0003D000!
no sys signature at 0003E000!
no sys signature at 0003F000!
no sys signature at 00040000!
no sys signature at 00041000!
no sys signature at 00042000!
no sys signature at 00043000!
no sys signature at 00044000!
no sys signature at 00045000!
no sys signature at 00046000!
no sys signature at 00047000!
no sys signature at 00048000!
no sys signature at 00049000!
no sys signature at 0004A000!
no sys signature at 0004B000!
no sys signature at 0004C000!
no sys signature at 0004D000!
no sys signature at 0004E000!
no sys signature at 0004F000!
no sys signature at 00050000!
no sys signature at 00051000!
no sys signature at 00052000!
no sys signature at 00053000!
no sys signature at 00054000!
no sys signature at 00055000!
no sys signature at 00056000!
no sys signature at 00057000!
no sys signature at 00058000!
no sys signature at 00059000!
no sys signature at 0005A000!
no sys signature at 0005B000!
no sys signature at 0005C000!
no sys signature at 0005D000!
no sys signature at 0005E000!
no sys signature at 0005F000!
Jump to image start=0x81000000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
start address: 0xa0003c10
[ 0.000000] Linux version 3.10.90 (work@HP-Z600) (gcc version 4.4.7 (Realtek MSDK-4.4.7 Build 1459) ) #480 Sun Oct 10 08:53:35 EET 2021
[ 0.000000]
[ 0.000000] 6: 2202
[ 0.000000] detected ram size: 134217728
[ 0.000000] BOOTSTRAP: 8198c001 0 5c269 80000000
[ 0.000000] SoC: RTL8198C rev B
[ 0.000000] MIPS: machine is LG GAPM-7100
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019a24 (MIPS 1074Kc)
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x07ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x07ffffff]
[ 0.000000] Detected 1 available secondary CPU(s)
[ 0.000000] @@@@@@@@@@
[ 0.000000] 6: 2203
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] MIPS secondary cache 512kB, 8-way, linesize 32 bytes.
[ 0.000000] PERCPU: Embedded 2 pages/cpu @8265c000 s5888 r8192 d18688 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8176
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock1
[ 0.000000] PID hash table entries: 512 (order: -3, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 2, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 1, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 91616k/131072k available (4749k kernel code, 39456k reserved, 1781k data, 240k init, 0k highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:128
[ 0.000000] CPU0: status register was 1000ff00
[ 0.000000] console [ttyS0] enabled, bootconsole disabled
[ 0.010000] Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464)
[ 0.070000] pid_max: default: 4096 minimum: 301
[ 0.070000] Mount-cache hash table entries: 2048
GO[ 0.100000]
[ 0.100000] 6: 2202
[ 0.100000] @@@@@@@@@@
[ 0.100000] 6: 2203
[ 0.100000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.110000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.120000] MIPS secondary cache 512kB, 8-way, linesize 32 bytes.
[ 0.130000] CPU revision is: 00019a24 (MIPS 1074Kc)
[ 0.190000] Synchronize counters for CPU 1: done.
[ 0.200000] Brought up 2 CPUs
[ 0.200000] devtmpfs: initialized
[ 0.200000] NET: Registered protocol family 16
[ 0.210000] INFO: initializing USB devices ...
[ 0.230000] bio: create slab <bio-0> at 0
[ 0.230000] SCSI subsystem initialized
[ 0.240000] usbcore: registered new interface driver usbfs
[ 0.240000] usbcore: registered new interface driver hub
[ 0.250000] usbcore: registered new device driver usb
[ 0.250000] Switching to clocksource MIPS
[ 0.260000] NET: Registered protocol family 2
[ 0.260000] TCP established hash table entries: 2048 (order: 0, 16384 bytes)
[ 0.270000] TCP bind hash table entries: 2048 (order: 0, 16384 bytes)
[ 0.280000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.280000] TCP: reno registered
[ 0.290000] UDP hash table entries: 512 (order: 0, 16384 bytes)
[ 0.290000] UDP-Lite hash table entries: 512 (order: 0, 16384 bytes)
[ 0.300000] NET: Registered protocol family 1
[ 0.310000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.320000] NTFS driver 2.1.30 [Flags: R/W].
[ 0.330000] fuse init (API version 7.22)
[ 0.330000] msgmni has been set to 178
[ 0.340000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.340000] io scheduler noop registered (default)
[ 0.350000] io scheduler deadline registered
[ 0.410000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.420000] serial8250: ttyS0 at MMIO 0x18002000 (irq = 26) is a 16550A
[ 0.430000] Realtek GPIO Driver for Flash Reload Default
[ 0.430000] SPI INIT
[ 0.440000] ------------------------- Force into Single IO Mode ------------------------
[ 0.450000] |No chipID Sft chipSize blkSize secSize pageSize sdCk opCk chipName |
[ 0.460000] | 0 c22019h feh 2000000h 10000h 1000h 100h 104 0 MX25L25635F|
[ 0.460000] ----------------------------------------------------------------------------
[ 0.480000] SPI flash(MX25L25635F) was found at CS0, size 0x2000000
[ 0.480000] 2 rtkxxpart partitions found on MTD device flash_bank_1
[ 0.490000] Creating 2 MTD partitions on "flash_bank_1":
[ 0.500000] 0x000000000000-0x000002000000 : "boot+cfg+linux"
[ 0.500000] 0x0000002a0000-0x000000800000 : "rootfs"
[ 0.510000] PPP generic driver version 2.4.2
[ 0.510000] PPP BSD Compression module registered
[ 0.520000] PPP Deflate Compression module registered
[ 0.520000] NET: Registered protocol family 24
[ 0.530000] MPPE/MPPC encryption/compression module registered
[ 0.540000] Realtek WLAN driver - version 2.1 (2021-09-05)
[ 0.540000] DFS function - version 2.0.14
[ 0.550000] Adaptivity function - version 9.3.4
[ 0.550000] CFG1
[ 0.950000] UPHY: 8198c ASIC u2 of u3 25M phy patch
[ 1.460000] Find Port=1 Device:Vender ID=881310ec
[ 1.570000] MACHAL_version_init
[ 1.570000] wlan0: reading defaults from flash...
[ 1.580000] wlan0: success.
[ 1.640000] ##########(wlan0)##########
[ 1.650000] SKB_BUF_SIZE[9232] MAX_SKB_NUM[1024]
[ 1.650000] NUM_RX_DESC[256] NUM_TX_DESC[1280]
[ 1.660000] MAX_RX_BUF_LEN[8800]
[ 1.660000] ############################
[ 1.680000] CFG0
[ 2.080000] UPHY: 8198c ASIC u2 of u3 25M phy patch
[ 2.490000] Find Port=0 Device:Vender ID=818b10ec
[ 2.600000] MACHAL_version_init
[ 2.600000] wlan1: reading defaults from flash...
[ 2.610000] wlan1: success.
[ 2.670000] ##########(wlan1)##########
[ 2.670000] SKB_BUF_SIZE[9232] MAX_SKB_NUM[1024]
[ 2.680000] NUM_RX_DESC[256] NUM_TX_DESC[1280]
[ 2.680000] MAX_RX_BUF_LEN[8800]
[ 2.680000] ###########################
[ 2.710000] xhci_plat_probe
[ 2.910000] UPHY: 8198c ASIC u3 of u3 25M phy patch
[ 3.190000] UPHY: 8198c ASIC u2 of u3 25M phy patch
[ 3.620000] dump 0x430=2a0
[ 3.630000] dump 0x420=2a0
[ 3.630000] Do Warm Reset for U3
[ 4.130000] try Port Reset for U2
[ 4.530000] dwc_usb3 dwc_usb3: xHCI Host Controller
[ 4.540000] dwc_usb3 dwc_usb3: new USB bus registered, assigned bus number 1
[ 4.550000] dwc_usb3 dwc_usb3: irq 42, io mem 0x18040000
[ 4.550000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.560000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.570000] usb usb1: Product: xHCI Host Controller
[ 4.580000] usb usb1: Manufacturer: Linux 3.10.90 xhci-hcd
[ 4.580000] usb usb1: SerialNumber: dwc_usb3
[ 4.590000] hub 1-0:1.0: USB hub found
[ 4.590000] hub 1-0:1.0: 1 port detected
[ 4.590000] dwc_usb3 dwc_usb3: xHCI Host Controller
[ 4.600000] dwc_usb3 dwc_usb3: new USB bus registered, assigned bus number 2
[ 4.610000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 4.620000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.620000] usb usb2: Product: xHCI Host Controller
[ 4.630000] usb usb2: Manufacturer: Linux 3.10.90 xhci-hcd
[ 4.640000] usb usb2: SerialNumber: dwc_usb3
[ 4.640000] hub 2-0:1.0: USB hub found
[ 4.640000] hub 2-0:1.0: 1 port detected
[ 4.650000] usbcore: registered new interface driver usb-storage
[ 4.660000] -------8196D OTG init
[ 4.860000] dwc_otg: version 2.60a 22-NOV-2006
[ 4.860000] [S0] lmdev=87117400
[ 4.870000] device_register :register pass
[ 4.870000] =>probe
[ 4.870000] [S2] otg_dev=8710eec0
[ 5.080000] ----init hcd-----
[ 5.080000] [S3] hcd==8775a600
[ 5.090000] DWC_otg: Using DMA mode
[ 5.090000] dwc_otg logicmodule: DWC OTG Controller
[ 5.090000] dwc_otg logicmodule: new USB bus registered, assigned bus number 3
[ 5.100000] dwc_otg logicmodule: irq 41, io mem 0xb8030000
[ 5.110000] set OTG host to high speed !
[ 5.110000] DWC_otg: Init: Port Power? op_state=1
[ 5.110000] DWC_otg: Init: Power Port (0)
[ 5.120000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.130000] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.140000] usb usb3: Product: DWC OTG Controller
[ 5.140000] usb usb3: Manufacturer: Linux 3.10.90 dwc_otg_hcd
[ 5.150000] usb usb3: SerialNumber: logicmodule
[ 5.160000] hub 3-0:1.0: USB hub found
[ 5.160000] hub 3-0:1.0: 1 port detected
[ 5.160000] ----enable irq-----
[ 5.170000] [S1] dwc_otg_driver, lmdriver=8065b504
[ 5.170000] u32 classifier
[ 5.180000] nf_conntrack version 0.5.0 (1431 buckets, 5724 max)
[ 5.180000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.190000] TCP: cubic registered
[ 5.190000] NET: Registered protocol family 17
[ 5.200000] l2tp_core: L2TP core driver, V2.0
[ 5.200000] 8021q: 802.1Q VLAN Support v1.8
[ 5.210000] Realtek FastPath:v1.03
[ 5.210000]
[ 5.210000] Probing RTL819X NIC-kenel stack size order[0]...
[ 5.950000] eth0 added. vid=9 Member port 0x11e...
[ 5.950000] eth1 added. vid=8 Member port 0x1...
[ 6.000000] [peth0] added, mapping to [eth1]...
[ 6.020000] VFS: Mounted root (squashfs filesystem) readonly on device 31:1.
[ 6.040000] devtmpfs: mounted
[ 6.050000] Freeing unused kernel memory: 240K (80664000 - 806a0000)
init started: BusyBox v1.13.4 (2021-09-17 19:51:33 EET)
[ 8.220000] type:3, enable:1, percent1
******************
sysconf init gw all
***************
Init Start...
device info:
Brand: LG
Model: GAPM-7100
Wlan0: AirForce5
Wlan1: AirForce2
macaddr: 08:E0:4C:81:96:E1
[ 8.700000] set switch port 0 to netif eth1
[ 8.710000] set switch port 1 to netif br0
[ 8.710000] set switch port 2 to netif br0
[ 8.720000] set switch port 3 to netif br0
[ 8.720000] set switch port 4 to netif br0
******************
sysconf wlanapp kill wlan0
***************
!!! adjust 5G 2ndoffset for 8812 !!!
******************
sysconf wlanapp kill wlan1
***************
open /proc/br_wlanblock: Permission denied
[ 11.330000] set switch port 0 to netif eth1
[ 11.330000] set switch port 1 to netif br0
[ 11.340000] set switch port 2 to netif br0
[ 11.340000] set switch port 3 to netif br0
[ 11.350000] set switch port 4 to netif br0
Init bridge interface...
[ 11.380000] device eth0 entered promiscuous mode
[ 11.400000] device eth1 entered promiscuous mode
[ 11.410000] device wlan0 entered promiscuous mode
[ 11.420000] WlanSupportAbility = 0x3
[ 11.430000] Force 2T2R for 8814 !!!
[ 11.550000] [ODM_software_init]
[ 11.550000] PHY paratemters: RFE type 4 APA1+ALNA3+GPA1+GLNA1
[ 11.550000] clock 25MHz
[ 11.550000] [GetHwReg88XX][size PHY_REG_PG_8814Amp_Type4]
[ 11.550000] [GetHwReg88XX][PHY_REG_PG_8814Amp_Type4]
[ 11.550000] RL6302_MAC_PHY_Parameter_v018_20140708
[ 11.550000] [phy_ConfigBB_8814A] start
[ 11.550000] [GetHwReg88XX][rtl8814AfwMP]
[ 11.550000] 5G RFE TYPE
[ 11.550000] TRSWITCH: RFE TYPE 2 or 4 or 8
[ 11.550000]
[ 11.550000] IQ Calibrate
[ 11.550000] [wlan0] switch to 2T2R!
[ 12.090000] device wlan1 entered promiscuous mode
[ 12.090000] WlanSupportAbility = 0x3
[ 12.220000] [ODM_software_init]
[ 12.220000] clock 25MHz
[ 12.220000]
[ 12.220000]
[ 12.220000] ************* Initialize MAC/PHY parameter *************
[ 12.220000] [MAC_REG_8192Emp]
[ 12.220000] RTL8192E_MAC_PHY_Parameter_v016_MP_20130705
[ 12.220000] [PHY_REG_8192E_extpa]
[ 12.220000] RTL8192E_MAC_PHY_Parameter_v023_MP_20130910
[ 12.220000] [PHY_REG_PG_8192E_new]
[ 12.220000] RL6286_MAC_PHY_Parameter_v024_20130125
[ 12.220000] [AGC_TAB_8192E_extpa]
[ 12.220000] RTL8192E_MAC_PHY_Parameter_v023_MP_20130910
[ 12.220000] [RadioA_8192E_extpa]
[ 12.220000] RTL8192E_MAC_PHY_Parameter_v023_MP_20130910
[ 12.220000] [RadioB_8192E_extpa]
[ 12.220000] RTL8192E_MAC_PHY_Parameter_v023_MP_20130910
[ 12.220000] [PHY_ConfigTXPwrTrackingWithParaFile 4355]
[ 12.220000] [PHY_ConfigTXPwrTrackingWithParaFile 4425] read_bytes=2283
[ 12.220000] [TxPowerTrack_AP]
[ 13.320000]
[ 13.320000] IQ Calibrate
[ 13.420000] br0: port 4(wlan1) entered forwarding state
[ 13.430000] br0: port 4(wlan1) entered forwarding state
[ 13.430000] br0: port 3(wlan0) entered forwarding state
[ 13.440000] br0: port 3(wlan0) entered forwarding state
[ 13.450000] br0: port 2(eth1) entered forwarding state
[ 13.450000] br0: port 2(eth1) entered forwarding state
[ 13.460000] br0: port 1(eth0) entered forwarding state
[ 13.460000] br0: port 1(eth0) entered forwarding state
syslog will use 64KB for log(7 rotate, 1 original, 8KB for each)
Init Wlan application...
WiFi Simple Config v2.20-wps2.0 (2017.10.20-03:16+0000).
Register to wlan0
Register to wlan1
iwcontrol RegisterPID to (wlan0)
iwcontrol RegisterPID to (wlan1)
route: SIOCDELRT: No such process
IEEE 802.11f (IAPP) using interface br0 (v1.8)
[ 23.910000] br0: port 2(eth1) entered disabled state
[ 23.920000] br0: port 2(eth1) entered forwarding state
[ 23.920000] br0: port 2(eth1) entered forwarding state
Shutting down snmpd ... No snmpd running
open /proc/sys/net/ipv4/rt_cache_rebuild_count: No such file or directory
/bin/sh: can't create /sys/class/net/eth2/queues/rx-0/rps_cpus: nonexistent directory
/bin/sh: can't create /sys/class/net/eth3/queues/rx-0/rps_cpus: nonexistent directory
/bin/sh: can't create /sys/class/net/eth4/queues/rx-0/rps_cpus: nonexistent directory
/bin/sh: can't create /sys/class/net/eth2/queues/rx-0/rps_flow_cnt: nonexistent directory
/bin/sh: can't create /sys/class/net/eth3/queues/rx-0/rps_flow_cnt: nonexistent directory
/bin/sh: can't create /sys/class/net/eth4/queues/rx-0/rps_flow_cnt: nonexistent directory
main:62 ##create netlink socket fail!
enable 0 interval
boa: server version Boa/0.94.14rc21
boa: server built Oct 10 2021 at 08:52:47.
boa: starting server pid=1530, port 80
[ 28.810000] type:3, enable:0, percent0
Startup Ok
#
# cat /proc/mtd
dev: size erasesize name
mtd0: 02000000 00001000 "boot+cfg+linux"
mtd1: 00560000 00001000 "rootfs"
# cat /proc/cpuinfo
system type : RTL8198C rev B
machine : LG GAPM-7100
processor : 0
cpu model : MIPS 1074Kc V2.4
BogoMIPS : 498.89
wait instruction : yes
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : yes
hardware watchpoint : no
isa : mips32r2
ASEs implemented : mips16
shadow register sets : 1
kscratch registers : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
processor : 1
cpu model : MIPS 1074Kc V2.4
BogoMIPS : 498.89
wait instruction : yes
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : yes
hardware watchpoint : no
isa : mips32r2
ASEs implemented : mips16
shadow register sets : 1
kscratch registers : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
# free
total used free shared buffers
Mem: 91856 27376 64480 0 1472
Swap: 0 0 0
Total: 91856 27376 64480
# cat /proc/iomem
18040000-1813ffff : dwc_usb3
18040000-1813ffff : xhci-hcd
# ls /proc
/proc/252/ /proc/modules
/proc/258/ /proc/mounts
/proc/3/ /proc/mtd
/proc/4/ /proc/net/
/proc/5/ /proc/pagetypeinfo
/proc/6/ /proc/partitions
/proc/7/ /proc/peth0/
/proc/8/ /proc/phyPower
/proc/804/ /proc/phyRegTest
/proc/809/ /proc/pptp_conn_ck
/proc/880/ /proc/qos
/proc/9/ /proc/reInitSwitchCore
/proc/974/ /proc/rtl865x/
/proc/StormCtrl /proc/self/
/proc/alg /proc/softirqs
/proc/br_igmpDb /proc/stat
/proc/br_igmpProxy /proc/sys/
/proc/br_igmpQuerierInfo /proc/sysvipc/
/proc/br_igmpVersion /proc/timer_list
/proc/br_igmpquery /proc/tty/
/proc/br_igmpsnoop /proc/udp_frag_entry
/proc/br_mCastFastFwd /proc/uptime
/proc/br_mldQuerierInfo /proc/usb
/proc/br_mldVersion /proc/version
/proc/br_mldquery /proc/vmallocinfo
/proc/br_mldsnoop /proc/vmstat
/proc/buddyinfo /proc/watchdog_cmd
/proc/bus/ /proc/watchdog_kick
/proc/check_swCore_tx_hang /proc/watchdog_reboot
/proc/cmdline /proc/wlan0-va0/
/proc/consoles /proc/wlan0-va1/
/proc/cpuinfo /proc/wlan0-va2/
/proc/crypto /proc/wlan0-va3/
/proc/custom_Passthru /proc/wlan0-vxd/
/proc/custom_Passthru_wlan /proc/wlan0/
/proc/devices /proc/wlan1-va0/
/proc/diskstats /proc/wlan1-va1/
/proc/driver/ /proc/wlan1-va2/
/proc/eee /proc/wlan1-va3/
/proc/enable_dos /proc/wlan1-vxd/
/proc/eth0/ /proc/wlan1/
/proc/eth1/ /proc/zoneinfo
/proc/execdomains
tftp
unknown command: ' @@@@` '
<REALTEK>help
unknown command: ' HELP '
<REALTEK>
**TFTP Client Upload, File Name: openwrt.bin
/
**TFTP Client Upload File Size = 00FB0012 Bytes at A0500000
Success!
<RealTek>
Boot code upgrade.
checksum Ok !
burn Addr =0x00050000! srcAddr=0xa0500010 len =0x00fb0002
.........................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................................................................................................................
Flash Write Successed!
<RealTek>ComSrlCmd_EX4B: ucChip=00000000; uiLen=00000004; returnValue=fffffde6; SPICMD_EX4B=e9000000;
reboot.......
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment