Boot log of failure

72116b0-bselinux-rack-23.log

boot  stbirv-lnx-1:users/fainelli//vmlinuz-initrd-arm ""
sensors
acter is '^]'.


*** Connected to /dev/ttyS1 at 115200 bps
*** Other clients: 0
*** For help: <Control-^> ?


BOLT>
BOLT>
BOLT>
BOLT> boot  stbirv-lnx-1:users/fainelli//vmlinuz-initrd-arm ""
100 Mbps Full-Duplex
Device eth0:  hwaddr 00-10-18-0E-CB-6D, ipaddr 192.168.1.28, mask 255.255.255.0
        gateway 192.168.1.254, nameserver 192.168.1.254, domain igp.broadcom.net
        DHCP server 192.168.1.254, DHCP server MAC B8-AC-6F-80-AF-7E
Loader:zimg Filesys:tftp Dev:(null) File:stbirv-lnx-1:users/fainelli//vmlinuz-initrd-arm Options:(null)
Reading 20285072 bytes from zImage...........
Closing network 'eth0'
RPMB: disabling host access prior to program run.
Starting program at 0x2080000 (DTB @ 0x7612000)

astrasl-lib: v1.15
SBL v4.2.9.0, Signing Tool v4.4.7.0, Profile 72116B0 ZD, Part ZD, Release build .. OK
SRR: 0x02000000@0xbe000000
AMS v2.20.2.0, Signing Tool v4.4.7.0, Profile 72116B0 ZD, Part ZD, DevOnly build .. OK
Boot Status SBL 0x00000005 AMS 0x00000005
Mon Install done
Starting AMS with no ASF
Setting params for Linux @ 0x2080000 (DTB @ 0x7612000)
Monitor virtual pstates off
TZ CPU Mask: 0xe, NW CPU Mask: 0xf
Starting mon at 0x6400000 (params @ 0x7062b20 0x0)

AMS version v1.86:v2.20.2 v1.86-65-ga6836f104
(2023-10-02 21:00:32 jenkins@stbirv-lnx-3)
SecSTR: disabled
Libsec v2.20.2 git:v1.86-AMS_2_20_2_86

AMS: clk: ver={v4,rdb=7941e60,pl=e207d471,xls=28-13,S=6273}, nclks=247, Pmap4(nc=5)
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.8.0-g65d287c7eb1d (ff944844@stbirv-lnx-1) (arm-linux-gcc (stbgcc-12.3-0.2) 12.3.0, GNU ld (stbgcc-12.3-0.2) 2.40) #2 SMP Tue Mar 12 14:28:17 PDT 2024
[    0.000000] CPU: ARMv7 Processor [420f1000] revision 0 (ARMv7), cr=30c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: BCM972116SV
[    0.000000] random: crng init done
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] OF: reserved mem: 0x0000000000000000..0x0000000000000fff (4 KiB) map non-reusable reserved-nodma@0
[    0.000000] OF: reserved mem: 0x0000000006000000..0x0000000006030fff (196 KiB) nomap non-reusable BFW@6000000
[    0.000000] OF: reserved mem: 0x0000000006400000..0x00000000064fffff (1024 KiB) map non-reusable MON@6400000
[    0.000000] OF: reserved mem: 0x0000000007008000..0x000000000700afff (12 KiB) nomap non-reusable SSBM@7008000
[    0.000000] OF: reserved mem: 0x00000000bdfff000..0x00000000bdffffff (4 KiB) nomap non-reusable NWMBOX
[    0.000000] OF: reserved mem: 0x00000000be000000..0x00000000bfffffff (32768 KiB) nomap non-reusable SRR@be000000
[    0.000000] cma: Reserved 16 MiB at 0x00000000bcc00000 on node -1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000]   Normal   empty
[    0.000000]   HighMem  [mem 0x0000000030000000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000005ffffff]
[    0.000000]   node   0: [mem 0x0000000006000000-0x0000000006030fff]
[    0.000000]   node   0: [mem 0x0000000006031000-0x0000000007007fff]
[    0.000000]   node   0: [mem 0x0000000007008000-0x000000000700afff]
[    0.000000]   node   0: [mem 0x000000000700b000-0x00000000bdffefff]
[    0.000000]   node   0: [mem 0x00000000bdfff000-0x00000000bfffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS resident on physical CPU 0x0
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 13 pages/cpu s22164 r8192 d22892 u53248
[    0.000000] Kernel command line:
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1047040
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x0000000029e00000-0x000000002de00000] (64MB)
[    0.000000] Memory: 4010400K/4194304K available (12288K kernel code, 544K rwdata, 2800K rodata, 16384K init, 249K bss, 167520K reserved, 16384K cma-reserved, 3358716K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 27.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
[    0.000002] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
[    0.000010] Switching to timer-based delay loop, resolution 37ns
[    0.000277] Console: colour dummy device 80x30
[    0.000288] printk: legacy console [tty0] enabled
[    0.000623] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
[    0.000643] CPU: Testing write buffer coherency: ok
[    0.000681] pid_max: default: 32768 minimum: 301
[    0.000788] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.000805] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001531] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001943] Setting up static identity map for 0x200000 - 0x200060
[    0.002072] rcu: Hierarchical SRCU implementation.
[    0.002082] rcu: 	Max phase no-delay instances is 400.
[    0.003092] brcmstb: biuctrl: MCP: Enabling write pairing
[    0.003241] smp: Bringing up secondary CPUs ...
[    0.004258] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.005255] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.006155] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.006203] smp: Brought up 1 node, 4 CPUs
[    0.006239] SMP: Total of 4 processors activated (216.00 BogoMIPS).
[    0.006250] CPU: All CPU(s) started in HYP mode.
[    0.006256] CPU: Virtualization extensions available.
[    0.007537] devtmpfs: initialized
[    0.010347] VFP support v0.3: implementor 42 architecture 3 part 10 variant 0 rev 0
[    0.010546] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.010570] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.011098] pinctrl core: initialized pinctrl subsystem
[    0.012132] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.012880] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.013504] thermal_sys: Registered thermal governor 'step_wise'
[    0.013509] thermal_sys: Registered thermal governor 'user_space'
[    0.013545] cpuidle: using governor menu
[    0.013572] No ATAGs?
[    0.013643] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.013656] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.013946] /rdb/syscon@f0202400: Broadcom Brahma-B15 readahead cache
[    0.014298] Serial: AMBA PL011 UART driver
[    0.015285] platform f0460000.pcie: Fixed dependency cycle(s) with /pcie@f0460000
[    0.022594] SCSI subsystem initialized
[    0.022816] usbcore: registered new interface driver usbfs
[    0.022842] usbcore: registered new interface driver hub
[    0.022865] usbcore: registered new device driver usb
[    0.022913] mc: Linux media interface: v0.10
[    0.022935] videodev: Linux video capture interface: v2.00
[    0.022957] pps_core: LinuxPPS API ver. 1 registered
[    0.022964] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.022983] PTP clock support registered
[    0.023062] scmi_core: SCMI protocol bus registered
[    0.023138] Advanced Linux Sound Architecture Driver Initialized.
[    0.023867] vgaarb: loaded
[    0.024053] clocksource: Switched to clocksource arch_sys_counter
[    0.027883] NET: Registered PF_INET protocol family
[    0.028076] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.028877] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.028899] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.028916] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.028961] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.029084] TCP: Hash tables configured (established 8192 bind 8192)
[    0.029168] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.029195] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.029294] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.029621] RPC: Registered named UNIX socket transport module.
[    0.029632] RPC: Registered udp transport module.
[    0.029639] RPC: Registered tcp transport module.
[    0.029645] RPC: Registered tcp-with-tls transport module.
[    0.029652] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.030423] PCI: CLS 0 bytes, default 64
[    0.031428] Initialise system trusted keyrings
[    0.032171] workingset: timestamp_bits=30 max_order=20 bucket_order=0
[    0.032503] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.032819] NFS: Registering the id_resolver key type
[    0.032851] Key type id_resolver registered
[    0.032859] Key type id_legacy registered
[    0.032880] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.032890] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.032912] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.033000] fuse: init (API version 7.39)
[    0.033285] 9p: Installing v9fs 9p2000 file system support
[    0.033530] Key type asymmetric registered
[    0.033540] Asymmetric key parser 'x509' registered
[    0.033605] bounce: pool size: 64 pages
[    0.033635] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.033647] io scheduler mq-deadline registered
[    0.033656] io scheduler kyber registered
[    0.033670] io scheduler bfq registered
[    0.034556] irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f0403000, parent irq: 28)
[    0.034714] irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f0201000, parent irq: 29)
[    0.034822] irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f0201a00, parent irq: 30)
[    0.034936] irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f0410640, parent irq: 31)
[    0.035032] irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f04d1200, parent irq: 32)
[    0.035155] irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f041a600, parent irq: 33)
[    0.035305] irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f040a500, parent irq: 34)
[    0.035395] irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f041a400, parent irq: 35)
[    0.035496] irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f040a540, parent irq: 36)
[    0.035592] irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f041a440, parent irq: 37)
[    0.035689] irq_brcmstb_l2: registered L2 intc (/rdb/interrupt-controller@f0419000, parent irq: 38)
[    0.036035] brcm-gisb-arb f0400000.gisb-arb: registered irqs: 39, 40
[    0.037597] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.037868] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.038005] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.038506] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.038705] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.075330] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.083745] brd: module loaded
[    0.087523] loop: module loaded
[    0.088631] brcmstb_qspi f0418000.spi: using mspi mode
[    0.091993] e1000e: Intel(R) PRO/1000 Network Driver
[    0.092030] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.092091] pegasus: Pegasus/Pegasus II USB Ethernet driver
[    0.092124] usbcore: registered new interface driver pegasus
[    0.092148] usbcore: registered new device driver r8152-cfgselector
[    0.092170] usbcore: registered new interface driver r8152
[    0.092193] usbcore: registered new interface driver asix
[    0.092219] usbcore: registered new interface driver ax88179_178a
[    0.092243] usbcore: registered new interface driver cdc_ether
[    0.092271] usbcore: registered new interface driver cdc_ncm
[    0.092293] usbcore: registered new interface driver r8153_ecm
[    0.093650] usbcore: registered new interface driver cdc_acm
[    0.093686] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.093715] usbcore: registered new interface driver usb-storage
[    0.099135] brcmstb-waketimer f041a680.waketimer: registered as rtc0
[    0.099221] brcmstb-waketimer f041a680.waketimer: setting system clock to 1970-01-01T00:00:21 UTC (21)
[    0.099506] i2c_dev: i2c /dev entries driver
[    0.100367] Consider using thermal netlink events interface
[    0.100773] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
[    0.101598] bcm7038-wdt f040a5a8.watchdog: Registered BCM7038 Watchdog
[    0.102092] sdhci: Secure Digital Host Controller Interface driver
[    0.102113] sdhci: Copyright(c) Pierre Ossman
[    0.102120] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.102999] arm-scmi brcm_scmi@0: SCMI Notifications - Core Enabled.
[    0.127635] arm-scmi brcm_scmi@0: SCMI Protocol v1.0 'brcm-scmi:' Firmware version 0x1
[    0.191011] hid: raw HID events driver (C) Jiri Kosina
[    0.191626] usbcore: registered new interface driver usbhid
[    0.191658] usbhid: USB HID core driver
[    0.193977] NET: Registered PF_INET6 protocol family
[    0.194702] Segment Routing with IPv6
[    0.194746] In-situ OAM (IOAM) with IPv6
[    0.194792] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.195243] NET: Registered PF_PACKET protocol family
[    0.195278] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.195527] 8021q: 802.1Q VLAN Support v1.8
[    0.195581] 9pnet: Installing 9P2000 support
[    0.195659] Key type dns_resolver registered
[    0.195747] Registering SWP/SWPB emulation handler
[    0.205242] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.205614] Loading compiled-in X.509 certificates
[    0.218882] brcmstb-usb-phy f0b00200.usb-phy: Suspend Clock not found in Device Tree
[    0.219473] brcm-pcie f0460000.pcie: host bridge /pcie@f0460000 ranges:
[    0.219529] brcm-pcie f0460000.pcie:      MEM 0x00c0000000..0x00dfffffff -> 0x00c0000000
[    0.219554] brcm-pcie f0460000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0100000000
[    0.219570] brcm-pcie f0460000.pcie:   IB MEM 0x0100000000..0x013fffffff -> 0x01c0000000
[    0.220582] brcm-pcie f0460000.pcie: PCI host bridge to bus 0000:00
[    0.220607] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.220620] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[    0.220656] pci 0000:00:00.0: [14e4:0721] type 01 class 0x060400 PCIe Root Port
[    0.220679] pci 0000:00:00.0: PCI bridge to [bus 00]
[    0.220691] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    0.220703] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    0.220749] pci 0000:00:00.0: PME# supported from D0 D3hot
[    0.221856] PCI: bus0: Fast back to back transfers disabled
[    0.221871] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.221959] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator
[    0.222072] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator
[    0.222103] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator
[    0.476067] brcm-pcie f0460000.pcie: link down
[    0.476214] PCI: bus1: Fast back to back transfers enabled
[    0.476232] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.476265] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.476692] pcieport 0000:00:00.0: PME: Signaling with IRQ 53
[    0.476935] pci_bus 0000:01: busn_res: [bus 01] is released
[    0.477284] pci_bus 0000:00: busn_res: [bus 00-ff] is released
[    0.480664] f040c000.serial: ttyS0 at MMIO 0xf040c000 (irq = 45, base_baud = 5062500) is a Broadcom BCM7271 UART
[    0.480739] printk: legacy console [ttyS0] enabled
[    1.888897] f040d000.serial: ttyS1 at MMIO 0xf040d000 (irq = 54, base_baud = 5062500) is a Broadcom BCM7271 UART
[    1.902148] f040e000.serial: ttyS2 at MMIO 0xf040e000 (irq = 55, base_baud = 5062500) is a Broadcom BCM7271 UART
[    1.913035] brcmstb_qspi f0200920.qspi: using bspi-mspi mode
[    1.919935] spi-nor: probe of spi1.0 failed with error -95
[    1.926435] bcmgenet f0480000.ethernet: GENET 5.0 EPHY: 0x0000
[  162.148135] unimac-mdio unimac-mdio.0: Broadcom UniMAC MDIO bus
[  162.159154] ehci-brcm f0b00500.ehci_v2: EHCI Host Controller
[  162.165032] ehci-brcm f0b00500.ehci_v2: new USB bus registered, assigned bus number 1
[  162.184014] ehci-brcm f0b00500.ehci_v2: irq 65, io mem 0xf0b00500
[  162.197056] ehci-brcm f0b00500.ehci_v2: USB 2.0 started, EHCI 1.00
[  162.203919] hub 1-0:1.0: USB hub found
[  162.207717] hub 1-0:1.0: 1 port detected
[  162.212519] ohci-platform f0b00600.ohci_v2: Generic Platform OHCI controller
[  162.220231] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  162.221134] ohci-platform f0b00600.ohci_v2: new USB bus registered, assigned bus number 2
[  162.236615] ohci-platform f0b00600.ohci_v2: irq 66, io mem 0xf0b00600
[  162.236712] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  162.249919] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[  162.257235] clk: Disabling unused clocks
[  162.261250] ALSA device list:
[  162.264229]   No soundcards found.
[  162.299699] hub 2-0:1.0: USB hub found
[  162.303512] hub 2-0:1.0: 1 port detected
[  162.318069] Freeing unused kernel image (initmem) memory: 16384K
[  162.338255] Run /init as init process
Mounting /proc and /sys...
Looking for modules to load...
Loading modules...[  162.597869] bdc f0b02000.bdc_v2: Using 1 phy(s)
done
Mounting remaining file systems...
Starting rngd...
Switching to schedutil governor...
Setting cpu: 0
Setting cpu: 1
Setting cpu: 2
Setting cpu: 3
Configuring eth0 interface
[  162.795298] unimac-mdio-0:01: Broadcom BCM72116 PHY revision: 0x00
[  162.802648] bcmgenet f0480000.ethernet: configuring instance for internal PHY
[  162.811520] bcmgenet f0480000.ethernet eth0: Link is Down
Configuring lo interface
Configuring sit0 interface
Starting network services
* WARNING: this system uses box mode #0 until Nexus is loaded.
* This box mode is extremely conservative and will not produce
* meaningful benchmarks when used. Consider loading the desired
* box mode through Nexus before benchmarking this system.
# [  165.116623] bcmgenet f0480000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx