-
-
Save fishd72/d3518ef40479a9272f2bd6c425b7af07 to your computer and use it in GitHub Desktop.
So will I have to burn this .zip back to my memory with balena? After this, the config.toml file would be ready without the need to edit it?
@jokersmoker6 also dont forget the underscore in your comment you have "waveshare 3" it has to be "waveshare_3"
So will I have to burn this .zip back to my memory with balena? After this, the config.toml file would be ready without the need to edit it?
yes you should be good to go if you use torch
The .zip from https://github.com/jayofelony/pwnagotchi-torch/releases/tag/v2.5.4 does not allow you to attach it to the balena to burn it to the SD memory (it is already formatted) this new .zip weighs nothing in comparison with others
@jokersmoker6 it should okay first off what pi are you using? pi zero 2 w? or pi zero w
@jokersmoker6 okay so here is what you are gonna need to do... go to the pwnagotchi torch download page that i linked earlier. for your pi you need to download this one " pwnagotchi-rpi-bullseye-2.5.4-armhf.img.xz" you will have to then write this image to the micro sd probably just use the raspberry pi imager. (here is the link for that https://www.raspberrypi.com/software/ ) make sure when you put the image on the sd you select the device on the raspberry pi imager scroll down and select "Raspbery Pi Zero" not "Raspbery Pi Zero 2 W" then for the os select pwnagotchi-rpi-bullseye-2.5.4-armhf.img.xz then you should be good
This script has always worked for me in the past, but on this occasion I'm having no luck with it. I'm running the script as I usually do after setting up and checking I've got internet connectivity (ping google.com), and when running the script it goes through without any errors. But for some reason, I'm getting no life from my V3 Waveshare screen.
Any ideas anyone?
This script has always worked for me in the past, but on this occasion I'm having no luck with it. I'm running the script as I usually do after setting up and checking I've got internet connectivity (ping google.com), and when running the script it goes through without any errors. But for some reason, I'm getting no life from my V3 Waveshare screen.
Any ideas anyone?
most of the recent images will be working out the box and this script will not be needed.
@jokersmoker6 flash your pwnagotchi with pwnagotchi-torch the download for that is in the link i commented earlier in the thread. in the config v3 will work with the v4 display.