Karl Fischer fishi0x01

## setup_rpi_openocd.md

      
        
          
            
              
              1 file
            
          
          
            
              
              0 forks
            
          
          
            
              
              0 comments
            
          
          
            
              
              0 stars
            
          
        
        
          
              
          
          
            
                fishi0x01
                / setup_rpi_openocd.md
            
            
              Created
              February 13, 2021 09:36
                — forked from tstellanova/setup_rpi_openocd.md
            
              
                Setup rpi0 with openocd for flashing nrf52
              
          
        
      
        
  
      
    Instructions for setting up a Raspberry Pi Zero for running OpenOCD
specifically for the purpose of disabling Access Port Protection on nrf52 boards.
Build OpenOCD with CMSIS-DAP and GPIO support

The below script builds natively on the RPi0, and will take a very long time.
sudo apt install wget git autoconf libtool make pkg-config libusb-1.0-0 libusb-1.0-0-dev libhidapi-dev libftdi-dev libhidapi-dev telnet
git clone https://github.com/ntfreak/openocd
cd openocd
./bootstrap