flatlinebb

## nmap_ADHOC.sh
#!/bin/bash
# This script needs to be run as root or sudo!!!!
# Provide client name or IP address as CommandLine argument:
# For example, sudo ./nmap_ADHOC.sh 192.168.2.111
# Feel free to modify the nmap scan options to suit your needs
# Use 'mailx' or any other email solution if you want to be notified by email when the scan is done
# Customize the web directory to match your setup
# Exit on error, and mark commands with a + in output
set -ex
# Capture a log file with the same name as the target:

## Set User Password to Never Expire
Password never expire for a specific user using command-line
Open command-prompt with administrative privileges and run the following command sequence:

Get the name of users currently active on the system using this command: net accounts
Run the following command:
wmic useraccount where �Name=�itechticsuser'� set PasswordExpires=false
Replace �itechticsuser� with the name of user you want to configure.


## send_clipboard_as_keystrokes.ahk
#NoEnv  ; Recommended for performance and compatibility with future AutoHotkey releases.
; #Warn  ; Enable warnings to assist with detecting common errors.
SendMode Input  ; Recommended for new scripts due to its superior speed and reliability.
SetWorkingDir %A_ScriptDir%  ; Ensures a consistent starting directory.
SetWinDelay 100
SetKeyDelay 7

;; Alt+Control+k
^!k::
	SendEvent,{Raw}%Clipboard%

## Jay's .bashrc
# PS1 Prompt
tty -s && export PS1="\[\033[38;5;35m\]\t [\[\033[38;5;33m\]\j\[\033[38;5;35m\]] [\h:\[$(tput sgr0)\]\[\033[38;5;33m\]\w\[$(tput setaf 3)\]]\n\\[\033[38;5;35m\]$ \[$(tput sgr0)\]"

# Env
export TERM=xterm-256color
export EDITOR=vim

# Don't add duplicate lines or lines beginning with a space to the history
HISTCONTROL=ignoreboth

## wget-recursive.txt
Simply download files recursively. Note, that default maximum depth is set to 5.

$ wget --recursive https://example.org/open-directory/

Download files recursively using defined maximum recursion depth level. It is important to remember that level 0 is equivalent to inf infinite recursion.

$ wget --recursive --level 1 https://example.org/files/presentation/

Download files recursively and specify directory prefix. If not specified then by default files are stored in the current directory.

## Documentation.md

      
              2 files
            
          
              0 forks
            
          
              0 comments
            
          
              0 stars
            
          
                flatlinebb
                / Documentation.md
            
            
              Last active
              March 1, 2019 17:10
                — forked from KartikTalwar/Documentation.md
            
              
                Rsync over SSH - (40MB/s over 1GB NICs)
              
          
    The fastest remote directory rsync over ssh archival I can muster (40MB/s over 1gb NICs)

This creates an archive that does the following:

rsync
(Everyone seems to like -z, but it is much slower for me)

a: archive mode - rescursive, preserves owner, preserves permissions, preserves modification times, preserves group, copies symlinks as symlinks, preserves device files.
H: preserves hard-links
A: preserves ACLs


## ipclone.php
<?php
$ip = $_SERVER["REMOTE_ADDR"];
$port = substr($_SERVER["REMOTE_PORT"],0,2);
$browser = $_SERVER["HTTP_USER_AGENT"];
$hostname = gethostbyaddr($ip);
echo $ip;
echo " " . $browser;
echo  " " . $hostname;
echo " " . $port;
?>

## Misc SMART commands
To enable SMART on a drive:
for sd in /dev/sd[a-f]; do echo $sd; smartctl --smart=on --offlineauto=on --saveauto=on $sd; done

For drives in USB enclosures, add the -d sat switch:
for sd in /dev/sd[a-z]; do echo $sd; smartctl --smart=on --offlineauto=on --saveauto=on -d sat $sd; done

To get the ERROR rate
for sd in /dev/sd[a-z]; do smartctl -A /dev/sdb | head -7| tail -1; smartctl -A /dev/sdb | grep Error_Rate | grep -v Multi

for sd in /dev/sd[a-e]; do echo $sd; smartctl -a $sd | grep Model ; smartctl -A $sd | head -7| tail -1; smartctl -A $sd | grep Error_Rate | grep -v Multi; done

## pulseway-service-check.sh
#!/bin/bash
### Pulseway Service Check ###
### Log file location: /var/log/pulseway.log
### Add to crontab for hourly checks at half-past the hour, with no console output:
### 30 * * * * /root/pulseway-service-check.sh > /dev/null 2>&1
### This way, crontab doesn't try to email the result of the job

# Create $variable with the current service status
STATUS=`systemctl show -p SubState --value pulseway`
# For older versions of systemd, skip the "--value"

## debian-initial-install.sh
#!/bin/bash
logfile=/root/$$.log
exec > $logfile 2>&1

# Can be executed remotely with this command:
# curl -L https://gist.githubusercontent.com/flatlinebb/3dea9f4ee2c39ca92ec8bcbd6b0b9a82/raw/f3b63c55d007375bfb4cb10832ff05d6315ce6d8/debian-initial-install.sh | bash

# Get OS details:
lsb_release -a
	#!/bin/bash
	# This script needs to be run as root or sudo!!!!
	# Provide client name or IP address as CommandLine argument:
	# For example, sudo ./nmap_ADHOC.sh 192.168.2.111
	# Feel free to modify the nmap scan options to suit your needs
	# Use 'mailx' or any other email solution if you want to be notified by email when the scan is done
	# Customize the web directory to match your setup
	# Exit on error, and mark commands with a + in output
	set -ex
	# Capture a log file with the same name as the target:
	Password never expire for a specific user using command-line
	Open command-prompt with administrative privileges and run the following command sequence:

	Get the name of users currently active on the system using this command: net accounts
	Run the following command:
	wmic useraccount where �Name=�itechticsuser'� set PasswordExpires=false
	Replace �itechticsuser� with the name of user you want to configure.
	#NoEnv ; Recommended for performance and compatibility with future AutoHotkey releases.
	; #Warn ; Enable warnings to assist with detecting common errors.
	SendMode Input ; Recommended for new scripts due to its superior speed and reliability.
	SetWorkingDir %A_ScriptDir% ; Ensures a consistent starting directory.
	SetWinDelay 100
	SetKeyDelay 7

	;; Alt+Control+k
	^!k::
	SendEvent,{Raw}%Clipboard%
	# PS1 Prompt
	tty -s && export PS1="\[\033[38;5;35m\]\t [\[\033[38;5;33m\]\j\[\033[38;5;35m\]] [\h:\[$(tput sgr0)\]\[\033[38;5;33m\]\w\[$(tput setaf 3)\]]\n\\[\033[38;5;35m\]$ \[$(tput sgr0)\]"

	# Env
	export TERM=xterm-256color
	export EDITOR=vim

	# Don't add duplicate lines or lines beginning with a space to the history
	HISTCONTROL=ignoreboth
	Simply download files recursively. Note, that default maximum depth is set to 5.

	$ wget --recursive https://example.org/open-directory/

	Download files recursively using defined maximum recursion depth level. It is important to remember that level 0 is equivalent to inf infinite recursion.

	$ wget --recursive --level 1 https://example.org/files/presentation/

	Download files recursively and specify directory prefix. If not specified then by default files are stored in the current directory.
	<?php
	$ip = $_SERVER["REMOTE_ADDR"];
	$port = substr($_SERVER["REMOTE_PORT"],0,2);
	$browser = $_SERVER["HTTP_USER_AGENT"];
	$hostname = gethostbyaddr($ip);
	echo $ip;
	echo " " . $browser;
	echo " " . $hostname;
	echo " " . $port;
	?>
	To enable SMART on a drive:
	for sd in /dev/sd[a-f]; do echo $sd; smartctl --smart=on --offlineauto=on --saveauto=on $sd; done

	For drives in USB enclosures, add the -d sat switch:
	for sd in /dev/sd[a-z]; do echo $sd; smartctl --smart=on --offlineauto=on --saveauto=on -d sat $sd; done

	To get the ERROR rate
	for sd in /dev/sd[a-z]; do smartctl -A /dev/sdb \| head -7\| tail -1; smartctl -A /dev/sdb \| grep Error_Rate \| grep -v Multi

	for sd in /dev/sd[a-e]; do echo $sd; smartctl -a $sd \| grep Model ; smartctl -A $sd \| head -7\| tail -1; smartctl -A $sd \| grep Error_Rate \| grep -v Multi; done
	#!/bin/bash
	### Pulseway Service Check ###
	### Log file location: /var/log/pulseway.log
	### Add to crontab for hourly checks at half-past the hour, with no console output:
	### 30 * * * * /root/pulseway-service-check.sh > /dev/null 2>&1
	### This way, crontab doesn't try to email the result of the job

	# Create $variable with the current service status
	STATUS=`systemctl show -p SubState --value pulseway`
	# For older versions of systemd, skip the "--value"
	#!/bin/bash
	logfile=/root/$$.log
	exec > $logfile 2>&1

	# Can be executed remotely with this command:
	# curl -L https://gist.githubusercontent.com/flatlinebb/3dea9f4ee2c39ca92ec8bcbd6b0b9a82/raw/f3b63c55d007375bfb4cb10832ff05d6315ce6d8/debian-initial-install.sh \| bash

	# Get OS details:
	lsb_release -a