sensors configuration for my computer

sensors3.conf

chip "nvme-pci-*"
    label temp2 "flash"
    label temp3 "cpu"

# ASRock B350 Fatal1ty Gaming ITX/ac
# 2019, contributed by Erdem U. Altinyurt
# Modified by Flaviu Tamas
#
# dmi: board_name: B350 Fatal1ty Gaming ITX/ac
# dmi: board_vendor: ASRock
# dmi: bios_version: P5.70
# cpu: AMD Ryzen 7 2700X
chip "nct6792-isa-*"
    # Fans
    label fan2 "cpu"
    label fan1 "chassis 1"
    label fan3 "chassis 2"
    ignore fan4
    ignore fan5
    
    ignore temp1
    ignore temp2
    label temp3 "Motherboard"
    ignore temp4
    ignore temp5
    ignore temp6
    label temp7 "CPU (SMBus)"
    ignore temp8
    ignore temp9
    ignore temp10
    label temp11 "CPU (TSI)"
    
    # Voltages
    
    # VCore is different to VDDCR_CPU
    # VCore is a voltage measured somewhere by the Firmware.
    # (Readings may appear low at times (0.54V) and fluctuate - this is normal)
    label in0 "Vcore"
    compute in0 @*2, @/2
    
    # +3VDC
    label in3 "+3.3V"
    set in3_min 3 * 0.95
    set in3_max 3 * 1.05
    
    # +12VDC
    label in12 "+12V"
    set in12_min 12 * 0.95
    set in12_max 12 * 1.05
    compute in12 ((56/10)+1)*@, @/((56/10)+1)
    
    label in13 "+5V"
    compute in13 ((20/10)+1)*@, @/((20/10)+1)
    set in13_min 5 * 0.90
    set in13_max 5 * 1.10

    ignore PCH_CHIP_CPU_MAX_TEMP
    ignore PCH_CHIP_TEMP
    ignore PCH_CPU_TEMP
    
    #Those are guess
    label in2 "AVCC"
    
    #label in8 "Vbat" #Not give correct battery voltage
    ignore in8
    
    ignore in1 #Unused input that is always at 0.
    ignore in4 #Unused input that is always at 0.
    ignore in5 #Unused input that is always at 0.
    #ignore in9 #Unused input that is always at 0. Not at your board. Might be related with integrated graphics?
    ignore in14 #Unused input that is always at 0.