These instructions have moved to https://github.com/emporia-vue-local/esphome
-
-
Save flaviut/93a1212c7b165c7674693a45ad52c512 to your computer and use it in GitHub Desktop.
I spent way too many hours on this ... but in the end, my method works great and I still have my original Pi4 running HA.
But can you change the ESPhome settings from the RPI4? that is my main reason, I anticipate needing to re-compile and update, and will have remote systems running this etc..
Edit > I'm not saying one method is better than the other, just saying for me this is overall easier and more maintainable, at least until we can compile it on ARM..
No, I would not be able to change the configuration from the Pi4 .... that would require a recompile which can't be done from the Pi4.
I installed ESPHome and the dashboard on one of my laptops. It just sits there ready for use. If I need to recompile, I just start up ESPHome, go to the dashboard, load te configuration file, tweak it and send it back to the Emporia - no muss, no fuss, I just have to remember to do it via Chrome instead of my normal browser (Thunderbird).
I recompiled a whole bunch of times as I was setting everything up so yes, you absolutely need to be able to recompile and send te result to the Emporia. I am still working out a couple of issues and expect that I am not finished configuring things.
BTW, I did not try generating the .bin file on my laptop, transfer it to the pi and then send it to the Emporia. That should (in theory) work but it's an extra step that is not really required.
Does anybody else have issues with 'daily energy' never resetting at the end of the day?
I did need to set my own sntp server (network doesn't allow traffic to the outside) but that didn't help. Looking at the logs from the Emporia, every message has the correct time in front of it.
Let me clarify this a bit - if I look at the 'energy' dashboard, the daily energy is correct. I have an 'entities' card set up in one of my dashboard views and it shows individual circuits and individual daily power usage (and total daily power usage). It is those totals sensors that do not reset.
Platfom 'Total Daily Energy Sensor' states:
# Enable time component to reset energy at midnight
time:
- platform: sntp
id: my_time
From what I can tell, the time platform is working as every single status message from the Emporia has the correct time stamp .... but maybe that time component is different from the time that shows up in the logs - how do I check if id: my_time is correct? my_time is not an entity or a helper so how can I verify it?
Does anybody else have issues with 'daily energy' never resetting at the end of the day?
My daily energy value also did not reset at first. I don't know exactly what I did to fix it. It may have started working on its own at some point after a few days or maybe a week. I do remember that I changed the time platform from sntp to:
time:
- platform: homeassistant
id: homeassistant_time
This is working fine for me and is syncing time via home assistant. I have my emporia vue 2 on an isolated VLAN which doesn't have internet access, so sntp probably wasn't working (my DHCP server hands out local ntp server info, but I think most devices ignore that).
Thanks for that mgulick. I tried that this morning but this gives me a compile error which is likely due to me having to compile the Emporia configuration on a computer other than the computer running HA.
It is good to know I am not the only person that has/had daily reset issues.
*** [.pioenvs/emporia-01/src/esphome/components/sntp/sntp_component.o] Source `src/esphome/components/sntp/sntp_component.cpp' not found, needed by target `.pioenvs/emporia-01/src/esphome/components/sntp/sntp_component.o'.
Is there another location, discord or an issue somewhere, that these things can be discussed. I'm honestly watching this gist in case there are changes or issues with the integration itself.
You could just watch the Integration source repository that is linked to in the example configuration. Not sure where else to discuss issues as there is no issue tracker?
changes or issues with the integration itself.
@Jens5395, I would frequently have compile errors when rebuilding after making changes to the configuration. Cleaning the build artifacts usually resolved the issue. It looks like this option is called "Clean Build Files" from the ESPHome dashboard (https://esphome.io/guides/getting_started_hassio.html) and esphome clean <config>
from the ESPHome CLI (https://esphome.io/guides/cli.html#clean-command).
Ha!!!! That did the trick, it compiled! Now to see if it fixes things at midnight ....
Thanks!
@clowrey sure, my point is that these issues are not related to the Emporia Vue.
Please keep all discussion here
Hey y'all, I've had my own gripes with Gist as a discussion platform as well.
Any further comments here will be deleted and recreated in https://github.com/emporia-vue-local/esphome/discussions. This will be the last comment on this gist.
@rjchu, Yes mqtt is working quite well - I use FHEM (https://fhem.de/) hence mqtt is my choice of integration in this case.
Btw, unlike the emporia app which only calculates apparent power on the 16 CTs, this implementation is correctly measuring real power - thank you @flaviut !
sudo docker run --rm -v "${PWD}":/config -it esphome/esphome version Version: 2022.6.0
here is my draft config - still making design decisions but working quite well already. the send times are temporarily set too low, I plan on every 10 secs for instant and every 5 mins for totals, etc
esphome: name: emporiavue2 external_components: - source: github://flaviut/esphome@emporia-vue-2022.4.0 components: [ emporia_vue ] esp32: board: esp32dev framework: type: esp-idf version: recommended # Enable Home Assistant API #api: {"password": "<ota password>"} ota: {"password": "<xyz>"} # Enable logging logger: level: WARN wifi: ssid: "myssid" password: "mypassword" mqtt: broker: 1.2.3.4 client_id: vue2 username: myuser password: mypassword port: 1883 topic_prefix: vue2 discovery: false log_topic: null i2c: sda: 21 scl: 22 scan: false frequency: 200kHz # recommended range is 50-200kHz id: i2c_a # these are called references in YAML. They allow you to reuse # this configuration in each sensor, while only defining it once .defaultfilters: - &moving_avg # we capture a new sample every 0.24 seconds, so the time can # be calculated from the number of samples as n * 0.24. sliding_window_moving_average: # we average over the past 2.88 seconds window_size: 12 # we push a new value every 1.44 seconds send_every: 6 - &invert # invert and filter out any values below 0. lambda: 'return max(-x, 0.0f);' - &pos # filter out any values below 0. lambda: 'return max(x, 0.0f);' - &abs # take the absolute value of the value lambda: 'return abs(x);' sensor: - platform: emporia_vue i2c_id: i2c_a phases: - id: phase_a # Verify that this specific phase/leg is connected to correct input wire color on device listed below input: BLACK # Vue device wire color calibration: 0.0229 # 0.022 is used as the default as starting point but may need adjusted to ensure accuracy # To calculate new calibration value use the formula <in-use calibration value> * <accurate voltage> / <reporting voltage> voltage: name: "Phase A Voltage" internal: true id: phase_a_voltage filters: [*moving_avg, *pos] - id: phase_b # Verify that this specific phase/leg is connected to correct input wire color on device listed below input: RED # Vue device wire color calibration: 0.022 # 0.022 is used as the default as starting point but may need adjusted to ensure accuracy # To calculate new calibration value use the formula <in-use calibration value> * <accurate voltage> / <reporting voltage> voltage: name: "Phase B Voltage" internal: true id: phase_b_voltage filters: [*moving_avg, *pos] - id: phase_c # Verify that this specific phase/leg is connected to correct input wire color on device listed below input: BLUE # Vue device wire color calibration: 0.022193 # 0.022 is used as the default as starting point but may need adjusted to ensure accuracy # To calculate new calibration value use the formula <in-use calibration value> * <accurate voltage> / <reporting voltage> voltage: internal: true name: "Phase C Voltage" id: phase_c_voltage filters: [*moving_avg, *pos] ct_clamps: - phase_id: phase_a input: "A" # Verify the CT going to this device input also matches the phase/leg power: name: "Phase A Power" internal: true id: phase_a_power device_class: power filters: [*moving_avg, *pos] - phase_id: phase_b input: "B" # Verify the CT going to this device input also matches the phase/leg power: name: "Phase B Power" internal: true id: phase_b_power device_class: power filters: [*moving_avg, *pos] - phase_id: phase_c input: "C" # Verify the CT going to this device input also matches the phase/leg power: name: "Phase C Power" internal: true id: phase_c_power device_class: power filters: [*moving_avg, *pos] # Pay close attention to set the phase_id for each breaker by matching it to the phase/leg it connects to in the panel - { phase_id: phase_b, input: "1", power: { name: "Front Steps (Camera, Lights)", internal: true, id: cir1, filters: [ *moving_avg, *pos ] } } - { phase_id: phase_b, input: "2", power: { name: "Kitchen Left (Fridge, Oven, Microwave)", internal: true, id: cir2, filters: [ *moving_avg, *pos ] } } - { phase_id: phase_b, input: "3", power: { name: "Kitchen Right (Dishwasher, Coffee Machine)", internal: true, id: cir3, filters: [ *moving_avg, *pos ] } } - { phase_id: phase_b, input: "4", power: { name: "4 ??", internal: true, id: cir4, filters: [ *moving_avg, *pos ] } } - { phase_id: phase_c, input: "5", power: { name: "Kitchen Stove", internal: true, id: cir5, filters: [ *moving_avg, *pos ] } } - { phase_id: phase_b, input: "6", power: { name: "Downstairs Right (Study, Hall, Bathroom, Guest, Server)", internal: true, id: cir6, filters: [ *moving_avg, *pos ] } } - { phase_id: phase_c, input: "7", power: { name: "Downstairs Left (Living, Dining Room)", internal: true, id: cir7, filters: [ *moving_avg, *pos ] } } - { phase_id: phase_b, input: "8", power: { name: "Upstairs (Master Bedroom)", internal: true, id: cir8, filters: [ *moving_avg, *pos ] } } - { phase_id: phase_a, input: "9", power: { name: "Upstairs (incl. Attic lights, except Master Bedroom)", internal: true, id: cir9, filters: [ *moving_avg, *pos ] } } - { phase_id: phase_c, input: "10", power: { name: "Cellar, Washing Room, Power Room (incl. Freezer)", internal: true, id: cir10, filters: [ *moving_avg, *pos ] } } - { phase_id: phase_a, input: "11", power: { name: "Doorbell", internal: true, id: cir11, filters: [ *moving_avg, *pos ] } } - { phase_id: phase_a, input: "12", power: { name: "Shutters", internal: true, id: cir12, filters: [ *moving_avg, *pos ] } } - { phase_id: phase_a, input: "13", power: { name: "Cellar (Dryer, Washer)", internal: true, id: cir13, filters: [ *moving_avg, *pos ] } } - { phase_id: phase_a, input: "14", power: { name: "Cellar Right, Workshop Play Room, Heating Room", internal: true, id: cir14, filters: [ *moving_avg, *pos ] } } - { phase_id: phase_a, input: "15", power: { name: "Outdoors Lights", internal: true, id: cir15, filters: [ *moving_avg, *pos ] } } - { phase_id: phase_a, input: "16", power: { name: "Cellar Left, Washing Room (Plants Lights, Garage)", internal: true, id: cir16, filters: [ *moving_avg, *pos ] } } - platform: template internal: true name: "Total Circuits Power" lambda: return id(cir1).state + id(cir2).state + id(cir3).state + id(cir4).state + id(cir5).state + id(cir6).state + id(cir7).state + id(cir8).state + id(cir9).state + id(cir10).state + id(cir11).state + id(cir12).state + id(cir13).state + id(cir14).state + id(cir15).state + id(cir16).state; update_interval: 1s id: total_power_circuits unit_of_measurement: "W" - platform: template internal: true name: "Total Power" lambda: return id(phase_a_power).state + id(phase_b_power).state + id(phase_c_power).state; update_interval: 1s id: total_power unit_of_measurement: "W" - platform: total_daily_energy name: "Total Daily Energy" internal: true power_id: total_power id: total_daily_power accuracy_decimals: 0 min_save_interval: 10s unit_of_measurement: "W" - { power_id: cir1, platform: total_daily_energy, accuracy_decimals: 0, internal: true, id: total_daily_power_cir1 } - { power_id: cir2, platform: total_daily_energy, accuracy_decimals: 0, internal: true, id: total_daily_power_cir2 } - { power_id: cir3, platform: total_daily_energy, accuracy_decimals: 0, internal: true, id: total_daily_power_cir3 } - { power_id: cir4, platform: total_daily_energy, accuracy_decimals: 0, internal: true, id: total_daily_power_cir4 } - { power_id: cir5, platform: total_daily_energy, accuracy_decimals: 0, internal: true, id: total_daily_power_cir5 } - { power_id: cir6, platform: total_daily_energy, accuracy_decimals: 0, internal: true, id: total_daily_power_cir6 } - { power_id: cir7, platform: total_daily_energy, accuracy_decimals: 0, internal: true, id: total_daily_power_cir7 } - { power_id: cir8, platform: total_daily_energy, accuracy_decimals: 0, internal: true, id: total_daily_power_cir8 } - { power_id: cir9, platform: total_daily_energy, accuracy_decimals: 0, internal: true, id: total_daily_power_cir9 } - { power_id: cir10, platform: total_daily_energy, accuracy_decimals: 0, internal: true, id: total_daily_power_cir10 } - { power_id: cir11, platform: total_daily_energy, accuracy_decimals: 0, internal: true, id: total_daily_power_cir11 } - { power_id: cir12, platform: total_daily_energy, accuracy_decimals: 0, internal: true, id: total_daily_power_cir12 } - { power_id: cir13, platform: total_daily_energy, accuracy_decimals: 0, internal: true, id: total_daily_power_cir13 } - { power_id: cir14, platform: total_daily_energy, accuracy_decimals: 0, internal: true, id: total_daily_power_cir14 } - { power_id: cir15, platform: total_daily_energy, accuracy_decimals: 0, internal: true, id: total_daily_power_cir15 } - { power_id: cir16, platform: total_daily_energy, accuracy_decimals: 0, internal: true, id: total_daily_power_cir16 } time: - platform: sntp id: my_time timezone: Europe/Berlin servers: - 192.168.178.99 - 0.pool.ntp.org - 1.pool.ntp.org on_time_sync: then: - logger.log: "Synchronized system clock" on_time: - seconds: /10 then: - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir01_power"); payload: !lambda |- return to_string(id(cir1).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir02_power"); payload: !lambda |- return to_string(id(cir2).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir03_power"); payload: !lambda |- return to_string(id(cir3).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir04_power"); payload: !lambda |- return to_string(id(cir4).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir05_power"); payload: !lambda |- return to_string(id(cir5).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir06_power"); payload: !lambda |- return to_string(id(cir6).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir07_power"); payload: !lambda |- return to_string(id(cir7).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir08_power"); payload: !lambda |- return to_string(id(cir8).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir09_power"); payload: !lambda |- return to_string(id(cir9).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir10_power"); payload: !lambda |- return to_string(id(cir10).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir11_power"); payload: !lambda |- return to_string(id(cir11).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir12_power"); payload: !lambda |- return to_string(id(cir12).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir13_power"); payload: !lambda |- return to_string(id(cir13).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir14_power"); payload: !lambda |- return to_string(id(cir14).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir15_power"); payload: !lambda |- return to_string(id(cir15).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir16_power"); payload: !lambda |- return to_string(id(cir16).state); - mqtt.publish: topic: "vue2/circuits/total_power_circuits" payload: !lambda |- return to_string(id(total_power_circuits).state); - mqtt.publish: topic: "vue2/mains/total/total_power" payload: !lambda |- return to_string(id(total_power).state); - seconds: /10 then: - mqtt.publish: topic: "vue2/mains/phase_a_voltage" payload: !lambda |- return to_string(id(phase_a_voltage).state); - mqtt.publish: topic: "vue2/mains/phase_b_voltage" payload: !lambda |- return to_string(id(phase_b_voltage).state); - mqtt.publish: topic: "vue2/mains/phase_c_voltage" payload: !lambda |- return to_string(id(phase_c_voltage).state); - mqtt.publish: topic: "vue2/mains/phase_a_power" payload: !lambda |- return to_string(id(phase_a_power).state); - mqtt.publish: topic: "vue2/mains/phase_b_power" payload: !lambda |- return to_string(id(phase_b_power).state); - mqtt.publish: topic: "vue2/mains/phase_c_power" payload: !lambda |- return to_string(id(phase_c_power).state); - seconds: 0 minutes: /5 then: - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir01_total_daily_power"); payload: !lambda |- return to_string(id(total_daily_power_cir1).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir02_total_daily_power"); payload: !lambda |- return to_string(id(total_daily_power_cir2).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir03_total_daily_power"); payload: !lambda |- return to_string(id(total_daily_power_cir3).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir04_total_daily_power"); payload: !lambda |- return to_string(id(total_daily_power_cir4).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir05_total_daily_power"); payload: !lambda |- return to_string(id(total_daily_power_cir5).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir06_total_daily_power"); payload: !lambda |- return to_string(id(total_daily_power_cir6).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir07_total_daily_power"); payload: !lambda |- return to_string(id(total_daily_power_cir7).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir08_total_daily_power"); payload: !lambda |- return to_string(id(total_daily_power_cir8).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir09_total_daily_power"); payload: !lambda |- return to_string(id(total_daily_power_cir9).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir10_total_daily_power"); payload: !lambda |- return to_string(id(total_daily_power_cir10).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir11_total_daily_power"); payload: !lambda |- return to_string(id(total_daily_power_cir11).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir12_total_daily_power"); payload: !lambda |- return to_string(id(total_daily_power_cir12).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir13_total_daily_power"); payload: !lambda |- return to_string(id(total_daily_power_cir13).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir14_total_daily_power"); payload: !lambda |- return to_string(id(total_daily_power_cir14).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir15_total_daily_power"); payload: !lambda |- return to_string(id(total_daily_power_cir15).state); - mqtt.publish: topic: !lambda |- return std::string("vue2/circuits/cir16_total_daily_power"); payload: !lambda |- return to_string(id(total_daily_power_cir16).state); - seconds: 0 minutes: /5 then: - mqtt.publish: topic: "vue2/mains/total/total_daily_power" payload: !lambda |- return to_string(id(total_daily_power).state); - seconds: 0 minutes: /10 then: - mqtt.publish: topic: "vue2/circuits/cir01_name" payload: !lambda |- return id(cir1).get_name(); - mqtt.publish: topic: "vue2/circuits/cir02_name" payload: !lambda |- return id(cir2).get_name(); - mqtt.publish: topic: "vue2/circuits/cir03_name" payload: !lambda |- return id(cir3).get_name(); - mqtt.publish: topic: "vue2/circuits/cir04_name" payload: !lambda |- return id(cir4).get_name(); - mqtt.publish: topic: "vue2/circuits/cir05_name" payload: !lambda |- return id(cir5).get_name(); - mqtt.publish: topic: "vue2/circuits/cir06_name" payload: !lambda |- return id(cir6).get_name(); - mqtt.publish: topic: "vue2/circuits/cir07_name" payload: !lambda |- return id(cir7).get_name(); - mqtt.publish: topic: "vue2/circuits/cir08_name" payload: !lambda |- return id(cir8).get_name(); - mqtt.publish: topic: "vue2/circuits/cir09_name" payload: !lambda |- return id(cir9).get_name(); - mqtt.publish: topic: "vue2/circuits/cir10_name" payload: !lambda |- return id(cir10).get_name(); - mqtt.publish: topic: "vue2/circuits/cir11_name" payload: !lambda |- return id(cir11).get_name(); - mqtt.publish: topic: "vue2/circuits/cir12_name" payload: !lambda |- return id(cir12).get_name(); - mqtt.publish: topic: "vue2/circuits/cir13_name" payload: !lambda |- return id(cir13).get_name(); - mqtt.publish: topic: "vue2/circuits/cir14_name" payload: !lambda |- return id(cir14).get_name(); - mqtt.publish: topic: "vue2/circuits/cir15_name" payload: !lambda |- return id(cir15).get_name(); - mqtt.publish: topic: "vue2/circuits/cir16_name" payload: !lambda |- return id(cir16).get_name();
Hi. How is your setup working with 3 phase?
Just bought a couple of emporia and noticed the yaml is setup for 2 phase, not 3.
Good morning
VUE 2 modified with ESPHOME.
same as VUE2.yaml. on home assistant virtual machine works well.
on ihost modified Home assistant returns:
`- Configuring incomplete, errors occurred!
See also "/data/build/vue2-1/.pioenvs/vue2-1/CMakeFiles/CMakeOutput.log".
See also "/data/build/vue2-1/.pioenvs/vue2-1/CMakeFiles/CMakeError.log".
fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
CMake Error at /data/cache/platformio/packages/tool-cmake/share/cmake-3.16/Modules/CMakeTestCCompiler.cmake:60 (message):
The C compiler
"/data/cache/platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-gcc"
is not able to compile a simple test program.
It fails with the following output:
Change Dir: /data/build/vue2-1/.pioenvs/vue2-1/CMakeFiles/CMakeTmp
Run Build Command(s):/data/cache/platformio/packages/tool-ninja/ninja cmTC_22cff && [1/2] Building C object CMakeFiles/cmTC_22cff.dir/testCCompiler.c.obj
[2/2] Linking C executable cmTC_22cff
FAILED: cmTC_22cff
: && /data/cache/platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-gcc -mlongcalls -Wno-frame-address CMakeFiles/cmTC_22cff.dir/testCCompiler.c.obj -o cmTC_22cff && :
/data/cache/platformio/packages/toolchain-xtensa-esp32/bin/../lib/gcc/xtensa-esp32-elf/8.4.0/../../../../xtensa-esp32-elf/bin/ld: /data/cache/platformio/packages/toolchain-xtensa-esp32/bin/../libexec/gcc/xtensa-esp32-elf/8.4.0/liblto_plugin.so: error loading plugin: /data/cache/platformio/packages/toolchain-xtensa-esp32/bin/../libexec/gcc/xtensa-esp32-elf/8.4.0/liblto_plugin.so: cannot open shared object file: No such file or directory
collect2: error: ld returned 1 exit status
ninja: build stopped: subcommand failed.
CMake will not be able to correctly generate this project.
Call Stack (most recent call first):
/data/cache/platformio/packages/framework-espidf/tools/cmake/project.cmake:298 (__project)
CMakeLists.txt:3 (project)
========================= [FAILED] Took 26.35 seconds =========================`
@fabiopbx the current reading doesn't work. I've never been able to figure it out, and there's been some past
discussion where others couldn't figure it out either. I would recommend against using the current sensor.I'd suggest you use a multimeter with a current clamp (don't touch any metal with your fingers! this stuff can easily kill you!)
to see what's going on and if the kW reading is inaccurate. If you want current, you can always calculate it using power/voltage.
Hello @flaviut,
Are current readings ok now ? What should I add in the yaml in order to expose
them in HA for the small 16 clamps ? Because I'd like to give a try to the following :
emporia-vue-local/esphome#287 (comment)
Thanks in advance for your input. Best regards.
S@M
I spent way too many hours on this ... but in the end, my method works great and I still have my original Pi4 running HA.