Arduino WS2812b dataflow fake animation

dataflow-fake.ino

/*
 * Dataflow - Fake
 *
 * 2017 - Chris Figge <info@flazer.net>
 * 
 * Schnell mal runtergeschrieben, weil Bock.
 */

#include <Adafruit_NeoPixel.h>

#define PIN TX
#define NUM_PIXELS 250

#define RAND_UP 30
#define RAND_DOWN 900
#define SPEED 10

const int UP = 1;
const int DOWN = 2;
const int BOTH = 3;

Adafruit_NeoPixel strip = Adafruit_NeoPixel(NUM_PIXELS, PIN, NEO_GRB + NEO_KHZ800);
int LED_STATS[NUM_PIXELS];

void setup() {
  strip.begin();
  clearStrip();
  randomSeed(analogRead(0));
  delay(1000);
}


void loop() {
  generate();
  prepare();
  strip.show();
  move();
  delay(SPEED);
}

void generate() {
  if (random(0, RAND_UP) == RAND_UP - 1) add(UP);
  if (random(0, RAND_DOWN) == RAND_DOWN - 1) add(DOWN);
}

void prepare() {
  for (int count = 0; count < NUM_PIXELS; count++) {
    if(LED_STATS[count] == UP) {
      strip.setPixelColor(count, 0, 0, 100);
    } else if(LED_STATS[count] == DOWN) {
      strip.setPixelColor(count, 100, 0, 0);
    } else if(LED_STATS[count] == BOTH) {
      strip.setPixelColor(count, 100, 0, 100);
    } else {
      strip.setPixelColor(count, 0, 0, 0);
    }
  }
}

void move() {
  int tmp[NUM_PIXELS];

  for (int i = 0; i < NUM_PIXELS; i++) {
    if (LED_STATS[i] == UP) {
      tmp[i+1] = UP;
      tmp[i] = 0;
    }

    if (LED_STATS[i] == DOWN) {
      if (tmp[i] != UP) tmp[i] = 0;
      if (tmp[i-1] == UP) {
        tmp[i-1] = BOTH; 
      } else {
        tmp[i-1] = DOWN;
      }
    }

    if (LED_STATS[i] == BOTH) {
      tmp[i] = 0;
      tmp[i-1] = DOWN;
      tmp[i+1] = UP;
    }
  }

  memcpy(LED_STATS, tmp, NUM_PIXELS * sizeof(int) );
}

void add(int type) {
  if (type == UP) LED_STATS[0] = UP;
  if (type == DOWN) LED_STATS[NUM_PIXELS-1] = DOWN;
}

void clearStrip() {
  for (int i = 0; i < NUM_PIXELS; i++){
    LED_STATS[i] = 0;
    strip.setPixelColor(i, 0, 0, 0);
    strip.show();
  }
}

Kannst du auch das endgültige Script hochladen. Ich bin nämlich gerade dabei auch ein ws2812B LED Band zu programmieren. (habe aber nicht so viel Ahnung von der Materie). Mein Plan ist es das ich das am Ende mit hog4 on PC über Art-Net steuern kann. Zum Steuern der LEDs habe ich ein Arduino Mega. Wäre cool wenn du mir etwas helfen könntest.
Gruß L. Wipperfürth