Skip to content

Instantly share code, notes, and snippets.

@flobler

flobler/SMART Errors OVM Secret

Last active August 7, 2018 05:58
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save flobler/0e0599291af8b796c8d32eaa846dd39d to your computer and use it in GitHub Desktop.
Save flobler/0e0599291af8b796c8d32eaa846dd39d to your computer and use it in GitHub Desktop.
Download ZIP
Raw
SMART Errors OVM
smartctl 6.6 2016-05-31 r4324 [armv7l-linux-4.14.52-v7+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Black
Device Model: WDC WD2003FZEX-00SRLA0
Serial Number: WD-WMC6N0H4R6TZ
LU WWN Device Id: 5 0014ee 059b2c1cd
Firmware Version: 01.01A01
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Aug 7 06:49:23 2018 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Disabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 213) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x203d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 182 182 021 - 3858
4 Start_Stop_Count -O--CK 100 100 000 - 412
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 099 099 000 - 1338
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 43
192 Power-Off_Retract_Count -O--CK 200 200 000 - 20
193 Load_Cycle_Count -O--CK 200 200 000 - 393
194 Temperature_Celsius -O---K 116 096 000 - 31
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x0a GPL R/W 8 Device Statistics Notification
0x0c GPL R/O 901 Pending Defects log
0x0d GPL,SL R/O 8 LPS Mis-alignment log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 192 Current Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xb6 GPL,SL VS 16 Device vendor specific log
0xb7 GPL,SL VS 39 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 130 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 130 [9] occurred at disk power-on lifetime: 1338 hours (55 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d5 00 01 00 00 00 c2 4f e1 00 00 30d+07:51:06.123 SMART READ LOG
b0 00 d6 00 01 00 00 00 c2 4f e0 00 00 30d+07:51:06.044 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f e0 00 00 30d+07:51:06.043 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f e0 00 00 30d+07:51:06.043 SMART WRITE LOG
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 30d+07:51:06.042 SMART READ LOG
Error 129 [8] occurred at disk power-on lifetime: 1294 hours (53 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d5 00 01 00 00 00 c2 4f e1 00 00 28d+11:19:47.093 SMART READ LOG
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 28d+11:19:47.063 SMART READ LOG
b0 00 d6 00 01 00 00 00 c2 4f e0 00 00 28d+11:19:47.062 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f e0 00 00 28d+11:19:47.061 SMART WRITE LOG
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 28d+11:19:47.061 SMART READ LOG
Error 128 [7] occurred at disk power-on lifetime: 1131 hours (47 days + 3 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d5 00 01 00 00 00 c2 4f e1 00 00 21d+16:06:54.612 SMART READ LOG
35 00 00 00 80 00 00 1f 5c 07 80 40 00 21d+16:06:54.602 WRITE DMA EXT
35 00 00 00 f0 00 00 1f 5c 06 90 40 00 21d+16:06:54.593 WRITE DMA EXT
35 00 00 00 f0 00 00 1f 5c 05 a0 40 00 21d+16:06:54.584 WRITE DMA EXT
35 00 00 00 f0 00 00 1f 5c 04 b0 40 00 21d+16:06:54.575 WRITE DMA EXT
Error 127 [6] occurred at disk power-on lifetime: 1131 hours (47 days + 3 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d5 00 01 00 00 00 c2 4f e1 00 00 21d+15:57:47.586 SMART READ LOG
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 21d+15:57:47.584 SMART READ LOG
b0 00 d5 00 01 00 00 00 c2 4f e1 00 00 21d+15:57:47.508 SMART READ LOG
b0 00 d6 00 01 00 00 00 c2 4f e0 00 00 21d+15:57:47.431 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f e0 00 00 21d+15:57:47.430 SMART WRITE LOG
Error 126 [5] occurred at disk power-on lifetime: 1130 hours (47 days + 2 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d5 00 01 00 00 00 c2 4f e1 00 00 21d+15:47:07.081 SMART READ LOG
b0 00 d6 00 01 00 00 00 c2 4f e0 00 00 21d+15:47:06.999 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f e0 00 00 21d+15:47:06.996 SMART WRITE LOG
35 00 00 00 d8 00 00 db 09 97 f8 40 00 21d+15:47:06.986 WRITE DMA EXT
35 00 00 00 f0 00 00 db 09 97 08 40 00 21d+15:47:06.977 WRITE DMA EXT
Error 125 [4] occurred at disk power-on lifetime: 1129 hours (47 days + 1 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 19 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d5 00 01 00 00 00 c2 4f 06 00 00 21d+14:29:39.057 SMART READ LOG
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 21d+14:29:39.055 SMART READ DATA
b0 00 da 00 00 00 00 00 c2 4f 00 00 00 21d+14:29:39.053 SMART RETURN STATUS
e0 00 00 00 00 00 00 00 00 00 00 00 00 21d+14:18:56.113 STANDBY IMMEDIATE
ea 00 00 00 00 00 00 00 00 00 00 00 00 21d+14:18:56.113 FLUSH CACHE EXT
Error 124 [3] occurred at disk power-on lifetime: 1127 hours (46 days + 23 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 19 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d5 00 01 00 00 00 c2 4f 06 00 00 21d+12:29:45.803 SMART READ LOG
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 21d+12:29:45.801 SMART READ DATA
b0 00 da 00 00 00 00 00 c2 4f 00 00 00 21d+12:29:45.800 SMART RETURN STATUS
e5 00 00 00 00 00 00 00 00 00 00 00 00 21d+10:32:51.603 CHECK POWER MODE
b0 00 d5 00 01 00 00 00 c2 4f 01 00 00 21d+10:29:52.570 SMART READ LOG
Error 123 [2] occurred at disk power-on lifetime: 1125 hours (46 days + 21 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 19 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d5 00 01 00 00 00 c2 4f 06 00 00 21d+10:29:52.550 SMART READ LOG
b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 21d+10:29:52.548 SMART READ DATA
b0 00 da 00 00 00 00 00 c2 4f 00 00 00 21d+10:29:52.547 SMART RETURN STATUS
e5 00 00 00 00 00 00 00 00 00 00 00 00 21d+08:32:59.755 CHECK POWER MODE
b0 00 d5 00 01 00 00 00 c2 4f 01 00 00 21d+08:30:00.318 SMART READ LOG
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1338 -
# 2 Short offline Completed without error 00% 1290 -
# 3 Extended offline Aborted by host 80% 1131 -
# 4 Extended offline Aborted by host 00% 1130 -
# 5 Extended offline Aborted by host 00% 1039 -
# 6 Short offline Completed without error 00% 925 -
# 7 Short offline Completed without error 00% 901 -
# 8 Short offline Completed without error 00% 877 -
# 9 Short offline Completed without error 00% 853 -
#10 Short offline Completed without error 00% 829 -
#11 Short offline Completed without error 00% 807 -
#12 Short offline Completed without error 00% 783 -
#13 Short offline Completed without error 00% 759 -
#14 Short offline Completed without error 00% 735 -
#15 Short offline Completed without error 00% 711 -
#16 Short offline Completed without error 00% 687 -
#17 Short offline Completed without error 00% 663 -
#18 Short offline Completed without error 00% 606 -
#19 Short offline Completed without error 00% 589 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 28/48 Celsius
Lifetime Min/Max Temperature: 20/51 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (444)
Index Estimated Time Temperature Celsius
445 2018-08-06 22:52 30 ***********
... ..(475 skipped). .. ***********
443 2018-08-07 06:48 30 ***********
444 2018-08-07 06:49 31 ************
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 43 -D- Lifetime Power-On Resets
0x01 0x010 4 1338 -D- Power-on Hours
0x01 0x018 6 12040596074 -D- Logical Sectors Written
0x01 0x020 6 60716979 -D- Number of Write Commands
0x01 0x028 6 9811776242 -D- Logical Sectors Read
0x01 0x030 6 53082830 -D- Number of Read Commands
0x01 0x038 6 521832704 -D- Date and Time TimeStamp
0x01 0x048 2 124 ND- Workload Utilization
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 135 -D- Spindle Motor Power-on Hours
0x03 0x010 4 68 -D- Head Flying Hours
0x03 0x018 4 414 -D- Head Load Events
0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors
0x03 0x028 4 0 -D- Read Recovery Attempts
0x03 0x030 4 0 -D- Number of Mechanical Start Failures
0x03 0x038 4 0 -D- Number of Realloc. Candidate Logical Sectors
0x03 0x040 4 20 -D- Number of High Priority Unload Events
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors
0x04 0x010 4 118 -D- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 31 -D- Current Temperature
0x05 0x010 1 30 -D- Average Short Term Temperature
0x05 0x018 1 31 -D- Average Long Term Temperature
0x05 0x020 1 52 -D- Highest Temperature
0x05 0x028 1 20 -D- Lowest Temperature
0x05 0x030 1 38 -D- Highest Average Short Term Temperature
0x05 0x038 1 28 -D- Lowest Average Short Term Temperature
0x05 0x040 1 32 -D- Highest Average Long Term Temperature
0x05 0x048 1 31 -D- Lowest Average Long Term Temperature
0x05 0x050 4 0 -D- Time in Over-Temperature
0x05 0x058 1 60 -D- Specified Maximum Operating Temperature
0x05 0x060 4 0 -D- Time in Under-Temperature
0x05 0x068 1 0 -D- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 420 -D- Number of Hardware Resets
0x06 0x010 4 409 -D- Number of ASR Events
0x06 0x018 4 3 -D- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 64 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 65 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 0 Vendor specific
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment