Created
August 11, 2018 23:34
-
-
Save foundObjects/f97c94cfd190e5a24f2d2ec7ed7b4dc1 to your computer and use it in GitHub Desktop.
pcie bootlogs rockpro64 kernel 4.18.0-rc8-1060
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| DDR Version 1.12 20180518 | |
| In | |
| Channel 0: LPDDR4,50MHz | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x4D | |
| MR14=0x4D | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x4D | |
| MR14=0x4D | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB | |
| Channel 1: LPDDR4,50MHz | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x4D | |
| MR14=0x4D | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x4D | |
| MR14=0x4D | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB | |
| 256B stride | |
| channel 0 | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| channel 1 | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| channel 0 training pass! | |
| channel 1 training pass! | |
| change freq to 400MHz 0,1 | |
| channel 0 | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x81 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x81 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| channel 1 | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x81 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x81 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| channel 0 training pass! | |
| channel 1 training pass! | |
| change freq to 800MHz 1,0 | |
| ch 0 ddrconfig = 0x101, ddrsize = 0x2020 | |
| ch 1 ddrconfig = 0x101, ddrsize = 0x2020 | |
| pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD | |
| OUT | |
| U-Boot SPL board init | |
| U-Boot SPL 2017.09-rockchip-ayufan-1025-g482cd6ec8b (Jul 26 2018 - 08:18:48) | |
| booted from SD | |
| Trying to boot from MMC2 | |
| NOTICE: BL31: v1.3(debug):d98d16e | |
| NOTICE: BL31: Built : 15:03:07, May 10 2018 | |
| NOTICE: BL31: Rockchip release version: v1.1 | |
| INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 | |
| INFO: Using opteed sec cpu_context! | |
| INFO: boot cpu mask: 0 | |
| INFO: plat_rockchip_pmu_init(1151): pd status 3e | |
| INFO: BL31: Initializing runtime services | |
| WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK | |
| ERROR: Error initializing runtime service opteed_fast | |
| INFO: BL31: Preparing for EL3 exit to normal world | |
| INFO: Entry point address = 0x200000 | |
| INFO: SPSR = 0x3c9 | |
| U-Boot 2017.09-rockchip-ayufan-1025-g482cd6ec8b (Jul 26 2018 - 08:18:55 +0000) | |
| Model: Pine64 RockPro64 | |
| DRAM: 3.9 GiB | |
| DCDC_REG1@vdd_center: ; enabling | |
| DCDC_REG2@vdd_cpu_l: ; enabling | |
| DCDC_REG3@vcc_ddr: ; enabling (ret: -38) | |
| DCDC_REG4@vcc_1v8: set 1800000 uV; enabling | |
| LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling | |
| LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling | |
| LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling | |
| LDO_REG4@vcc_sd: set 3300000 uV; enabling | |
| LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling | |
| LDO_REG6@vcc_1v5: set 1500000 uV; enabling | |
| LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling | |
| LDO_REG8@vcc_3v0: set 3000000 uV; enabling | |
| SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38) | |
| SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38) | |
| vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38) | |
| dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38) | |
| vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38) | |
| vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38) | |
| vcc-phy-regulator@vcc_phy: ; enabling (ret: -38) | |
| vdd-log@vdd_log: ; enabling (ret: -38) | |
| MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1 | |
| SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB | |
| *** Warning - bad CRC, using default environment | |
| In: serial@ff1a0000 | |
| Out: serial@ff1a0000 | |
| Err: serial@ff1a0000 | |
| Model: Pine64 RockPro64 | |
| Net: eth0: ethernet@fe300000 | |
| Hit any key to stop autoboot: 0 | |
| Card did not respond to voltage select! | |
| mmc_init: -95, time 19 | |
| switch to partitions #0, OK | |
| mmc1 is current device | |
| Scanning mmc 1:7... | |
| Found /boot/extlinux/extlinux.conf | |
| Retrieving file: /boot/extlinux/extlinux.conf | |
| 2025 bytes read in 15 ms (131.8 KiB/s) | |
| select kernel | |
| 1: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727 | |
| 2: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727-memtest | |
| 3: kernel-4.4.132-1075-rockchip-ayufan-ga83beded8524 | |
| 4: kernel-4.4.132-1075-rockchip-ayufan-ga83beded8524-memtest | |
| Enter choice: 1: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727 | |
| Retrieving file: /boot/initrd.img-4.18.0-rc8-1060-ayufan-g45828c4db727 | |
| 5674248 bytes read in 265 ms (20.4 MiB/s) | |
| Retrieving file: /boot/vmlinuz-4.18.0-rc8-1060-ayufan-g45828c4db727 | |
| 28656128 bytes read in 1257 ms (21.7 MiB/s) | |
| append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=5e:7f:67:f2:16:df eth1addr= serial=b036de364fed6ee cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 | |
| Retrieving file: /boot/dtbs/4.18.0-rc8-1060-ayufan-g45828c4db727/rockchip/rk3399-rockpro64.dtb | |
| 54350 bytes read in 49 ms (1.1 MiB/s) | |
| ## Flattened Device Tree blob at 01f00000 | |
| Booting using the fdt blob at 0x1f00000 | |
| Loading Ramdisk to f599a000, end f5f03508 ... OK | |
| Loading Device Tree to 00000000f5989000, end 00000000f599944d ... OK | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
| [ 0.000000] Linux version 4.18.0-rc8-1060-ayufan-g45828c4db727 (root@runner-f725ff63-project-6422644-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3)) #1 SMP PREEMPT Thu Aug 9 19:41:21 UTC 2018 | |
| [ 0.000000] Machine model: Pine64 RockPro64 | |
| [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '') | |
| [ 0.000000] bootconsole [uart8250] enabled | |
| [ 0.000000] efi: Getting EFI parameters from FDT: | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000 | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7ffffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa6f00-0xf6fa86bf] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.0 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.0 | |
| [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0 | |
| [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56216 r8192 d29800 u94208 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 | |
| [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432 | |
| [ 0.000000] Policy zone: DMA32 | |
| [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=5e:7f:67:f2:16:df eth1addr= serial=b036de364fed6ee cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 | |
| [ 0.000000] Memory: 3944244K/4061184K available (17532K kernel code, 1808K rwdata, 7200K rodata, 1408K init, 477K bss, 100556K reserved, 16384K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 | |
| [ 0.000000] Preemptible hierarchical RCU implementation. | |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. | |
| [ 0.000000] Tasks RCU enabled. | |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: Distributor has no Range Selector support | |
| [ 0.000000] GICv3: no VLPI support, no direct LPI support | |
| [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff] | |
| [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f2080000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GIC: using LPI property table @0x00000000f2040000 | |
| [ 0.000000] ITS: Allocated 1792 chunks for LPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000 | |
| [ 0.000000] CPU0: using LPI pending table @0x00000000f2050000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } | |
| [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
| [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
| [ 0.000000] Linux version 4.18.0-rc8-1060-ayufan-g45828c4db727 (root@runner-f725ff63-project-6422644-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3)) #1 SMP PREEMPT Thu Aug 9 19:41:21 UTC 2018 | |
| [ 0.000000] Machine model: Pine64 RockPro64 | |
| [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '') | |
| [ 0.000000] bootconsole [uart8250] enabled | |
| [ 0.000000] efi: Getting EFI parameters from FDT: | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000 | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7ffffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa6f00-0xf6fa86bf] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.0 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.0 | |
| [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0 | |
| [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56216 r8192 d29800 u94208 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 | |
| [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432 | |
| [ 0.000000] Policy zone: DMA32 | |
| [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=5e:7f:67:f2:16:df eth1addr= serial=b036de364fed6ee cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 | |
| [ 0.000000] Memory: 3944244K/4061184K available (17532K kernel code, 1808K rwdata, 7200K rodata, 1408K init, 477K bss, 100556K reserved, 16384K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 | |
| [ 0.000000] Preemptible hierarchical RCU implementation. | |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. | |
| [ 0.000000] Tasks RCU enabled. | |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: Distributor has no Range Selector support | |
| [ 0.000000] GICv3: no VLPI support, no direct LPI support | |
| [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff] | |
| [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f2080000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GIC: using LPI property table @0x00000000f2040000 | |
| [ 0.000000] ITS: Allocated 1792 chunks for LPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000 | |
| [ 0.000000] CPU0: using LPI pending table @0x00000000f2050000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } | |
| [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
| [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
| [ 0.002573] Console: colour dummy device 80x25 | |
| [ 0.002996] console [tty0] enabled | |
| [ 0.003327] bootconsole [uart8250] disabled | |
| [ 0.003797] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) | |
| [ 0.003833] pid_max: default: 32768 minimum: 301 | |
| [ 0.003954] Security Framework initialized | |
| [ 0.006030] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) | |
| [ 0.007091] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) | |
| [ 0.007184] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) | |
| [ 0.007238] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) | |
| [ 0.030645] ASID allocator initialised with 32768 entries | |
| [ 0.038640] Hierarchical SRCU implementation. | |
| [ 0.046762] Platform MSI: interrupt-controller@fee20000 domain created | |
| [ 0.047155] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created | |
| [ 0.051362] EFI services will not be available. | |
| [ 0.059269] smp: Bringing up secondary CPUs ... | |
| [ 0.091486] Detected VIPT I-cache on CPU1 | |
| [ 0.091523] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000 | |
| [ 0.091565] CPU1: using LPI pending table @0x00000000f1440000 | |
| [ 0.091611] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
| [ 0.123569] Detected VIPT I-cache on CPU2 | |
| [ 0.123597] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000 | |
| [ 0.123637] CPU2: using LPI pending table @0x00000000f1480000 | |
| [ 0.123670] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | |
| [ 0.155667] Detected VIPT I-cache on CPU3 | |
| [ 0.155695] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000 | |
| [ 0.155734] CPU3: using LPI pending table @0x00000000f1490000 | |
| [ 0.155765] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | |
| [ 0.190339] CPU features: enabling workaround for EL2 vector hardening | |
| [ 0.190796] Detected PIPT I-cache on CPU4 | |
| [ 0.192025] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000 | |
| [ 0.194543] CPU4: using LPI pending table @0x00000000f14d0000 | |
| [ 0.195785] CPU4: Booted secondary processor 0x0000000100 [0x410fd082] | |
| [ 0.233946] Detected PIPT I-cache on CPU5 | |
| [ 0.235135] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000 | |
| [ 0.237601] CPU5: using LPI pending table @0x00000000f1500000 | |
| [ 0.238729] CPU5: Booted secondary processor 0x0000000101 [0x410fd082] | |
| [ 0.242545] smp: Brought up 1 node, 6 CPUs | |
| [ 0.242928] SMP: Total of 6 processors activated. | |
| [ 0.242966] CPU features: detected: GIC system register CPU interface | |
| [ 0.242991] CPU features: detected: 32-bit EL0 Support | |
| [ 0.333596] CPU: All CPU(s) started at EL2 | |
| [ 0.334061] alternatives: patching kernel code | |
| [ 0.338159] devtmpfs: initialized | |
| [ 0.355875] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.356150] futex hash table entries: 2048 (order: 5, 131072 bytes) | |
| [ 0.357980] xor: measuring software checksum speed | |
| [ 0.395344] 8regs : 1148.000 MB/sec | |
| [ 0.435544] 8regs_prefetch: 1026.000 MB/sec | |
| [ 0.475774] 32regs : 1415.000 MB/sec | |
| [ 0.516009] 32regs_prefetch: 1228.000 MB/sec | |
| [ 0.516029] xor: using function: 32regs (1415.000 MB/sec) | |
| [ 0.516099] pinctrl core: initialized pinctrl subsystem | |
| [ 0.520693] DMI not present or invalid. | |
| [ 0.522011] NET: Registered protocol family 16 | |
| [ 0.528187] audit: initializing netlink subsys (disabled) | |
| [ 0.528913] audit: type=2000 audit(0.520:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.534491] cpuidle: using governor menu | |
| [ 0.535721] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____)) | |
| [ 0.536306] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.545680] DMA: preallocated 1024 KiB pool for atomic allocatio | |
| [ 2.607691] SuperH (H)SCI(F) driver initialized | |
| [ 2.609548] msm_serial: driver initialized | |
| [ 2.632142] cacheinfo: Unable to detect cache hierarchy for CPU 0 | |
| [ 2.655338] brd: module loaded | |
| [ 2.671784] loop: module loaded | |
| [ 2.717422] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel | |
| [ 2.718144] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel | |
| [ 2.723787] m25p80 spi0.0: gd25q128 (16384 Kbytes) | |
| [ 2.736255] 3 fixed-partitions partitions found on MTD device spi0.0 | |
| [ 2.737015] Creating 3 MTD partitions on "spi0.0": | |
| [ 2.737475] 0x000000000000-0x0000003f8000 : "loader" | |
| [ 2.740804] 0x0000003f8000-0x000000400000 : "env" | |
| [ 2.742727] 0x0000007c0000-0x000000800000 : "vendor" | |
| [ 2.751212] libphy: Fixed MDIO Bus: probed | |
| [ 2.754186] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 2.759980] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k | |
| [ 2.761000] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| [ 2.761789] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k | |
| [ 2.762423] igb: Copyright (c) 2007-2014 Intel Corporation. | |
| [ 2.763004] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k | |
| [ 2.763711] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | |
| [ 2.765427] sky2: driver version 1.30 | |
| [ 2.769375] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock | |
| [ 2.770288] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input). | |
| [ 2.770938] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28). | |
| [ 2.771458] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20). | |
| [ 2.771978] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no). | |
| [ 2.772705] rk_gmac-dwmac fe300000.ethernet: clock input from PHY | |
| [ 2.778285] rk_gmac-dwmac fe300000.ethernet: init for RGMII | |
| [ 2.780517] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35 | |
| [ 2.781172] rk_gmac-dwmac fe300000.ethernet: DWMAC1000 | |
| [ 2.781652] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported | |
| [ 2.782332] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported | |
| [ 2.783009] rk_gmac-dwmac fe300000.ethernet: COE Type 2 | |
| [ 2.783485] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported | |
| [ 2.784121] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported | |
| [ 2.784818] rk_gmac-dwmac fe300000.ethernet: Normal descriptors | |
| [ 2.785359] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled | |
| [ 2.785890] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer | |
| [ 2.927875] libphy: stmmac: probed | |
| [ 2.928294] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) | |
| [ 2.929516] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) | |
| [ 2.934257] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver | |
| [ 2.935154] usbcore: registered new interface driver pegasus | |
| [ 2.935746] usbcore: registered new interface driver rtl8150 | |
| [ 2.936355] usbcore: registered new interface driver r8152 | |
| [ 2.937025] usbcore: registered new interface driver asix | |
| [ 2.937578] usbcore: registered new interface driver ax88179_178a | |
| [ 2.938189] usbcore: registered new interface driver cdc_ether | |
| [ 2.938772] usbcore: registered new interface driver dm9601 | |
| [ 2.939340] usbcore: registered new interface driver CoreChips | |
| [ 2.939952] usbcore: registered new interface driver smsc75xx | |
| [ 2.940574] usbcore: registered new interface driver smsc95xx | |
| [ 2.941166] usbcore: registered new interface driver net1080 | |
| [ 2.941735] usbcore: registered new interface driver plusb | |
| [ 2.942298] usbcore: registered new interface driver cdc_subset | |
| [ 2.942889] usbcore: registered new interface driver MOSCHIP usb-ethernet driver | |
| [ 2.943644] usbcore: registered new interface driver cdc_ncm | |
| [ 2.944974] VFIO - User Level meta-driver version: 0.3 | |
| [ 2.949755] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2 | |
| [ 2.962756] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port | |
| [ 2.970527] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2 | |
| [ 2.980333] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 2.981456] ehci-pci: EHCI PCI platform driver | |
| [ 2.982032] ehci-platform: EHCI generic platform driver | |
| [ 2.985185] ehci-platform fe380000.usb: EHCI Host Controller | |
| [ 2.985761] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1 | |
| [ 2.988364] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000 | |
| [ 3.004675] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 3.007045] hub 1-0:1.0: USB hub found | |
| [ 3.007440] hub 1-0:1.0: 1 port detected | |
| [ 3.011083] ehci-platform fe3c0000.usb: EHCI Host Controller | |
| [ 3.011653] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2 | |
| [ 3.014808] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000 | |
| [ 3.028649] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 3.030493] hub 2-0:1.0: USB hub found | |
| [ 3.030892] hub 2-0:1.0: 1 port detected | |
| [ 3.032269] ehci-orion: EHCI orion driver | |
| [ 3.033353] ehci-exynos: EHCI EXYNOS driver | |
| [ 3.034061] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 3.034799] ohci-pci: OHCI PCI platform driver | |
| [ 3.035382] ohci-platform: OHCI generic platform driver | |
| [ 3.036266] ohci-platform fe3a0000.usb: Generic Platform OHCI controller | |
| [ 3.036982] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3 | |
| [ 3.040346] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000 | |
| [ 3.105883] hub 3-0:1.0: USB hub found | |
| [ 3.106279] hub 3-0:1.0: 1 port detected | |
| [ 3.107746] ohci-platform fe3e0000.usb: Generic Platform OHCI controller | |
| [ 3.108374] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4 | |
| [ 3.110760] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000 | |
| [ 3.173649] hub 4-0:1.0: USB hub found | |
| [ 3.174040] hub 4-0:1.0: 1 port detected | |
| [ 3.175330] ohci-exynos: OHCI EXYNOS driver | |
| [ 3.178093] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
| [ 3.178641] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5 | |
| [ 3.184025] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 | |
| [ 3.185056] xhci-hcd xhci-hcd.0.auto: irq 219, io mem 0xfe800000 | |
| [ 3.187530] hub 5-0:1.0: USB hub found | |
| [ 3.187922] hub 5-0:1.0: 1 port detected | |
| [ 3.189252] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
| [ 3.189780] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6 | |
| [ 3.190493] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed | |
| [ 3.191171] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 3.193327] hub 6-0:1.0: USB hub found | |
| [ 3.193762] hub 6-0:1.0: 1 port detected | |
| [ 3.195066] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
| [ 3.195588] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7 | |
| [ 3.199964] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 | |
| [ 3.201054] xhci-hcd xhci-hcd.1.auto: irq 220, io mem 0xfe900000 | |
| [ 3.203470] hub 7-0:1.0: USB hub found | |
| [ 3.203915] hub 7-0:1.0: 1 port detected | |
| [ 3.205009] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
| [ 3.205526] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8 | |
| [ 3.206238] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed | |
| [ 3.206920] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 3.209200] hub 8-0:1.0: USB hub found | |
| [ 3.209606] hub 8-0:1.0: 1 port detected | |
| [ 3.211739] usbcore: registered new interface driver usb-storage | |
| [ 3.223048] i2c /dev entries driver | |
| [ 3.234335] rk808 0-001b: chip id: 0x0 | |
| [ 3.240792] rk808-regulator rk808-regulator: there is no dvs0 gpio | |
| [ 3.241508] rk808-regulator rk808-regulator: there is no dvs1 gpio | |
| [ 3.242156] DCDC_REG1: supplied by vcc_sys | |
| [ 3.243918] DCDC_REG2: supplied by vcc_sys | |
| [ 3.244980] DCDC_REG3: supplied by vcc_sys | |
| [ 3.245793] DCDC_REG4: supplied by vcc_sys | |
| [ 3.246774] LDO_REG1: supplied by vcc_sys | |
| [ 3.248739] LDO_REG2: supplied by vcc_sys | |
| [ 3.250310] LDO_REG3: supplied by vcc_sys | |
| [ 3.251859] LDO_REG4: supplied by vcc_sys | |
| [ 3.253151] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV | |
| [ 3.255068] LDO_REG5: supplied by vcc_sys | |
| [ 3.256633] LDO_REG6: supplied by vcc_sys | |
| [ 3.258343] LDO_REG7: supplied by vcc_sys | |
| [ 3.259913] LDO_REG8: supplied by vcc_sys | |
| [ 3.261488] SWITCH_REG1: supplied by vcc3v3_sys | |
| [ 3.262397] SWITCH_REG2: supplied by vcc3v3_sys | |
| [ 3.268176] rk808-rtc rk808-rtc: registered as rtc0 | |
| [ 3.269789] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! | |
| [ 3.270474] fan53555-reg: supplied by vcc_sys | |
| [ 3.272638] vcc1v8_s3: supplied by vcc_1v8 | |
| [ 3.273939] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! | |
| [ 3.274596] fan53555-reg: supplied by vcc_sys | |
| [ 3.275801] random: fast init done | |
| [ 3.288842] rockchip-rga ff680000.rga: HW Version: 0x03.02 | |
| [ 3.293780] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0 | |
| [ 3.309504] Bluetooth: HCI UART driver ver 2.3 | |
| [ 3.315733] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz | |
| [ 3.317810] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz | |
| [ 3.319720] sdhci: Secure Digital Host Controller Interface driver | |
| [ 3.320278] sdhci: Copyright(c) Pierre Ossman | |
| [ 3.320965] Synopsys Designware Multimedia Card Interface Driver | |
| [ 3.322619] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode. | |
| [ 3.323446] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller. | |
| [ 3.324052] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a | |
| [ 3.324614] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo | |
| [ 3.325606] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO | |
| [ 3.326196] vcc_sdio: unsupportable voltage range: 3300000-3000000uV | |
| [ 3.339550] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) | |
| [ 3.355548] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 3.359249] mmc1: CQHCI version 5.10 | |
| [ 3.385188] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA | |
| [ 3.390609] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 3.394145] usbcore: registered new interface driver usbhid | |
| [ 3.394741] usbhid: USB HID core driver | |
| [ 3.402553] xt_time: kernel timezone is -0000 | |
| [ 3.402977] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP) | |
| [ 3.403767] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) | |
| [ 3.404669] IPVS: ipvs loaded. | |
| [ 3.404946] IPVS: [rr] scheduler registered. | |
| [ 3.405325] IPVS: [wrr] scheduler registered. | |
| [ 3.405711] IPVS: [lc] scheduler registered. | |
| [ 3.406089] IPVS: [wlc] scheduler registered. | |
| [ 3.406473] IPVS: [fo] scheduler registered. | |
| [ 3.406851] IPVS: [ovf] scheduler registered. | |
| [ 3.407242] IPVS: [lblc] scheduler registered. | |
| [ 3.407641] IPVS: [lblcr] scheduler registered. | |
| [ 3.408042] IPVS: [dh] scheduler registered. | |
| [ 3.408505] IPVS: [sh] scheduler registered. | |
| [ 3.408884] IPVS: [sed] scheduler registered. | |
| [ 3.409270] IPVS: [nq] scheduler registered. | |
| [ 3.409954] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully | |
| [ 3.410561] Initializing XFRM netlink socket | |
| [ 3.411354] NET: Registered protocol family 10 | |
| [ 3.412441] Segment Routing with IPv6 | |
| [ 3.413050] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
| [ 3.413943] NET: Registered protocol family 17 | |
| [ 3.414369] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. | |
| [ 3.415612] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 | |
| [ 3.416140] Bluetooth: HIDP socket layer initialized | |
| [ 3.416627] 8021q: 802.1Q VLAN Support v1.8 | |
| [ 3.417027] 9pnet: Installing 9P2000 support | |
| [ 3.417455] Key type dns_resolver registered | |
| [ 3.418582] registered taskstats version 1 | |
| [ 3.419716] Btrfs loaded, crc32c=crc32c-arm64-ce | |
| [ 3.432617] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0) | |
| [ 3.437182] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:09 UTC (1358499009) | |
| [ 3.437948] of_cfs_init | |
| [ 3.438187] of_cfs_init: OK | |
| [ 3.438658] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 | |
| [ 3.439419] cfg80211: failed to load regulatory.db | |
| [ 3.440337] vcc3v3_pcie: disabling | |
| [ 3.440695] ALSA device list: | |
| [ 3.440961] No soundcards found. | |
| [ 3.441561] ttyS2 - failed to request DMA | |
| [ 3.442369] Freeing unused kernel memory: 1408K | |
| Loading, please wait... | |
| starting version 237 | |
| [ 3.574248] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 236 | |
| [ 3.574890] mmc0: new ultra high speed SDR104 SDHC card at address aaaa | |
| [ 3.576251] mmcblk0: mmc0:aaaa SE32G 29.7 GiB | |
| [ 3.585216] mmcblk0: p1 p2 p3 p4 p5 p6 p7 | |
| [ 3.827481] iommu: Adding device ff8f0000.vop to group 0 | |
| [ 3.828128] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu | |
| [ 3.830706] iommu: Adding device ff900000.vop to group 1 | |
| [ 3.831358] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu | |
| [ 3.837756] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop | |
| [ 3.838456] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop | |
| [ 3.839604] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi | |
| [ 3.843697] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm]) | |
| [ 3.850473] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm]) | |
| [ 3.852077] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) | |
| [ 3.857803] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) | |
| [ 3.858662] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
| [ 3.859250] [drm] No driver support for vblank timestamp query. | |
| [ 3.859820] [drm] Cannot find any crtc or sizes | |
| [ 3.860723] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 | |
| Begin: Loading essential drivers ... done. | |
| Begin: Running /scripts/init-premount ... done. | |
| Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. | |
| Begin: Running /scripts/local-premount ... done. | |
| Warning: fsck not present, so skipping root file system | |
| [ 4.002842] EXT4-fs (mmcblk0p7): mounted filesystem with writeback data mode. Opts: (null) | |
| done. | |
| Begin: Running /scripts/local-bottom ... done. | |
| Begin: Running /scripts/init-bottom ... done. | |
| [ 4.277313] systemd[1]: System time before build time, advancing clock. | |
| [ 4.293890] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) | |
| [ 4.296561] systemd[1]: Detected architecture arm64. | |
| Welcome to Ubuntu 18.04.1 LTS! | |
| [ 4.322833] systemd[1]: Set hostname to <rockpro64>. | |
| [ 4.513232] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. | |
| [ 4.514771] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) | |
| [ 4.647853] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 4.648552] systemd[1]: Reached target System Time Synchronized. | |
| [ OK ] Reached target System Time Synchronized. | |
| [ 4.660917] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 4.662579] systemd[1]: Created slice User and Session Slice. | |
| [ OK ] Created slice User and Session Slice. | |
| [ 4.672543] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 4.673425] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [ OK ] Started Forward Password Requests to Wall Directory Watch. | |
| [ 4.684594] systemd[1]: Reached target Remote File Systems. | |
| [ OK ] Reached target Remote File Systems. | |
| [ 4.696846] systemd[1]: Started ntp-systemd-netif.path. | |
| [ OK ] Started ntp-systemd-netif.path. | |
| [ OK ] Created slice System Slice. | |
| [ OK ] Reached target Slices. | |
| [ OK ] Listening on Journal Socket. | |
| Starting Restore / save the current clock... | |
| [ OK ] Listening on udev Control Socket. | |
| [ OK ] Listening on /dev/initctl Compatibility Named Pipe. | |
| [ OK ] Listening on Journal Socket (/dev/log). | |
| Starting Create list of required st…ce nodes for the current kernel... | |
| Starting Load Kernel Modules... | |
| [ OK ] Listening on udev Kernel Socket. | |
| Starting udev Coldplug all Devices... | |
| Starting Remount Root and Kernel File Systems... | |
| Starting Set the console keyboard layout... | |
| [ OK ] Listening on Syslog Socket. | |
| [ 4.888510] [drm] Cannot find any crtc or sizes | |
| Mounting Huge Pages File System... | |
| Starting Nameserver information manager... | |
| [ OK ] Started Dispatch Password Requests to Console Directory Watch. | |
| [ OK ] Reached target Local Encrypted Volumes. | |
| [ OK ] Listening on Journal Audit Socket. | |
| Starting Journal Service... | |
| Mounting POSIX Message Queue File System... | |
| [ OK ] Reached target Swap. | |
| Mounting Kernel Debug File System... | |
| [ OK ] Created slice system-serial\x2dgetty.slice. | |
| [ OK ] Started Journal Service. | |
| [ OK ] Started Restore / save the current clock. | |
| [ OK ] Started Create list of required sta…vice nodes for the current kernel. | |
| [ OK ] Started Load Kernel Modules. | |
| [ OK ] Started Remount Root and Kernel File Systems. | |
| [ OK ] Mounted Huge Pages File System. | |
| [ OK ] Started Set the console keyboard layout. | |
| [ OK ] Mounted POSIX Message Queue File System. | |
| [ OK ] Mounted Kernel Debug File System. | |
| [ OK ] Started Nameserver information manager. | |
| [ OK ] Reached target Network (Pre). | |
| Starting Load/Save Random Seed... | |
| Starting Apply Kernel Variables... | |
| Mounting FUSE Control File System... | |
| Mounting Kernel Configuration File System... | |
| Starting Create Static Device Nodes in /dev... | |
| Starting Flush Journal to Persistent Storage... | |
| [ OK ] Started udev Coldplug all Devices. | |
| [ OK ] Started Load/Save Random Seed. | |
| [ OK ] Started Apply Kernel Variables. | |
| [ OK ] Mounted FUSE Control File System. | |
| [ OK ] Mounted Kernel Configuration File System. | |
| [ OK ] Started Create Static Device Nodes in /dev. | |
| Starting udev Kernel Device Manager... | |
| [ OK ] Reached target Local File Systems (Pre). | |
| [ OK ] Started udev Kernel Device Manager. | |
| Starting Network Service... | |
| [ OK ] Found device /dev/ttyS2. | |
| [ 5.624435] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff880000.i2s; cannot claim for 1-0010 | |
| [ 5.625350] rockchip-pinctrl pinctrl: pin-128 (1-0010) status -22 | |
| [ 5.625934] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) from group i2s-8ch-mclk on device rockchip-pinctrl | |
| [ 5.626955] es8316 1-0010: Error applying setting, reverse things back | |
| [ OK ] Started Network Service. | |
| [ OK ] Started Flush Journal to Persistent Storage. | |
| [ 5.726674] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP | |
| [ 5.727348] Modules linked in: snd_soc_es8316 pcie_rockchip_host(+) phy_rockchip_pcie rockchipdrm analogix_dp | |
| [ 5.728239] CPU: 2 PID: 2307 Comm: systemd-udevd Not tainted 4.18.0-rc8-1060-ayufan-g45828c4db727 #1 | |
| [ 5.729048] Hardware name: Pine64 RockPro64 (DT) | |
| [ 5.729461] pstate: 60000085 (nZCv daIf -PAN -UAO) | |
| [ 5.729896] pc : rockchip_pcie_rd_conf+0x18c/0x1f8 [pcie_rockchip_host] | |
| [ 5.730488] lr : rockchip_pcie_rd_conf+0x17c/0x1f8 [pcie_rockchip_host] | |
| [ 5.731073] sp : ffff00000dee3730 | |
| [ 5.731368] x29: ffff00000dee3730 x28: 0000000000000001 | |
| [ 5.731850] x27: 0000000000000000 x26: 0000000000000000 | |
| [ 5.732331] x25: 0000000000000000 x24: ffff00000dee3854 | |
| [ 5.732413] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found | |
| [ 5.732808] x23: ffff8000f086d800 x22: ffff00000dee37b4 | |
| [ 5.733485] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW | |
| [ 5.733486] x21: ffff8000ee02bb98 x20: 0000000000000004 | |
| [ 5.733687] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| [ 5.735548] x19: ffff00000e100000 x18: ffffffffffffffff | |
| [ 5.736019] x17: 0000000000000000 x16: 0000000000000000 | |
| [ 5.736491] x15: ffff000009a1b508 x14: 303a303030302f30 | |
| [ 5.736964] x13: 0000000000000040 x12: 0000000000000228 | |
| [ 5.737435] x11: 0000000000000000 x10: 0000000000000000 | |
| [ 5.737906] x9 : 0000000000000000 x8 : 0000000000000000 | |
| [ 5.738377] x7 : 0000000000000000 x6 : 0000000000000000 | |
| [ 5.738848] x5 : 0000000000100000 x4 : 0000000000c00008 | |
| [ 5.739319] x3 : ffff000011000000 x2 : 000000000080000a | |
| [ 5.739790] x1 : ffff000011c00008 x0 : ffff00000e000000 | |
| [ 5.740264] Process systemd-udevd (pid: 2307, stack limit = 0x(____ptrval____)) | |
| [ 5.740910] Call trace: | |
| [ 5.741141] rockchip_pcie_rd_conf+0x18c/0x1f8 [pcie_rockchip_host] | |
| [ 5.741707] pci_bus_read_config_dword+0x84/0xe0 | |
| [ 5.742122] pci_bus_read_dev_vendor_id+0x2c/0x1a0 | |
| [ 5.742547] pci_scan_single_device+0x78/0xf8 | |
| [ 5.742934] pci_scan_slot+0x34/0xf0 | |
| [ 5.743253] pci_scan_child_bus_extend+0x50/0x290 | |
| [ 5.743671] pci_scan_bridge_extend+0x2ec/0x4e0 | |
| [ 5.744074] pci_scan_child_bus_extend+0x1e4/0x290 | |
| [ 5.744500] pci_scan_root_bus_bridge+0x58/0xd8 | |
| [ 5.744908] rockchip_pcie_probe+0x60c/0x750 [pcie_rockchip_host] | |
| [ 5.745452] platform_drv_probe+0x50/0xa0 | |
| [ 5.745811] driver_probe_device+0x208/0x2e8 | |
| [ 5.746191] __driver_attach+0xd4/0xd8 | |
| [ 5.746526] bus_for_each_dev+0x74/0xc8 | |
| [ 5.746868] driver_attach+0x20/0x28 | |
| [ 5.747187] bus_add_driver+0x1ac/0x218 | |
| [ 5.747529] driver_register+0x60/0x110 | |
| [ 5.747871] __platform_driver_register+0x40/0x48 | |
| [ 5.748293] rockchip_pcie_driver_init+0x20/0x1000 [pcie_rockchip_host] | |
| [ 5.748879] do_one_initcall+0x5c/0x178 | |
| [ 5.749223] do_init_module+0x58/0x1b0 | |
| [ 5.749558] load_module+0x1e14/0x2210 | |
| [ 5.749892] sys_finit_module+0xcc/0xe8 | |
| [ 5.750233] __sys_trace_return+0x0/0x4 | |
| [ 5.750577] Code: 7100129f 54fff921 f94002a0 8b130013 (b9400273) | |
| [ 5.751118] ---[ end trace 45021505af7c56c2 ]--- | |
| [ 5.751601] note: systemd-udevd[2307] exited with preempt_count 1 | |
| [ OK ] Found device /dev/disk/by-label/boot. | |
| Mounting /boot/efi... | |
| [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. | |
| [ 5.829442] random: crng init done | |
| [ 5.829768] random: 7 urandom warning(s) missed due to ratelimiting | |
| [ 5.938306] FAT-fs (mmcblk0p6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| [ OK ] Mounted /boot/efi. | |
| [ OK ] Reached target Local File Systems. | |
| Starting Raise network interfaces... | |
| Starting Create Volatile Files and Directories... | |
| Starting Set console font and keymap... | |
| [ OK ] Started Set console font and keymap. | |
| [ OK ] Started Create Volatile Files and Directories. | |
| Starting Update UTMP about System Boot/Shutdown... | |
| Starting Network Time Synchronization... | |
| Starting Network Name Resolution... | |
| [ OK ] Started Update UTMP about System Boot/Shutdown. | |
| [ OK ] Started Raise network interfaces. | |
| [ OK ] Started Network Time Synchronization. | |
| [ OK ] Started Network Name Resolution. | |
| [ OK ] Reached target Host and Network Name Lookups. | |
| [ OK ] Reached target System Initialization. | |
| [ OK ] Started Daily Cleanup of Temporary Directories. | |
| [ OK ] Started resolvconf-pull-resolved.path. | |
| [ OK ] Reached target Paths. | |
| [ OK ] Started Daily apt download activities. | |
| [ OK ] Started Discard unused blocks once a week. | |
| [ OK ] Started Daily apt upgrade and clean activities. | |
| [ OK ] Listening on D-Bus System Message Bus Socket. | |
| [ OK ] Reached target Sockets. | |
| [ OK ] Reached target Basic System. | |
| Starting resolvconf-pull-resolved.service... | |
| [ OK ] Started Regular background program processing daemon. | |
| Starting Dispatcher daemon for systemd-networkd... | |
| Starting Generate SSH keys if not there... | |
| Starting Rock 64 First boot... | |
| Starting System Logging Service... | |
| Starting Initializes zram swaping... | |
| [ OK ] Started Set the CPU Frequency Scaling governor. | |
| [ OK ] Started ntp-systemd-netif.service. | |
| Starting Login Service... | |
| Starting Resets System Activity Data Collector... | |
| [ OK ] Started Message of the Day. | |
| [ OK ] Reached target Timers. | |
| [ OK ] Started D-Bus System Message Bus. | |
| [ OK ] Started Login Service. | |
| Starting WPA supplicant... | |
| Starting Network Manager... | |
| [ OK ] Started System Logging Service. | |
| [ OK ] Started resolvconf-pull-resolved.service. | |
| [ OK ] Started Generate SSH keys if not there. | |
| [ OK ] Started Rock 64 First boot. | |
| [FAILED] Failed to start Initializes zram swaping. | |
| See 'systemctl status zram-config.service' for details. | |
| [ OK ] Started Resets System Activity Data Collector. | |
| [ OK ] Started WPA supplicant. | |
| Starting Hostname Service... | |
| [ OK ] Started Hostname Service. | |
| [ OK ] Started Network Manager. | |
| Starting Network Manager Script Dispatcher Service... | |
| [ OK ] Reached target Network. | |
| Starting Permit User Sessions... | |
| Starting Real time performance monitoring... | |
| Starting OpenBSD Secure Shell server... | |
| [ OK ] Started Dispatcher daemon for systemd-networkd. | |
| [ OK ] Started Permit User Sessions. | |
| [ OK ] Started Network Manager Script Dispatcher Service. | |
| Starting Set console scheme... | |
| [ OK ] Started Serial Getty on ttyS2. | |
| [ OK ] Started Set console scheme. | |
| [ OK ] Started OpenBSD Secure Shell server. | |
| Starting Authorization Manager... | |
| [ OK ] Created slice system-getty.slice. | |
| [ OK ] Started Getty on tty1. | |
| [ OK ] Reached target Login Prompts. | |
| [ OK ] Started Authorization Manager. | |
| [ OK ] Started Real time performance monitoring. | |
| [ OK ] Reached target Multi-User System. | |
| [ OK ] Reached target Graphical Interface. | |
| Starting Update UTMP about System Runlevel Changes... | |
| [ OK ] Started Update UTMP about System Runlevel Changes. | |
| Ubuntu 18.04.1 LTS rockpro64 ttyS2 | |
| rockpro64 login: [ 8.797152] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx | |
| [ 8.797931] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| ---- | |
| Connecting to root@rockpro64... | |
| Loading NaCl plugin... done. | |
| root@rockpro64's password: | |
| _ __ _ _ | |
| _ __ ___ ___| | ___ __ _ __ ___ / /_ | || | | |
| | '__/ _ \ / __| |/ / '_ \| '__/ _ \| '_ \| || |_ | |
| | | | (_) | (__| <| |_) | | | (_) | (_) |__ _| | |
| |_| \___/ \___|_|\_\ .__/|_| \___/ \___/ |_| | |
| |_| | |
| Welcome to Ubuntu 18.04.1 LTS (GNU/Linux 4.18.0-rc8-1060-ayufan-g45828c4db727 aarch64) | |
| System information as of Sat Aug 11 22:44:45 UTC 2018 | |
| System load: 0.48 Processes: 143 | |
| Usage of /: 17.4% of 29.10GB Users logged in: 0 | |
| Memory usage: 5% IP address for eth0: 192.168.17.90 | |
| Swap usage: 0% | |
| * Introducing Minimal Ubuntu for docker and clouds. 30 MB base image and | |
| optimised kernels on public clouds. Made for machines and containers. | |
| - https://bit.ly/minimal-ubuntu | |
| Last login: Sat Aug 11 22:42:11 2018 from 192.168.17.50 | |
| root@rockpro64:~# lspci -vt | |
| pcilib: Cannot open /sys/bus/pci/devices/0000:00:00.0/config | |
| lspci: Unable to read the standard configuration space header of device 0000:00:00.0 | |
| -[0000:00]- | |
| root@rockpro64:~# |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| DDR Version 1.12 20180518 | |
| In | |
| Channel 0: LPDDR4,50MHz | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x4D | |
| MR14=0x4D | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x4D | |
| MR14=0x4D | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB | |
| Channel 1: LPDDR4,50MHz | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x4D | |
| MR14=0x4D | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x4D | |
| MR14=0x4D | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB | |
| 256B stride | |
| channel 0 | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x81 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x81 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| channel 1 | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x81 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x81 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| channel 0 training pass! | |
| channel 1 training pass! | |
| change freq to 400MHz 0,1 | |
| channel 0 | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x1 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x1 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| channel 1 | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x1 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x1 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| channel 0 training pass! | |
| channel 1 training pass! | |
| change freq to 800MHz 1,0 | |
| ch 0 ddrconfig = 0x101, ddrsize = 0x2020 | |
| ch 1 ddrconfig = 0x101, ddrsize = 0x2020 | |
| pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD | |
| OUT | |
| U-Boot SPL board init | |
| U-Boot SPL 2017.09-rockchip-ayufan-1025-g482cd6ec8b (Jul 26 2018 - 08:18:48) | |
| booted from SD | |
| Trying to boot from MMC2 | |
| NOTICE: BL31: v1.3(debug):d98d16e | |
| NOTICE: BL31: Built : 15:03:07, May 10 2018 | |
| NOTICE: BL31: Rockchip release version: v1.1 | |
| INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 | |
| INFO: Using opteed sec cpu_context! | |
| INFO: boot cpu mask: 0 | |
| INFO: plat_rockchip_pmu_init(1151): pd status 3e | |
| INFO: BL31: Initializing runtime services | |
| WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK | |
| ERROR: Error initializing runtime service opteed_fast | |
| INFO: BL31: Preparing for EL3 exit to normal world | |
| INFO: Entry point address = 0x200000 | |
| INFO: SPSR = 0x3c9 | |
| U-Boot 2017.09-rockchip-ayufan-1025-g482cd6ec8b (Jul 26 2018 - 08:18:55 +0000) | |
| Model: Pine64 RockPro64 | |
| DRAM: 3.9 GiB | |
| DCDC_REG1@vdd_center: ; enabling | |
| DCDC_REG2@vdd_cpu_l: ; enabling | |
| DCDC_REG3@vcc_ddr: ; enabling (ret: -38) | |
| DCDC_REG4@vcc_1v8: set 1800000 uV; enabling | |
| LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling | |
| LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling | |
| LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling | |
| LDO_REG4@vcc_sd: set 3300000 uV; enabling | |
| LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling | |
| LDO_REG6@vcc_1v5: set 1500000 uV; enabling | |
| LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling | |
| LDO_REG8@vcc_3v0: set 3000000 uV; enabling | |
| SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38) | |
| SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38) | |
| vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38) | |
| dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38) | |
| vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38) | |
| vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38) | |
| vcc-phy-regulator@vcc_phy: ; enabling (ret: -38) | |
| vdd-log@vdd_log: ; enabling (ret: -38) | |
| MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1 | |
| SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB | |
| *** Warning - bad CRC, using default environment | |
| In: serial@ff1a0000 | |
| Out: serial@ff1a0000 | |
| Err: serial@ff1a0000 | |
| Model: Pine64 RockPro64 | |
| Net: eth0: ethernet@fe300000 | |
| Hit any key to stop autoboot: 0 | |
| Card did not respond to voltage select! | |
| mmc_init: -95, time 19 | |
| switch to partitions #0, OK | |
| mmc1 is current device | |
| Scanning mmc 1:7... | |
| Found /boot/extlinux/extlinux.conf | |
| Retrieving file: /boot/extlinux/extlinux.conf | |
| 2025 bytes read in 16 ms (123 KiB/s) | |
| select kernel | |
| 1: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727 | |
| 2: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727-memtest | |
| 3: kernel-4.4.132-1075-rockchip-ayufan-ga83beded8524 | |
| 4: kernel-4.4.132-1075-rockchip-ayufan-ga83beded8524-memtest | |
| Enter choice: 1: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727 | |
| Retrieving file: /boot/initrd.img-4.18.0-rc8-1060-ayufan-g45828c4db727 | |
| 5674248 bytes read in 265 ms (20.4 MiB/s) | |
| Retrieving file: /boot/vmlinuz-4.18.0-rc8-1060-ayufan-g45828c4db727 | |
| 28656128 bytes read in 1258 ms (21.7 MiB/s) | |
| append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=5e:7f:67:f2:16:df eth1addr= serial=b036de364fed6ee cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 | |
| Retrieving file: /boot/dtbs/4.18.0-rc8-1060-ayufan-g45828c4db727/rockchip/rk3399-rockpro64.dtb | |
| 54350 bytes read in 50 ms (1 MiB/s) | |
| ## Flattened Device Tree blob at 01f00000 | |
| Booting using the fdt blob at 0x1f00000 | |
| Loading Ramdisk to f599a000, end f5f03508 ... OK | |
| Loading Device Tree to 00000000f5989000, end 00000000f599944d ... OK | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
| [ 0.000000] Linux version 4.18.0-rc8-1060-ayufan-g45828c4db727 (root@runner-f725ff63-project-6422644-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3)) #1 SMP PREEMPT Thu Aug 9 19:41:21 UTC 2018 | |
| [ 0.000000] Machine model: Pine64 RockPro64 | |
| [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '') | |
| [ 0.000000] bootconsole [uart8250] enabled | |
| [ 0.000000] efi: Getting EFI parameters from FDT: | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000 | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7ffffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa6f00-0xf6fa86bf] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.0 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.0 | |
| [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0 | |
| [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56216 r8192 d29800 u94208 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 | |
| [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432 | |
| [ 0.000000] Policy zone: DMA32 | |
| [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=5e:7f:67:f2:16:df eth1addr= serial=b036de364fed6ee cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 | |
| [ 0.000000] Memory: 3944244K/4061184K available (17532K kernel code, 1808K rwdata, 7200K rodata, 1408K init, 477K bss, 100556K reserved, 16384K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 | |
| [ 0.000000] Preemptible hierarchical RCU implementation. | |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. | |
| [ 0.000000] Tasks RCU enabled. | |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: Distributor has no Range Selector support | |
| [ 0.000000] GICv3: no VLPI support, no direct LPI support | |
| [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff] | |
| [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f2080000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GIC: using LPI property table @0x00000000f2040000 | |
| [ 0.000000] ITS: Allocated 1792 chunks for LPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000 | |
| [ 0.000000] CPU0: using LPI pending table @0x00000000f2050000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } | |
| [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
| [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
| [ 0.002575] Console: colour dummy device 80x25 | |
| [ 0.003000] console [tty0] enabled | |
| [ 0.003331] bootconsole [uart8250] disabled | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
| [ 0.000000] Linux version 4.18.0-rc8-1060-ayufan-g45828c4db727 (root@runner-f725ff63-project-6422644-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3)) #1 SMP PREEMPT Thu Aug 9 19:41:21 UTC 2018 | |
| [ 0.000000] Machine model: Pine64 RockPro64 | |
| [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '') | |
| [ 0.000000] bootconsole [uart8250] enabled | |
| [ 0.000000] efi: Getting EFI parameters from FDT: | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000 | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7ffffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa6f00-0xf6fa86bf] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.0 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.0 | |
| [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0 | |
| [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56216 r8192 d29800 u94208 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 | |
| [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432 | |
| [ 0.000000] Policy zone: DMA32 | |
| [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=5e:7f:67:f2:16:df eth1addr= serial=b036de364fed6ee cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 | |
| [ 0.000000] Memory: 3944244K/4061184K available (17532K kernel code, 1808K rwdata, 7200K rodata, 1408K init, 477K bss, 100556K reserved, 16384K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 | |
| [ 0.000000] Preemptible hierarchical RCU implementation. | |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. | |
| [ 0.000000] Tasks RCU enabled. | |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: Distributor has no Range Selector support | |
| [ 0.000000] GICv3: no VLPI support, no direct LPI support | |
| [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff] | |
| [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f2080000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GIC: using LPI property table @0x00000000f2040000 | |
| [ 0.000000] ITS: Allocated 1792 chunks for LPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000 | |
| [ 0.000000] CPU0: using LPI pending table @0x00000000f2050000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } | |
| [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
| [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
| [ 0.002575] Console: colour dummy device 80x25 | |
| [ 0.003000] console [tty0] enabled | |
| [ 0.003331] bootconsole [uart8250] disabled | |
| [ 0.003801] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) | |
| [ 0.003836] pid_max: default: 32768 minimum: 301 | |
| [ 0.003959] Security Framework initialized | |
| [ 0.006029] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) | |
| [ 0.007088] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) | |
| [ 0.007179] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) | |
| [ 0.007233] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) | |
| [ 0.030647] ASID allocator initialised with 32768 entries | |
| [ 0.038641] Hierarchical SRCU implementation. | |
| [ 0.046763] Platform MSI: interrupt-controller@fee20000 domain created | |
| [ 0.047175] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created | |
| [ 0.051383] EFI services will not be available. | |
| [ 0.059289] smp: Bringing up secondary CPUs ... | |
| [ 0.091506] Detected VIPT I-cache on CPU1 | |
| [ 0.091543] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000 | |
| [ 0.091586] CPU1: using LPI pending table @0x00000000f1440000 | |
| [ 0.091632] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
| [ 0.123588] Detected VIPT I-cache on CPU2 | |
| [ 0.123617] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000 | |
| [ 0.123657] CPU2: using LPI pending table @0x00000000f1480000 | |
| [ 0.123690] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | |
| [ 0.155687] Detected VIPT I-cache on CPU3 | |
| [ 0.155714] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000 | |
| [ 0.155753] CPU3: using LPI pending table @0x00000000f1490000 | |
| [ 0.155784] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | |
| [ 0.190366] CPU features: enabling workaround for EL2 vector hardening | |
| [ 0.190822] Detected PIPT I-cache on CPU4 | |
| [ 0.192056] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000 | |
| [ 0.194556] CPU4: using LPI pending table @0x00000000f14d0000 | |
| [ 0.195804] CPU4: Booted secondary processor 0x0000000100 [0x410fd082] | |
| [ 0.233983] Detected PIPT I-cache on CPU5 | |
| [ 0.235173] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000 | |
| [ 0.237650] CPU5: using LPI pending table @0x00000000f1500000 | |
| [ 0.238776] CPU5: Booted secondary processor 0x0000000101 [0x410fd082] | |
| [ 0.243968] smp: Brought up 1 node, 6 CPUs | |
| [ 0.244489] SMP: Total of 6 processors activated. | |
| [ 0.244525] CPU features: detected: GIC system register CPU interface | |
| [ 0.244551] CPU features: detected: 32-bit EL0 Support | |
| [ 0.334631] CPU: All CPU(s) started at EL2 | |
| [ 0.335118] alternatives: patching kernel code | |
| [ 0.339201] devtmpfs: initialized | |
| [ 0.356943] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.357176] futex hash table entries: 2048 (order: 5, 131072 bytes) | |
| [ 0.359365] xor: measuring software checksum speed | |
| [ 0.396366] 8regs : 1148.000 MB/sec | |
| [ 0.436579] 8regs_prefetch: 1026.000 MB/sec | |
| [ 0.476794] 32regs : 1415.000 MB/sec | |
| [ 0.517024] 32regs_prefetch: 1190.000 MB/sec | |
| [ 0.517045] xor: using function: 32regs (1415.000 MB/sec) | |
| [ 0.517086] pinctrl core: initialized pinctrl subsystem | |
| [ 0.520740] DMI not present or invalid. | |
| [ 0.522414] NET: Registered protocol family 16 | |
| [ 0.526521] audit: initializing netlink subsys (disabled) | |
| [ 0.527406] audit: type=2000 audit(0.520:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.534739] cpuidle: using governor menu | |
| [ 0.536090] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____)) | |
| [ 0.536269] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.547068] DMA: preallocated 1024 KiB pool for atomic allocatio 2.470061] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| [ 2.470357] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 | |
| [ 2.475981] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| [ 2.476168] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 | |
| [ 2.486645] pwm-regulator: supplied by vcc_sys | |
| [ 2.487814] vcc3v3_sys: supplied by vcc_sys | |
| [ 2.498129] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 2.502398] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A | |
| [ 2.504605] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A | |
| [ 2.613671] console [ttyS2] enabled | |
| [ 2.617155] SuperH (H)SCI(F) driver initialized | |
| [ 2.618805] msm_serial: driver initialized | |
| [ 2.640684] cacheinfo: Unable to detect cache hierarchy for CPU 0 | |
| [ 2.665664] brd: module loaded | |
| [ 2.682151] loop: module loaded | |
| [ 2.733956] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel | |
| [ 2.734666] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel | |
| [ 2.738883] m25p80 spi0.0: gd25q128 (16384 Kbytes) | |
| [ 2.751076] 3 fixed-partitions partitions found on MTD device spi0.0 | |
| [ 2.752302] Creating 3 MTD partitions on "spi0.0": | |
| [ 2.752770] 0x000000000000-0x0000003f8000 : "loader" | |
| [ 2.756141] 0x0000003f8000-0x000000400000 : "env" | |
| [ 2.758272] 0x0000007c0000-0x000000800000 : "vendor" | |
| [ 2.765974] libphy: Fixed MDIO Bus: probed | |
| [ 2.768710] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 2.773997] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k | |
| [ 2.774652] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| [ 2.775746] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k | |
| [ 2.776407] igb: Copyright (c) 2007-2014 Intel Corporation. | |
| [ 2.777067] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k | |
| [ 2.777775] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | |
| [ 2.779664] sky2: driver version 1.30 | |
| [ 2.783148] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock | |
| [ 2.784145] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input). | |
| [ 2.784792] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28). | |
| [ 2.785309] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20). | |
| [ 2.785828] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no). | |
| [ 2.786434] rk_gmac-dwmac fe300000.ethernet: clock input from PHY | |
| [ 2.792019] rk_gmac-dwmac fe300000.ethernet: init for RGMII | |
| [ 2.794410] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35 | |
| [ 2.795078] rk_gmac-dwmac fe300000.ethernet: DWMAC1000 | |
| [ 2.795606] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported | |
| [ 2.796285] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported | |
| [ 2.796963] rk_gmac-dwmac fe300000.ethernet: COE Type 2 | |
| [ 2.797438] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported | |
| [ 2.798074] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported | |
| [ 2.798729] rk_gmac-dwmac fe300000.ethernet: Normal descriptors | |
| [ 2.799288] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled | |
| [ 2.799821] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer | |
| [ 3.202016] libphy: stmmac: probed | |
| [ 3.202350] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) | |
| [ 3.203533] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) | |
| [ 3.208175] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver | |
| [ 3.209021] usbcore: registered new interface driver pegasus | |
| [ 3.209608] usbcore: registered new interface driver rtl8150 | |
| [ 3.210234] usbcore: registered new interface driver r8152 | |
| [ 3.210833] usbcore: registered new interface driver asix | |
| [ 3.211483] usbcore: registered new interface driver ax88179_178a | |
| [ 3.212097] usbcore: registered new interface driver cdc_ether | |
| [ 3.212696] usbcore: registered new interface driver dm9601 | |
| [ 3.213267] usbcore: registered new interface driver CoreChips | |
| [ 3.213893] usbcore: registered new interface driver smsc75xx | |
| [ 3.214479] usbcore: registered new interface driver smsc95xx | |
| [ 3.215068] usbcore: registered new interface driver net1080 | |
| [ 3.215705] usbcore: registered new interface driver plusb | |
| [ 3.216270] usbcore: registered new interface driver cdc_subset | |
| [ 3.216872] usbcore: registered new interface driver MOSCHIP usb-ethernet driver | |
| [ 3.217636] usbcore: registered new interface driver cdc_ncm | |
| [ 3.218813] VFIO - User Level meta-driver version: 0.3 | |
| [ 3.222872] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2 | |
| [ 3.238232] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port | |
| [ 3.245939] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2 | |
| [ 3.256188] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 3.256857] ehci-pci: EHCI PCI platform driver | |
| [ 3.257333] ehci-platform: EHCI generic platform driver | |
| [ 3.260311] ehci-platform fe380000.usb: EHCI Host Controller | |
| [ 3.260869] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1 | |
| [ 3.263745] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000 | |
| [ 3.279497] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 3.281536] hub 1-0:1.0: USB hub found | |
| [ 3.281982] hub 1-0:1.0: 1 port detected | |
| [ 3.285760] ehci-platform fe3c0000.usb: EHCI Host Controller | |
| [ 3.286305] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2 | |
| [ 3.290684] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000 | |
| [ 3.303450] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 3.305350] hub 2-0:1.0: USB hub found | |
| [ 3.305745] hub 2-0:1.0: 1 port detected | |
| [ 3.307066] ehci-orion: EHCI orion driver | |
| [ 3.307979] ehci-exynos: EHCI EXYNOS driver | |
| [ 3.308660] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 3.309382] ohci-pci: OHCI PCI platform driver | |
| [ 3.309920] ohci-platform: OHCI generic platform driver | |
| [ 3.310729] ohci-platform fe3a0000.usb: Generic Platform OHCI controller | |
| [ 3.311446] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3 | |
| [ 3.313998] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000 | |
| [ 3.376642] hub 3-0:1.0: USB hub found | |
| [ 3.377054] hub 3-0:1.0: 1 port detected | |
| [ 3.378303] ohci-platform fe3e0000.usb: Generic Platform OHCI controller | |
| [ 3.378932] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4 | |
| [ 3.380543] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000 | |
| [ 3.444650] hub 4-0:1.0: USB hub found | |
| [ 3.445034] hub 4-0:1.0: 1 port detected | |
| [ 3.446289] ohci-exynos: OHCI EXYNOS driver | |
| [ 3.448585] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
| [ 3.449164] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5 | |
| [ 3.453972] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 | |
| [ 3.454904] xhci-hcd xhci-hcd.0.auto: irq 219, io mem 0xfe800000 | |
| [ 3.457234] hub 5-0:1.0: USB hub found | |
| [ 3.457626] hub 5-0:1.0: 1 port detected | |
| [ 3.458531] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
| [ 3.459046] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6 | |
| [ 3.459859] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed | |
| [ 3.460542] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 3.462332] hub 6-0:1.0: USB hub found | |
| [ 3.462718] hub 6-0:1.0: 1 port detected | |
| [ 3.463949] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
| [ 3.464470] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7 | |
| [ 3.467798] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 | |
| [ 3.468812] xhci-hcd xhci-hcd.1.auto: irq 220, io mem 0xfe900000 | |
| [ 3.470988] hub 7-0:1.0: USB hub found | |
| [ 3.471450] hub 7-0:1.0: 1 port detected | |
| [ 3.472348] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
| [ 3.472889] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8 | |
| [ 3.473600] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed | |
| [ 3.474272] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 3.476377] hub 8-0:1.0: USB hub found | |
| [ 3.476780] hub 8-0:1.0: 1 port detected | |
| [ 3.478831] usbcore: registered new interface driver usb-storage | |
| [ 3.489050] i2c /dev entries driver | |
| [ 3.498451] rk808 0-001b: chip id: 0x0 | |
| [ 3.505593] rk808-regulator rk808-regulator: there is no dvs0 gpio | |
| [ 3.506251] rk808-regulator rk808-regulator: there is no dvs1 gpio | |
| [ 3.506887] DCDC_REG1: supplied by vcc_sys | |
| [ 3.508704] DCDC_REG2: supplied by vcc_sys | |
| [ 3.509749] DCDC_REG3: supplied by vcc_sys | |
| [ 3.510434] DCDC_REG4: supplied by vcc_sys | |
| [ 3.511478] LDO_REG1: supplied by vcc_sys | |
| [ 3.513199] LDO_REG2: supplied by vcc_sys | |
| [ 3.514668] LDO_REG3: supplied by vcc_sys | |
| [ 3.516521] LDO_REG4: supplied by vcc_sys | |
| [ 3.517119] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV | |
| [ 3.518775] LDO_REG5: supplied by vcc_sys | |
| [ 3.520395] LDO_REG6: supplied by vcc_sys | |
| [ 3.521916] LDO_REG7: supplied by vcc_sys | |
| [ 3.523350] LDO_REG8: supplied by vcc_sys | |
| [ 3.524908] SWITCH_REG1: supplied by vcc3v3_sys | |
| [ 3.525758] SWITCH_REG2: supplied by vcc3v3_sys | |
| [ 3.530897] rk808-rtc rk808-rtc: registered as rtc0 | |
| [ 3.532463] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! | |
| [ 3.533123] fan53555-reg: supplied by vcc_sys | |
| [ 3.534980] vcc1v8_s3: supplied by vcc_1v8 | |
| [ 3.536537] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! | |
| [ 3.537177] fan53555-reg: supplied by vcc_sys | |
| [ 3.538325] random: fast init done | |
| [ 3.547077] rockchip-rga ff680000.rga: HW Version: 0x03.02 | |
| [ 3.551730] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0 | |
| [ 3.565142] Bluetooth: HCI UART driver ver 2.3 | |
| [ 3.570933] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz | |
| [ 3.572853] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz | |
| [ 3.574755] sdhci: Secure Digital Host Controller Interface driver | |
| [ 3.575325] sdhci: Copyright(c) Pierre Ossman | |
| [ 3.575984] Synopsys Designware Multimedia Card Interface Driver | |
| [ 3.577632] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode. | |
| [ 3.578472] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller. | |
| [ 3.579078] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a | |
| [ 3.579655] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo | |
| [ 3.580662] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO | |
| [ 3.581255] vcc_sdio: unsupportable voltage range: 3300000-3000000uV | |
| [ 3.594604] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) | |
| [ 3.610500] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 3.614107] mmc1: CQHCI version 5.10 | |
| [ 3.640038] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA | |
| [ 3.645522] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 3.649214] usbcore: registered new interface driver usbhid | |
| [ 3.649809] usbhid: USB HID core driver | |
| [ 3.657746] xt_time: kernel timezone is -0000 | |
| [ 3.658171] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP) | |
| [ 3.658949] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) | |
| [ 3.659838] IPVS: ipvs loaded. | |
| [ 3.660115] IPVS: [rr] scheduler registered. | |
| [ 3.660494] IPVS: [wrr] scheduler registered. | |
| [ 3.660880] IPVS: [lc] scheduler registered. | |
| [ 3.661258] IPVS: [wlc] scheduler registered. | |
| [ 3.661645] IPVS: [fo] scheduler registered. | |
| [ 3.662025] IPVS: [ovf] scheduler registered. | |
| [ 3.662418] IPVS: [lblc] scheduler registered. | |
| [ 3.662819] IPVS: [lblcr] scheduler registered. | |
| [ 3.663239] IPVS: [dh] scheduler registered. | |
| [ 3.663620] IPVS: [sh] scheduler registered. | |
| [ 3.663999] IPVS: [sed] scheduler registered. | |
| [ 3.664387] IPVS: [nq] scheduler registered. | |
| [ 3.665126] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully | |
| [ 3.665734] Initializing XFRM netlink socket | |
| [ 3.666601] NET: Registered protocol family 10 | |
| [ 3.667817] Segment Routing with IPv6 | |
| [ 3.668465] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
| [ 3.669398] NET: Registered protocol family 17 | |
| [ 3.669831] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. | |
| [ 3.671086] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 | |
| [ 3.671708] Bluetooth: HIDP socket layer initialized | |
| [ 3.672205] 8021q: 802.1Q VLAN Support v1.8 | |
| [ 3.672661] 9pnet: Installing 9P2000 support | |
| [ 3.673103] Key type dns_resolver registered | |
| [ 3.674263] registered taskstats version 1 | |
| [ 3.675414] Btrfs loaded, crc32c=crc32c-arm64-ce | |
| [ 3.686247] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0) | |
| [ 3.692627] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:09 UTC (1358499009) | |
| [ 3.693394] of_cfs_init | |
| [ 3.693639] of_cfs_init: OK | |
| [ 3.694105] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 | |
| [ 3.694865] cfg80211: failed to load regulatory.db | |
| [ 3.696048] vcc3v3_pcie: disabling | |
| [ 3.696412] ALSA device list: | |
| [ 3.696691] No soundcards found. | |
| [ 3.697418] ttyS2 - failed to request DMA | |
| [ 3.699090] Freeing unused kernel memory: 1408K | |
| Loading, please wait... | |
| starting version 237 | |
| [ 3.829177] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 236 | |
| [ 3.829867] mmc0: new ultra high speed SDR104 SDHC card at address aaaa | |
| [ 3.832219] mmcblk0: mmc0:aaaa SE32G 29.7 GiB | |
| [ 3.842407] mmcblk0: p1 p2 p3 p4 p5 p6 p7 | |
| [ 3.938431] iommu: Adding device ff8f0000.vop to group 0 | |
| [ 3.939065] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu | |
| [ 3.941611] iommu: Adding device ff900000.vop to group 1 | |
| [ 3.942258] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu | |
| [ 3.950310] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop | |
| [ 3.950993] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop | |
| [ 3.952199] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi | |
| [ 3.955565] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm]) | |
| [ 3.958462] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm]) | |
| [ 3.959503] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) | |
| [ 3.968971] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) | |
| [ 3.969851] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
| [ 3.970447] [drm] No driver support for vblank timestamp query. | |
| [ 3.971014] [drm] Cannot find any crtc or sizes | |
| [ 3.972813] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 | |
| Begin: Loading essential drivers ... done. | |
| Begin: Running /scripts/init-premount ... done. | |
| Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. | |
| Begin: Running /scripts/local-premount ... done. | |
| Warning: fsck not present, so skipping root file system | |
| [ 4.201131] EXT4-fs (mmcblk0p7): recovery complete | |
| [ 4.201592] EXT4-fs (mmcblk0p7): mounted filesystem with writeback data mode. Opts: (null) | |
| done. | |
| Begin: Running /scripts/local-bottom ... done. | |
| Begin: Running /scripts/init-bottom ... done. | |
| [ 4.492188] systemd[1]: System time before build time, advancing clock. | |
| [ 4.507129] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) | |
| [ 4.509620] systemd[1]: Detected architecture arm64. | |
| Welcome to Ubuntu 18.04.1 LTS! | |
| [ 4.529812] systemd[1]: Set hostname to <rockpro64>. | |
| [ 4.712204] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. | |
| [ 4.713704] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) | |
| [ 4.828441] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 4.829366] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [ OK ] Started Forward Password Requests to Wall Directory Watch. | |
| [ 4.839522] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 4.840162] systemd[1]: Reached target Remote File Systems. | |
| [ OK ] Reached target Remote File Systems. | |
| [ 4.851505] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 4.852397] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| [ OK ] Started Dispatch Password Requests to Console Directory Watch. | |
| [ 4.855097] systemd[1]: Created slice User and Session Slice. | |
| [ OK ] Created slice User and Session Slice. | |
| [ 4.871379] systemd[1]: Reached target Swap. | |
| [ OK ] Reached target Swap. | |
| [ OK ] Created slice System Slice. | |
| [ OK ] Listening on /dev/initctl Compatibility Named Pipe. | |
| [ OK ] Created slice system-serial\x2dgetty.slice. | |
| [ OK ] Listening on udev Control Socket. | |
| [ OK ] Reached target Slices. | |
| [ OK ] Started ntp-systemd-netif.path. | |
| [ OK ] Reached target Local Encrypted Volumes. | |
| [ OK ] Listening on Journal Audit Socket. | |
| [ 4.979331] [drm] Cannot find any crtc or sizes | |
| [ OK ] Reached target System Time Synchronized. | |
| [ OK ] Listening on Journal Socket. | |
| Starting Load Kernel Modules... | |
| Starting Nameserver information manager... | |
| Mounting Huge Pages File System... | |
| Starting Set the console keyboard layout... | |
| Starting Remount Root and Kernel File Systems... | |
| Starting Create list of required st…ce nodes for the current kernel... | |
| [ OK ] Listening on udev Kernel Socket. | |
| Mounting Kernel Debug File System... | |
| Mounting POSIX Message Queue File System... | |
| Starting Restore / save the current clock... | |
| [ OK ] Listening on Syslog Socket. | |
| Starting udev Coldplug all Devices... | |
| [ OK ] Listening on Journal Socket (/dev/log). | |
| Starting Journal Service... | |
| [ OK ] Started Load Kernel Modules. | |
| [ OK ] Mounted Huge Pages File System. | |
| [ OK ] Started Remount Root and Kernel File Systems. | |
| [ OK ] Started Create list of required sta…vice nodes for the current kernel. | |
| [ OK ] Started Journal Service. | |
| [ OK ] Mounted Kernel Debug File System. | |
| [ OK ] Mounted POSIX Message Queue File System. | |
| [ OK ] Started Restore / save the current clock. | |
| [ OK ] Started Nameserver information manager. | |
| [ OK ] Started Set the console keyboard layout. | |
| [ OK ] Reached target Network (Pre). | |
| Starting Create Static Device Nodes in /dev... | |
| Starting Load/Save Random Seed... | |
| Starting Flush Journal to Persistent Storage... | |
| Starting Apply Kernel Variables... | |
| Mounting Kernel Configuration File System... | |
| Mounting FUSE Control File System... | |
| [ OK ] Started udev Coldplug all Devices. | |
| [ OK ] Started Create Static Device Nodes in /dev. | |
| [ OK ] Started Load/Save Random Seed. | |
| [ OK ] Started Apply Kernel Variables. | |
| [ OK ] Mounted Kernel Configuration File System. | |
| [ OK ] Mounted FUSE Control File System. | |
| [ OK ] Reached target Local File Systems (Pre). | |
| Starting udev Kernel Device Manager... | |
| [ OK ] Started udev Kernel Device Manager. | |
| Starting Network Service... | |
| [ OK ] Found device /dev/ttyS2. | |
| [ 5.768766] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff880000.i2s; cannot claim for 1-0010 | |
| [ 5.769648] rockchip-pinctrl pinctrl: pin-128 (1-0010) status -22 | |
| [ 5.770185] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) from group i2s-8ch-mclk on device rockchip-pinctrl | |
| [ 5.771171] es8316 1-0010: Error applying setting, reverse things back | |
| [ OK ] Started Network Service. | |
| [ OK ] Started Flush Journal to Persistent Storage. | |
| [ 5.872565] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP | |
| [ 5.873251] Modules linked in: pcie_rockchip_host(+) snd_soc_es8316 phy_rockchip_pcie rockchipdrm analogix_dp | |
| [ 5.874165] CPU: 1 PID: 2299 Comm: systemd-udevd Not tainted 4.18.0-rc8-1060-ayufan-g45828c4db727 #1 | |
| [ 5.874168] Hardware name: Pine64 RockPro64 (DT) | |
| [ 5.874172] pstate: 60000085 (nZCv daIf -PAN -UAO) | |
| [ 5.874185] pc : rockchip_pcie_rd_conf+0x18c/0x1f8 [pcie_rockchip_host] | |
| [ 5.874190] lr : rockchip_pcie_rd_conf+0x17c/0x1f8 [pcie_rockchip_host] | |
| [ 5.874192] sp : ffff00000dd0b730 | |
| [ 5.874194] x29: ffff00000dd0b730 x28: 0000000000000001 | |
| [ 5.874198] x27: 0000000000000000 x26: 0000000000000000 | |
| [ 5.874202] x25: 0000000000000000 x24: ffff00000dd0b854 | |
| [ 5.874206] x23: ffff8000ef513000 x22: ffff00000dd0b7b4 | |
| [ 5.874210] x21: ffff8000ef516b98 x20: 0000000000000004 | |
| [ 5.874214] x19: ffff00000e100000 x18: ffffffffffffffff | |
| [ 5.874218] x17: 0000000000000000 x16: 0000000000000000 | |
| [ 5.874221] x15: ffff000009a1b508 x14: 303a303030302f30 | |
| [ 5.874225] x13: 0000000000000040 x12: 0000000000000228 | |
| [ 5.874229] x11: 0000000000000000 x10: 0000000000000000 | |
| [ 5.874233] x9 : 0000000000000000 x8 : 0000000000000000 | |
| [ 5.874236] x7 : 0000000000000000 x6 : 0000000000000000 | |
| [ 5.874240] x5 : 0000000000100000 x4 : 0000000000c00008 | |
| [ 5.874244] x3 : ffff000011000000 x2 : 000000000080000a | |
| [ 5.874248] x1 : ffff000011c00008 x0 : ffff00000e000000 | |
| [ 5.874253] Process systemd-udevd (pid: 2299, stack limit = 0x(____ptrval____)) | |
| [ 5.874255] Call trace: | |
| [ 5.874261] rockchip_pcie_rd_conf+0x18c/0x1f8 [pcie_rockchip_host] | |
| [ 5.874274] pci_bus_read_config_dword+0x84/0xe0 | |
| [ 5.874279] pci_bus_read_dev_vendor_id+0x2c/0x1a0 | |
| [ 5.874283] pci_scan_single_device+0x78/0xf8 | |
| [ 5.874285] pci_scan_slot+0x34/0xf0 | |
| [ 5.874289] pci_scan_child_bus_extend+0x50/0x290 | |
| [ 5.874291] pci_scan_bridge_extend+0x2ec/0x4e0 | |
| [ 5.874294] pci_scan_child_bus_extend+0x1e4/0x290 | |
| [ 5.874297] pci_scan_root_bus_bridge+0x58/0xd8 | |
| [ 5.874302] rockchip_pcie_probe+0x60c/0x750 [pcie_rockchip_host] | |
| [ 5.874310] platform_drv_probe+0x50/0xa0 | |
| [ 5.874314] driver_probe_device+0x208/0x2e8 | |
| [ 5.874317] __driver_attach+0xd4/0xd8 | |
| [ 5.874321] bus_for_each_dev+0x74/0xc8 | |
| [ 5.874324] driver_attach+0x20/0x28 | |
| [ 5.874331] bus_add_driver+0x1ac/0x218 | |
| [ 5.874335] driver_register+0x60/0x110 | |
| [ 5.874339] __platform_driver_register+0x40/0x48 | |
| [ 5.874344] rockchip_pcie_driver_init+0x20/0x1000 [pcie_rockchip_host] | |
| [ 5.874350] do_one_initcall+0x5c/0x178 | |
| [ 5.874357] do_init_module+0x58/0x1b0 | |
| [ 5.874360] load_module+0x1e14/0x2210 | |
| [ 5.874364] sys_finit_module+0xcc/0xe8 | |
| [ 5.874367] __sys_trace_return+0x0/0x4 | |
| [ 5.874372] Code: 7100129f 54fff921 f94002a0 8b130013 (b9400273) | |
| [ 5.874377] ---[ end trace f6962883a029ddc3 ]--- | |
| [ 5.874383] note: systemd-udevd[2299] exited with preempt_count 1 | |
| [ OK ] Found device /dev/disk/by-label/boot. | |
| [ 5.971910] random: crng init done | |
| [ 5.972239] random: 7 urandom warning(s) missed due to ratelimiting | |
| Mounting /boot/efi... | |
| [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. | |
| [ 6.098878] FAT-fs (mmcblk0p6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| [ OK ] Mounted /boot/efi. | |
| [ OK ] Reached target Local File Systems. | |
| Starting Raise network interfaces... | |
| Starting Set console font and keymap... | |
| Starting Create Volatile Files and Directories... | |
| [ OK ] Started Set console font and keymap. | |
| [ OK ] Started Create Volatile Files and Directories. | |
| Starting Network Time Synchronization... | |
| Starting Network Name Resolution... | |
| Starting Update UTMP about System Boot/Shutdown... | |
| [ OK ] Started Update UTMP about System Boot/Shutdown. | |
| [ OK ] Started Raise network interfaces. | |
| [ OK ] Started Network Name Resolution. | |
| [ OK ] Reached target Host and Network Name Lookups. | |
| [ OK ] Started Network Time Synchronization. | |
| [ OK ] Reached target System Initialization. | |
| [ OK ] Listening on D-Bus System Message Bus Socket. | |
| [ OK ] Reached target Sockets. | |
| [ OK ] Started Message of the Day. | |
| [ OK ] Started Discard unused blocks once a week. | |
| [ OK ] Started resolvconf-pull-resolved.path. | |
| [ OK ] Reached target Paths. | |
| [ OK ] Started Daily apt download activities. | |
| [ OK ] Started Daily apt upgrade and clean activities. | |
| [ OK ] Started Daily Cleanup of Temporary Directories. | |
| [ OK ] Reached target Timers. | |
| [ OK ] Reached target Basic System. | |
| [ OK ] Started Regular background program processing daemon. | |
| Starting resolvconf-pull-resolved.service... | |
| Starting Initializes zram swaping... | |
| Starting Dispatcher daemon for systemd-networkd... | |
| Starting System Logging Service... | |
| Starting Generate SSH keys if not there... | |
| [ OK ] Started Set the CPU Frequency Scaling governor. | |
| [ OK ] Started D-Bus System Message Bus. | |
| Starting WPA supplicant... | |
| Starting Login Service... | |
| Starting Network Manager... | |
| [ OK ] Started ntp-systemd-netif.service. | |
| Starting Rock 64 First boot... | |
| Starting Resets System Activity Data Collector... | |
| [ OK ] Started System Logging Service. | |
| [ OK ] Started resolvconf-pull-resolved.service. | |
| [FAILED] Failed to start Initializes zram swaping. | |
| See 'systemctl status zram-config.service' for details. | |
| [ OK ] Started Generate SSH keys if not there. | |
| [ OK ] Started Rock 64 First boot. | |
| [ OK ] Started Resets System Activity Data Collector. | |
| [ OK ] Started Login Service. | |
| [ OK ] Started WPA supplicant. | |
| Starting Hostname Service... | |
| [ OK ] Started Hostname Service. | |
| [ OK ] Started Network Manager. | |
| Starting Network Manager Script Dispatcher Service... | |
| [ OK ] Reached target Network. | |
| Starting Permit User Sessions... | |
| Starting Real time performance monitoring... | |
| Starting OpenBSD Secure Shell server... | |
| [ OK ] Started Permit User Sessions. | |
| [ OK ] Started Network Manager Script Dispatcher Service. | |
| [ OK ] Started Serial Getty on ttyS2. | |
| Starting Set console scheme... | |
| [ OK ] Started Set console scheme. | |
| [ OK ] Created slice system-getty.slice. | |
| [ OK ] Started Getty on tty1. | |
| [ OK ] Reached target Login Prompts. | |
| [ OK ] Started OpenBSD Secure Shell server. | |
| [ OK ] Started Dispatcher daemon for systemd-networkd. | |
| Starting Authorization Manager... | |
| [ OK ] Started Authorization Manager. | |
| [ OK ] Started Real time performance monitoring. | |
| [ OK ] Reached target Multi-User System. | |
| [ OK ] Reached target Graphical Interface. | |
| Starting Update UTMP about System Runlevel Changes... | |
| [ OK ] Started Update UTMP about System Runlevel Changes. | |
| Ubuntu 18.04.1 LTS rockpro64 ttyS2 | |
| rockpro64 login: [ 8.948024] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx | |
| [ 8.948803] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| DDR Version 1.12 20180518 | |
| In | |
| Channel 0: LPDDR4,50MHz | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x4D | |
| MR14=0x4D | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x4D | |
| MR14=0x4D | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB | |
| Channel 1: LPDDR4,50MHz | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x4D | |
| MR14=0x4D | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x4D | |
| MR14=0x4D | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB | |
| 256B stride | |
| channel 0 | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| channel 1 | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x3 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| channel 0 training pass! | |
| channel 1 training pass! | |
| change freq to 400MHz 0,1 | |
| channel 0 | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x81 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x82 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| channel 1 | |
| CS = 0 | |
| MR0=0x98 | |
| MR4=0x81 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| CS = 1 | |
| MR0=0x18 | |
| MR4=0x81 | |
| MR5=0xFF | |
| MR8=0x8 | |
| MR12=0x72 | |
| MR14=0x72 | |
| MR18=0x0 | |
| MR19=0x0 | |
| MR24=0x8 | |
| MR25=0x0 | |
| channel 0 training pass! | |
| channel 1 training pass! | |
| change freq to 800MHz 1,0 | |
| ch 0 ddrconfig = 0x101, ddrsize = 0x2020 | |
| ch 1 ddrconfig = 0x101, ddrsize = 0x2020 | |
| pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD | |
| OUT | |
| U-Boot SPL board init | |
| U-Boot SPL 2017.09-rockchip-ayufan-1025-g482cd6ec8b (Jul 26 2018 - 08:18:48) | |
| booted from SD | |
| Trying to boot from MMC2 | |
| NOTICE: BL31: v1.3(debug):d98d16e | |
| NOTICE: BL31: Built : 15:03:07, May 10 2018 | |
| NOTICE: BL31: Rockchip release version: v1.1 | |
| INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 | |
| INFO: Using opteed sec cpu_context! | |
| INFO: boot cpu mask: 0 | |
| INFO: plat_rockchip_pmu_init(1151): pd status 3e | |
| INFO: BL31: Initializing runtime services | |
| WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK | |
| ERROR: Error initializing runtime service opteed_fast | |
| INFO: BL31: Preparing for EL3 exit to normal world | |
| INFO: Entry point address = 0x200000 | |
| INFO: SPSR = 0x3c9 | |
| U-Boot 2017.09-rockchip-ayufan-1025-g482cd6ec8b (Jul 26 2018 - 08:18:55 +0000) | |
| Model: Pine64 RockPro64 | |
| DRAM: 3.9 GiB | |
| DCDC_REG1@vdd_center: ; enabling | |
| DCDC_REG2@vdd_cpu_l: ; enabling | |
| DCDC_REG3@vcc_ddr: ; enabling (ret: -38) | |
| DCDC_REG4@vcc_1v8: set 1800000 uV; enabling | |
| LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling | |
| LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling | |
| LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling | |
| LDO_REG4@vcc_sd: set 3300000 uV; enabling | |
| LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling | |
| LDO_REG6@vcc_1v5: set 1500000 uV; enabling | |
| LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling | |
| LDO_REG8@vcc_3v0: set 3000000 uV; enabling | |
| SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38) | |
| SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38) | |
| vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38) | |
| dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38) | |
| vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38) | |
| vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38) | |
| vcc-phy-regulator@vcc_phy: ; enabling (ret: -38) | |
| vdd-log@vdd_log: ; enabling (ret: -38) | |
| MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1 | |
| SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB | |
| *** Warning - bad CRC, using default environment | |
| In: serial@ff1a0000 | |
| Out: serial@ff1a0000 | |
| Err: serial@ff1a0000 | |
| Model: Pine64 RockPro64 | |
| Net: eth0: ethernet@fe300000 | |
| Hit any key to stop autoboot: 0 | |
| Card did not respond to voltage select! | |
| mmc_init: -95, time 19 | |
| switch to partitions #0, OK | |
| mmc1 is current device | |
| Scanning mmc 1:7... | |
| Found /boot/extlinux/extlinux.conf | |
| Retrieving file: /boot/extlinux/extlinux.conf | |
| 2025 bytes read in 15 ms (131.8 KiB/s) | |
| select kernel | |
| 1: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727 | |
| 2: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727-memtest | |
| 3: kernel-4.4.132-1075-rockchip-ayufan-ga83beded8524 | |
| 4: kernel-4.4.132-1075-rockchip-ayufan-ga83beded8524-memtest | |
| Enter choice: 1: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727 | |
| Retrieving file: /boot/initrd.img-4.18.0-rc8-1060-ayufan-g45828c4db727 | |
| 5674214 bytes read in 265 ms (20.4 MiB/s) | |
| Retrieving file: /boot/vmlinuz-4.18.0-rc8-1060-ayufan-g45828c4db727 | |
| 28656128 bytes read in 1258 ms (21.7 MiB/s) | |
| append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=5e:7f:67:f2:16:df eth1addr= serial=b036de364fed6ee cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 | |
| Retrieving file: /boot/dtbs/4.18.0-rc8-1060-ayufan-g45828c4db727/rockchip/rk3399-rockpro64.dtb | |
| 54350 bytes read in 50 ms (1 MiB/s) | |
| ## Flattened Device Tree blob at 01f00000 | |
| Booting using the fdt blob at 0x1f00000 | |
| Loading Ramdisk to f599a000, end f5f034e6 ... OK | |
| Loading Device Tree to 00000000f5989000, end 00000000f599944d ... OK | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
| [ 0.000000] Linux version 4.18.0-rc8-1060-ayufan-g45828c4db727 (root@runner-f725ff63-project-6422644-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3)) #1 SMP PREEMPT Thu Aug 9 19:41:21 UTC 2018 | |
| [ 0.000000] Machine model: Pine64 RockPro64 | |
| [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '') | |
| [ 0.000000] bootconsole [uart8250] enabled | |
| [ 0.000000] efi: Getting EFI parameters from FDT: | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000 | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7ffffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa6f00-0xf6fa86bf] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.0 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.0 | |
| [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0 | |
| [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56216 r8192 d29800 u94208 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 | |
| [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432 | |
| [ 0.000000] Policy zone: DMA32 | |
| [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=5e:7f:67:f2:16:df eth1addr= serial=b036de364fed6ee cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 | |
| [ 0.000000] Memory: 3944244K/4061184K available (17532K kernel code, 1808K rwdata, 7200K rodata, 1408K init, 477K bss, 100556K reserved, 16384K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 | |
| [ 0.000000] Preemptible hierarchical RCU implementation. | |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. | |
| [ 0.000000] Tasks RCU enabled. | |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: Distributor has no Range Selector support | |
| [ 0.000000] GICv3: no VLPI support, no direct LPI support | |
| [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff] | |
| [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f2080000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GIC: using LPI property table @0x00000000f2040000 | |
| [ 0.000000] ITS: Allocated 1792 chunks for LPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000 | |
| [ 0.000000] CPU0: using LPI pending table @0x00000000f2050000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } | |
| [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
| [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
| [ 0.002570] Console: colour dummy device 80x25 | |
| [ 0.002995] console [tty0] enabled | |
| [ 0.003326] bootconsole [uart8250] disabled | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
| [ 0.000000] Linux version 4.18.0-rc8-1060-ayufan-g45828c4db727 (root@runner-f725ff63-project-6422644-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3)) #1 SMP PREEMPT Thu Aug 9 19:41:21 UTC 2018 | |
| [ 0.000000] Machine model: Pine64 RockPro64 | |
| [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '') | |
| [ 0.000000] bootconsole [uart8250] enabled | |
| [ 0.000000] efi: Getting EFI parameters from FDT: | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000 | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7ffffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa6f00-0xf6fa86bf] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff] | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.0 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.0 | |
| [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0 | |
| [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56216 r8192 d29800 u94208 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 | |
| [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432 | |
| [ 0.000000] Policy zone: DMA32 | |
| [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=5e:7f:67:f2:16:df eth1addr= serial=b036de364fed6ee cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4 | |
| [ 0.000000] Memory: 3944244K/4061184K available (17532K kernel code, 1808K rwdata, 7200K rodata, 1408K init, 477K bss, 100556K reserved, 16384K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 | |
| [ 0.000000] Preemptible hierarchical RCU implementation. | |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. | |
| [ 0.000000] Tasks RCU enabled. | |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: Distributor has no Range Selector support | |
| [ 0.000000] GICv3: no VLPI support, no direct LPI support | |
| [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff] | |
| [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f2080000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GIC: using LPI property table @0x00000000f2040000 | |
| [ 0.000000] ITS: Allocated 1792 chunks for LPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000 | |
| [ 0.000000] CPU0: using LPI pending table @0x00000000f2050000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } | |
| [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] rockchip_mmc_get_phase: invalid clk rate | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
| [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
| [ 0.002570] Console: colour dummy device 80x25 | |
| [ 0.002995] console [tty0] enabled | |
| [ 0.003326] bootconsole [uart8250] disabled | |
| [ 0.003796] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) | |
| [ 0.003832] pid_max: default: 32768 minimum: 301 | |
| [ 0.003954] Security Framework initialized | |
| [ 0.006030] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) | |
| [ 0.007080] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) | |
| [ 0.007170] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) | |
| [ 0.007224] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) | |
| [ 0.030643] ASID allocator initialised with 32768 entries | |
| [ 0.038637] Hierarchical SRCU implementation. | |
| [ 0.046759] Platform MSI: interrupt-controller@fee20000 domain created | |
| [ 0.047164] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created | |
| [ 0.051372] EFI services will not be available. | |
| [ 0.059277] smp: Bringing up secondary CPUs ... | |
| [ 0.091494] Detected VIPT I-cache on CPU1 | |
| [ 0.091531] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000 | |
| [ 0.091573] CPU1: using LPI pending table @0x00000000f1440000 | |
| [ 0.091619] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
| [ 0.123574] Detected VIPT I-cache on CPU2 | |
| [ 0.123602] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000 | |
| [ 0.123642] CPU2: using LPI pending table @0x00000000f1480000 | |
| [ 0.123675] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | |
| [ 0.155674] Detected VIPT I-cache on CPU3 | |
| [ 0.155702] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000 | |
| [ 0.155740] CPU3: using LPI pending table @0x00000000f1490000 | |
| [ 0.155772] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | |
| [ 0.190344] CPU features: enabling workaround for EL2 vector hardening | |
| [ 0.190798] Detected PIPT I-cache on CPU4 | |
| [ 0.192020] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000 | |
| [ 0.194538] CPU4: using LPI pending table @0x00000000f14d0000 | |
| [ 0.195785] CPU4: Booted secondary processor 0x0000000100 [0x410fd082] | |
| [ 0.233955] Detected PIPT I-cache on CPU5 | |
| [ 0.235126] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000 | |
| [ 0.237603] CPU5: using LPI pending table @0x00000000f1500000 | |
| [ 0.238727] CPU5: Booted secondary processor 0x0000000101 [0x410fd082] | |
| [ 0.242543] smp: Brought up 1 node, 6 CPUs | |
| [ 0.242927] SMP: Total of 6 processors activated. | |
| [ 0.242963] CPU features: detected: GIC system register CPU interface | |
| [ 0.242989] CPU features: detected: 32-bit EL0 Support | |
| [ 0.333427] CPU: All CPU(s) started at EL2 | |
| [ 0.333908] alternatives: patching kernel code | |
| [ 0.337971] devtmpfs: initialized | |
| [ 0.355816] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.356037] futex hash table entries: 2048 (order: 5, 131072 bytes) | |
| [ 0.358130] xor: measuring software checksum speed | |
| [ 0.395170] 8regs : 1152.000 MB/sec | |
| [ 0.435362] 8regs_prefetch: 1026.000 MB/sec | |
| [ 0.475581] 32regs : 1415.000 MB/sec | |
| [ 0.515795] 32regs_prefetch: 1228.000 MB/sec | |
| [ 0.515815] xor: using function: 32regs (1415.000 MB/sec) | |
| [ 0.515858] pinctrl core: initialized pinctrl subsystem | |
| [ 0.519151] DMI not present or invalid. | |
| [ 0.520699] NET: Registered protocol family 16 | |
| [ 0.524756] audit: initializing netlink subsys (disabled) | |
| [ 0.525249] audit: type=2000 audit(0.516:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.531833] cpuidle: using governor menu | |
| [ 0.533348] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____)) | |
| [ 0.533538] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.542368] DMA: preallocated 1024 KiB pool for atomic allocatior: 4, 65536 bytes) | |
| [ 1.817744] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) | |
| [ 1.818186] NET: Registered protocol family 1 | |
| [ 1.823423] RPC: Registered named UNIX socket transport module. | |
| [ 1.823475] RPC: Registered udp transport module. | |
| [ 1.823493] RPC: Registered tcp transport module. | |
| [ 1.823511] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 1.825776] Trying to unpack rootfs image as initramfs... | |
| [ 2.273012] Freeing initrd memory: 5540K | |
| [ 2.282311] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available | |
| [ 2.285047] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available | |
| [ 2.285971] kvm [1]: 8-bit VMID | |
| [ 2.288510] kvm [1]: vgic-v2@fff20000 | |
| [ 2.289945] kvm [1]: GIC system register CPU interface enabled | |
| [ 2.292562] kvm [1]: vgic interrupt IRQ10 | |
| [ 2.295271] kvm [1]: Hyp mode initialized successfully | |
| [ 2.315952] workingset: timestamp_bits=44 max_order=20 bucket_order=0 | |
| [ 2.332761] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 2.335146] NFS: Registering the id_resolver key type | |
| [ 2.335358] Key type id_resolver registered | |
| [ 2.335379] Key type id_legacy registered | |
| [ 2.335407] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 2.335431] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). | |
| [ 2.337299] fuse init (API version 7.27) | |
| [ 2.339093] 9p: Installing v9fs 9p2000 file system support | |
| [ 2.340537] pstore: using deflate compression | |
| [ 2.388202] NET: Registered protocol family 38 | |
| [ 2.388650] Key type asymmetric registered | |
| [ 2.388672] Asymmetric key parser 'x509' registered | |
| [ 2.389529] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) | |
| [ 2.390132] io scheduler noop registered | |
| [ 2.390903] io scheduler cfq registered (default) | |
| [ 2.390931] io scheduler mq-deadline registered | |
| [ 2.390952] io scheduler kyber registered | |
| [ 2.401311] vcc5v0_host: supplied by vcc_sys | |
| [ 2.456250] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| [ 2.456592] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 | |
| [ 2.502590] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| [ 2.502928] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 | |
| [ 2.512107] pwm-regulator: supplied by vcc_sys | |
| [ 2.513359] vcc3v3_sys: supplied by vcc_sys | |
| [ 2.524501] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 2.529130] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A | |
| [ 2.531965] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A | |
| [ 2.641321] console [ttyS2] enabled | |
| [ 2.644952] SuperH (H)SCI(F) driver initialized | |
| [ 2.646975] msm_serial: driver initialized | |
| [ 2.670991] cacheinfo: Unable to detect cache hierarchy for CPU 0 | |
| [ 2.700103] brd: module loaded | |
| [ 2.717756] loop: module loaded | |
| [ 2.769786] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel | |
| [ 2.770902] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel | |
| [ 2.775133] m25p80 spi0.0: gd25q128 (16384 Kbytes) | |
| [ 2.822474] 3 fixed-partitions partitions found on MTD device spi0.0 | |
| [ 2.823398] Creating 3 MTD partitions on "spi0.0": | |
| [ 2.823871] 0x000000000000-0x0000003f8000 : "loader" | |
| [ 2.827338] 0x0000003f8000-0x000000400000 : "env" | |
| [ 2.829680] 0x0000007c0000-0x000000800000 : "vendor" | |
| [ 2.837683] libphy: Fixed MDIO Bus: probed | |
| [ 2.840444] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 2.845974] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k | |
| [ 2.847010] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| [ 2.847839] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k | |
| [ 2.848482] igb: Copyright (c) 2007-2014 Intel Corporation. | |
| [ 2.849057] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k | |
| [ 2.849767] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | |
| [ 2.851467] sky2: driver version 1.30 | |
| [ 2.855589] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock | |
| [ 2.856430] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input). | |
| [ 2.857076] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28). | |
| [ 2.857593] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20). | |
| [ 2.858112] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no). | |
| [ 2.858786] rk_gmac-dwmac fe300000.ethernet: clock input from PHY | |
| [ 2.864362] rk_gmac-dwmac fe300000.ethernet: init for RGMII | |
| [ 2.867839] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35 | |
| [ 2.868504] rk_gmac-dwmac fe300000.ethernet: DWMAC1000 | |
| [ 2.868987] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported | |
| [ 2.869665] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported | |
| [ 2.870342] rk_gmac-dwmac fe300000.ethernet: COE Type 2 | |
| [ 2.870853] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported | |
| [ 2.871492] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported | |
| [ 2.872163] rk_gmac-dwmac fe300000.ethernet: Normal descriptors | |
| [ 2.872702] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled | |
| [ 2.873232] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer | |
| [ 3.021634] libphy: stmmac: probed | |
| [ 3.022133] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) | |
| [ 3.023283] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) | |
| [ 3.028044] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver | |
| [ 3.028975] usbcore: registered new interface driver pegasus | |
| [ 3.029634] usbcore: registered new interface driver rtl8150 | |
| [ 3.030260] usbcore: registered new interface driver r8152 | |
| [ 3.030946] usbcore: registered new interface driver asix | |
| [ 3.031499] usbcore: registered new interface driver ax88179_178a | |
| [ 3.032118] usbcore: registered new interface driver cdc_ether | |
| [ 3.032719] usbcore: registered new interface driver dm9601 | |
| [ 3.033292] usbcore: registered new interface driver CoreChips | |
| [ 3.033897] usbcore: registered new interface driver smsc75xx | |
| [ 3.034489] usbcore: registered new interface driver smsc95xx | |
| [ 3.035121] usbcore: registered new interface driver net1080 | |
| [ 3.035689] usbcore: registered new interface driver plusb | |
| [ 3.036243] usbcore: registered new interface driver cdc_subset | |
| [ 3.036856] usbcore: registered new interface driver MOSCHIP usb-ethernet driver | |
| [ 3.037621] usbcore: registered new interface driver cdc_ncm | |
| [ 3.039175] VFIO - User Level meta-driver version: 0.3 | |
| [ 3.044090] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2 | |
| [ 3.059212] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port | |
| [ 3.067049] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2 | |
| [ 3.075486] phy phy-ff800000.phy.8: phy poweron failed --> -110 | |
| [ 3.076159] dwc3 fe900000.dwc3: failed to initialize core | |
| [ 3.076934] dwc3: probe of fe900000.dwc3 failed with error -110 | |
| [ 3.080521] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 3.081229] ehci-pci: EHCI PCI platform driver | |
| [ 3.081913] ehci-platform: EHCI generic platform driver | |
| [ 3.085130] ehci-platform fe380000.usb: EHCI Host Controller | |
| [ 3.085718] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1 | |
| [ 3.089557] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000 | |
| [ 3.102647] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 3.105089] hub 1-0:1.0: USB hub found | |
| [ 3.105496] hub 1-0:1.0: 1 port detected | |
| [ 3.110500] ehci-platform fe3c0000.usb: EHCI Host Controller | |
| [ 3.111091] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2 | |
| [ 3.113592] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000 | |
| [ 3.126626] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 3.128661] hub 2-0:1.0: USB hub found | |
| [ 3.129054] hub 2-0:1.0: 1 port detected | |
| [ 3.130384] ehci-orion: EHCI orion driver | |
| [ 3.131382] ehci-exynos: EHCI EXYNOS driver | |
| [ 3.132098] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 3.132786] ohci-pci: OHCI PCI platform driver | |
| [ 3.133344] ohci-platform: OHCI generic platform driver | |
| [ 3.134189] ohci-platform fe3a0000.usb: Generic Platform OHCI controller | |
| [ 3.134947] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3 | |
| [ 3.137425] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000 | |
| [ 3.200223] hub 3-0:1.0: USB hub found | |
| [ 3.200617] hub 3-0:1.0: 1 port detected | |
| [ 3.202026] ohci-platform fe3e0000.usb: Generic Platform OHCI controller | |
| [ 3.202793] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4 | |
| [ 3.204402] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000 | |
| [ 3.268032] hub 4-0:1.0: USB hub found | |
| [ 3.268441] hub 4-0:1.0: 1 port detected | |
| [ 3.269807] ohci-exynos: OHCI EXYNOS driver | |
| [ 3.272057] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
| [ 3.272607] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5 | |
| [ 3.277554] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 | |
| [ 3.278520] xhci-hcd xhci-hcd.0.auto: irq 219, io mem 0xfe800000 | |
| [ 3.281273] hub 5-0:1.0: USB hub found | |
| [ 3.281666] hub 5-0:1.0: 1 port detected | |
| [ 3.282774] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
| [ 3.283293] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6 | |
| [ 3.284007] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed | |
| [ 3.284686] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 3.286679] hub 6-0:1.0: USB hub found | |
| [ 3.287064] hub 6-0:1.0: 1 port detected | |
| [ 3.288946] usbcore: registered new interface driver usb-storage | |
| [ 3.299143] i2c /dev entries driver | |
| [ 3.311437] rk808 0-001b: chip id: 0x0 | |
| [ 3.318035] rk808-regulator rk808-regulator: there is no dvs0 gpio | |
| [ 3.318902] rk808-regulator rk808-regulator: there is no dvs1 gpio | |
| [ 3.319553] DCDC_REG1: supplied by vcc_sys | |
| [ 3.321343] DCDC_REG2: supplied by vcc_sys | |
| [ 3.322297] DCDC_REG3: supplied by vcc_sys | |
| [ 3.323088] DCDC_REG4: supplied by vcc_sys | |
| [ 3.324075] LDO_REG1: supplied by vcc_sys | |
| [ 3.325674] LDO_REG2: supplied by vcc_sys | |
| [ 3.327190] LDO_REG3: supplied by vcc_sys | |
| [ 3.328722] LDO_REG4: supplied by vcc_sys | |
| [ 3.329289] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV | |
| [ 3.331021] LDO_REG5: supplied by vcc_sys | |
| [ 3.332476] LDO_REG6: supplied by vcc_sys | |
| [ 3.333940] LDO_REG7: supplied by vcc_sys | |
| [ 3.335384] LDO_REG8: supplied by vcc_sys | |
| [ 3.336931] SWITCH_REG1: supplied by vcc3v3_sys | |
| [ 3.337800] SWITCH_REG2: supplied by vcc3v3_sys | |
| [ 3.343302] rk808-rtc rk808-rtc: registered as rtc0 | |
| [ 3.344910] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! | |
| [ 3.345593] fan53555-reg: supplied by vcc_sys | |
| [ 3.347761] vcc1v8_s3: supplied by vcc_1v8 | |
| [ 3.349039] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! | |
| [ 3.349680] fan53555-reg: supplied by vcc_sys | |
| [ 3.351167] random: fast init done | |
| [ 3.360197] rockchip-rga ff680000.rga: HW Version: 0x03.02 | |
| [ 3.365607] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0 | |
| [ 3.380438] Bluetooth: HCI UART driver ver 2.3 | |
| [ 3.387063] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz | |
| [ 3.388965] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz | |
| [ 3.391039] sdhci: Secure Digital Host Controller Interface driver | |
| [ 3.391597] sdhci: Copyright(c) Pierre Ossman | |
| [ 3.392275] Synopsys Designware Multimedia Card Interface Driver | |
| [ 3.393921] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode. | |
| [ 3.394755] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller. | |
| [ 3.395361] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a | |
| [ 3.395906] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo | |
| [ 3.396897] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO | |
| [ 3.397523] vcc_sdio: unsupportable voltage range: 3300000-3000000uV | |
| [ 3.410762] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) | |
| [ 3.426822] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 3.430153] mmc1: CQHCI version 5.10 | |
| [ 3.456841] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA | |
| [ 3.462337] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 3.465357] usbcore: registered new interface driver usbhid | |
| [ 3.465899] usbhid: USB HID core driver | |
| [ 3.474287] xt_time: kernel timezone is -0000 | |
| [ 3.474806] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP) | |
| [ 3.475678] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) | |
| [ 3.476569] IPVS: ipvs loaded. | |
| [ 3.476845] IPVS: [rr] scheduler registered. | |
| [ 3.477224] IPVS: [wrr] scheduler registered. | |
| [ 3.477610] IPVS: [lc] scheduler registered. | |
| [ 3.477988] IPVS: [wlc] scheduler registered. | |
| [ 3.478374] IPVS: [fo] scheduler registered. | |
| [ 3.478855] IPVS: [ovf] scheduler registered. | |
| [ 3.479259] IPVS: [lblc] scheduler registered. | |
| [ 3.479684] IPVS: [lblcr] scheduler registered. | |
| [ 3.480092] IPVS: [dh] scheduler registered. | |
| [ 3.480471] IPVS: [sh] scheduler registered. | |
| [ 3.480850] IPVS: [sed] scheduler registered. | |
| [ 3.481235] IPVS: [nq] scheduler registered. | |
| [ 3.481989] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully | |
| [ 3.482601] Initializing XFRM netlink socket | |
| [ 3.483398] NET: Registered protocol family 10 | |
| [ 3.484492] Segment Routing with IPv6 | |
| [ 3.485098] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
| [ 3.485982] NET: Registered protocol family 17 | |
| [ 3.486411] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. | |
| [ 3.487678] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 | |
| [ 3.488206] Bluetooth: HIDP socket layer initialized | |
| [ 3.488676] 8021q: 802.1Q VLAN Support v1.8 | |
| [ 3.489077] 9pnet: Installing 9P2000 support | |
| [ 3.489510] Key type dns_resolver registered | |
| [ 3.490703] registered taskstats version 1 | |
| [ 3.491877] Btrfs loaded, crc32c=crc32c-arm64-ce | |
| [ 3.505129] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0) | |
| [ 3.512480] rk808-rtc rk808-rtc: setting system clock to 2018-08-11 20:37:32 UTC (1534019852) | |
| [ 3.513265] of_cfs_init | |
| [ 3.513540] of_cfs_init: OK | |
| [ 3.514219] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 | |
| [ 3.515000] cfg80211: failed to load regulatory.db | |
| [ 3.515953] vcc3v3_pcie: disabling | |
| [ 3.516325] ALSA device list: | |
| [ 3.516607] No soundcards found. | |
| [ 3.517323] ttyS2 - failed to request DMA | |
| [ 3.518441] Freeing unused kernel memory: 1408K | |
| Loading, please wait... | |
| starting version 237 | |
| [ 3.652389] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 236 | |
| [ 3.653032] mmc0: new ultra high speed SDR104 SDHC card at address aaaa | |
| [ 3.654411] mmcblk0: mmc0:aaaa SE32G 29.7 GiB | |
| [ 3.663446] mmcblk0: p1 p2 p3 p4 p5 p6 p7 | |
| [ 3.903049] iommu: Adding device ff8f0000.vop to group 0 | |
| [ 3.903642] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu | |
| [ 3.905080] iommu: Adding device ff900000.vop to group 1 | |
| [ 3.905688] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu | |
| [ 3.908633] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop | |
| [ 3.909295] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop | |
| [ 3.910136] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi | |
| [ 3.912848] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm]) | |
| [ 3.915404] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm]) | |
| [ 3.916321] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) | |
| [ 3.919379] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) | |
| [ 3.920220] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
| [ 3.920798] [drm] No driver support for vblank timestamp query. | |
| [ 3.921347] [drm] Cannot find any crtc or sizes | |
| [ 3.921989] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 | |
| Begin: Loading essential drivers ... done. | |
| Begin: Running /scripts/init-premount ... done. | |
| Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. | |
| Begin: Running /scripts/local-premount ... done. | |
| Warning: fsck not present, so skipping root file system | |
| [ 4.060866] EXT4-fs (mmcblk0p7): mounted filesystem with writeback data mode. Opts: (null) | |
| done. | |
| Begin: Running /scripts/local-bottom ... done. | |
| Begin: Running /scripts/init-bottom ... done. | |
| [ 4.367333] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) | |
| [ 4.369708] systemd[1]: Detected architecture arm64. | |
| Welcome to Ubuntu 18.04.1 LTS! | |
| [ 4.393132] systemd[1]: Set hostname to <rockpro64>. | |
| [ 4.583499] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. | |
| [ 4.585021] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) | |
| [ 4.715450] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 4.716102] systemd[1]: Reached target System Time Synchronized. | |
| [ OK ] Reached target System Time Synchronized. | |
| [ 4.726656] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 4.728084] systemd[1]: Created slice User and Session Slice. | |
| [ OK ] Created slice User and Session Slice. | |
| [ 4.738871] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 4.739529] systemd[1]: Reached target Remote File Systems. | |
| [ OK ] Reached target Remote File Systems. | |
| [ 4.750955] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| [ OK ] Started Dispatch Password Requests to Console Directory Watch. | |
| [ 4.762703] systemd[1]: Reached target Swap. | |
| [ OK ] Reached target Swap. | |
| [ OK ] Started ntp-systemd-netif.path. | |
| [ OK ] Created slice System Slice. | |
| [ OK ] Listening on udev Kernel Socket. | |
| [ OK ] Listening on Syslog Socket. | |
| [ OK ] Listening on Journal Socket (/dev/log). | |
| [ OK ] Created slice system-serial\x2dgetty.slice. | |
| [ OK ] Listening on Journal Audit Socket. | |
| [ OK ] Reached target Slices. | |
| [ OK ] Listening on Journal Socket. | |
| Starting Journal Service... | |
| Starting Nameserver information manager... | |
| Starting Restore / save the current clock... | |
| [ 4.922592] [drm] Cannot find any crtc or sizes | |
| Mounting Huge Pages File System... | |
| Mounting Kernel Debug File System... | |
| Starting Load Kernel Modules... | |
| [ OK ] Listening on /dev/initctl Compatibility Named Pipe. | |
| Starting Remount Root and Kernel File Systems... | |
| Starting Create list of required st…ce nodes for the current kernel... | |
| Mounting POSIX Message Queue File System... | |
| Starting Set the console keyboard layout... | |
| [ OK ] Started Forward Password Requests to Wall Directory Watch. | |
| [ OK ] Reached target Local Encrypted Volumes. | |
| [ OK ] Listening on udev Control Socket. | |
| Starting udev Coldplug all Devices... | |
| [ OK ] Started Journal Service. | |
| [ OK ] Started Restore / save the current clock. | |
| [ OK ] Mounted Huge Pages File System. | |
| [ OK ] Mounted Kernel Debug File System. | |
| [ OK ] Started Load Kernel Modules. | |
| [ OK ] Started Remount Root and Kernel File Systems. | |
| [ OK ] Started Create list of required sta…vice nodes for the current kernel. | |
| [ OK ] Mounted POSIX Message Queue File System. | |
| [ OK ] Started Nameserver information manager. | |
| [ OK ] Reached target Network (Pre). | |
| Starting Create Static Device Nodes in /dev... | |
| Starting Load/Save Random Seed... | |
| Mounting Kernel Configuration File System... | |
| Mounting FUSE Control File System... | |
| Starting Apply Kernel Variables... | |
| Starting Flush Journal to Persistent Storage... | |
| [ OK ] Started Set the console keyboard layout. | |
| [ OK ] Started Create Static Device Nodes in /dev. | |
| [ OK ] Started Load/Save Random Seed. | |
| [ OK ] Mounted Kernel Configuration File System. | |
| [ OK ] Started udev Coldplug all Devices. | |
| [ OK ] Mounted FUSE Control File System. | |
| [ OK ] Started Apply Kernel Variables. | |
| Starting udev Kernel Device Manager... | |
| [ OK ] Reached target Local File Systems (Pre). | |
| [ OK ] Started udev Kernel Device Manager. | |
| Starting Network Service... | |
| [ OK ] Found device /dev/ttyS2. | |
| [ 5.882029] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff880000.i2s; cannot claim for 1-0010 | |
| [ 5.883141] rockchip-pinctrl pinctrl: pin-128 (1-0010) status -22 | |
| [ 5.883741] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) from group i2s-8ch-mclk on device rockchip-pinctrl | |
| [ 5.885158] es8316 1-0010: Error applying setting, reverse things back | |
| [ OK ] Started Network Service. | |
| [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. | |
| [ OK ] Found device /dev/disk/by-label/boot. | |
| [ OK ] Started Flush Journal to Persistent Storage. | |
| Mounting /boot/efi... | |
| [ OK ] Mounted /boot/efi. | |
| [ OK ] Reached target Local File Systems. | |
| Starting Create Volatile Files and Directories... | |
| Starting Set console font and keymap... | |
| Starting Raise network interfaces... | |
| [ OK ] Started Set console font and keymap. | |
| [ OK ] Started Create Volatile Files and Directories. | |
| Starting Update UTMP about System Boot/Shutdown... | |
| Starting Network Name Resolution... | |
| Starting Network Time Synchronization... | |
| [ OK ] Started Update UTMP about System Boot/Shutdown. | |
| [ OK ] Started Raise network interfaces. | |
| [ OK ] Started Network Time Synchronization. | |
| [ OK ] Reached target System Initialization. | |
| [ OK ] Started resolvconf-pull-resolved.path. | |
| [ OK ] Reached target Paths. | |
| [ OK ] Listening on D-Bus System Message Bus Socket. | |
| [ OK ] Reached target Sockets. | |
| [ OK ] Reached target Basic System. | |
| Starting Generate SSH keys if not there... | |
| [ OK ] Started Regular background program processing daemon. | |
| Starting Rock 64 First boot... | |
| [ OK ] Started Daily Cleanup of Temporary Directories. | |
| [ OK ] Started D-Bus System Message Bus. | |
| Starting Network Manager... | |
| Starting Login Service... | |
| [ OK ] Started Set the CPU Frequency Scaling governor. | |
| Starting Resets System Activity Data Collector... | |
| Starting WPA supplicant... | |
| Starting System Logging Service... | |
| [ OK ] Started Discard unused blocks once a week. | |
| [ OK ] Started Daily apt download activities. | |
| [ OK ] Started Daily apt upgrade and clean activities. | |
| Starting Initializes zram swaping... | |
| [ OK ] Started ntp-systemd-netif.service. | |
| [ OK ] Started Message of the Day. | |
| [ OK ] Reached target Timers. | |
| Starting Dispatcher daemon for systemd-networkd... | |
| [ OK ] Started Network Name Resolution. | |
| [ OK ] Started System Logging Service. | |
| [ OK ] Started Generate SSH keys if not there. | |
| [ OK ] Started Rock 64 First boot. | |
| [ OK ] Started Resets System Activity Data Collector. | |
| [FAILED] Failed to start Initializes zram swaping. | |
| See 'systemctl status zram-config.service' for details. | |
| [ OK ] Started Login Service. | |
| [ OK ] Started WPA supplicant. | |
| Starting resolvconf-pull-resolved.service... | |
| [ OK ] Reached target Host and Network Name Lookups. | |
| [ OK ] Started resolvconf-pull-resolved.service. | |
| Starting Hostname Service... | |
| [ OK ] Started Hostname Service. | |
| [ OK ] Started Network Manager. | |
| Starting Network Manager Script Dispatcher Service... | |
| [ OK ] Reached target Network. | |
| Starting OpenBSD Secure Shell server... | |
| Starting Permit User Sessions... | |
| Starting Real time performance monitoring... | |
| [ OK ] Started Permit User Sessions. | |
| [ OK ] Started Network Manager Script Dispatcher Service. | |
| [ OK ] Started Serial Getty on ttyS2. | |
| Starting Set console scheme... | |
| [ OK ] Started Set console scheme. | |
| [ OK ] Created slice system-getty.slice. | |
| [ OK ] Started Getty on tty1. | |
| [ OK ] Reached target Login Prompts. | |
| [ OK ] Started OpenBSD Secure Shell server. | |
| Starting Authorization Manager... | |
| [ OK ] Started Authorization Manager. | |
| [ OK ] Started Real time performance monitoring. | |
| [ OK ] Started Dispatcher daemon for systemd-networkd. | |
| [ OK ] Reached target Multi-User System. | |
| [ OK ] Reached target Graphical Interface. | |
| Starting Update UTMP about System Runlevel Changes... | |
| [ OK ] Started Update UTMP about System Runlevel Changes. | |
| Ubuntu 18.04.1 LTS rockpro64 ttyS2 | |
| rockpro64 login: |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment