dmesg.log

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-26-generic (buildd@vernadsky) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Tue Dec 1 18:37:31 UTC 2009 (Ubuntu 2.6.24-26.64-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000009fff0000 (usable)
[    0.000000]  BIOS-e820: 000000009fff0000 - 000000009fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000009fff3000 - 00000000a0000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 1663MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f3b70
[    0.000000] Entering add_active_range(0, 0, 655344) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   655344
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   655344
[    0.000000] On node 0 totalpages: 655344
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 3327 pages used for memmap
[    0.000000]   HighMem zone: 422641 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F7CC0 checksum 0
[    0.000000] ACPI: RSDP 000F7CC0, 0014 (r0 ACRSYS)
[    0.000000] ACPI: RSDT 9FFF3040, 0044 (r1 ACRSYS ACRPRDCT 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 9FFF30C0, 0074 (r1 ACRSYS ACRPRDCT 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 9FFF3180, 3D3C (r1 ACRSYS AWRDACPI     1000 MSFT  3000000)
[    0.000000] ACPI: FACS 9FFF0000, 0040
[    0.000000] ACPI: HPET 9FFF7000, 0038 (r1 ACRSYS ACRPRDCT 42302E31 AWRD       98)
[    0.000000] ACPI: SLIC 9FFF7080, 0176 (r1 ACRSYS ACRPRDCT 42302E31 AWRD       20)
[    0.000000] ACPI: _WDT 9FFF7240, 0047 (r1 ACRSYS ACRPRDCT 42302E31 AWRD        0)
[    0.000000] ACPI: MCFG 9FFF7300, 003C (r1 ACRSYS ACRPRDCT 42302E31 AWRD        0)
[    0.000000] ACPI: APIC 9FFF6F00, 0084 (r1 ACRSYS ACRPRDCT 42302E31 AWRD        0)
[    0.000000] ACPI: SSDT 9FFF7380, 015C (r1  PmRef  Cpu0Ist     3000 INTL 20041203)
[    0.000000] ACPI: SSDT 9FFF7810, 02F1 (r1  PmRef    CpuPm     3000 INTL 20040311)
[    0.000000] ACPI: DMI detected: Acer
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:6 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:6 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 20, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at a4000000 (gap: a0000000:40000000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 650225
[    0.000000] Kernel command line: root=UUID=80c67075-09e0-4205-bbd9-2af151c1398c ro quiet
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 3000.303 MHz processor.
[   16.211599] Console: colour VGA+ 80x25
[   16.211608] console [tty0] enabled
[   16.213701] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   16.215454] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   16.408307] Memory: 2587232k/2621376k available (2181k kernel code, 32808k reserved, 1005k data, 368k init, 1703872k highmem)
[   16.408327] virtual kernel memory layout:
[   16.408328]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   16.408329]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   16.408330]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   16.408331]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   16.408332]       .init : 0xc0423000 - 0xc047f000   ( 368 kB)
[   16.408333]       .data : 0xc03216d6 - 0xc041cdc4   (1005 kB)
[   16.408334]       .text : 0xc0100000 - 0xc03216d6   (2181 kB)
[   16.408340] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   16.408514] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   16.408713] hpet clockevent registered
[   16.408736] Calibrating delay loop (skipped), using tsc calculated value.. 6000.60 BogoMIPS (lpj=12001212)
[   16.408824] Security Framework initialized
[   16.408845] SELinux:  Disabled at boot.
[   16.408912] AppArmor: AppArmor initialized
[   16.408924] Failure registering capabilities with primary security module.
[   16.408942] Mount-cache hash table entries: 512
[   16.409400] Initializing cgroup subsys ns
[   16.409411] Initializing cgroup subsys cpuacct
[   16.409448] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 00000000
[   16.409458] monitor/mwait feature present.
[   16.409461] using mwait in idle threads.
[   16.409474] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   16.409477] CPU: L2 cache: 2048K
[   16.409483] CPU: Physical Processor ID: 0
[   16.409484] CPU: Processor Core ID: 0
[   16.409489] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043180 0000e49d 00000000 00000001 00000000
[   16.409517] Compat vDSO mapped to ffffe000.
[   16.409561] Checking 'hlt' instruction... OK.
[   16.425551] SMP alternatives: switching to UP code
[   16.428648] Early unpacking initramfs... done
[   16.747653] ACPI: Core revision 20070126
[   16.747774] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   16.753137] CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05
[   16.753162] SMP alternatives: switching to SMP code
[   16.754087] Booting processor 1/1 eip 3000
[   16.764543] Initializing CPU#1
[   16.844297] Calibrating delay using timer specific routine.. 6000.30 BogoMIPS (lpj=12000607)
[   16.844308] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 00000000
[   16.844315] monitor/mwait feature present.
[   16.844320] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   16.844322] CPU: L2 cache: 2048K
[   16.844325] CPU: Physical Processor ID: 0
[   16.844326] CPU: Processor Core ID: 1
[   16.844328] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043180 0000e49d 00000000 00000001 00000000
[   16.844874] CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05
[   16.844907] Total of 2 processors activated (12000.90 BogoMIPS).
[   16.845008] ENABLING IO-APIC IRQs
[   16.845171] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   16.884825] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[   16.884879] ...trying to set up timer (IRQ0) through the 8259A ...  failed.
[   16.884881] ...trying to set up timer as Virtual Wire IRQ... works.
[   17.032223] checking TSC synchronization [CPU#0 -> CPU#1]:
[   17.052215] Measured 30 cycles TSC warp between CPUs, turning off TSC clock.
[   17.052218] Marking TSC unstable due to: check_tsc_sync_source failed.
[   17.052236] Brought up 2 CPUs
[   17.052272] CPU0 attaching sched-domain:
[   17.052276]  domain 0: span 03
[   17.052278]   groups: 01 02
[   17.052282] CPU1 attaching sched-domain:
[   17.052284]  domain 0: span 03
[   17.052285]   groups: 02 01
[   17.052523] net_namespace: 64 bytes
[   17.052535] Booting paravirtualized kernel on bare hardware
[   17.053141] Time:  4:23:24  Date: 01/22/10
[   17.053168] NET: Registered protocol family 16
[   17.053409] EISA bus registered
[   17.053416] ACPI: bus type pci registered
[   17.095607] PCI: PCI BIOS revision 3.00 entry at 0xfa1a0, last bus=2
[   17.095609] PCI: Using configuration type 1
[   17.095628] Setting up standard PCI resources
[   17.101393] ACPI: EC: Look up EC in DSDT
[   17.107290] ACPI: Interpreter enabled
[   17.107298] ACPI: (supports S0 S3 S4 S5)
[   17.107318] ACPI: Using IOAPIC for interrupt routing
[   17.113129] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   17.114094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   17.134041] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[   17.134161] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[   17.134280] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[   17.134399] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   17.134518] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   17.134637] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[   17.134756] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[   17.134874] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   17.135036] Linux Plug and Play Support v0.97 (c) Adam Belay
[   17.135073] pnp: PnP ACPI init
[   17.135082] ACPI: bus type pnp registered
[   17.138344] pnp: PnP ACPI: found 13 devices
[   17.138347] ACPI: ACPI bus type pnp unregistered
[   17.138351] PnPBIOS: Disabled by ACPI PNP
[   17.138627] PCI: Using ACPI for IRQ routing
[   17.138631] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   17.164016] NET: Registered protocol family 8
[   17.164019] NET: Registered protocol family 20
[   17.164068] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   17.164075] hpet0: 3 32-bit timers, 14318180 Hz
[   17.165126] AppArmor: AppArmor Filesystem Enabled
[   17.168008] Time: hpet clocksource has been installed.
[   17.168023] Switched to high resolution mode on CPU 0
[   17.168142] Switched to high resolution mode on CPU 1
[   17.176028] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[   17.176033] system 00:01: ioport range 0x800-0x805 has been reserved
[   17.176036] system 00:01: ioport range 0x290-0x297 has been reserved
[   17.176044] system 00:01: ioport range 0x880-0x88f has been reserved
[   17.176057] system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
[   17.176064] system 00:0c: iomem range 0xf0000-0xfffff could not be reserved
[   17.176067] system 00:0c: iomem range 0xfed00000-0xfed000ff could not be reserved
[   17.176069] system 00:0c: iomem range 0xfed30000-0xfed300ff could not be reserved
[   17.176072] system 00:0c: iomem range 0x9fff0000-0x9fffffff could not be reserved
[   17.176075] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
[   17.176078] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[   17.176080] system 00:0c: iomem range 0x100000-0x9ffeffff could not be reserved
[   17.176083] system 00:0c: iomem range 0xffee0000-0xffefffff could not be reserved
[   17.176086] system 00:0c: iomem range 0xfffe0000-0xfffeffff could not be reserved
[   17.176089] system 00:0c: iomem range 0xfec00000-0xfecfffff could not be reserved
[   17.176091] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
[   17.206571] PCI: Bridge: 0000:00:01.0
[   17.206576]   IO window: e000-efff
[   17.206582]   MEM window: f8000000-fbffffff
[   17.206586]   PREFETCH window: d0000000-dfffffff
[   17.206592] PCI: Bridge: 0000:00:06.0
[   17.206595]   IO window: d000-dfff
[   17.206601]   MEM window: fdd00000-fddfffff
[   17.206605]   PREFETCH window: fde00000-fdefffff
[   17.206629] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   17.206653] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   17.206665] NET: Registered protocol family 2
[   17.244000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   17.244307] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   17.244888] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   17.245197] TCP: Hash tables configured (established 131072 bind 65536)
[   17.245200] TCP reno registered
[   17.256088] checking if image is initramfs... it is
[   17.843537] Freeing initrd memory: 7323k freed
[   17.844724] audit: initializing netlink socket (disabled)
[   17.844743] audit(1264134204.276:1): initialized
[   17.845082] highmem bounce pool size: 64 pages
[   17.848239] VFS: Disk quotas dquot_6.5.1
[   17.848354] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   17.848543] io scheduler noop registered
[   17.848546] io scheduler anticipatory registered
[   17.848549] io scheduler deadline registered
[   17.848565] io scheduler cfq registered (default)
[   17.880357] Boot video device is 0000:01:00.0
[   17.880542] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   17.880595] assign_interrupt_mode Found MSI capability
[   17.880642] Allocate Port Service[0000:00:01.0:pcie00]
[   17.880780] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   17.880855] assign_interrupt_mode Found MSI capability
[   17.880902] Allocate Port Service[0000:00:06.0:pcie00]
[   17.881306] isapnp: Scanning for PnP cards...
[   18.232655] isapnp: No Plug & Play device found
[   18.277933] Real Time Clock Driver v1.12ac
[   18.278172] hpet_resources: 0xfed00000 is busy
[   18.278208] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   18.278350] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   18.278504] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   18.279355] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   18.279683] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   18.280935] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   18.281047] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   18.281282] PNP: No PS/2 controller found. Probing ports directly.
[   18.281643] serio: i8042 KBD port at 0x60,0x64 irq 1
[   18.281650] serio: i8042 AUX port at 0x60,0x64 irq 12
[   18.295993] mice: PS/2 mouse device common for all mice
[   18.296181] EISA: Probing bus 0 at eisa.0
[   18.296189] Cannot allocate resource for EISA slot 1
[   18.296201] Cannot allocate resource for EISA slot 4
[   18.296220] EISA: Detected 0 cards.
[   18.296223] cpuidle: using governor ladder
[   18.296226] cpuidle: using governor menu
[   18.296321] NET: Registered protocol family 1
[   18.296356] Using IPI No-Shortcut mode
[   18.296393] registered taskstats version 1
[   18.296478]   Magic number: 10:864:363
[   18.296522] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   18.296524] EDD information not available.
[   18.296869] Freeing unused kernel memory: 368k freed
[   18.296895] Write protecting the kernel read-only data: 803k
[   18.514308] fuse init (API version 7.9)
[   18.530270] ACPI: Fan [FAN] (on)
[   18.536237] ACPI: SSDT 9FFF7780, 0087 (r1  PmRef  Cpu1Ist     3000 INTL 20041203)
[   18.536410] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
[   18.536423] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
[   18.538011] ACPI: Thermal Zone [THRM] (41 C)
[   18.538236] ACPI: Thermal Zone [SYST] (39 C)
[   18.736285] SCSI subsystem initialized
[   18.758108] usbcore: registered new interface driver usbfs
[   18.758137] usbcore: registered new interface driver hub
[   18.762541] usbcore: registered new device driver usb
[   18.767277] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   18.767326] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 16
[   18.767343] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   18.767347] ohci_hcd 0000:00:03.0: OHCI Host Controller
[   18.767649] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[   18.767669] ohci_hcd 0000:00:03.0: irq 16, io mem 0xfdfff000
[   18.776209] libata version 3.00 loaded.
[   18.825501] usb usb1: configuration #1 chosen from 1 choice
[   18.825532] hub 1-0:1.0: USB hub found
[   18.825541] hub 1-0:1.0: 4 ports detected
[   18.918098] FDC 0 is a post-1991 82077
[   18.927377] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 17
[   18.927398] PCI: Setting latency timer of device 0000:00:03.1 to 64
[   18.927403] ohci_hcd 0000:00:03.1: OHCI Host Controller
[   18.927431] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[   18.927452] ohci_hcd 0000:00:03.1: irq 17, io mem 0xfdffe000
[   18.985388] usb usb2: configuration #1 chosen from 1 choice
[   18.985420] hub 2-0:1.0: USB hub found
[   18.985430] hub 2-0:1.0: 4 ports detected
[   19.087371] ACPI: PCI Interrupt 0000:00:03.3[C] -> GSI 22 (level, low) -> IRQ 18
[   19.087388] PCI: Setting latency timer of device 0000:00:03.3 to 64
[   19.087392] ehci_hcd 0000:00:03.3: EHCI Host Controller
[   19.087425] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
[   19.087464] PCI: cache line size of 128 is not supported by device 0000:00:03.3
[   19.087475] ehci_hcd 0000:00:03.3: irq 18, io mem 0xfdffd000
[   19.230977] usb 1-1: new low speed USB device using ohci_hcd and address 2
[   19.242972] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   19.243129] usb usb3: configuration #1 chosen from 1 choice
[   19.243159] hub 3-0:1.0: USB hub found
[   19.243167] hub 3-0:1.0: 8 ports detected
[   19.347133] pata_sis 0000:00:02.5: version 0.5.2
[   19.347183] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 19
[   19.355895] scsi0 : pata_sis
[   19.356309] scsi1 : pata_sis
[   19.356788] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
[   19.356791] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
[   19.689740] ata1.00: ATAPI: ATAPI   DVD D  DH16D1P, FA11, max UDMA/33
[   19.877563] ata1.00: configured for UDMA/33
[   19.877604] ata2: port disabled. ignoring.
[   19.878206] scsi 0:0:0:0: CD-ROM            ATAPI    DVD D  DH16D1P   FA11 PQ: 0 ANSI: 5
[   19.881149] sata_sis 0000:00:05.0: version 1.0
[   19.881180] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 20
[   19.881188] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[   19.881236] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   19.881896] scsi2 : sata_sis
[   19.882121] scsi3 : sata_sis
[   19.882564] ata3: PATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xf900 irq 20
[   19.882567] ata4: PATA max UDMA/133 cmd 0xfb00 ctl 0xfa00 bmdma 0xf908 irq 20
[   20.045499] ata3.00: ATA-7: WDC WD1600JS-22NCB1, 10.02E02, max UDMA/133
[   20.045504] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   20.054482] ata3.00: configured for UDMA/133
[   20.219244] scsi 2:0:0:0: Direct-Access     ATA      WDC WD1600JS-22N 10.0 PQ: 0 ANSI: 5
[   20.225969] usb 1-1: new low speed USB device using ohci_hcd and address 3
[   20.229488] Driver 'sr' needs updating - please use bus_type methods
[   20.232436] sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
[   20.232439] Uniform CD-ROM driver Revision: 3.20
[   20.232488] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   20.233159] Driver 'sd' needs updating - please use bus_type methods
[   20.233248] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   20.233266] sd 2:0:0:0: [sda] Write Protect is off
[   20.233269] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   20.233293] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.233359] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   20.233374] sd 2:0:0:0: [sda] Write Protect is off
[   20.233376] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   20.233400] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.233404]  sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
[   20.238035] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   20.244915]  sda1 sda2 sda3
[   20.266357] sd 2:0:0:0: [sda] Attached SCSI disk
[   20.438102] usb 1-1: configuration #1 chosen from 1 choice
[   20.744442] usb 2-1: new low speed USB device using ohci_hcd and address 2
[   20.961584] usb 2-1: configuration #1 chosen from 1 choice
[   20.964646] usbcore: registered new interface driver hiddev
[   20.970676] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1:1.0/input/input1
[   20.989255] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:03.0-1
[   20.996691] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:03.1/usb2/2-1/2-1:1.0/input/input2
[   21.013201] input,hidraw1: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:03.1-1
[   21.032468] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:03.1/usb2/2-1/2-1:1.1/input/input3
[   21.041213] input,hiddev96,hidraw2: USB HID v1.10 Device [CHICONY USB Keyboard] on usb-0000:00:03.1-1
[   21.041234] usbcore: registered new interface driver usbhid
[   21.041238] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   21.106976] Attempting manual resume
[   21.106980] swsusp: Resume From Partition 8:3
[   21.106982] PM: Checking swsusp image.
[   21.107117] PM: Resume from disk failed.
[   21.154708] kjournald starting.  Commit interval 5 seconds
[   21.154717] EXT3-fs: mounted filesystem with ordered data mode.
[   27.348323] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   27.612452] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   27.633371] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   27.774558] ACPI: WMI-Acer: Mapper loaded
[   27.801555] parport_pc 00:0a: reported by Plug and Play ACPI
[   27.801601] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   28.026393] input: Power Button (FF) as /devices/virtual/input/input5
[   28.078165] ACPI: Power Button (FF) [PWRF]
[   28.078244] input: Power Button (CM) as /devices/virtual/input/input6
[   28.078417] sis190 Gigabit Ethernet driver 1.2 loaded.
[   28.078454] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 21
[   28.078472] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   28.078485] 0000:00:04.0: Read MAC address from EEPROM
[   28.078487] 0000:00:04.0: Error EEPROM read 0.
[   28.078490] 0000:00:04.0: Read MAC address from APC.
[   28.126076] 0000:00:04.0: Unknown PHY transceiver at address 1.
[   28.142457] ACPI: Power Button (CM) [PWRB]
[   28.164603] acer_acpi: Acer Laptop ACPI Extras version 0.11.1
[   28.164620] acer_acpi: No or unsupported WMI interface, unable to load.
[   28.384523] Linux agpgart interface v0.102
[   28.540422] nvidia: module license 'NVIDIA' taints kernel.
[   28.637552] 0000:00:04.0: Using transceiver at address 1 as default.
[   28.669837] 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8984000 (IRQ: 21), 00:15:58:bb:41:56
[   28.669842] eth0: RGMII mode.
[   28.669848] eth0: Enabling Auto-negotiation.
[   28.843604] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
[   28.843619] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   28.878681] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
[   29.024918] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 22
[   29.024944] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[   29.050979] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   29.745092] loop: module loaded
[   29.769034] lp0: using parport0 (interrupt-driven).
[   29.801275] it87: Found IT8718F chip at 0x290, revision 2
[   29.801284] it87: in3 is VCC (+5V)
[   29.801286] it87: in7 is VCCH (+5V Stand-By)
[   29.913727] Adding 2963984k swap on /dev/sda3.  Priority:-1 extents:1 across:2963984k
[   30.178632] EXT3 FS on sda1, internal journal
[   30.672489] kjournald starting.  Commit interval 5 seconds
[   30.672764] EXT3 FS on sda2, internal journal
[   30.672774] EXT3-fs: mounted filesystem with ordered data mode.
[   31.261926] ip_tables: (C) 2000-2006 Netfilter Core Team
[   32.583353] RPC: Registered udp transport module.
[   32.583357] RPC: Registered tcp transport module.
[   33.712961] No dock devices found.
[   34.874058] NET: Registered protocol family 10
[   34.874371] lo: Disabled Privacy Extensions
[   35.144122] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   35.144130] apm: disabled - APM is not SMP safe.
[   35.357465] ppdev: user-space parallel port driver
[   35.555126] audit(1264134222.909:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5235 profile="/usr/sbin/cupsd" namespace="default"
[   36.309222] QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
[   36.309607] KQEMU installed, max_locked_mem=1297936kB.
[   36.449257] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   36.654337] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   36.663517] NFSD: starting 90-second grace period
[   37.584466] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   37.584474] vboxdrv: Successfully done.
[   37.584477] vboxdrv: Found 2 processor cores.
[   37.585056] vboxdrv: fAsync=0 offMin=0x7e9 offMax=0x20a3
[   37.585288] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   37.585293] vboxdrv: Successfully loaded version 3.1.2 (interface 0x00100001).
[   38.611842] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   38.716883] Bluetooth: Core ver 2.11
[   38.717290] NET: Registered protocol family 31
[   38.717295] Bluetooth: HCI device and connection manager initialized
[   38.717301] Bluetooth: HCI socket layer initialized
[   38.734235] Bluetooth: L2CAP ver 2.9
[   38.734241] Bluetooth: L2CAP socket layer initialized
[   38.742036] Bluetooth: RFCOMM socket layer initialized
[   38.742051] Bluetooth: RFCOMM TTY layer initialized
[   38.742054] Bluetooth: RFCOMM ver 1.8
[   48.628579] eth0: mii ext = 0000.
[   48.644564] eth0: mii lpa = 45e1 adv = 01e1.
[   48.644571] eth0: link on 100 Mbps Full Duplex mode.
[   48.647499] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   48.985227] eth0: mii ext = 0000.
[   49.001207] eth0: mii lpa = 45e1 adv = 01e1.
[   49.001214] eth0: link on 100 Mbps Full Duplex mode.
[   50.877712] NET: Registered protocol family 17
[   64.720953] eth0: no IPv6 routers present
[  236.512221] crashreporter[6604]: segfault at b71a7400 eip b71a7400 esp bf97adcc error 4
[  260.828983] crashreporter[6659]: segfault at b7162400 eip b7162400 esp bff3f04c error 4
[  308.691950] crashreporter[6685]: segfault at b711d400 eip b711d400 esp bfb782ec error 4
[  311.456863] gnome-terminal[6607]: segfault at b47633e5 eip b47633e5 esp bf911c7c error 4
[  431.503161] crashreporter[6719]: segfault at b71cd400 eip b71cd400 esp bff0491c error 4
[  435.282460] crashreporter[6736]: segfault at b71ad400 eip b71ad400 esp bfdb2a7c error 4
[  682.727306] crashreporter[6795]: segfault at b716b400 eip b716b400 esp bf91b44c error 4
[  685.837681] crashreporter[6812]: segfault at b718a400 eip b718a400 esp bfecda5c error 4
[  884.154854] crashreporter[6867]: segfault at b713a400 eip b713a400 esp bfeb3e9c error 4
[  885.516567] crashreporter[6884]: segfault at b71bb400 eip b71bb400 esp bfeb19cc error 4
[ 2113.809293] crashreporter[7332]: segfault at b71c1400 eip b71c1400 esp bf9a1c7c error 4
[ 2935.851891] crashreporter[7440]: segfault at b7142400 eip b7142400 esp bf9cb28c error 4
[ 9847.803257] gnome-terminal[7018]: segfault at b46c13e5 eip b46c13e5 esp bfd46b3c error 4
[13375.971354] aufs 20080128