devstack config for octavia

config.sh

#!/bin/bash -eux

sudo apt install -y git build-essential python3-dev curl

git clone https://opendev.org/openstack/devstack

cd devstack

wget https://gist.github.com/freyes/966393e381316e66b00acc0282ed43db/raw/18b8ae546ca8f82cb7648e52d1388016aa333db1/local.conf

./stack.sh

local.conf

# Sample ``local.conf`` for user-configurable variables in ``stack.sh``

# NOTE: Copy this file to the root DevStack directory for it to work properly.

# ``local.conf`` is a user-maintained settings file that is sourced from ``stackrc``.
# This gives it the ability to override any variables set in ``stackrc``.
# Also, most of the settings in ``stack.sh`` are written to only be set if no
# value has already been set; this lets ``local.conf`` effectively override the
# default values.

# This is a collection of some of the settings we have found to be useful
# in our DevStack development environments. Additional settings are described
# in https://docs.openstack.org/devstack/latest/configuration.html#local-conf
# These should be considered as samples and are unsupported DevStack code.

# The ``localrc`` section replaces the old ``localrc`` configuration file.
# Note that if ``localrc`` is present it will be used in favor of this section.
[[local|localrc]]

# Minimal Contents
# ----------------

# While ``stack.sh`` is happy to run without ``localrc``, devlife is better when
# there are a few minimal variables set:

# If the ``*_PASSWORD`` variables are not set here you will be prompted to enter
# values for them by ``stack.sh``and they will be added to ``local.conf``.
ADMIN_PASSWORD=ubuntu
DATABASE_PASSWORD=$ADMIN_PASSWORD
RABBIT_PASSWORD=$ADMIN_PASSWORD
SERVICE_PASSWORD=$ADMIN_PASSWORD


enable_plugin octavia https://opendev.org/openstack/octavia
enable_plugin octavia-tempest-plugin https://opendev.org/openstack/octavia-tempest-plugin
enable_plugin neutron https://opendev.org/openstack/neutron
enable_plugin neutron-tempest-plugin https://opendev.org/openstack/neutron-tempest-plugin

PUBLIC_INTERFACE=enp6s0

Q_AGENT=ovn
Q_ML2_PLUGIN_MECHANISM_DRIVERS=ovn,logger
Q_ML2_PLUGIN_TYPE_DRIVERS=local,flat,vlan,geneve
Q_ML2_TENANT_NETWORK_TYPE="geneve"

# Enable Logging
LOGFILE=$DEST/logs/stack.sh.log
VERBOSE=True
LOG_COLOR=True
# Pre-requisite
ENABLED_SERVICES=rabbit,mysql,key
# Nova
ENABLED_SERVICES+=,n-api,n-crt,n-cpu,n-cond,n-sch,n-api-meta,n-sproxy
ENABLED_SERVICES+=,placement-api,placement-client
# Glance
ENABLED_SERVICES+=,g-api
# Neutron + ovn
# OVN
ENABLED_SERVICES+=,ovn-northd,ovn-controller,q-ovn-metadata-agent
ENABLED_SERVICES+=,q-trunk,q-dns,q-port-forwarding,q-qos,neutron-segments
ENABLED_SERVICES+=,q-svc,neutron
ENABLED_SERVICES+=,octavia,o-cw,o-hk,o-hm,o-api
# Cinder
ENABLED_SERVICES+=,c-api,c-vol,c-sch
# Tempest
ENABLED_SERVICES+=,tempest

# ``HOST_IP`` and ``HOST_IPV6`` should be set manually for best results if
# the NIC configuration of the host is unusual, i.e. ``eth1`` has the default
# route but ``eth0`` is the public interface.  They are auto-detected in
# ``stack.sh`` but often is indeterminate on later runs due to the IP moving
# from an Ethernet interface to a bridge on the host. Setting it here also
# makes it available for ``openrc`` to include when setting ``OS_AUTH_URL``.
# Neither is set by default.
#HOST_IP=w.x.y.z
#HOST_IPV6=2001:db8::7


# Logging
# -------

# By default ``stack.sh`` output only goes to the terminal where it runs.  It can
# be configured to additionally log to a file by setting ``LOGFILE`` to the full
# path of the destination log file.  A timestamp will be appended to the given name.
LOGFILE=$DEST/logs/stack.sh.log

# Old log files are automatically removed after 7 days to keep things neat.  Change
# the number of days by setting ``LOGDAYS``.
LOGDAYS=2

# Nova logs will be colorized if ``SYSLOG`` is not set; turn this off by setting
# ``LOG_COLOR`` false.
#LOG_COLOR=False


# Using milestone-proposed branches
# ---------------------------------

# Uncomment these to grab the milestone-proposed branches from the
# repos:
#CINDER_BRANCH=milestone-proposed
#GLANCE_BRANCH=milestone-proposed
#HORIZON_BRANCH=milestone-proposed
#KEYSTONE_BRANCH=milestone-proposed
#KEYSTONECLIENT_BRANCH=milestone-proposed
#NOVA_BRANCH=milestone-proposed
#NOVACLIENT_BRANCH=milestone-proposed
#NEUTRON_BRANCH=milestone-proposed
#SWIFT_BRANCH=milestone-proposed

# Using git versions of clients
# -----------------------------
# By default clients are installed from pip.  See LIBS_FROM_GIT in
# stackrc for details on getting clients from specific branches or
# revisions.  e.g.
# LIBS_FROM_GIT="python-ironicclient"
# IRONICCLIENT_BRANCH=refs/changes/44/2.../1

# Swift
# -----

# Swift is now used as the back-end for the S3-like object store. Setting the
# hash value is required and you will be prompted for it if Swift is enabled
# so just set it to something already:
SWIFT_HASH=66a3d6b56c1f479c8b4e70ab5c2000f5

# For development purposes the default of 3 replicas is usually not required.
# Set this to 1 to save some resources:
SWIFT_REPLICAS=1

# The data for Swift is stored by default in (``$DEST/data/swift``),
# or (``$DATA_DIR/swift``) if ``DATA_DIR`` has been set, and can be
# moved by setting ``SWIFT_DATA_DIR``. The directory will be created
# if it does not exist.
SWIFT_DATA_DIR=$DEST/data