gistfile1.txt

U-Boot 2021.04 (Jun 23 2021 - 20:04:26 +0000)

DRAM:  7.9 GiB
RPI 4 Model B (0xd03114)
MMC:   mmcnr@7e300000: 1, emmc2@7e340000: 0
Loading Environment from FAT... Card did not respond to voltage select! : -110
In:    serial
Out:   vidconsole
Err:   vidconsole
Net:   eth0: ethernet@7d580000
PCIe BRCM: link up, 5.0 Gbps x1 (SSC)
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 3 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
Hit any key to stop autoboot:  0 
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110

Device 0: Vendor: ORICO    Rev: 0209 Prod: TCM2-C3         
            Type: Hard Disk
            Capacity: 238475.1 MB = 232.8 GB (488397168 x 512)
... is now current device
** Invalid partition 1 **
BOOTP broadcast 1
DHCP client bound to address 192.168.15.200 (3 ms)
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'ipxe-arm64.efi'.
Load address: 0x200000
Loading: ##################################################  968.6 KiB
	 887.7 KiB/s
done
Bytes transferred = 991872 (f2280 hex)
missing environment variable: pxeuuid
Retrieving file: pxelinux.cfg/01-dc-a6-32-ae-9e-59
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'pxelinux.cfg/01-dc-a6-32-ae-9e-59'.
Load address: 0x2500000
Loading: *
TFTP error: 'open /var/lib/sidero/tftp/pxelinux.cfg/01-dc-a6-32-ae-9e-59: no such file or directory' (1)
Not retrying...
Retrieving file: pxelinux.cfg/C0A80FC8
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'pxelinux.cfg/C0A80FC8'.
Load address: 0x2500000
Loading: *
TFTP error: 'open /var/lib/sidero/tftp/pxelinux.cfg/C0A80FC8: no such file or directory' (1)
Not retrying...
Retrieving file: pxelinux.cfg/C0A80FC
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'pxelinux.cfg/C0A80FC'.
Load address: 0x2500000
Loading: *
TFTP error: 'open /var/lib/sidero/tftp/pxelinux.cfg/C0A80FC: no such file or directory' (1)
Not retrying...
Retrieving file: pxelinux.cfg/C0A80F
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'pxelinux.cfg/C0A80F'.
Load address: 0x2500000
Loading: *
TFTP error: 'open /var/lib/sidero/tftp/pxelinux.cfg/C0A80F: no such file or directory' (1)
Not retrying...
Retrieving file: pxelinux.cfg/C0A80
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'pxelinux.cfg/C0A80'.
Load address: 0x2500000
Loading: *
TFTP error: 'open /var/lib/sidero/tftp/pxelinux.cfg/C0A80: no such file or directory' (1)
Not retrying...
Retrieving file: pxelinux.cfg/C0A8
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'pxelinux.cfg/C0A8'.
Load address: 0x2500000
Loading: *
TFTP error: 'open /var/lib/sidero/tftp/pxelinux.cfg/C0A8: no such file or directory' (1)
Not retrying...
Retrieving file: pxelinux.cfg/C0A
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'pxelinux.cfg/C0A'.
Load address: 0x2500000
Loading: *
TFTP error: 'open /var/lib/sidero/tftp/pxelinux.cfg/C0A: no such file or directory' (1)
Not retrying...
Retrieving file: pxelinux.cfg/C0
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'pxelinux.cfg/C0'.
Load address: 0x2500000
Loading: *
TFTP error: 'open /var/lib/sidero/tftp/pxelinux.cfg/C0: no such file or directory' (1)
Not retrying...
Retrieving file: pxelinux.cfg/C
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'pxelinux.cfg/C'.
Load address: 0x2500000
Loading: *
TFTP error: 'open /var/lib/sidero/tftp/pxelinux.cfg/C: no such file or directory' (1)
Not retrying...
Retrieving file: pxelinux.cfg/default-arm-bcm283x-rpi
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'pxelinux.cfg/default-arm-bcm283x-rpi'.
Load address: 0x2500000
Loading: *
TFTP error: 'open /var/lib/sidero/tftp/pxelinux.cfg/default-arm-bcm283x-rpi: no such file or directory' (1)
Not retrying...
Retrieving file: pxelinux.cfg/default-arm-bcm283x
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'pxelinux.cfg/default-arm-bcm283x'.
Load address: 0x2500000
Loading: *
TFTP error: 'open /var/lib/sidero/tftp/pxelinux.cfg/default-arm-bcm283x: no such file or directory' (1)
Not retrying...
Retrieving file: pxelinux.cfg/default-arm
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'pxelinux.cfg/default-arm'.
Load address: 0x2500000
Loading: *
TFTP error: 'open /var/lib/sidero/tftp/pxelinux.cfg/default-arm: no such file or directory' (1)
Not retrying...
Retrieving file: pxelinux.cfg/default
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'pxelinux.cfg/default'.
Load address: 0x2500000
Loading: *
TFTP error: 'open /var/lib/sidero/tftp/pxelinux.cfg/default: no such file or directory' (1)
Not retrying...
Config file not found
BOOTP broadcast 1
DHCP client bound to address 192.168.15.200 (4 ms)
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'boot.scr.uimg'.
Load address: 0x2400000
Loading: *
TFTP error: 'open /var/lib/sidero/tftp/boot.scr.uimg: no such file or directory' (1)
Not retrying...
BOOTP broadcast 1
DHCP client bound to address 192.168.15.200 (3 ms)
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'ipxe-arm64.efi'.
Load address: 0x80000
Loading: ##################################################  968.6 KiB
	 804.7 KiB/s
done
Bytes transferred = 991872 (f2280 hex)
Using ethernet@7d580000 device
TFTP from server 192.168.15.159; our IP address is 192.168.15.200
Filename 'dtb/broadcom/bcm2711-rpi-4-b.dtb'.
Load address: 0x2600000
Loading: *
TFTP error: 'open /var/lib/sidero/tftp/dtb/broadcom/bcm2711-rpi-4-b.dtb: no such file or directory' (1)
Not retrying...
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Card did not respond to voltage select! : -110
Scanning disk mmcnr@7e300000.blk...
Disk mmcnr@7e300000.blk not ready
Card did not respond to voltage select! : -110
Scanning disk emmc2@7e340000.blk...
Disk emmc2@7e340000.blk not ready
Scanning disk usb_mass_storage.lun0...
Found 1 disks
No EFI system partition
Booting /ipxe-arm64.efi
Not a PE-COFF file
iPXE initialising devices...ok



iPXE 1.0.0+ -- Open Source Network Boot Firmware -- http://ipxe.org
Features: DNS HTTP HTTPS iSCSI TFTP SRP AoE EFI Menu
Configuring (net0 dc:a6:32:ae:9e:59)....... ok
http://192.168.15.159:8081/ipxe... ok
Not a PE-COFF file
/env/agent-arm64/vmlinuz... ok
/env/agent-arm64/initramfs.xz... ok
Not a PE-COFF file
EFI stub: Booting Linux Kernel...
EFI stub: Using DTB from configuration table
EFI stub: Loaded initrd from command line option
EFI stub: Exiting boot services and installing virtual address map...