Navigation Menu

Skip to content

Instantly share code, notes, and snippets.

@fujin

fujin/start-gcode.txt

Created January 10, 2019 22:51
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save fujin/45866878c8dbd0eb179eac9ac7f6d695 to your computer and use it in GitHub Desktop.
Save fujin/45866878c8dbd0eb179eac9ac7f6d695 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
start-gcode.txt
M220 S100 ; Feed rate (speed) 100%
M221 S100 ; Flow (extrusion modifier) 100%
M83 ; extruder relative mode
M140 S[first_layer_bed_temperature] ; set bed temp
M109 S160 ; Set extruder temp before bed level
M190 S[first_layer_bed_temperature] ; wait for bed temp
; Klipper PINDA Probe warming sequence
G28 W
G0 X50 Y50 Z0.15
{if first_layer_bed_temperature[0] >= 50 }PROBE_WAIT TEMP=40 DIRECTION=heat{endif}
; MBL
G80
; Absolute coordinates
G90
M109 S[first_layer_temperature] ; wait for extruder temp
G1 Y-3.0 F1000.0 ; go outside print area
G92 E0.0
G1 E8 ; Purge Bubble
G1 X60.0 E9.0 F1000.0 ; intro line
G1 X100.0 E12.5 F1000.0 ; intro line
G92 E0.0
; Klipper PA
SET_PRESSURE_ADVANCE ADVANCE=0.120
SET_PRESSURE_ADVANCE ADVANCE_LOOKAHEAD_TIME=0.010
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment