- Blackout MiniH + Fearless Super 6" upgrade
- US$149.99
- Naze32 Acro/Pro Flight Controller
- US$24.99
- (Alternative) BrainFPV Flight Controller integrated OSD
- US$129
- 4x Cobra CM2208/20 2000kv Motors
- US$25.99 EA
- US$103.96
- 4x KISS 18A v1.1 ESC
- US$25.99 EA
- US$103.96 also available from flyduino.net ex-Germany. Very rare. Supports OneShot125
- (Alternative) BLHeli 12A quadpack
- USD$56.00
- (Alternative) 4x ZTW 20a ESC
- US$17.99 EA
- US$71.96
- 100 6045 HQProp Propellers (months of crashes)
- TBS Core Pro (OSD, if using BrainFPV, do not purchase)
- If using BrainFPV, purchase 12V SU/SD regulator+filter for camera, 5V BEC for BrainFPV, or something like this
- Sony Super HAD 600TVL 2.8mm w/o hard-case
- US$29.99
- Sony 960H CCD Effio-V 800TVL Ultra WDR Camera 2.8mm Lens OSD (12V)
- US$46.11 EA
- Mobius HD + 2.1mm Wide Angle Lens
- US$72.99
- (Alternative) GoPro HeroHD4BE+
- 600mW 5.8Ghz Video Transmitter
- US$69.99
- IMRM/TBS Fatshark Dominator 5.8Ghz Receiver module
- US$42.99
- Fatshark Dominator Video Goggles
- US$299.90 ($300+ea)
- Fatshark CP Antennas to suit (Transmitter/Receiver)
- US$39.99
- 32-128GiB MicroSD
- Lumenier 1800mAh 35-70C 4S
- US$24.99 EA
- US$100 (x4)
- B6AC charger
- US$36.99
- Parallel XT60 charge board
- US$17.99
- turnigy USBLinker for RapidFlash ESC flashing
- $9.99
- rap straps
- US$1.74 EA
- heat gun
- assorted heat shrink tubing, 5mm -- 30mm in 5mm increments.
- bag of genuine XT60 connectors
- assorted 8-22AWG red/black
- xacto knife set
- Hakko FX-888D Soldering Station (adjustable temperature control)
- solder (high purity%)
- flux
- socket set (4mm, 5mm, 5.5mm, 6mm, ratchet, driver, extensions)
- driver set (incl. hex tips, M1-6)
- toolbox / shelving to hold all of this junk
Do not buy this unless you can dig the deep end.