Skip to content

Instantly share code, notes, and snippets.

What would you like to do?
Edison boot
WR: 20104000
SCU IPC: 0x800000d0 0xfffce92c
PSH miaHOB version: TNG.B0.VVBD.0000000c
microkernel built 23:15:13 Apr 24 2014
******* PSH loader *******
PCM page cache size = 192 KB
Cache Constraint = 0 Pages
Arming IPC driver ..
Adding page store pool ..
PagestoreAddr(IMR Start Address) = 0x04899000
pageStoreSize(IMR Size) = 0x00080000
*** Ready to receive application ***
U-Boot 2014.04 (Aug 20 2014 - 16:08:32)
Watchdog enabled
DRAM: 980.6 MiB
MMC: tangier_sdhci: 0
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
Partitioning already done...
Flashing already done...
GADGET DRIVER: usb_dnl_dfu
reading vmlinuz
5124192 bytes read in 127 ms (38.5 MiB/s)
Valid Boot Flag
Setup Size = 0x00003c00
Magic signature found
Using boot protocol version 2.0c
Linux kernel version 3.10.17-poky-edison+ (sys_dswci@ncsndgbuild04) #1 SMP PREEMPT Wed Aug 20 16:09:18 CEST 2014
Building boot_params at 0x00090000
Loading bzImage at address 00100000 (5108832 bytes)
Magic signature found
Kernel command line: "root=PARTUUID=012b3303-34ac-284d-99b4-34e03a2335f4 rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 hardware_id=00 g_multi.iSerialNumber=2c265be5f943fb9d07a827863a873fab"
Starting kernel ...
[ 0.769051] pca953x 1-0020: failed reading register
[ 0.769460] pca953x 1-0021: failed reading register
[ 0.779347] pca953x 1-0022: failed reading register
[ 0.779740] pca953x 1-0023: failed reading register
[ 1.647883] pmic_ccsm pmic_ccsm: Error reading battery profile from battid frmwrk
[ 1.656698] pmic_ccsm pmic_ccsm: Battery Over heat exception
Welcome to Linux!
[ OK ] Reached target Remote File Systems.
Expecting device dev-ttyMFD2.device...
Expecting device dev-mmcblk1p1.device...
[ OK ] Reached target Paths.
[ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[ OK ] Reached target Swap.
[ OK ] Set up automount boot.automount.
[ OK ] Set up automount home.automount.
[ OK ] Created slice Root Slice.
[ OK ] Listening on Delayed Shutdown Socket.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on Syslog Socket.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on udev Control Socket.
[ OK ] Created slice User and Session Slice.
[ OK ] Listening on Journal Socket.
[ OK ] Created slice System Slice.
Starting Remount Root and Kernel File Systems...
Starting Load Kernel Modules...
Starting udev Coldplug all Devices...
Starting Create list of required static device nodes...rrent kernel...
Mounting Debug File System...
Starting Apply Kernel Variables...
Mounting POSIX Message Queue File System...
[ OK ] Created slice system-getty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
Starting Journal Service...
[ OK ] Started Journal Service.
[ OK ] Reached target Slices.
Mounting Temporary Directory...
[ OK ] Set up automount factory.automount.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Debug File System.
[ OK ] Mounted Temporary Directory.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Create list of required static device nodes ...current kernel.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Load Kernel Modules.
[ OK ] Started udev Coldplug all Devices.
Mounting FUSE Control File System...
Mounting Configuration File System...
Starting Create Static Device Nodes in /dev...
Starting Load/Save Random Seed...
[ OK ] Mounted Configuration File System.
[ OK ] Mounted FUSE Control File System.
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Started Load/Save Random Seed.
Starting udev Kernel Device Manager...
[ OK ] Reached target Local File Systems (Pre).
Mounting /var/volatile...
[ OK ] Mounted /var/volatile.
[ OK ] Started udev Kernel Device Manager.
[ OK ] Reached target Local File Systems.
Starting Trigger Flushing of Journal to Persistent Storage...
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
[ OK ] Created slice system-systemd\x2drfkill.slice.
Starting Load/Save RF Kill Switch Status of rfkill2...
Starting Load/Save RF Kill Switch Status of rfkill1...
Starting Load/Save RF Kill Switch Status of rfkill0...
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Load/Save RF Kill Switch Status of rfkill2.
[ OK ] Started Load/Save RF Kill Switch Status of rfkill1.
[ OK ] Started Load/Save RF Kill Switch Status of rfkill0.
[ OK ] Started Network Time Synchronization.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Found device /dev/ttyMFD2.
[ OK ] Reached target System Initialization.
[ OK ] Reached target Timers.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on sshd.socket.
[ OK ] Reached target Sound Card.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Watchdog sample daemon...
[ OK ] Started Watchdog sample daemon.
Starting USB Ethernet gadget...
[ 7.396218] dwc3-device dwc3-device.1: dwc3-gadget is already bound to g_multi
Starting Crashlog service...
[ OK ] Started Crashlog service.
Starting Edison RM button handler...
[ OK ] Started Edison RM button handler.
Starting Kernel Logging Service...
[ OK ] Started Kernel Logging Service.
Starting Bluetooth rf kill event daemon...
[ OK ] Started Bluetooth rf kill event daemon.
Starting Daemon to handle arduino sketches...
[ OK ] Started Daemon to handle arduino sketches.
Starting Daemon to reset sketches...
[ OK ] Started Daemon to reset sketches.
Starting System Logging Service...
[ OK ] Started System Logging Service.
Starting Login Service...
Starting Permit User Sessions...
Starting D-Bus System Message Bus...
[ OK ] Started D-Bus System Message Bus.
Starting Network Service...
[ OK ] Started Permit User Sessions.
[ OK ] Started Network Service.
[ OK ] Started USB Ethernet gadget.
[ OK ] Created slice system-systemd\x2dfsck.slice.
Starting File System Check on /dev/disk/by-partlabel/factory...
[ OK ] Reached target Network.
Starting Mosquitto - lightweight server implementati...SN protocols...
[ OK ] Started Mosquitto - lightweight server implementatio...T-SN protocols.
Starting Zero-configuration networking...
[ OK ] Started Zero-configuration networking.
Starting Intel_XDK_Daemon...
[ OK ] Started Intel_XDK_Daemon.
Starting Network Name Resolution...
Starting Getty on tty1...
[ OK ] Started Getty on tty1.
Starting Serial Getty on ttyMFD2...
[ OK ] Started Serial Getty on ttyMFD2.
[ OK ] Reached target Login Prompts.
Starting HSU runtime pm service...
[ OK ] Started Network Name Resolution.
[ OK ] Started File System Check on /dev/disk/by-partlabel/factory.
[ OK ] Started HSU runtime pm service.
[ OK ] Started Login Service.
[ 9.400997] systemd-fsck[204]: /dev/mmcblk0p5: Superblock last mount time is in the future.
Mounting /factory...
[ 9.451492] systemd-fsck[204]: (by less than a day, probably due to the hardware clock being incorrectly set) FIXED.
[ 9.537064] systemd-fsck[204]: /dev/mmcblk0p5: clean, 13/128 files, 40/1024 blocks
[ OK ] Mounted /factory.
Poky (Yocto Project Reference Distro) 1.6 edison ttyMFD2
edison login:
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.