|
#!/usr/bin/env bash |
|
|
|
## Build 20211009-001 |
|
|
|
## 导入通用变量与函数 |
|
dir_shell=/ql/shell |
|
. $dir_shell/share.sh |
|
|
|
## 预设的仓库及默认调用仓库设置 |
|
## 将"repo=$repo1"改成repo=$repo2"或其他，以默认调用其他仓库脚本日志 |
|
## 也可自行搜索本脚本内的"name_js=("和"name_js_only",将"repo"改成"repo2"或其他，用以自由组合调用仓库的脚本日志 |
|
repo1='panghu999_jd_scripts' #预设的 panghu999 仓库 |
|
repo2='JDHelloWorld_jd_scripts' #预设的 JDHelloWorld 仓库 |
|
repo3='he1pu_JDHelp' #预设的 he1pu 仓库 |
|
repo4='shufflewzc_faker2' #预设的 shufflewzc 仓库 |
|
repo5='Wenmoux_scripts_wen_chinnkarahoi' #预设的 Wenmoux 仓库，用于读取口袋书店互助码。需提前拉取温某人的仓库或口袋书店脚本并完整运行。 |
|
repo6='Aaron-lv_sync_jd_scripts' #预设的 Aaron-lv 仓库 |
|
repo7='smiek2221_scripts' #预设的 smiek2221 仓库 |
|
repo=$repo4 #默认调用 shufflewzc_faker2 仓库脚本日志 |
|
|
|
## 调试模式开关，默认是0，表示关闭；设置为1，表示开启 |
|
DEBUG="1" |
|
|
|
## 本脚本限制的最大线程数量 |
|
proc_num="8" |
|
|
|
## 备份配置文件开关，默认是1，表示开启；设置为0，表示关闭。备份路径 /ql/config/bak/ |
|
BACKUP="1" |
|
## 是否删除指定天数以前的备份文件开关，默认是1，表示开启；设置为0，表示关闭。删除路径 /ql/config/bak/ |
|
CLEANBAK="1" |
|
## 定义删除指定天数以前的备份文件 |
|
CLEANBAK_DAYS="2" |
|
|
|
## 定义 jcode 脚本导出的互助码模板样式（选填） |
|
## 不填 使用“按编号顺序互助模板”，Cookie编号在前的优先助力 |
|
## 填 0 使用“全部一致互助模板”，所有账户要助力的码全部一致 |
|
## 填 1 使用“均等机会互助模板”，所有账户获得助力次数一致 |
|
## 填 2 使用“随机顺序互助模板”，本套脚本内账号间随机顺序助力，每次生成的顺序都不一致。 |
|
HelpType="" |
|
|
|
## 定义指定活动采用指定的互助模板。 |
|
## 设定值为 DiyHelpType="1" 表示启用功能；不填或填其他内容表示不开启功能。 |
|
## 如果只是想要控制某个活动以执行某种互助规则，可以参考下面 case 这个命令的例子来控制 |
|
## 活动名称参见 name_config 定义内容；具体可在本脚本中搜索 name_config=( 获悉 |
|
DiyHelpType="0" |
|
diy_help_rules(){ |
|
case $1 in |
|
Fruit) |
|
tmp_helptype="0" # 东东农场使用“全部一致互助模板”，所有账户要助力的码全部一致 |
|
;; |
|
DreamFactory | JdFactory) |
|
tmp_helptype="1" # 京喜工厂和东东工厂使用“均等机会互助模板”，所有账户获得助力次数一致 |
|
;; |
|
Jdzz | Joy) |
|
tmp_helptype="2" # 京东赚赚和疯狂的Joy使用“随机顺序互助模板”，本套脚本内账号间随机顺序助力，每次生成的顺序都不一致。 |
|
;; |
|
*) |
|
tmp_helptype=$HelpType # 其他活动仍按默认互助模板生产互助规则。 |
|
;; |
|
esac |
|
} |
|
|
|
## 定义屏蔽模式。被屏蔽的账号将不被助力，被屏蔽的账号仍然可以助力其他账号。 |
|
## 设定值为 BreakHelpType="1" 表示启用屏蔽模式；不填或填其他内容表示不开启功能。 |
|
## 自定义屏蔽账号序号或序号区间。当 BreakHelpType="1"时生效。 |
|
## 设定值为一个或多个不相同正整数，每个正整数不大于账号总数；也可以设置正整数区间，最大正整数不大于账号总数； |
|
## 如：a) 设定为 BreakHelpNum="3" 表示第 3 个账号不被助力； |
|
## b) 设定为 BreakHelpNum="5 7 8 10" 表示第 5 7 8 10 个账号均不被助力； |
|
## c) 设定为 BreakHelpNum="6-12" 表示从第 6 至 12 个账号均不被助力； |
|
## d) 设定为 BreakHelpNum="4 9-14 15~18 19_21" 表示第4个账号、第9至14账号、第15至18账号、第19至21账号均不被助力。注意序号区间连接符仅支持 - ~ _； |
|
## 不按示例填写可能引发报错。 |
|
BreakHelpType="0" ## 屏蔽模式 |
|
BreakHelpNum="4 9-14 15~18 19_21" ## 屏蔽账号序号或序号区间 |
|
|
|
## 定义是否自动更新配置文件中的互助码和互助规则 |
|
## 默认为 UpdateType="1" 表示更新互助码和互助规则；UpdateType="2" 表示只更新互助码，不更新互助规则；UpdateType="3" 表示只更新互助规则，不更新互助码；留空或其他数值表示不更新。 |
|
UpdateType="1" |
|
|
|
## 定义是否自动安装或修复缺失的依赖，默认为1，表示自动修复；留空或其他数值表示不修复。 |
|
FixDependType="1" |
|
## 定义监控修复的依赖名称 |
|
package_name="canvas png-js date-fns axios crypto-js ts-md5 tslib @types/node dotenv typescript fs require tslib jsdom" |
|
|
|
## 需组合的环境变量列表，env_name需要和var_name一一对应，如何有新活动按照格式添加(不懂勿动) |
|
env_name=( |
|
FRUITSHARECODES |
|
PETSHARECODES |
|
PLANT_BEAN_SHARECODES |
|
DREAM_FACTORY_SHARE_CODES |
|
DDFACTORY_SHARECODES |
|
JDJOY_SHARECODES |
|
JDZZ_SHARECODES |
|
JXNC_SHARECODES |
|
BOOKSHOP_SHARECODES |
|
JD_CASH_SHARECODES |
|
JDSGMH_SHARECODES |
|
JDCFD_SHARECODES |
|
JDHEALTH_SHARECODES |
|
JD818_SHARECODES |
|
CITY_SHARECODES |
|
MONEYTREE_SHARECODES |
|
) |
|
var_name=( |
|
ForOtherFruit |
|
ForOtherPet |
|
ForOtherBean |
|
ForOtherDreamFactory |
|
ForOtherJdFactory |
|
ForOtherJoy |
|
ForOtherJdzz |
|
ForOtherJxnc |
|
ForOtherBookShop |
|
ForOtherCash |
|
ForOtherSgmh |
|
ForOtherCfd |
|
ForOtherHealth |
|
ForOtherCarni |
|
ForOtherCity |
|
ForOtherMoneyTree |
|
) |
|
|
|
## name_js为脚本文件名，如果使用ql repo命令拉取，文件名含有作者名 |
|
## 所有有互助码的活动，把脚本名称列在 name_js 中，对应 config.sh 中互助码后缀列在 name_config 中，中文名称列在 name_chinese 中。 |
|
## name_js、name_config 和 name_chinese 中的三个名称必须一一对应。 |
|
name_js=( |
|
"$repo"_jd_fruit |
|
"$repo"_jd_pet |
|
"$repo"_jd_plantBean |
|
"$repo"_jd_dreamFactory |
|
"$repo"_jd_jdfactory |
|
"$repo"_jd_crazy_joy |
|
"$repo"_jd_jdzz |
|
"$repo"_jd_jxnc |
|
"$repo"_jd_bookshop |
|
"$repo"_jd_cash |
|
"$repo"_jd_sgmh |
|
"$repo"_jd_cfd |
|
"$repo"_jd_health |
|
"$repo"_jd_carnivalcity |
|
"$repo"_jd_city |
|
"$repo"_jd_moneyTree_heip |
|
"$repo"_jd_cfd |
|
) |
|
|
|
name_config=( |
|
Fruit |
|
Pet |
|
Bean |
|
DreamFactory |
|
JdFactory |
|
Joy |
|
Jdzz |
|
Jxnc |
|
BookShop |
|
Cash |
|
Sgmh |
|
Cfd |
|
Health |
|
Carni |
|
City |
|
MoneyTree |
|
TokenJxnc |
|
) |
|
|
|
name_chinese=( |
|
东东农场 |
|
东东萌宠 |
|
京东种豆得豆 |
|
京喜工厂 |
|
东东工厂 |
|
crazyJoy任务 |
|
京东赚赚 |
|
京喜农场 |
|
口袋书店 |
|
签到领现金 |
|
闪购盲盒 |
|
京喜财富岛 |
|
东东健康社区 |
|
京东手机狂欢城 |
|
城城领现金 |
|
摇钱树 |
|
京喜token |
|
) |
|
|
|
## 生成pt_pin清单 |
|
gen_pt_pin_array() { |
|
local envs=$(eval echo "\$JD_COOKIE") |
|
local array=($(echo $envs | sed 's/&/ /g')) |
|
local tmp1 tmp2 i pt_pin_temp |
|
for i in "${!array[@]}"; do |
|
pt_pin_temp=$(echo ${array[i]} | perl -pe "{s|.*pt_pin=([^; ]+)(?=;?).*|\1|; s|%|\\\x|g}") |
|
remark_name[i]=$(cat $dir_db/env.db | grep ${array[i]} | perl -pe "{s|.*remarks\":\"([^\"]+).*|\1|g}" | tail -1) |
|
[[ $pt_pin_temp == *\\x* ]] && pt_pin[i]=$(printf $pt_pin_temp) || pt_pin[i]=$pt_pin_temp |
|
done |
|
} |
|
|
|
## 导出互助码的通用程序，$1：去掉后缀的脚本名称，$2：config.sh中的后缀，$3：活动中文名称 |
|
export_codes_sub() { |
|
local task_name=$1 |
|
local config_name=$2 |
|
local chinese_name=$3 |
|
local config_name_my=My$config_name |
|
local config_name_for_other=ForOther$config_name |
|
local tmp_helptype=$HelpType |
|
local BreakHelpInterval=$(echo $BreakHelpNum | perl -pe "{s|~|-|; s|_|-|}" | sed 's/\(\d\+\)-\(\d\+\)/{\1..\2}/g') |
|
local BreakHelpNumArray=($(eval echo $BreakHelpInterval)) |
|
local BreakHelpNumVerify=$(echo $BreakHelpNum | sed 's/ //g' | perl -pe "{s|-||; s|~||; s|_||}" | sed 's/^\d\+$//g') |
|
local i j k m n t pt_pin_in_log code tmp_grep tmp_my_code tmp_for_other user_num tmp_helptype HelpTemp random_num_list |
|
local envs=$(eval echo "\$JD_COOKIE") |
|
local array=($(echo $envs | sed 's/&/ /g')) |
|
local user_sum=${#array[*]} |
|
if cd $dir_log/$task_name &>/dev/null && [[ $(ls) ]]; then |
|
## 寻找所有互助码以及对应的pt_pin |
|
i=0 |
|
pt_pin_in_log=() |
|
code=() |
|
pt_pin_and_code=$(ls -r *.log | xargs awk -v var="的$chinese_name好友互助码" 'BEGIN{FS="[（ ）】]+"; OFS="&"} $3~var {print $2,$4}') |
|
for line in $pt_pin_and_code; do |
|
pt_pin_in_log[i]=$(echo $line | awk -F "&" '{print $1}') |
|
code[i]=$(echo $line | awk -F "&" '{print $2}') |
|
let i++ |
|
done |
|
|
|
## 输出My系列变量 |
|
if [[ ${#code[*]} -gt 0 ]]; then |
|
for ((m = 0; m < ${#pt_pin[*]}; m++)); do |
|
tmp_my_code="" |
|
j=$((m + 1)) |
|
for ((n = 0; n < ${#code[*]}; n++)); do |
|
if [[ ${pt_pin[m]} == ${pt_pin_in_log[n]} ]]; then |
|
tmp_my_code=${code[n]} |
|
break |
|
fi |
|
done |
|
echo "$config_name_my$j='$tmp_my_code'" |
|
done |
|
else |
|
echo "## 从日志中未找到任何互助码" |
|
fi |
|
|
|
## 输出ForOther系列变量 |
|
if [[ ${#code[*]} -gt 0 ]]; then |
|
[[ $DiyHelpType = "1" ]] && diy_help_rules $2 |
|
case $tmp_helptype in |
|
0) ## 全部一致 |
|
HelpTemp="全部一致" |
|
echo -e "\n## 采用\"$HelpTemp\"互助模板：" |
|
tmp_for_other="" |
|
for ((m = 0; m < ${#pt_pin[*]}; m++)); do |
|
j=$((m + 1)) |
|
if [[ $BreakHelpType = "1" ]]; then |
|
if [ "$BreakHelpNumVerify" = "" ]; then |
|
for ((t = 0; t < ${#BreakHelpNumArray[*]}; t++)); do |
|
[[ "${BreakHelpNumArray[t]}" = "$j" ]] && continue 2 |
|
done |
|
tmp_for_other="$tmp_for_other@\${$config_name_my$j}" |
|
else |
|
echo -e "\n#【`date +%X`】 变量值填写不规范，请检查后重试！" |
|
tmp_for_other="$tmp_for_other@\${$config_name_my$j}" |
|
fi |
|
else |
|
tmp_for_other="$tmp_for_other@\${$config_name_my$j}" |
|
fi |
|
done |
|
echo "${config_name_for_other}1=\"$tmp_for_other\"" | perl -pe "s|($config_name_for_other\d+=\")@|\1|" |
|
for ((m = 1; m < ${#pt_pin[*]}; m++)); do |
|
j=$((m + 1)) |
|
echo "$config_name_for_other$j=\"$tmp_for_other\"" | perl -pe "s|($config_name_for_other\d+=\")@|\1|" |
|
done |
|
;; |
|
|
|
1) ## 均等助力 |
|
HelpTemp="均等助力" |
|
echo -e "\n## 采用\"$HelpTemp\"互助模板：" |
|
for ((m = 0; m < ${#pt_pin[*]}; m++)); do |
|
tmp_for_other="" |
|
j=$((m + 1)) |
|
for ((n = $m; n < $(($user_sum + $m)); n++)); do |
|
[[ $m -eq $n ]] && continue |
|
if [[ $((n + 1)) -le $user_sum ]]; then |
|
k=$((n + 1)) |
|
else |
|
k=$((n + 1 - $user_sum)) |
|
fi |
|
if [[ $BreakHelpType = "1" ]]; then |
|
if [ "$BreakHelpNumVerify" = "" ]; then |
|
for ((t = 0; t < ${#BreakHelpNumArray[*]}; t++)); do |
|
[[ "${BreakHelpNumArray[t]}" = "$k" ]] && continue 2 |
|
done |
|
tmp_for_other="$tmp_for_other@\${$config_name_my$k}" |
|
else |
|
echo -e "\n#【`date +%X`】 变量值填写不规范，请检查后重试！" |
|
tmp_for_other="$tmp_for_other@\${$config_name_my$k}" |
|
fi |
|
else |
|
tmp_for_other="$tmp_for_other@\${$config_name_my$k}" |
|
fi |
|
done |
|
echo "$config_name_for_other$j=\"$tmp_for_other\"" | perl -pe "s|($config_name_for_other\d+=\")@|\1|" |
|
done |
|
;; |
|
|
|
2) ## 本套脚本内账号间随机顺序助力 |
|
HelpTemp="随机顺序" |
|
echo -e "\n## 采用\"$HelpTemp\"互助模板：" |
|
for ((m = 0; m < ${#pt_pin[*]}; m++)); do |
|
tmp_for_other="" |
|
random_num_list=$(seq $user_sum | sort -R) |
|
j=$((m + 1)) |
|
for n in $random_num_list; do |
|
[[ $j -eq $n ]] && continue |
|
if [[ $BreakHelpType = "1" ]]; then |
|
if [ "$BreakHelpNumVerify" = "" ]; then |
|
for ((t = 0; t < ${#BreakHelpNumArray[*]}; t++)); do |
|
[[ "${BreakHelpNumArray[t]}" = "$n" ]] && continue 2 |
|
done |
|
tmp_for_other="$tmp_for_other@\${$config_name_my$n}" |
|
else |
|
echo -e "\n#【`date +%X`】 变量值填写不规范，请检查后重试！" |
|
tmp_for_other="$tmp_for_other@\${$config_name_my$n}" |
|
fi |
|
else |
|
tmp_for_other="$tmp_for_other@\${$config_name_my$n}" |
|
fi |
|
done |
|
echo "$config_name_for_other$j=\"$tmp_for_other\"" | perl -pe "s|($config_name_for_other\d+=\")@|\1|" |
|
done |
|
;; |
|
|
|
*) ## 按编号优先 |
|
HelpTemp="按编号优先" |
|
echo -e "\n## 采用\"$HelpTemp\"互助模板" |
|
for ((m = 0; m < ${#pt_pin[*]}; m++)); do |
|
tmp_for_other="" |
|
j=$((m + 1)) |
|
for ((n = 0; n < $user_sum; n++)); do |
|
[[ $m -eq $n ]] && continue |
|
k=$((n + 1)) |
|
if [[ $BreakHelpType = "1" ]]; then |
|
if [ "$BreakHelpNumVerify" = "" ]; then |
|
for ((t = 0; t < ${#BreakHelpNumArray[*]}; t++)); do |
|
[[ "${BreakHelpNumArray[t]}" = "$k" ]] && continue 2 |
|
done |
|
tmp_for_other="$tmp_for_other@\${$config_name_my$k}" |
|
else |
|
echo -e "\n#【`date +%X`】 变量值填写不规范，请检查后重试！" |
|
tmp_for_other="$tmp_for_other@\${$config_name_my$k}" |
|
fi |
|
else |
|
tmp_for_other="$tmp_for_other@\${$config_name_my$k}" |
|
fi |
|
done |
|
echo "$config_name_for_other$j=\"$tmp_for_other\"" | perl -pe "s|($config_name_for_other\d+=\")@|\1|" |
|
done |
|
;; |
|
esac |
|
fi |
|
else |
|
echo "#【`date +%X`】 未运行过 $task_name.js 脚本，未产生日志" |
|
fi |
|
} |
|
|
|
## 汇总输出 |
|
export_all_codes() { |
|
gen_pt_pin_array |
|
[[ $DEBUG = "1" ]] && echo -e "\n#【`date +%X`】 当前 code.sh 的线程数量：$ps_num" |
|
[[ $DEBUG = "1" ]] && echo -e "\n#【`date +%X`】 预设的 JD_COOKIE 数量：`echo $JD_COOKIE | grep -o 'pt_key' | wc -l`" |
|
[[ $DEBUG = "1" ]] && echo -e "\n#【`date +%X`】 预设的 JD_COOKIE 环境变量数量：`echo $JD_COOKIE | sed 's/&/\n/g' | wc -l`" |
|
[[ $DEBUG = "1" && "$(echo $JD_COOKIE | sed 's/&/\n/g' | wc -l)" = "1" && "$(echo $JD_COOKIE | grep -o 'pt_key' | wc -l)" -gt 1 ]] && echo -e "\n#【`date +%X`】 检测到您将多个 COOKIES 填写到单个环境变量值，请注意将各 COOKIES 采用 & 分隔，否则将无法完整输出互助码及互助规则！" |
|
echo -e "\n#【`date +%X`】 从日志提取互助码，编号和配置文件中Cookie编号完全对应，如果为空就是所有日志中都没有。\n\n#【`date +%X`】 即使某个MyXxx变量未赋值，也可以将其变量名填在ForOtherXxx中，jtask脚本会自动过滤空值。\n" |
|
if [[ $DiyHelpType = "1" ]]; then |
|
echo -e "#【`date +%X`】 您已启用指定活动采用指定互助模板功能！" |
|
else |
|
echo -n "#【`date +%X`】 您选择的互助码模板为：" |
|
case $HelpType in |
|
0) |
|
echo "所有账号助力码全部一致。" |
|
;; |
|
1) |
|
echo "所有账号机会均等助力。" |
|
;; |
|
2) |
|
echo "本套脚本内账号间随机顺序助力。" |
|
;; |
|
*) |
|
echo "按账号编号优先。" |
|
;; |
|
esac |
|
fi |
|
[[ $BreakHelpType = "1" ]] && echo -e "\n#【`date +%X`】 您已启用屏蔽模式，账号 $BreakHelpNum 将不被助力！" |
|
if [ "$ps_num" -gt $proc_num ]; then |
|
echo -e "\n#【`date +%X`】 检测到 code.sh 的线程过多 ，请稍后再试！" |
|
exit |
|
elif [ -z $repo ]; then |
|
echo -e "\n#【`date +%X`】 未检测到兼容的活动脚本日志，无法读取互助码，退出！" |
|
exit |
|
else |
|
echo -e "\n#【`date +%X`】 默认调用 $repo 的脚本日志，格式化导出互助码，生成互助规则！" |
|
dump_user_info |
|
for ((i = 0; i < ${#name_js[*]}; i++)); do |
|
echo -e "\n## ${name_chinese[i]}：" |
|
export_codes_sub "${name_js[i]}" "${name_config[i]}" "${name_chinese[i]}" |
|
done |
|
fi |
|
} |
|
|
|
#更新配置文件中互助码的函数 |
|
help_codes(){ |
|
local envs=$(eval echo "\$JD_COOKIE") |
|
local array=($(echo $envs | sed 's/&/ /g')) |
|
local user_sum=${#array[*]} |
|
local config_name=$1 |
|
local chinese_name=$2 |
|
local config_name_my=My$config_name |
|
local config_name_for_other=ForOther$config_name |
|
local ShareCode_dir="$dir_log/.ShareCode" |
|
local ShareCode_log="$ShareCode_dir/$config_name.log" |
|
local i j k |
|
|
|
#更新配置文件中的互助码 |
|
[[ ! -d $ShareCode_dir ]] && mkdir -p $ShareCode_dir |
|
[[ "$1" = "TokenJxnc" ]] && config_name_my=$1 |
|
if [ ! -f $ShareCode_log ] || [ -z "$(cat $ShareCode_log | grep "^$config_name_my\d")" ]; then |
|
echo -e "\n## $chinese_name\n${config_name_my}1=''\n" >> $ShareCode_log |
|
fi |
|
for ((i=1; i<=200; i++)); do |
|
local new_code="$(cat $latest_log_path | grep "^$config_name_my$i=.\+'$" | sed "s/\S\+'\([^']*\)'$/\1/")" |
|
local old_code="$(cat $ShareCode_log | grep "^$config_name_my$i=.\+'$" | sed "s/\S\+'\([^']*\)'$/\1/")" |
|
if [[ $i -le $user_sum ]]; then |
|
if [ -z "$(grep "^$config_name_my$i" $ShareCode_log)" ]; then |
|
sed -i "/^$config_name_my$[$i-1]='.*'/ s/$/\n$config_name_my$i=\'\'/" $ShareCode_log |
|
fi |
|
if [ "$new_code" != "$old_code" ]; then |
|
if [[ "$new_code" != "undefined" ]] && [[ "$new_code" != "{}" ]]; then |
|
sed -i "s/^$config_name_my$i='$old_code'$/$config_name_my$i='$new_code'/" $ShareCode_log |
|
fi |
|
fi |
|
elif [[ $i -gt $user_sum ]] && [[ $i -gt 1 ]]; then |
|
sed -i "/^$config_name_my$i/d" $ShareCode_log |
|
elif [[ $i -eq 1 ]] && [[ -z "$new_code" ]]; then |
|
sed -i "s/^$config_name_my$i='\S*'$/$config_name_my$i=''/" $ShareCode_log |
|
fi |
|
done |
|
sed -i "1c ## 上次导入时间：$(date +%Y年%m月%d日\ %X)" $ShareCode_log |
|
} |
|
|
|
#更新配置文件中互助规则的函数 |
|
help_rules(){ |
|
local envs=$(eval echo "\$JD_COOKIE") |
|
local array=($(echo $envs | sed 's/&/ /g')) |
|
local user_sum=${#array[*]} |
|
local config_name=$1 |
|
local chinese_name=$2 |
|
local config_name_my=My$config_name |
|
local config_name_for_other=ForOther$config_name |
|
local ShareCode_dir="$dir_log/.ShareCode" |
|
local ShareCode_log="$ShareCode_dir/$config_name.log" |
|
local i j k |
|
|
|
#更新配置文件中的互助规则 |
|
if [ -z "$(cat $ShareCode_log | grep "^$config_name_for_other\d")" ]; then |
|
echo -e "${config_name_for_other}1=\"\"" >> $ShareCode_log |
|
fi |
|
for ((j=1; j<=200; j++)); do |
|
local new_rule="$(cat $latest_log_path | grep "^$config_name_for_other$j=.\+\"$" | sed "s/\S\+\"\([^\"]*\)\"$/\1/")" |
|
local old_rule="$(cat $ShareCode_log | grep "^$config_name_for_other$j=.\+\"$" | sed "s/\S\+\"\([^\"]*\)\"$/\1/")" |
|
if [[ $j -le $user_sum ]]; then |
|
if [ -z "$(grep "^$config_name_for_other$j" $ShareCode_log)" ]; then |
|
sed -i "/^$config_name_for_other$[$j-1]=".*"/ s/$/\n$config_name_for_other$j=\"\"/" $ShareCode_log |
|
fi |
|
if [ "$new_rule" != "$old_rule" ]; then |
|
sed -i "s/^$config_name_for_other$j=\"$old_rule\"$/$config_name_for_other$j=\"$new_rule\"/" $ShareCode_log |
|
fi |
|
elif [[ $j -gt $user_sum ]] && [[ $j -gt 1 ]]; then |
|
sed -i "/^$config_name_for_other$j/d" $ShareCode_log |
|
elif [[ $j -eq 1 ]] && [[ -z "$new_rule" ]]; then |
|
sed -i "s/^$config_name_for_other$j=\"\S*\"$/$config_name_for_other$j=\"\"/" $ShareCode_log |
|
fi |
|
done |
|
sed -i "1c ## 上次导入时间：$(date +%Y年%m月%d日\ %X)" $ShareCode_log |
|
} |
|
|
|
export_codes_sub_only(){ |
|
if [ "$(cat $dir_scripts/"$repo"_jd_cfd.js | grep "// console.log(\`token")" != "" ]; then |
|
echo -e "\n# 正在修改 "$repo"_jd_cfd.js ，待完全运行 "$repo"_jd_cfd.js 后即可输出 token ！" |
|
fi |
|
sed -i 's/.*\(c.*log\).*\(${JSON.*token)}\).*/ \1(\`\\n【京东账号${$.index}（${$.UserName}）的京喜token好友互助码】\2\\n\`)/g' /ql/scripts/*_jd_cfd.js |
|
local task_name=$1 |
|
local config_name=$2 |
|
local chinese_name=$3 |
|
local i j k m n pt_pin_in_log code tmp_grep tmp_my_code tmp_for_other user_num random_num_list |
|
local envs=$(eval echo "\$JD_COOKIE") |
|
local array=($(echo $envs | sed 's/&/ /g')) |
|
local user_sum=${#array[*]} |
|
if cd $dir_log/$task_name &>/dev/null && [[ $(ls) ]]; then |
|
## 寻找所有互助码以及对应的pt_pin |
|
i=0 |
|
pt_pin_in_log=() |
|
code=() |
|
pt_pin_and_code=$(ls -r *.log | xargs awk -v var="的$chinese_name好友互助码" 'BEGIN{FS="[（ ）】]+"; OFS="&"} $3~var {print $2,$4}') |
|
for line in $pt_pin_and_code; do |
|
pt_pin_in_log[i]=$(echo $line | awk -F "&" '{print $1}') |
|
code[i]=$(echo $line | awk -F "&" '{print $2}') |
|
let i++ |
|
done |
|
|
|
## 输出互助码 |
|
if [[ ${#code[*]} -gt 0 ]]; then |
|
for ((m = 0; m < ${#pt_pin[*]}; m++)); do |
|
tmp_my_code="" |
|
j=$((m + 1)) |
|
for ((n = 0; n < ${#code[*]}; n++)); do |
|
if [[ ${pt_pin[m]} == ${pt_pin_in_log[n]} ]]; then |
|
tmp_my_code=${code[n]} |
|
break |
|
fi |
|
done |
|
echo "$config_name$j='$tmp_my_code'" |
|
done |
|
else |
|
echo "## 从日志中未找到任何互助码" |
|
fi |
|
fi |
|
} |
|
|
|
#更新互助码和互助规则 |
|
update_help(){ |
|
case $UpdateType in |
|
1) |
|
if [ "$ps_num" -le $proc_num ] && [ -f $latest_log_path ]; then |
|
backup_del |
|
echo -e "\n#【`date +%X`】 开始更新配置文件的互助码和互助规则" |
|
for ((i = 0; i < ${#name_config[*]}; i++)); do |
|
help_codes "${name_config[i]}" "${name_chinese[i]}" |
|
[[ "${name_config[i]}" != "TokenJxnc" ]] && help_rules "${name_config[i]}" "${name_chinese[i]}" |
|
done |
|
echo -e "\n#【`date +%X`】 配置文件的互助码和互助规则已完成更新" |
|
elif [ ! -f $latest_log_path ]; then |
|
echo -e "\n#【`date +%X`】 日志文件不存在，请检查后重试！" |
|
fi |
|
;; |
|
2) |
|
if [ "$ps_num" -le $proc_num ] && [ -f $latest_log_path ]; then |
|
backup_del |
|
echo -e "\n#【`date +%X`】 开始更新配置文件的互助码，不更新互助规则" |
|
for ((i = 0; i < ${#name_config[*]}; i++)); do |
|
help_codes "${name_config[i]}" "${name_chinese[i]}" |
|
done |
|
echo -e "\n#【`date +%X`】 配置文件的互助码已完成更新" |
|
elif [ ! -f $latest_log_path ]; then |
|
echo -e "\n#【`date +%X`】 日志文件不存在，请检查后重试！" |
|
fi |
|
;; |
|
3) |
|
if [ "$ps_num" -le $proc_num ] && [ -f $latest_log_path ]; then |
|
backup_del |
|
echo -e "\n#【`date +%X`】 开始更新配置文件的互助规则，不更新互助码" |
|
for ((i = 0; i < ${#name_config[*]}; i++)); do |
|
[[ "${name_config[i]}" != "TokenJxnc" ]] && help_rules "${name_config[i]}" "${name_chinese[i]}" |
|
done |
|
echo -e "\n#【`date +%X`】 配置文件的互助规则已完成更新" |
|
elif [ ! -f $latest_log_path ]; then |
|
echo -e "\n#【`date +%X`】 日志文件不存在，请检查后重试！" |
|
fi |
|
;; |
|
*) |
|
echo -e "\n#【`date +%X`】 您已设置不更新配置文件的互助码和互助规则，跳过更新！" |
|
;; |
|
esac |
|
} |
|
|
|
check_jd_cookie(){ |
|
local test_connect="$(curl -I -s --connect-timeout 5 https://bean.m.jd.com/bean/signIndex.action -w %{http_code} | tail -n1)" |
|
local test_jd_cookie="$(curl -s --noproxy "*" "https://bean.m.jd.com/bean/signIndex.action" -H "cookie: $1")" |
|
if [ "$test_connect" -eq "302" ]; then |
|
[[ "$test_jd_cookie" ]] && echo "(COOKIE 有效)" || echo "(COOKIE 已失效)" |
|
else |
|
echo "(API 连接失败)" |
|
fi |
|
} |
|
|
|
dump_user_info(){ |
|
echo -e "\n## 账号用户名及 COOKIES 整理如下：" |
|
local envs=$(eval echo "\$JD_COOKIE") |
|
local array=($(echo $envs | sed 's/&/ /g')) |
|
for ((m = 0; m < ${#pt_pin[*]}; m++)); do |
|
j=$((m + 1)) |
|
echo -e "## 用户名 $j：${pt_pin[m]} 备注：${remark_name[m]} `check_jd_cookie ${array[m]}`\nCookie$j=\"${array[m]}\"" |
|
done |
|
} |
|
|
|
backup_del(){ |
|
[[ ! -d $dir_log/.bak_ShareCode ]] && mkdir -p $dir_log/.bak_ShareCode |
|
local bak_ShareCode_full_path_list=$(find $dir_log/.bak_ShareCode/ -name "*.log") |
|
local diff_time |
|
if [[ $BACKUP = "1" ]]; then |
|
for ((i = 0; i < ${#name_config[*]}; i++)); do |
|
[[ -f $dir_log/.ShareCode/${name_config[i]}.log ]] && cp $dir_log/.ShareCode/${name_config[i]}.log $dir_log/.bak_ShareCode/${name_config[i]}_`date "+%Y-%m-%d-%H-%M-%S"`.log |
|
done |
|
fi |
|
if [[ $CLEANBAK = "1" ]]; then |
|
for log in $bak_ShareCode_full_path_list; do |
|
local log_date=$(echo $log | awk -F "_" '{print $NF}' | cut -c1-10) |
|
if [[ $(date +%s -d $log_date 2>/dev/null) ]]; then |
|
if [[ $is_macos -eq 1 ]]; then |
|
diff_time=$(($(date +%s) - $(date -j -f "%Y-%m-%d" "$log_date" +%s))) |
|
else |
|
diff_time=$(($(date +%s) - $(date +%s -d "$log_date"))) |
|
fi |
|
[[ $diff_time -gt $(($CLEANBAK_DAYS * 86400)) ]] && rm -vf $log |
|
fi |
|
done |
|
fi |
|
} |
|
|
|
install_dependencies_normal(){ |
|
for i in $@; do |
|
case $i in |
|
canvas) |
|
cd /ql/scripts |
|
if [[ "$(echo $(npm ls $i) | grep ERR)" != "" ]]; then |
|
npm uninstall $i |
|
fi |
|
if [[ "$(npm ls $i)" =~ (empty) ]]; then |
|
apk add --no-cache build-base g++ cairo-dev pango-dev giflib-dev && npm i $i --prefix /ql/scripts --build-from-source |
|
fi |
|
;; |
|
*) |
|
if [[ "$(npm ls $i)" =~ $i ]]; then |
|
npm uninstall $i |
|
elif [[ "$(echo $(npm ls $i -g) | grep ERR)" != "" ]]; then |
|
npm uninstall $i -g |
|
fi |
|
if [[ "$(npm ls $i -g)" =~ (empty) ]]; then |
|
[[ $i = "typescript" ]] && npm i $i -g --force || npm i $i -g |
|
fi |
|
;; |
|
esac |
|
done |
|
} |
|
|
|
install_dependencies_force(){ |
|
for i in $@; do |
|
case $i in |
|
canvas) |
|
cd /ql/scripts |
|
if [[ "$(npm ls $i)" =~ $i && "$(echo $(npm ls $i) | grep ERR)" != "" ]]; then |
|
npm uninstall $i |
|
rm -rf /ql/scripts/node_modules/$i |
|
rm -rf /usr/local/lib/node_modules/lodash/* |
|
fi |
|
if [[ "$(npm ls $i)" =~ (empty) ]]; then |
|
apk add --no-cache build-base g++ cairo-dev pango-dev giflib-dev && npm i $i --prefix /ql/scripts --build-from-source --force |
|
fi |
|
;; |
|
*) |
|
cd /ql/scripts |
|
if [[ "$(npm ls $i)" =~ $i ]]; then |
|
npm uninstall $i |
|
rm -rf /ql/scripts/node_modules/$i |
|
rm -rf /usr/local/lib/node_modules/lodash/* |
|
elif [[ "$(npm ls $i -g)" =~ $i && "$(echo $(npm ls $i -g) | grep ERR)" != "" ]]; then |
|
npm uninstall $i -g |
|
rm -rf /ql/scripts/node_modules/$i |
|
rm -rf /usr/local/lib/node_modules/lodash/* |
|
fi |
|
if [[ "$(npm ls $i -g)" =~ (empty) ]]; then |
|
npm i $i -g --force |
|
fi |
|
;; |
|
esac |
|
done |
|
} |
|
|
|
install_dependencies_all(){ |
|
install_dependencies_normal $package_name |
|
for i in $package_name; do |
|
{install_dependencies_force $i} & |
|
done |
|
} |
|
|
|
kill_proc(){ |
|
ps -ef|grep "$1"|grep -Ev "$2"|awk '{print $1}'|xargs kill -9 |
|
} |
|
|
|
## 执行并写入日志 |
|
kill_proc "code.sh" "grep|$$" >/dev/null 2>&1 |
|
[[ $FixDependType = "1" ]] && [[ "$ps_num" -le $proc_num ]] && install_dependencies_all >/dev/null 2>&1 & |
|
latest_log=$(ls -r $dir_code | head -1) |
|
latest_log_path="$dir_code/$latest_log" |
|
ps_num="$(ps | grep code.sh | grep -v grep | wc -l)" |
|
export_all_codes | perl -pe "{s|京东种豆|种豆|; s|crazyJoy任务|疯狂的JOY|}" |
|
sleep 5 |
|
update_help |
|
|
|
## 修改curtinlv入会领豆配置文件的参数 |
|
[[ -f /ql/repo/curtinlv_JD-Script/OpenCard/OpenCardConfig.ini ]] && sed -i "4c JD_COOKIE = '$(echo $JD_COOKIE | sed "s/&/ /g; s/\S*\(pt_key=\S\+;\)\S*\(pt_pin=\S\+;\)\S*/\1\2/g;" | perl -pe "s| |&|g")'" /ql/repo/curtinlv_JD-Script/OpenCard/OpenCardConfig.ini |
改成你实际的目录就行，这个deps目录是2.10.7版本之后的