Created
August 30, 2017 13:45
-
-
Save g000444555/7fcdae531b470f180b2d0c0ae53d8f81 to your computer and use it in GitHub Desktop.
Serial console output that indicates the custom runtime hook (customhook1) does not run upon reboot
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| sudo reboot | |
| [ 2334.942424] watchdog watchdog0: watchdog did not stop! | |
| [ 2336.533085] watchdog watchdog0: watchdog did not stop! | |
| [ 2338.297617] reboot: Restarting system | |
| INFO: PSCI Affinity Map: | |
| INFO: AffInst: Level 0, MPID 0x0, State ON | |
| INFO: AffInst: Level 0, MPID 0x1, State ON | |
| INFO: AffInst: Level 0, MPID 0x2, State ON | |
| INFO: AffInst: Level 0, MPID 0x3, State ON | |
| bl31 rebïGXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:800;NAND:81;SD:0;READ:0;CHK:0; | |
| TE: 709634 | |
| no sdio debug board detected | |
| BL2 Built : 11:44:26, Nov 25 2015. | |
| gxb gfb13a3b-c2 - jcao@wonton | |
| Board ID = 8 | |
| set vcck to 1100 mv | |
| set vddee to 1050 mv | |
| CPU clk: 1536MHz | |
| DDR channel setting: DDR0 Rank0+1 same | |
| DDR0: 2048MB(auto) @ 912MHz(2T)-13 | |
| DataBus test pass! | |
| AddrBus test pass! | |
| Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x000000b0 | |
| Load bl30 from SD, src: 0x00010200, des: 0x01000000, size: 0x00009ef0 | |
| Sending bl30........................................OK. | |
| Run bl30... | |
| Load bl301 from SD, src: 0x0001c200, des: 0x01000000, size: 0x000018c0 | |
| Wait bl30...Done | |
| Sending bl301.......OK. | |
| Run bl301... | |
| Load bl31 from SD, src: 0x00020200, des: 0x10100000, size: 0x00011130 | |
| --- UART initialized after reboot --- | |
| [Reset cause: unknown] | |
| [Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@droid04] | |
| bl30: check_permit, count is 1 | |
| bl30: check_permit: ok! | |
| chipid: ef be ad de d f0Load bl33 from SD, src: 0x00034200, des: 0x01000000, size: 0x000723d0 | |
| ad ba ef be ad de not ES chip | |
| [0.825102 Inits done] | |
| secure task start! | |
| high task start! | |
| low task start! | |
| NOTICE: BL3-1: v1.0(debug):4d2e34d | |
| NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015 | |
| INFO: BL3-1: Initializing runtime services | |
| INFO: BL3-1: Preparing for EL3 exit to normal world | |
| INFO: BL3-1: Next image address = 0x1000000 | |
| INFO: BL3-1: Next image spsr = 0x3c9 | |
| U-Boot 2015.01-17 (Mar 07 2017 - 18:57:17) Arch Linux ARM | |
| DRAM: 2 GiB | |
| Relocation Offset is: 76f33000 | |
| ------------------------------------------------- | |
| * Welcome to Hardkernel's ODROID-C2 | |
| ------------------------------------------------- | |
| CPU : AMLogic S905 | |
| S/N : HKC213254DFDD8E9 | |
| MAC : 00:1e:06:34:25:69 | |
| BID : HKC2211703 | |
| ------------------------------------------------- | |
| register usb cfg[1][0] = 0000000077f94cc0 | |
| register usb cfg[0][1] = 0000000077f94ce0 | |
| vpu detect type: 5 | |
| vpu clk_level = 7 | |
| set vpu clk: 666667000Hz, readback: 666660000Hz(0x300) | |
| MMC: aml_priv->desc_buf = 0x0000000073f2bd30 | |
| aml_priv->desc_buf = 0x0000000073f2dec0 | |
| SDIO Port B: 0, SDIO Port C: 1 | |
| ret = 1 .[mmc_init] mmc init success | |
| In: serial | |
| Out: serial | |
| Err: serial | |
| ---------------------------------- | |
| MMC Size : 32 GB | |
| ---------------------------------- | |
| ** Unrecognized filesystem type ** | |
| ** Unrecognized filesystem type ** | |
| movi: the partiton 'logo' is reading... | |
| MMC read: dev # 0, block # 61024, count 2048 ... 2048 blocks read: OK | |
| hpd_state=1 | |
| [CANVAS]addr=0x3f800000 width=3840, height=1440 | |
| set hdmitx VIC = 16 | |
| hdmitx phy setting done | |
| set hdmitx VIC = 16 | |
| hdmitx phy setting done | |
| Error: Bad gzipped data | |
| There is no valid bmp file at the given address | |
| Net: Meson_Ethernet | |
| Hit [Enter] key twice to stop autoboot: 1 0 | |
| 7197 bytes read in 19 ms (369.1 KiB/s) | |
| cfgload: applying boot.ini... | |
| cfgload: setenv display_autodetect "true" | |
| cfgload: setenv m "1080p60hz" # Progressive 60Hz | |
| cfgload: setenv m_bpp "32" | |
| cfgload: setenv hpd "true" | |
| cfgload: setenv monitor_onoff "false" # true or false | |
| cfgload: setenv nographics "0" | |
| cfgload: setenv mesontimer "1" | |
| cfgload: setenv disableuhs "false" | |
| cfgload: setenv mmc_removable "true" | |
| cfgload: setenv usbmulticam "false" | |
| cfgload: setenv disable_vu7 "true" | |
| cfgload: setenv condev "console=ttyS0,115200n8 console=tty0" # on both | |
| cfgload: setenv maxcpus "4" | |
| cfgload: setenv max_freq "1536" # 1.536GHz | |
| cfgload: if test "${display_autodetect}" = "true"; then usb pwren; hdmitx edid; fi | |
| USB0: dwc_usb driver version: 2.94 6-June-2012 | |
| USB (1) peri reg base: c0000020 | |
| USB (1) use clock source: XTAL input, div: 1 | |
| USB (1) base addr: 0xc9100000 | |
| Force id mode: Host | |
| dwc_otg: Highspeed device found ! | |
| .............................. | |
| .............................. | |
| .............................. | |
| .............................. | |
| .............................. | |
| .............................. | |
| .............................. | |
| .............................. | |
| .............................. | |
| .............................. | |
| .............................. | |
| .............................. | |
| .............................. | |
| .............................. | |
| .............................. | |
| .............................. | |
| edid extension block number : 1 | |
| [edid-decode] edid.bin doesn't exist, now build edid.bin | |
| ** Unable to use mmc 0:1 for fatwrite ** | |
| No header found | |
| Manufacturer: @@@ Model 0 Serial Number 0 | |
| EDID version: 0.0 | |
| Analog display, Input voltage level: 0.7/0.3 V | |
| Sync: | |
| Established timings supported: | |
| Standard timings supported: | |
| non-conformant standard timing (0 horiz) | |
| non-conformant standard timing (0 horiz) | |
| non-conformant standard timing (0 horiz) | |
| non-conformant standard timing (0 horiz) | |
| non-conformant standard timing (0 horiz) | |
| non-conformant standard timing (0 horiz) | |
| non-conformant standard timing (0 horiz) | |
| non-conformant standard timing (0 horiz) | |
| Manufacturer-specified data, tag 0 | |
| Manufacturer-specified data, tag 0 | |
| Manufacturer-specified data, tag 0 | |
| Manufacturer-specified data, tag 0 | |
| Checksum: 0x0 (valid) | |
| bestmode is 1080p60hz, IEEEOUI 0x000000 | |
| DVI Mode | |
| NOT EXIST, now build display.bin | |
| ** Unable to use mmc 0:1 for fatwrite ** | |
| cfgload: if test "${m}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi | |
| cfgload: if test "${disable_vu7}" = "false"; then setenv hid_quirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi | |
| cfgload: setenv bootargs "root=/dev/mmcblk0p1 rootwait rw ${condev} no_console_suspend hdmimode=${m} ${cmode} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam} ${hid_quirks}" | |
| cfgload: setenv loadaddr "0x11000000" | |
| cfgload: setenv dtb_loadaddr "0x1000000" | |
| cfgload: setenv initrd_loadaddr "0x13000000" | |
| cfgload: load mmc 0:1 ${loadaddr} /boot/Image | |
| 13412024 bytes read in 616 ms (20.8 MiB/s) | |
| cfgload: load mmc 0:1 ${dtb_loadaddr} /boot/dtbs/meson64_odroidc2.dtb | |
| 29835 bytes read in 22 ms (1.3 MiB/s) | |
| cfgload: fdt addr ${dtb_loadaddr} | |
| cfgload: if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi | |
| cfgload: if test "${mesontimer}" = "1"; then fdt rm /timer; fi | |
| cfgload: if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi | |
| cfgload: if test "${nographics}" = "1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /picdec; fdt rm /ppmgr; fi | |
| cfgload: if test "${nographics}" = "1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi | |
| cfgload: if test "${nographics}" = "1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi | |
| cfgload: load mmc 0:1 ${initrd_loadaddr} /boot/initramfs-linux.img | |
| 10520955 bytes read in 486 ms (20.6 MiB/s) | |
| cfgload: booti ${loadaddr} ${initrd_loadaddr}:${filesize} ${dtb_loadaddr} | |
| load dtb from 0x1000000 ...... | |
| ## Flattened Device Tree blob at 01000000 | |
| Booting using the fdt blob at 0x1000000 | |
| Loading Ramdisk to 73520000, end 73f2897b ... OK | |
| Loading Device Tree to 000000001fff5000, end 000000001ffff48a ... OK | |
| Starting kernel ... | |
| uboot time: 5962355 us | |
| [ 0.000000] Initializing cgroup subsys cpuset | |
| [ 0.000000] Initializing cgroup subsys cpu | |
| [ 0.000000] Initializing cgroup subsys cpuacct | |
| [ 0.000000] Linux version 3.14.79-27-ARCH (builduser@leming) (gcc version 7.1.1 20170516 (GCC) ) #1 SMP PREEMPT Mon Jul 10 19:29:37 MDT 2017 | |
| [ 0.000000] CPU: AArch64 Processor [410fd034] revision 4 | |
| [ 0.000000] secmon: share mem setup | |
| [ 0.000000] Reserved memory: initialized node linux,secmon, compatible id aml_secmon_memory | |
| [ 0.000000] __reserved_mem_alloc_size: linux,meson-fb | |
| [ 0.000000] fb: Reserved memory: created fb at 0x0000000078000000, size 128 MiB | |
| [ 0.000000] Reserved memory: initialized node linux,meson-fb, compatible id amlogic, fb-memory | |
| [ 0.000000] __reserved_mem_alloc_size: linux,di | |
| [ 0.000000] DI reserved memory: created CMA memory pool at 0x0000000076200000, size 30 MiB | |
| [ 0.000000] Reserved memory: initialized node linux,di, compatible id amlogic, di-mem | |
| [ 0.000000] __reserved_mem_alloc_size: linux,ion-dev | |
| [ 0.000000] linux,ion-dev add multi user:ffffffc001d1d1f0 | |
| [ 0.000000] ion_dev mem setup | |
| [ 0.000000] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem | |
| [ 0.000000] ppmgr share mem setup | |
| [ 0.000000] linux,ion-dev add multi user:ffffffc001d25d70 | |
| [ 0.000000] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem | |
| [ 0.000000] __reserved_mem_alloc_size: linux,codec_mm_cma | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000067800000, size 188 MiB | |
| [ 0.000000] Reserved memory: initialized node linux,codec_mm_cma, compatible id shared-dma-pool | |
| [ 0.000000] __reserved_mem_alloc_size: linux,picdec | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000064800000, size 48 MiB | |
| [ 0.000000] Reserved memory: initialized node linux,picdec, compatible id shared-dma-pool | |
| [ 0.000000] __reserved_mem_alloc_size: linux,codec_mm_reserved | |
| [ 0.000000] codec_mm:vdec: reserved mem setup | |
| [ 0.000000] Reserved memory: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved | |
| [ 0.000000] __reserved_mem_alloc_size: linux,jpegenc_cma | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x000000005e000000, size 36 MiB | |
| [ 0.000000] Reserved memory: initialized node linux,jpegenc_cma, compatible id shared-dma-pool | |
| [ 0.000000] cma: Reserved 8 MiB at 5d800000 | |
| [ 0.000000] psci: probing function IDs from device-tree | |
| [ 0.000000] PERCPU: Embedded 11 pages/cpu @ffffffc074199000 s16000 r8192 d20864 u45056 | |
| [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 478344 | |
| [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootwait rw console=ttyS0,115200n8 console=tty0 no_console_suspend hdmimode=1080p60hz m_bpp=32 vout=dvi fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=true max_freq=1536 maxcpus=4 monitor_onoff=false disableuhs=false mmc_removable=true usbmulticam=false | |
| [ 0.000000] logo: get hdmimode: 1080p60hz | |
| [ 0.000000] dvfs [get_max_freq] - max_freq : 1536000000 | |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) | |
| [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) | |
| [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) | |
| [ 0.000000] Memory: 1460924K/1947648K available (8953K kernel code, 653K rwdata, 2896K rodata, 587K init, 4096K bss, 486724K reserved) | |
| [ 0.000000] Virtual kernel memory layout: | |
| [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB) | |
| [ 0.000000] vmemmap : 0xffffff8040010000 - 0xffffff80421d0000 ( 33 MB) | |
| [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) | |
| [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc078000000 ( 1920 MB) | |
| [ 0.000000] .init : 0xffffffc001c14000 - 0xffffffc001ca6e80 ( 588 kB) | |
| [ 0.000000] .text : 0xffffffc001080000 - 0xffffffc001c137a4 ( 11854 kB) | |
| [ 0.000000] .data : 0xffffffc001ca7000 - 0xffffffc001d4a6a0 ( 654 kB) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] Preemptible hierarchical RCU implementation. | |
| [ 0.000000] NR_IRQS:64 nr_irqs:64 0 | |
| [ 0.000006] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns | |
| [ 0.000024] mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000a994 | |
| [ 0.000067] local timer MESON TIMER-G mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000c998 | |
| [ 0.000087] local timer MESON TIMER-H mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000e99c | |
| [ 0.000106] local timer MESON TIMER-I mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff80000109a0 | |
| [ 0.000115] Switching to timer-based delay loop | |
| [ 0.000327] Console: colour dummy device 80x25 | |
| [ 0.000754] console [tty0] enabled | |
| [ 0.003107] allocated 8388608 bytes of page_cgroup | |
| [ 0.003114] please try 'cgroup_disable=memory' option if you don't want memory cgroups | |
| [ 0.003130] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) | |
| [ 0.003146] pid_max: default: 32768 minimum: 301 | |
| [ 0.003218] Security Framework initialized | |
| [ 0.003234] AppArmor: AppArmor disabled by boot time parameter | |
| [ 0.003268] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) | |
| [ 0.003278] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) | |
| [ 0.003672] Initializing cgroup subsys debug | |
| [ 0.003684] Initializing cgroup subsys memory | |
| [ 0.003700] Initializing cgroup subsys devices | |
| [ 0.003710] Initializing cgroup subsys freezer | |
| [ 0.003720] Initializing cgroup subsys net_cls | |
| [ 0.003728] Initializing cgroup subsys blkio | |
| [ 0.003736] Initializing cgroup subsys perf_event | |
| [ 0.003747] Initializing cgroup subsys hugetlb | |
| [ 0.003924] /cpus/cpu@0: Missing clock-frequency property | |
| [ 0.003936] /cpus/cpu@1: Missing clock-frequency property | |
| [ 0.003948] /cpus/cpu@2: Missing clock-frequency property | |
| [ 0.003959] /cpus/cpu@3: Missing clock-frequency property | |
| [ 0.003969] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available | |
| [ 0.040157] Meson chip version = RevC (1F:C - 0:0) | |
| [ 0.060785] CPU1: Booted secondary processor | |
| [ 0.080758] CPU2: Booted secondary processor | |
| [ 0.100751] CPU3: Booted secondary processor | |
| [ 0.100803] Brought up 4 CPUs | |
| [ 0.100827] SMP: Total of 4 processors activated. | |
| [ 0.101265] devtmpfs: initialized | |
| [ 0.110970] xor: measuring software checksum speed | |
| [ 0.210067] 8regs : 2946.400 MB/sec | |
| [ 0.310048] 8regs_prefetch: 2626.400 MB/sec | |
| [ 0.410046] 32regs : 3621.600 MB/sec | |
| [ 0.510046] 32regs_prefetch: 3044.000 MB/sec | |
| [ 0.510054] xor: using function: 32regs (3621.600 MB/sec) | |
| [ 0.510070] pinctrl core: initialized pinctrl subsystem | |
| [ 0.510293] regulator-dummy: no parameters | |
| [ 0.511903] device-tree: Duplicate name in efusekey, renamed to "key0#1" | |
| [ 0.511929] device-tree: Duplicate name in efusekey, renamed to "key1#1" | |
| [ 0.511953] device-tree: Duplicate name in efusekey, renamed to "key2#1" | |
| [ 0.511978] device-tree: Duplicate name in efusekey, renamed to "key3#1" | |
| [ 0.513739] NET: Registered protocol family 16 | |
| [ 0.514527] register canvas platform driver | |
| [ 0.514537] codec:ignore bus ops for cpu=25 | |
| [ 0.514544] codec:ignore bus ops for cpu=29 | |
| [ 0.514551] codec:register amports ops for bus[0] | |
| [ 0.514557] codec:register amports ops for bus[4] | |
| [ 0.514564] codec:register amports ops for bus[3] | |
| [ 0.514572] codec:register amports ops for bus[2] | |
| [ 0.514578] codec:register amports ops for bus[1] | |
| [ 0.514585] codec:register amports ops for bus[13] | |
| [ 0.514592] codec:register amports ops for bus[2] | |
| [ 0.514598] codec:register amports ops for bus[14] | |
| [ 0.514620] register rdma platform driver | |
| [ 0.515080] vdso: 2 pages (1 code, 1 data) at base ffffffc001cae000 | |
| [ 0.515116] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.515594] DMA: preallocated 256 KiB pool for atomic allocations | |
| [ 0.516790] software IO TLB [mem 0x5a000000-0x5a400000] (4MB) mapped at [ffffffc05a000000-ffffffc05a3fffff] | |
| [ 0.516802] Serial: AMBA PL011 UART driver | |
| [ 0.516880] hdmitx: system: amhdmitx_init | |
| [ 0.516887] hdmitx: system: Ver: 2014May6 | |
| [ 0.516915] tv_vout: tv_init_module | |
| [ 0.516927] tv_vout: major number 254 for disp | |
| [ 0.516934] vout_notify: vout_register_server | |
| [ 0.516941] tv_vout: register tv module server ok | |
| [ 0.516967] codec_mm:codec_mm_module_init | |
| [ 0.517083] gxbb clk HIU base is 0xffffff800005a000 | |
| [ 0.517091] gxbb clk ao base is 0xffffff800005c000 | |
| [ 0.517127] register mpll_clk_out0 success done | |
| [ 0.517138] register mpll_clk_out1 success done | |
| [ 0.517149] register mpll_clk_out2 success done | |
| [ 0.517306] register sys pll success done | |
| [ 0.517346] clkrate [ xtal ] : 24000000Hz | |
| [ 0.517354] clkrate [ 32Khz ] : 32000Hz | |
| [ 0.517362] clkrate [ clk81 ] : 166666666Hz | |
| [ 0.517369] clkrate [ fixed_pll ] : 2000000000Hz | |
| [ 0.517377] clkrate [ fclk_div2 ] : 1000000000Hz | |
| [ 0.517385] clkrate [ fclk_div3 ] : 666666000Hz | |
| [ 0.517392] clkrate [ fclk_div4 ] : 500000000Hz | |
| [ 0.517399] clkrate [ fclk_div5 ] : 400000000Hz | |
| [ 0.517406] clkrate [ fclk_div7 ] : 285714000Hz | |
| [ 0.517433] gxbb clock initialization complete | |
| [ 0.517541] msr_clk_reg0=ffffff800005e75c,msr_clk_reg2=ffffff800006a764 | |
| [ 0.518346] amlogic iomap probe done | |
| [ 0.518576] Init pinux probe! | |
| [ 0.519262] pinmux-gxbb c1109880.pinmux: Probed amlogic pinctrl driver | |
| [ 0.519500] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xa8) | |
| [ 0.519518] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xa8) | |
| [ 0.519576] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xa8) | |
| [ 0.519593] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xa8) | |
| [ 0.519766] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 1536000000 | |
| [ 0.520189] codec:codec map io source 0x00000000c1100000,size=1048576 to 0xffffff8000680000 | |
| [ 0.520207] codec:codec map io source 0x00000000c8820000,size=65536 to 0xffffff80000a0000 | |
| [ 0.520224] codec:codec map io source 0x00000000c883c000,size=8192 to 0xffffff8000094000 | |
| [ 0.520250] codec:codec map io source 0x00000000c8100000,size=1048576 to 0xffffff8000800000 | |
| [ 0.520268] codec:codec map io source 0x00000000d0100000,size=262144 to 0xffffff8000980000 | |
| [ 0.520283] codec:codec map io source 0x00000000c8838000,size=1024 to 0xffffff8000092000 | |
| [ 0.520342] codec_mm has 2 memory regions | |
| [ 0.520356] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma ok | |
| [ 0.520369] codec_mm:codec_mm_reserved_init 0000000060700000->0000000064800000 | |
| [ 0.520381] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_reserved ok | |
| [ 0.520391] codec_mm:codec_mm_probe mem init done | |
| [ 0.520400] codec_mm:add reserve memory 0000000060700000(aligned 0000000060700000) size=4100000(aligned 4100000) | |
| [ 0.520424] codec_mm has 2 memory regions | |
| [ 0.520435] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma ok | |
| [ 0.520447] codec_mm:codec_mm_reserved_init 0000000060700000->0000000064800000 | |
| [ 0.520458] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_reserved ok | |
| [ 0.520467] codec_mm:codec_mm reserved memory probed done | |
| [ 0.520474] codec_mm:codec_mm_probe ok | |
| [ 0.521047] VPU driver version: v01 | |
| [ 0.521055] vpu driver detect cpu type: gxbaby | |
| [ 0.521068] load vpu_clk in dts: 666667000Hz(7) | |
| [ 0.521091] vpu_probe OK | |
| [ 0.521267] hdmitx: system: amhdmitx_probe | |
| [ 0.521481] hdmitx hpd irq = 89 | |
| [ 0.521658] hdmitx20: Mapped PHY: 0xc0800000 | |
| [ 0.521669] hdmitx20: Mapped PHY: 0xc1104400 | |
| [ 0.521689] hdmitx20: Mapped PHY: 0xc8100000 | |
| [ 0.521698] hdmitx20: Mapped PHY: 0xc8834000 | |
| [ 0.521705] hdmitx20: Mapped PHY: 0xc883a000 | |
| [ 0.521713] hdmitx20: Mapped PHY: 0xc883c000 | |
| [ 0.521725] hdmitx20: Mapped PHY: 0xd0100000 | |
| [ 0.521733] hdmitx20: Mapped PHY: 0xda83a000 | |
| [ 0.521746] hdmitx: alread display in uboot 0x10 | |
| [ 0.521769] avmute set to 1 | |
| [ 0.522055] canvas_probe reg=00000000c8838000,size=400 | |
| [ 0.522069] canvas maped reg_base =ffffff800009e000 | |
| [ 0.525149] rdma_probe | |
| [ 0.552471] bio: create slab <bio-0> at 0 | |
| [ 0.720055] raid6: int64x1 523 MB/s | |
| [ 0.890084] raid6: int64x2 868 MB/s | |
| [ 1.060080] raid6: int64x4 1336 MB/s | |
| [ 1.060089] hdmitx: plugin | |
| [ 1.124473] hdmitx: edid: raw data are all zeroes | |
| [ 1.124481] EDID Parser: | |
| [ 1.131043] EDID BlockCount=0 | |
| [ 1.131051] hdmitx: edid: HDMI: set default vic | |
| [ 1.131064] hdmitx: video: get current mode: null | |
| [ 1.131071] hdmtix: set audio | |
| [ 1.131083] hdmitx tx_aud_src = 0 | |
| [ 1.131111] hdmitx aud_n_para = 24576 | |
| [ 1.131131] hdmitx set channel status | |
| [ 1.230066] raid6: int64x8 1256 MB/s | |
| [ 1.400113] raid6: neonx1 941 MB/s | |
| [ 1.570072] raid6: neonx2 1504 MB/s | |
| [ 1.740078] raid6: neonx4 1940 MB/s | |
| [ 1.910057] raid6: neonx8 2010 MB/s | |
| [ 1.910065] raid6: using algorithm neonx8 (2010 MB/s) | |
| [ 1.910072] raid6: using intx1 recovery algorithm | |
| [ 1.910321] SCSI subsystem initialized | |
| [ 1.910467] usbcore: registered new interface driver usbfs | |
| [ 1.910501] usbcore: registered new interface driver hub | |
| [ 1.910554] usbcore: registered new device driver usb | |
| [ 1.910762] media: Linux media interface: v0.10 | |
| [ 1.910789] Linux video capture interface: v2.00 | |
| [ 1.910829] pps_core: LinuxPPS API ver. 1 registered | |
| [ 1.910837] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 1.910856] PTP clock support registered | |
| [ 1.910997] logo: logo_init | |
| [ 1.911038] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 1.911328] Bluetooth: Core ver 2.18 | |
| [ 1.911359] NET: Registered protocol family 31 | |
| [ 1.911367] Bluetooth: HCI device and connection manager initialized | |
| [ 1.911380] Bluetooth: HCI socket layer initialized | |
| [ 1.911393] Bluetooth: L2CAP socket layer initialized | |
| [ 1.911413] Bluetooth: SCO socket layer initialized | |
| [ 1.911426] NetLabel: Initializing | |
| [ 1.911433] NetLabel: domain hash size = 128 | |
| [ 1.911439] NetLabel: protocols = UNLABELED CIPSOv4 | |
| [ 1.911473] NetLabel: unlabeled traffic allowed by default | |
| [ 1.912097] Switched to clocksource Timer-E | |
| [ 1.915758] NET: Registered protocol family 2 | |
| [ 1.916207] TCP established hash table entries: 16384 (order: 5, 131072 bytes) | |
| [ 1.916299] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) | |
| [ 1.916471] TCP: Hash tables configured (established 16384 bind 16384) | |
| [ 1.916536] TCP: reno registered | |
| [ 1.916547] UDP hash table entries: 1024 (order: 3, 32768 bytes) | |
| [ 1.916583] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) | |
| [ 1.916741] NET: Registered protocol family 1 | |
| [ 1.916897] RPC: Registered named UNIX socket transport module. | |
| [ 1.916906] RPC: Registered udp transport module. | |
| [ 1.916914] RPC: Registered tcp transport module. | |
| [ 1.916922] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 1.917056] Unpacking initramfs... | |
| [ 2.256653] Freeing initrd memory: 10272K (ffffffc073520000 - ffffffc073f28000) | |
| [ 2.259914] kvm [1]: interrupt-controller@c4304000 IRQ25 | |
| [ 2.260085] kvm [1]: kvm_arch_timer: can't find DT node | |
| [ 2.260118] kvm [1]: error initializing Hyp mode: -19 | |
| [ 2.260517] futex hash table entries: 1024 (order: 5, 131072 bytes) | |
| [ 2.260587] audit: initializing netlink subsys (disabled) | |
| [ 2.260623] audit: type=2000 audit(2.250:1): initialized | |
| [ 2.260977] HugeTLB registered 2 MB page size, pre-allocated 0 pages | |
| [ 2.264561] VFS: Disk quotas dquot_6.5.2 | |
| [ 2.264680] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 2.266076] NFS: Registering the id_resolver key type | |
| [ 2.266109] Key type id_resolver registered | |
| [ 2.266116] Key type id_legacy registered | |
| [ 2.266128] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 2.266148] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled | |
| [ 2.266971] msgmni has been set to 3433 | |
| [ 2.267695] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) | |
| [ 2.267759] io scheduler noop registered (default) | |
| [ 2.267768] io scheduler deadline registered | |
| [ 2.267790] io scheduler cfq registered | |
| [ 2.268333] meson-rng c8834000.rng: hwrng registered | |
| [ 2.268403] [drm] Initialized drm 1.1.0 20060810 | |
| [ 2.268433] mali-utgard d00c0000.mali: max pp is 3 | |
| [ 2.268443] mali-utgard d00c0000.mali: min pp is 3 | |
| [ 2.268452] mali-utgard d00c0000.mali: min clk is 4 | |
| [ 2.268466] mali-utgard d00c0000.mali: hiu io source 0xffffff80000d2000 | |
| [ 2.268480] mali-utgard d00c0000.mali: hiu io source 0xffffff80000e8000 | |
| [ 2.268491] mali-utgard d00c0000.mali: num of pp used most of time 3 | |
| [ 2.268501] mali-utgard d00c0000.mali: clock dvfs table size is 6 | |
| [ 2.268511] mali-utgard d00c0000.mali: max clk set 4 | |
| [ 2.268519] mali-utgard d00c0000.mali: max clk is 4 | |
| [ 2.268529] mali-utgard d00c0000.mali: turbo clk set to 5 | |
| [ 2.268537] mali-utgard d00c0000.mali: turbo clk is 5 | |
| [ 2.268547] mali-utgard d00c0000.mali: default clk is 4 | |
| [ 2.268606] mali-utgard d00c0000.mali: ====================0==================== | |
| [ 2.268606] clk_freq= 125000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<30 120>, clk_sample=125 | |
| [ 2.268630] mali-utgard d00c0000.mali: ====================1==================== | |
| [ 2.268630] clk_freq= 285000000, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285 | |
| [ 2.268652] mali-utgard d00c0000.mali: ====================2==================== | |
| [ 2.268652] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400 | |
| [ 2.268675] mali-utgard d00c0000.mali: ====================3==================== | |
| [ 2.268675] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500 | |
| [ 2.268697] mali-utgard d00c0000.mali: ====================4==================== | |
| [ 2.268697] clk_freq= 666000000, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666 | |
| [ 2.268719] mali-utgard d00c0000.mali: ====================5==================== | |
| [ 2.268719] clk_freq= 792000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=792 | |
| [ 2.269944] gpu cooling register okay with err=0 | |
| [ 2.269983] gpu core cooling register okay with err=0 | |
| [ 2.270091] Mali: Mali device driver loaded | |
| [ 2.270206] UMP: UMP device driver loaded | |
| [ 2.272323] loop: module loaded | |
| [ 2.272837] mtdoops: mtd device (mtddev=name/number) must be supplied | |
| [ 2.280016] libphy: stmmac: probed | |
| [ 2.280038] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active | |
| [ 2.280047] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07) | |
| [ 2.280323] usbcore: registered new interface driver cdc_ether | |
| [ 2.280377] usbcore: registered new interface driver cdc_ncm | |
| [ 2.280469] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 2.280479] ehci-h20ahb: H20AHB-EHCI Host Controller driver | |
| [ 2.280552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 2.280606] usbcore: registered new interface driver cdc_acm | |
| [ 2.280615] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters | |
| [ 2.280657] usbcore: registered new interface driver usb-storage | |
| [ 2.280683] usbcore: registered new interface driver ums-cypress | |
| [ 2.280710] usbcore: registered new interface driver ums_eneub6250 | |
| [ 2.280794] usbcore: registered new interface driver usbserial | |
| [ 2.280821] usbcore: registered new interface driver usbserial_generic | |
| [ 2.280846] usbserial: USB Serial support registered for generic | |
| [ 2.281125] mousedev: PS/2 mouse device common for all mice | |
| [ 2.281349] i2c /dev entries driver | |
| [ 2.281837] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 2.281883] hidraw: raw HID events driver (C) Jiri Kosina | |
| [ 2.281999] usbcore: registered new interface driver usbhid | |
| [ 2.282007] usbhid: USB HID core driver | |
| [ 2.282193] ==uart0 reg addr = ffffff80002244c0 | |
| [ 2.282218] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart | |
| [ 4.067202] console [ttyS0] enabled | |
| [ 4.070808] ==uart1 reg addr = ffffff80002264c0 | |
| [ 4.075147] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart | |
| [ 4.084457] enter cpufreq | |
| [ 4.086956] probe cpufreq okay | |
| [ 4.090157] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 1536000000 | |
| [ 4.137632] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0 | |
| [ 4.143112] dwc_otg: Core Release: 3.10a | |
| [ 4.144371] dwc_otg: Setting default values for core params | |
| [ 4.149897] dwc_otg: curmode: 1, host_only: 1 | |
| [ 4.156399] dwc_otg: Using Buffer DMA mode | |
| [ 4.158257] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 | |
| [ 4.163351] dwc_otg: Working on port type = HOST | |
| [ 4.168018] dwc_otg dwc2_b: DWC OTG Controller | |
| [ 4.172333] dwc_otg dwc2_b: new USB bus registered, assigned bus number 1 | |
| [ 4.179055] dwc_otg dwc2_b: irq 63, io mem 0x00000000 | |
| [ 4.184053] dwc_otg: -------hcd->flags.d32 = 0 | |
| [ 4.188458] dwc_otg: Init: Port Power? op_state=1 | |
| [ 4.193107] dwc_otg: Init1: Power Port (0) | |
| [ 4.197560] hub 1-0:1.0: USB hub found | |
| [ 4.200878] hub 1-0:1.0: 1 port detected | |
| [ 4.204905] dwc_otg: usb0: type: 0 speed: 0, config: 0, dma: 0, id: 0, phy: c0000000, ctrl: 0 | |
| [ 4.225772] dwc_otg: Core Release: 3.10a | |
| [ 4.225793] dwc_otg: Setting default values for core params | |
| [ 4.229580] dwc_otg: curmode: 1, host_only: 0 | |
| [ 4.238068] dwc_otg: Using Buffer DMA mode | |
| [ 4.238089] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 | |
| [ 4.243038] dwc_otg: Working on port type = OTG | |
| [ 4.247515] dwc_otg: Current port type: SLAVE | |
| [ 4.251895] dwc_otg dwc2_a: DWC OTG Controller | |
| [ 4.256243] dwc_otg dwc2_a: new USB bus registered, assigned bus number 2 | |
| [ 4.262972] dwc_otg dwc2_a: irq 62, io mem 0x00000000 | |
| [ 4.268265] hub 2-0:1.0: USB hub found | |
| [ 4.271678] hub 2-0:1.0: 1 port detected | |
| [ 4.275659] dwc_otg: Dedicated Tx FIFOs mode | |
| [ 4.279926] dwc_otg: using timer detectid change, ffffffc073842000 | |
| [ 4.286134] BLASTER Driver Init | |
| [ 4.289109] secmon has 1 memory regions | |
| [ 4.292828] secmon: share in base: 0xffffff8000234000, share out base: 0xffffff8000236000 | |
| [ 4.300907] secmon secmon: assigned reserved memory node linux,secmon ok | |
| [ 4.307596] secmon: probe done | |
| [ 4.310653] storage: storage in base: 0xffffff8001780000 | |
| [ 4.315833] storage: storage out base: 0xffffff8001800000 | |
| [ 4.321173] storage: storage block base: 0xffffff8001880000 | |
| [ 4.326698] storage: probe done! | |
| [ 4.330418] aml_sd_emmc_probe: line 2898 | |
| [ 4.333774] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error | |
| [ 4.343294] aml_sd_emmc_reg_init 621 | |
| [ 4.346590] pdata->caps 60007 | |
| [ 4.349465] pdata->caps2 0 | |
| [ 4.352146] get property: ocr_avail, value:0x00200080 | |
| [ 4.358434] get property: f_min, value:0x00061a80 | |
| [ 4.364736] get property: f_max, value:0x0510ff40 | |
| [ 4.371027] get property: max_req_size, value:0x00020000 | |
| [ 4.377357] get property: irq_in, value:0x00000003 | |
| [ 4.383626] get property: irq_out, value:0x00000005 | |
| [ 4.389915] get property: power_level, value:0x00000001 | |
| [ 4.396224] get property: gpio_cd, str: | |
| [ 4.401475] get property: gpio_power, str: | |
| [ 4.406750] get property: pinname, str:sd | |
| [ 4.406788] dwc_otg: Indeed it is in host mode hprt0 = 00021501 | |
| [ 4.418041] get property: jtag_pin, str: | |
| [ 4.423300] get property: card_type, value:0x00000005 | |
| [ 4.429591] get property: gpio_dat3, str: | |
| [ 4.434861] get property: gpio_volsw, str: | |
| [ 4.512184] [aml_is_card_insert] card IN | |
| [ 4.563261] normal card in | |
| [ 4.563333] [aml_sd_emmc_probe] aml_sd_emmc_probe() success! | |
| [ 4.566132] aml_sd_emmc_probe: line 2898 | |
| [ 4.570360] aml_sd_emmc_reg_init 621 | |
| [ 4.573601] pdata->caps 80000d47 | |
| [ 4.576729] pdata->caps2 80a1 | |
| [ 4.579659] get property: ocr_avail, value:0x00200080 | |
| [ 4.582127] usb 1-1: new high-speed USB device number 2 using dwc_otg | |
| [ 4.582390] dwc_otg: Indeed it is in host mode hprt0 = 00001101 | |
| [ 4.598209] [aml_is_card_insert] card IN | |
| [ 4.598209] | |
| [ 4.598210] get property: f_min, value:0x00061a80 | |
| [ 4.611057] get property: f_max, value:0x05f5e100 | |
| [ 4.617354] get property: max_req_size, value:0x00020000 | |
| [ 4.623653] get property: pinname, str:emmc | |
| [ 4.629251] get property: card_type, value:0x00000001 | |
| [ 4.635555] get property: gpio_dat3, str: | |
| [ 4.640809] get property: hw_reset, str: | |
| [ 4.702107] [aml_sd_emmc_probe] aml_sd_emmc_probe() success! | |
| [ 4.702109] aml_emmc_hw_reset 1356 | |
| [ 4.705639] ion_dev has 1 memory regions | |
| [ 4.714261] [aml_sd_emmc_irq] emmc: resp_timeout,vstat:0x2800,virqc:3fff | |
| [ 4.717226] aml_sd_emmc_data_thread 2155 emmc: cmd:1 | |
| [ 4.722341] emmc: error -110 whilst initialising MMC card | |
| [ 4.722454] fb: osd_init_module | |
| [ 4.722532] fb: viu vsync irq: 35 | |
| [ 4.722537] meson-fb has 1 memory regions | |
| [ 4.723881] meson-fb meson-fb: assigned reserved memory node linux,meson-fb ok | |
| [ 4.723894] tv_vout: tv_set_current_vmode[696]fps_target_mode=12 | |
| [ 4.723898] tv_vout: mode is 12,sync_duration_den=1,sync_duration_num=60 | |
| [ 4.723906] switch_vpu_mem_pd: vencp ON | |
| [ 4.723911] tv_vout: TV mode 1080p60hz selected. | |
| [ 4.723919] tv_vout: new mode =1080p60hz set ok | |
| [ 4.723921] vout_serve: vinfo mode is: 1080p60hz | |
| [ 4.723927] switch_vpu_mem_pd: viu_osd1 ON | |
| [ 4.723929] switch_vpu_mem_pd: viu_osd2 ON | |
| [ 4.723931] switch_vpu_mem_pd: viu_osd_scale ON | |
| [ 4.724088] osd_rdma: osd_rdma_init: rmda_table p=0x5d849000,op=0x5d849000 , v=0xffffff800027b000 | |
| [ 4.724112] hdmitx: video: get current mode: 1080p60hz | |
| [ 4.724122] hdmitx: video: get current mode: 1080p60hz | |
| [ 4.724129] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16 | |
| [ 4.724165] hdmitx: system: change to DVI mode | |
| [ 4.724168] fb: osd_probe vinfo:ffffffc001d1e4d0 | |
| [ 4.724174] fb: Frame buffer memory assigned at | |
| [ 4.724174] fb: phy: 0x78000000, vir:0xffffff8003c00000, size=98304K | |
| [ 4.724179] fb: osd_set_res_bootargs : mode 12 | |
| [ 4.724182] fb: fb def : 1920 1080 1920 2160 32 | |
| [ 4.724183] fb: init fbdev bpp is:32 | |
| [ 4.724184] fb: ---------------clear fb0 memory | |
| [ 4.833873] hub 1-1:1.0: USB hub found | |
| [ 4.834155] hub 1-1:1.0: 4 ports detected | |
| [ 4.858014] fb: osd[0] canvas.idx =0x40 | |
| [ 4.858016] fb: osd[0] canvas.addr=0x78000000 | |
| [ 4.858017] fb: osd[0] canvas.width=7680 | |
| [ 4.858019] fb: osd[0] canvas.height=2160 | |
| [ 4.884784] Console: switching to colour frame buffer device 240x67 | |
| [ 4.932259] fb: Frame buffer memory assigned at | |
| [ 4.932341] fb: phy: 0x7e000000, vir:0xffffff8001a00000, size=1024K | |
| [ 4.948863] fb: osd probe OK | |
| [ 4.949023] vout_serve: vout_init_module | |
| [ 4.950110] vout_serve: meson_vout_probe | |
| [ 4.953948] vout_serve: create vout attribute OK | |
| [ 4.958541] ge2d: ge2d_init_module | |
| [ 4.961867] ge2d: ge2d_dev major:241 | |
| [ 4.965531] ge2d: ge2d clock is 400 MHZ | |
| [ 4.969189] ge2d: ge2d: pdev=ffffffc05b229400, irq=182, rstc=0xffffffc073882c80, clk=ffffffc05b140c00 | |
| [ 4.978363] ge2d: mapped phy: 0xd0160000 | |
| [ 4.982220] ge2d: ge2d start monitor | |
| [ 4.985815] ge2d: ge2d workqueue monitor start | |
| [ 4.985886] codec:Amlogic A/V streaming port init | |
| [ 4.986467] codec:get gate demux control ok ffffffc07388b180 | |
| [ 4.986470] codec:get gate parser_top control ok ffffffc07388b280 | |
| [ 4.986475] codec:get gate vpu_intr control ok ffffffc07388b380 | |
| [ 4.986480] codec:get gate vdec control ok ffffffc07388b480 | |
| [ 4.986632] codec:[tsync_pcr_init]init success. | |
| [ 4.986664] codec:regist mpeg12 codec profile | |
| [ 4.986696] codec:regist mpeg4 codec profile | |
| [ 4.986697] codec:amvdec_vc1 module init | |
| [ 4.986726] codec:regist vc1 codec profile | |
| [ 4.986727] codec:amvdec_h264 module init | |
| [ 4.986776] codec:regist h264 codec profile | |
| [ 4.986777] codec:amvdec_h264mvc module init | |
| [ 4.986809] codec:regist hmvc codec profile | |
| [ 4.986810] codec:amvdec_h264_4k2k module init | |
| [ 4.986840] codec:regist h264_4k2k codec profile | |
| [ 4.986842] codec:amvdec_h265 module init | |
| [ 4.986876] codec:regist hevc codec profile | |
| [ 4.986906] codec:regist mjpeg codec profile | |
| [ 4.986907] codec:amvdec_real module init | |
| [ 4.986935] codec:regist real codec profile | |
| [ 4.986937] codec:amvdec_avs module init | |
| [ 4.986965] codec:regist avs codec profile | |
| [ 4.987003] amvenc_avc_probe -- reserved memory config fail. | |
| [ 4.987005] amvenc_avc - cma memory pool size: 40 MB | |
| [ 4.987023] encode_wq_init. | |
| [ 4.987027] encode start monitor. | |
| [ 4.987086] encode workqueue monitor start. | |
| [ 4.987182] jpegenc module init | |
| [ 4.987219] jpegenc probe start. | |
| [ 4.987222] jpegenc has 1 memory regions | |
| [ 4.987255] jpegenc jpegenc: assigned reserved memory node linux,jpegenc_cma ok | |
| [ 4.987257] jpegenc - cma memory pool size: 36 MB | |
| [ 4.987266] jpegenc memory config sucess, buff size is 0x2400000, level: 8M | |
| [ 4.987267] jpegenc_wq_init. | |
| [ 4.987320] jpegenc probe end. | |
| [ 4.987382] codec:picdec_driver_probe called. | |
| [ 4.987384] picdec has 1 memory regions | |
| [ 4.987390] picdec picdec: assigned reserved memory node linux,picdec ok | |
| [ 4.987392] codec:picdec_driver_probe done. | |
| [ 4.987393] codec:reserved memory config fail , use CMA . | |
| [ 4.990883] codec:cma memory is 64800000 , size is 3000000 | |
| [ 4.991187] codec:0 addr is 64800000################ | |
| [ 4.991195] codec:1 addr is 64afd000################ | |
| [ 4.991336] switch_vpu_mem_pd: vpu_arb ON | |
| [ 4.991553] codec:create_ge2d_work_queue video task ok | |
| [ 4.991828] codec:register clk_set_setting cpu[31] | |
| [ 4.992199] di_module_init ok. | |
| [ 4.992205] di_module_init: major 236 | |
| [ 4.992374] di_probe | |
| [ 4.992470] deinterlace has 1 memory regions | |
| [ 4.992504] di reveser memory 0x76200000, size 30MB. | |
| [ 4.992513] deinterlace deinterlace: assigned reserved memory node linux,di ok | |
| [ 4.992661] rdma_register, rdma_table_addr ffffff800027d000 rdma_table_addr_phy 5d84e000 reg_buf ffffffc073896000 | |
| [ 4.992664] rdma_register success, handle 1 table_size 8192 | |
| [ 4.992665] di_probe allocate rdma channel 1. | |
| [ 4.992669] DI hw version 2. | |
| [ 4.992677] 0x000000c3:Y=c3,U=0,V=0 | |
| [ 4.992679] 0x000000c4:Y=c4,U=0,V=0 | |
| [ 4.992680] 0x000000c5:Y=c5,U=0,V=0 | |
| [ 4.992682] 0x000000c6:Y=c6,U=0,V=0 | |
| [ 4.992684] 0x000000c7:Y=c7,U=0,V=0 | |
| [ 4.992685] 0x000000c8:Y=c8,U=0,V=0 | |
| [ 4.992687] 0x000000c9:Y=c9,U=0,V=0 | |
| [ 4.992690] 0x000000ca:Y=ca,U=0,V=0 | |
| [ 4.992691] 0x000000cb:Y=cb,U=0,V=0 | |
| [ 4.992693] 0x000000cc:Y=cc,U=0,V=0 | |
| [ 4.992696] 0x000000cd:Y=cd,U=0,V=0 | |
| [ 4.992697] 0x000000ce:Y=ce,U=0,V=0 | |
| [ 4.992699] 0x000000cf:Y=cf,U=0,V=0 | |
| [ 4.992833] di_probe here. | |
| [ 4.992850] switch_vpu_mem_pd: di_pre OFF | |
| [ 4.993035] efusekeynum: 4 | |
| [ 4.993042] efusekeyname: mac offset: 0 size: 6 | |
| [ 4.993048] efusekeyname: mac_bt offset: 6 size: 6 | |
| [ 4.993054] efusekeyname: mac_wifi offset: 12 size: 6 | |
| [ 4.993059] efusekeyname: usid offset: 18 size: 16 | |
| [ 4.993139] efuse efuse: probe OK! | |
| [ 4.993253] 6aml_unifykeys_init done! | |
| [ 4.993254] ppmgr module init func called | |
| [ 4.993292] ppmgr_driver_probe called | |
| [ 4.993294] ppmgr has 1 memory regions | |
| [ 4.993303] init ppmgr memsource 74200000->761fffff | |
| [ 4.993414] ppmgr_probe done | |
| [ 4.993613] ionvideo-000: V4L2 device registered as video13 | |
| [ 4.993618] [dsp]register dsp to char divece(257) | |
| [ 4.993858] amaudio: driver amaudio succuess! | |
| [ 4.993863] amlvideo_init called | |
| [ 4.993863] amlvideo_create_instance called | |
| [ 4.993865] v4l2_dev.name=:amlvideo-000 | |
| [ 4.993917] amlvideo-000: V4L2 device registered as video10 | |
| [ 4.993919] | |
| [ 4.993919] | |
| [ 4.993919] VECM init | |
| [ 4.993919] | |
| [ 4.994169] saradc c1108680.saradc: initialized by BL30 | |
| [ 4.994173] saradc c1108680.saradc: calibration start: | |
| [ 4.994220] saradc c1108680.saradc: nominal=0, value=10 | |
| [ 4.994264] saradc c1108680.saradc: nominal=256, value=259 | |
| [ 4.994309] saradc c1108680.saradc: nominal=512, value=510 | |
| [ 4.994355] saradc c1108680.saradc: nominal=768, value=766 | |
| [ 4.994400] saradc c1108680.saradc: nominal=1023, value=1016 | |
| [ 4.994403] saradc c1108680.saradc: calibration end: coef=4136 | |
| [ 4.994442] remote: Driver init | |
| [ 4.994609] gpio_key- gpio_key_probe | |
| [ 4.994623] gpio-key c8100000.gpio_keypad: gpio_key: find key_name=0 fail | |
| [ 4.994636] gpio-key: probe of c8100000.gpio_keypad failed with error -22 | |
| [ 4.994823] aml-thermal aml-sensor@0: min state:500000 400 1 2 | |
| [ 4.995013] aml-thermal aml-sensor@0: not found gpucore node | |
| [ 4.995021] aml-thermal aml-sensor@0: gpu coef:437, pp:3 | |
| [ 5.000069] aml-thermal aml-sensor@0: cdev1 set upper to 3 | |
| [ 5.000072] aml-thermal aml-sensor@0: cdev2 set upper to 3 | |
| [ 5.000075] aml-thermal aml-sensor@0: cdev0 set upper to 3 | |
| [ 5.002970] input: cec_input as /devices/virtual/input/input0 | |
| [ 5.003194] cectx c810023c.aocec: aml_cec_probe(): can't find hdmirx | |
| [ 5.004007] 6-------------------------------------------------------- | |
| [ 5.004009] 6odroid_sysfs_init(321) : Sleep Enable !! | |
| [ 5.004010] 6-------------------------------------------------------- | |
| [ 5.004138] input: vt-input as /devices/virtual/input/input1 | |
| [ 5.006431] 6Virtual-Key input driver registered!! | |
| [ 5.006826] adbattery: android dummy battery driver loaded | |
| [ 5.007214] enter aml_soc_platform_pcm2bt_probe | |
| [ 5.007446] divider=16,frac=33920000,SDMval=4523 | |
| [ 5.007555] enter aml_pcm_dai_probe | |
| [ 5.007593] [aml-spdif-dai]enter aml_dai_spdif_init | |
| [ 5.007641] aml_spdif_probe | |
| [ 5.007731] enter spdif_dit_probe | |
| [ 5.008365] odroid_hdmi_snd odroid_hdmi: dit-hifi <-> I2S mapping ok | |
| [ 5.008996] GACT probability on | |
| [ 5.009006] Mirror/redirect action on | |
| [ 5.009007] u32 classifier | |
| [ 5.009009] Performance counters on | |
| [ 5.009010] input device check on | |
| [ 5.009011] Actions configured | |
| [ 5.009106] TCP: cubic registered | |
| [ 5.009439] NET: Registered protocol family 10 | |
| [ 5.010104] mip6: Mobile IPv6 | |
| [ 5.010108] NET: Registered protocol family 17 | |
| [ 5.010123] NET: Registered protocol family 15 | |
| [ 5.010159] Bridge firewalling registered | |
| [ 5.010233] Bluetooth: RFCOMM TTY layer initialized | |
| [ 5.010242] Bluetooth: RFCOMM socket layer initialized | |
| [ 5.010270] Bluetooth: RFCOMM ver 1.11 | |
| [ 5.010276] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
| [ 5.010278] Bluetooth: BNEP filters: protocol multicast | |
| [ 5.010284] Bluetooth: BNEP socket layer initialized | |
| [ 5.010286] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 | |
| [ 5.010292] Bluetooth: HIDP socket layer initialized | |
| [ 5.010337] NET: Registered protocol family 35 | |
| [ 5.010384] Key type dns_resolver registered | |
| [ 5.010928] Registering SWP/SWPB emulation handler | |
| [ 5.011207] registered taskstats version 1 | |
| [ 5.011792] bio: create slab <bio-1> at 1 | |
| [ 5.012307] Btrfs loaded | |
| [ 5.012370] regulator-dummy: disabling | |
| [ 5.012703] Mali DRM initialize, driver name: mali_drm, version 2.1 | |
| [ 5.012870] [drm] Initialized mali_drm 2.1.1 20140306 on minor 0 | |
| [ 5.012880] Mali DRM initialize, driver name: mali_drm, version 2.1 | |
| [ 5.012966] [drm] Initialized mali_drm 2.1.1 20140306 on minor 1 | |
| [ 5.013067] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) | |
| [ 5.014009] 6enter meson_pm_probe! | |
| [ 5.014067] meson_pm_probe done | |
| [ 5.014283] ALSA device list: | |
| [ 5.014285] #0: ODROID-HDMI | |
| [ 5.715712] random: nonblocking pool is initialized | |
| [ 5.727438] Freeing unused kernel memory: 584K (ffffffc001c14000 - ffffffc Ù000) | |
| [ 5.792762] sd: clk 83333333 SDR mode tuning start | |
| [ 5.797094] rx_tuning_result[0][0] = 10 | |
| [ 5.797856] rx_tuning_result[0][1] = 10 | |
| [ 5.798614] rx_tuning_result[0][2] = 10 | |
| [ 5.799376] rx_tuning_result[0][3] = 10 | |
| [ 5.800135] rx_tuning_result[0][4] = 10 | |
| [ 5.800898] rx_tuning_result[0][5] = 10 | |
| [ 5.801657] rx_tuning_result[0][6] = 10 | |
| [ 5.802491] rx_tuning_result[0][7] = 10 | |
| [ 5.803252] rx_tuning_result[0][8] = 10 | |
| [ 5.804015] rx_tuning_result[0][9] = 10 | |
| [ 5.804851] rx_tuning_result[0][11] = 10 | |
| [ 5.804853] best_win_start =11, best_win_size =11 | |
| [ 5.804855] sd_emmc_regs->gclock =0x100024c, sd_emmc_regs->gadjust =0x42000 | |
| [ 5.804860] sd: gclock =0x100024c, gdelay=0x0 | |
| [ 5.804861] gadjust=0x42000 | |
| [ 5.804869] sd: new ultra high speed SDR104 SDHC card at address 59b4 | |
| [ 5.805160] sd: clock 83333333, 4-bit-bus-width | |
| [ 5.805160] | |
| [ 5.805161] mmcblk0: sd:59b4 00000 29.8 GiB | |
| [ 5.806118] mmcblk0: p1 p2 | |
| [ 5.896878] device-mapper: uevent: version 1.0.3 | |
| [ 5.900315] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com | |
| [ 6.477926] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) | |
| [ 6.648870] switch_vpu_mem_pd: viu_vd1 OFF | |
| [ 6.652200] switch_vpu_mem_pd: afbc_dec OFF | |
| [ 6.655404] switch_vpu_mem_pd: di_post OFF | |
| [ 6.658833] switch_vpu_mem_pd: viu_vd2 OFF | |
| [ 6.862167] systemd[1]: System time before build time, advancing clock. | |
| [ 6.910015] ip_tables: (C) 2000-2006 Netfilter Core Team | |
| [ 6.945182] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) | |
| [ 6.964118] systemd[1]: Detected architecture arm64. | |
| [ 6.981327] systemd[1]: Set hostname to <alarm>. | |
| [ 7.312905] systemd[1]: Unnecessary job for dev-mapper-lvm.device was removed. | |
| [ 7.321656] systemd[1]: Reached target Swap. | |
| [ 7.329452] systemd[1]: Listening on Device-mapper event daemon FIFOs. | |
| [ 7.338763] systemd[1]: Created slice User and Session Slice. | |
| [ 7.346745] systemd[1]: Listening on udev Kernel Socket. | |
| [ 7.354758] systemd[1]: Reached target Remote File Systems. | |
| [ 7.363166] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [ 7.374201] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
| [ 7.387233] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [ 7.396829] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| [ 7.408473] systemd[1]: Reached target Paths. | |
| [ 7.417883] systemd[1]: Listening on LVM2 metadata daemon socket. | |
| [ 7.427927] systemd[1]: Listening on Journal Socket. | |
| [ 7.437688] systemd[1]: Listening on udev Control Socket. | |
| [ 7.447600] systemd[1]: Listening on Network Service Netlink Socket. | |
| [ 7.461810] systemd[1]: Listening on Process Core Dump Socket. | |
| [ 7.472834] systemd[1]: Created slice System Slice. | |
| [ 7.484905] systemd[1]: Mounting POSIX Message Queue File System... | |
| [ 7.503600] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. | |
| [ 7.519955] systemd[1]: Mounting Temporary Directory (/tmp)... | |
| [ 7.532978] systemd[1]: Starting Create list of required static device nodes for the current kernel... | |
| [ 7.550514] systemd[1]: Mounting Huge Pages File System... | |
| [ 7.563225] systemd[1]: Created slice system-serial\x2dgetty.slice. | |
| [ 7.574802] systemd[1]: Reached target Slices. | |
| [ 7.587370] systemd[1]: Starting Apply Kernel Variables... | |
| [ 7.600355] systemd[1]: Mounting Kernel Debug File System... | |
| [ 7.613719] systemd[1]: Starting Remount Root and Kernel File Systems... | |
| [ 7.628580] systemd[1]: Starting Journal Service... | |
| [ 7.663511] systemd[1]: Mounting Kernel Configuration File System... | |
| [ 7.676028] systemd[1]: Created slice system-getty.slice. | |
| [ 7.686722] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. | |
| [ 7.702081] systemd[1]: Mounted Temporary Directory (/tmp). | |
| [ 7.712825] systemd[1]: Mounted Kernel Debug File System. | |
| [ 7.723314] systemd[1]: Mounted Kernel Configuration File System. | |
| [ 7.723483] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro,discard | |
| [ 7.741631] systemd[1]: Mounted POSIX Message Queue File System. | |
| [ 7.752823] systemd[1]: Mounted Huge Pages File System. | |
| [ 7.766285] systemd[1]: Started Create list of required static device nodes for the current kernel. | |
| [ 7.781952] systemd[1]: Started Apply Kernel Variables. | |
| [ 7.893271] systemd[1]: Started Remount Root and Kernel File Systems. | |
| [ 7.905303] systemd[1]: Started Journal Service. | |
| [ 7.966022] systemd-journald[186]: Received request to flush runtime journal from PID 1 | |
| [ 7.985373] systemd-journald[186]: File /var/log/journal/00c8e4bbf3c446e8a481e28bb43160e5/system.journal corrupted or uncleanly shut down, renaming and replacing. | |
| [ 9.123310] gpiomem-meson c8834000.gpiomem: Initialised: Registers at 0xc8834000 | |
| [ 9.136089] Driver for 1-wire Dallas network protocol. | |
| [ 9.227048] ionvideo open | |
| [ 9.422135] ionvideo_stop_generating!!!! | |
| [ 9.432611] ionvideo release | |
| Please enter passphrase for disk lvm! [ 9.553263] A link change request failed with some changes committed already. Interface eth0 may have been left with an inconsistent configuration, please check. | |
| [ 13.542353] libphy: stmmac-0:00 - Link is Up - 1000/Full | |
| ***[ 15.542354] libphy: stmmac-0:00 - Link is Down | |
| ***** | |
| [ 19.542356] libphy: stmmac-0:00 - Link is Up - 1000/Full | |
| [ 22.364176] NET: Registered protocol family 38 | |
| [ 23.049977] bio: create slab <bio-2> at 2 | |
| [ 23.521112] vout_serve: vmode set to 1080p60hz | |
| [ 23.521112] | |
| [ 23.529156] vout_serve: don't set the same mode as current. | |
| [ 23.569059] vout_serve: vmode set to 1080p60hz | |
| [ 23.569059] | |
| [ 23.577303] vout_serve: don't set the same mode as current. | |
| [ 23.586285] fb: osd0 free scale DISABLE | |
| [ 23.625495] bio: create slab <bio-3> at 3 | |
| Arch Linux 3.14.79-27-ARCH (ttyS0) | |
| alarm login: [ 29.542354] libphy: stmmac-0:00 - Link is Down | |
| [ 31.542352] libphy: stmmac-0:00 - Link is Up - 1000/Full | |
| [ 33.542351] libphy: stmmac-0:00 - Link is Down | |
| [ 36.542357] libphy: stmmac-0:00 - Link is Up - 1000/Full | |
| [ 44.542348] libphy: stmmac-0:00 - Link is Down | |
| [ 46.542352] libphy: stmmac-0:00 - Link is Up - 1000/Full | |
| [ 52.542349] libphy: stmmac-0:00 - Link is Down | |
| [ 58.542359] libphy: stmmac-0:00 - Link is Up - 1000/Full | |
| [ 60.542352] libphy: stmmac-0:00 - Link is Down |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment