Install fish shell on macOS Mojave with brew

fish_install.md

Installing Fish shell on MacOS (Intel and M1) using brew

Fish is a smart and user-friendly command line (like bash or zsh). This is how you can instal Fish on MacOS and make your default shell.

Note that you need the https://brew.sh/ package manager installed on your machine.

Install Fish

brew install fish

More info: https://fishshell.com/docs/current/tutorial.html#tut_path

Check the path

Check the fish path with which fish . In the examples below it was located at: /opt/homebrew/bin/fish On older Macs default path is /usr/local/bin/fish, replace accordingly in the instruction below.

Make fish the default shell

MacOS allow you to change your default Shell using comande line or GUI methodes https://support.apple.com/en-us/102360.

Using the terminal:

1. check the fish path with which fish. In the examples below it was located at: /opt/homebrew/bin/fish. On older Macs the path might differ.
2. chsh -s /opt/homebrew/bin/fish

Add brew binaries in fish path

run the command: fish_add_path /opt/homebrew/bin

Optionnal Configurations

Auto Completions

To collect command completions for all commands run:

fish_update_completions

Edit config.sh

I edited the ~/.config/fish/config.fish to have my terminal in english

set -x LANG en_US.UTF-8

Configure your shell

You can configure your shell by launching the web interface, run:

fish_config

Related documentation

• https://fishshell.com/docs/current/cmds/fish_add_path.html
• https://linux.die.net/man/1/chsh

@gagarine you should update the original post with the steps for M1 as well!! I think it will help newer devs. : )

in case anyone wants the complete guide for Apple Silicon (M1+) Macs:

Installing fish

brew install fish

https://fishshell.com

Fallback

To fall back to another shell for something, just type zsh or bash.
It will temporarily change the shell until you restart your terminal.
You can also type fish again to go back to fish.

Make fish the default

1. check the fish path with which fish. In the examples below it was located at: /opt/homebrew/bin/fish
   On older Macs these paths might differ.
2. Add fish to the know shells
   sudo sh -c 'echo /opt/homebrew/bin/fish >> /etc/shells'
3. Restart your terminal
4. Set fish as the default shell
   chsh -s /opt/homebrew/bin/fish
5. Restart your terminal and check if it launched with fish or not
6. Add brew binaries in fish path
   set -U fish_user_paths /opt/homebrew/bin/ $fish_user_paths

@mesqueeb I updated the gist based on your instruction. I'm not using brew anymore (still using MacPorts :) ), so I cannot test at the moment.

@gagarine what made you choose MacPorts over Homebrew? I'm curious :)

I answered the same question in one of the first post ;). But in short MacPorts is more stable and is well separated from the OS. The team is very nice too.

…

On 14 Nov 2021, at 13:00, Luca Ban ***@***.***> wrote: ***@***.*** commented on this gist. @gagarine what made you choose MacPorts over Homebrew? I'm curious :) — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android.

Can you explain the number 6 in more detail?
Where should I put set -U fish_user_paths /opt/homebrew/bin/ $fish_user_paths ?
I proceeded to step 5, but the brew input in the terminal is not working.

I think the / at the end of the path is unnecessary.

set -U fish_user_paths /opt/homebrew/bin/ $fish_user_paths
which fish #=> /opt/homebrew/bin//fish

set -U fish_user_paths /opt/homebrew/bin $fish_user_paths
which fish #=> /opt/homebrew/bin/fish

@usagizmo that right, I checked https://fishshell.com/docs/current/cmds/fish_add_path.html and / do not seem necessary.

Love it!! ❤️

@gagarine how can I make a PR towards this doc again?

You have a typo here:

This is how you can instal Fish on MacOS and make your defaul shell.

Should be:

This is how you can instal Fish on MacOS and make your default shell.

@mesqueeb you cannot on gist. But thanks I fixed the typo.

Saved me. Thank you!!! 🙏🏽

Thank you! This tutorial should be on the front page of homebrew/fish/macOS

Thanks for the /opt/homebrew/bin/fish path :)

I would recommend the following:

set -g fish_complete_path $fish_complete_path /opt/homebrew/share/fish/vendor_completions.d

since some homebrew packages will add completions there and fish doesn't look for completion in that folder by default

At 6th step:

Add brew binaries in fish path run the command: set -U fish_user_paths /opt/homebrew/bin $fish_user_paths

can be modified to include newer way of modifying Fish path as:

Add brew binaries in fish path run the command: fish_add_path /opt/homebrew/bin

You save my day, thx!

@dinko-pehar Awesome - this worked for me, for adding the Homebrew BIN path to my fish shell:

fish_add_path /opt/homebrew/bin

Is there also a current recommended command to setup command completions for fish/brew?

@victorhooi You can just use:

fish_update_completions

to collect command completions for all commands. Some are also collected from automatically when you install some package via brew because it provides fish completions.

---

You can read my blog how I set up Fish shell and converted ZSH config to Fish at https://pehar.dev/blog/from-zsh-to-fish/

The doc was updated from the suggestions in the various comments. Thanks to all!

@Nepoxx the fish installed with brew add /opt/homebrew/share/fish/vendor_completions.d for completion (if not, it's a bug that need to be reported to brew)

I'm setting up a new mac and confused about whether I used omf or fisher. Is this settled now?

Shouldn't we also have the following in ~/.config/fish/config.fish?

if status is-interactive
    eval "$(brew shellenv)"
end

Hi everyone, I get this error when I set fish as my default shell.

error: can not save history
warning-path: Unable to locate data directory derived from $HOME: '/Users/user/.local/share/fish'.
warning-path: The error was 'Permission denied'.
warning-path: Please set $HOME to a directory where you have write access.

Does anyone know why?

Thanks

EDIT  : fixed the problem, don't know why but ~/.local was created by root, so I deleted it and created again with my $USER

@phromaj I get that too:

Last login: Mon Feb 13 08:51:19 on ttys015
error: can not save universal variables or functions
warning-path: Unable to locate config directory derived from $HOME: '/Users/antonengelhardt/.config/fish'.
warning-path: The error was 'File exists'.
warning-path: Please set $HOME to a directory where you have write access.

mkdir: /completions: Read-only file system
mkdir: /conf.d: Read-only file system
mkdir: /functions: Read-only file system
warning: An error occurred while redirecting file '/config.fish'
open: Read-only file system
Welcome to fish, the friendly interactive shell
Type help for instructions on how to use fis

Just fixed it lol.

I used symlinks pointing from my dotfiles directory to the .config/fish... When i moved the fish folder back it solved it

in case anyone wants the complete guide for Apple Silicon (M1+) Macs:

Installing fish

brew install fish

https://fishshell.com

Fallback

To fall back to another shell for something, just type zsh or bash. It will temporarily change the shell until you restart your terminal. You can also type fish again to go back to fish.

Make fish the default

1. check the fish path with which fish. In the examples below it was located at: /opt/homebrew/bin/fish
   On older Macs these paths might differ.
2. Add fish to the know shells
   sudo sh -c 'echo /opt/homebrew/bin/fish >> /etc/shells'
3. Restart your terminal
4. Set fish as the default shell
   chsh -s /opt/homebrew/bin/fish
5. Restart your terminal and check if it launched with fish or not
6. Add brew binaries in fish path
   set -U fish_user_paths /opt/homebrew/bin/ $fish_user_paths

thats working ,thanks bro

in case anyone wants the complete guide for Apple Silicon (M1+) Macs:

Installing fish

brew install fish

https://fishshell.com

Fallback

To fall back to another shell for something, just type zsh or bash. It will temporarily change the shell until you restart your terminal. You can also type fish again to go back to fish.

Make fish the default

1. check the fish path with which fish. In the examples below it was located at: /opt/homebrew/bin/fish
   On older Macs these paths might differ.
2. Add fish to the know shells
   sudo sh -c 'echo /opt/homebrew/bin/fish >> /etc/shells'
3. Restart your terminal
4. Set fish as the default shell
   chsh -s /opt/homebrew/bin/fish
5. Restart your terminal and check if it launched with fish or not
6. Add brew binaries in fish path
   set -U fish_user_paths /opt/homebrew/bin/ $fish_user_paths

For MacOs chip M1 (v13.4.1) it worked correctly 🤝

It works nicely - thank you!

Just a sanity check, in case you fail at step 4. Set fish as the default shell (as in, when you re-open Terminal and fish does not get launched automatically), please ensure that in your Terminal app > General > Shells open with, it has Default login shell as the value, instead of Command (complete path).

Worked perfect for me on M3, thanks

Thanks for sharing. It helped a lot.