Arduino Multi function shield - Potentiometer and led

Potentiometer and led

const byte LED[] = {13,12,11,10};
#define Pot1 0

void setup()
{
  Serial.begin(9600);
  // initialize the digital pin as an output.
  /* Set each pin to outputs */
  pinMode(LED[0], OUTPUT);
  pinMode(LED[1], OUTPUT);
  pinMode(LED[2], OUTPUT);
  pinMode(LED[3], OUTPUT);
}

/* Main Program */
void loop()
{
  int PotValue;
  //Serial.print(“Potentiometer reading: “);
  PotValue = analogRead(Pot1);
  /* Wait 0.5 seconds before reading again */
  if(PotValue < 400)
  {
    digitalWrite(LED[0], LOW);
    digitalWrite(LED[1], LOW);
    digitalWrite(LED[2], LOW);
    digitalWrite(LED[3], LOW);
    Serial.print(“Potentiometer: “);
    Serial.println(PotValue);
  }
  else
  {
    digitalWrite(LED[0], HIGH);
    digitalWrite(LED[1], HIGH);
    digitalWrite(LED[2], HIGH);
    digitalWrite(LED[3], HIGH);
    Serial.print(“Potentiometer: “);
    Serial.println(PotValue);
  }
  delay(500);
}