accessory.cpp

/*
 * This accessory.cpp is configurated for light accessory + fan accessory
 */

#include "Accessory.h"

#include "PHKAccessory.h"

//Global Level of light strength
int lightStength = 0;
int fanSpeedVal = 0;

void lightIdentify(bool oldValue, bool newValue) {
    printf("Start Identify Light\n");
}

void fanIdentify(bool oldValue, bool newValue) {
    printf("Start Identify Fan\n");
}

void changeLightIntensity(int oldValue, int newValue) {
    printf("New Intensity\n");
}





void changeLightPowerState(bool oldValue, bool newValue) {    
    if (newValue == true)
    {
        printf("Switching on Lamps...\n");
        system("curl -s \"http://gb160:password@127.0.0.1:8080/json.htm?type=command&param=switchlight&idx=8&switchcmd=On&level=0\" &");
    } else {
        printf("Switching off Lamps..a.\n");
        system("curl -s \"http://gb160:password@127.0.0.1:8080/json.htm?type=command&param=switchlight&idx=8&switchcmd=Off&level=0\" &");
    }
}



void changelight2PowerState(bool oldValue, bool newValue) {    
    if (newValue == true)
    {
        printf("Switching on Main Light...\n");
        system("curl -s \"http://gb160:password@127.0.0.1:8080/json.htm?type=command&param=switchlight&idx=7&switchcmd=On&level=0\" &");
    } else {
        printf("Switching off Main Light...\n");
        system("curl -s \"http://gb160:password@127.0.0.1:8080/json.htm?type=command&param=switchlight&idx=7&switchcmd=Off&level=0\"");
    }
}


void changelight3PowerState(bool oldValue, bool newValue) {    
    if (newValue == true)
    {
        printf("Switching on Bedroom Light...\n");
        system("curl -s \"http://gb160:password@127.0.0.1:8080/json.htm?type=command&param=switchlight&idx=9&switchcmd=On&level=0\" &");
    } else {
        printf("Switching off Bedroom Light...\n");
        system("curl -s \"http://gb160:password@127.0.0.1:8080/json.htm?type=command&param=switchlight&idx=9&switchcmd=Off&level=0\"");
    }
}

void changelight4PowerState(bool oldValue, bool newValue) {
    if (newValue == true)
    {
        printf("Switching on Xmas Light ...\n");
        system("curl -s \"http://gb160:password@127.0.0.1:8080/json.htm?type=command&param=switchlight&idx=35&switchcmd=On&level=0\" &");
    } else {
        printf("Switching off Xmas Light...\n");
        system("curl -s \"http://gb160:password@127.0.0.1:8080/json.htm?type=command&param=switchlight&idx=35&switchcmd=Off&level=0\"");
    }
}



void changefanPowerState(bool oldValue, bool newValue) {    
    if (newValue == true)
    {
        printf("Switching on Fan...\n");
    } else {
        printf("Switching off Fan...\n");
    }
}
    
void changeoutletPowerState(bool oldValue, bool newValue) {
    if (newValue == true)
    {
        printf("Switching on Fan...\n");
    } else {
        printf("Switching off Fan...\n");
    }
}




AccessorySet *accSet;

void initAccessorySet() {
    printf("Initial Accessory\n");
    
    Accessory *lightAcc = new Accessory();
    
    //Add Light
    accSet = new AccessorySet();
    addInfoServiceToAccessory(lightAcc, "Light 1", "ET", "Light", "12345678", &lightIdentify);
    accSet->addAccessory(lightAcc);
    
    Service *lightService = new Service(charType_lightBulb);
    lightAcc->addService(lightService);
    
    stringCharacteristics *lightServiceName = new stringCharacteristics(charType_serviceName, premission_read, 0);
    lightServiceName->setValue("Light");
    lightAcc->addCharacteristics(lightService, lightServiceName);
    
    boolCharacteristics *powerState = new boolCharacteristics(charType_on, premission_read|premission_write);
    powerState->setValue("true");
    powerState->valueChangeFunctionCall = &changeLightPowerState; 
    lightAcc->addCharacteristics(lightService, powerState);
    
    intCharacteristics *brightnessState = new intCharacteristics(charType_brightness, premission_read|premission_write, 0, 100, 1, unit_percentage);
    brightnessState->setValue("50");
    brightnessState->valueChangeFunctionCall = &changeLightIntensity;
    lightAcc->addCharacteristics(lightService, brightnessState);
   
    
    
    //Add light2
    Accessory *light2 = new Accessory();
    addInfoServiceToAccessory(light2, "Light 2", "ET", "light2", "12345678", &lightIdentify);
    accSet->addAccessory(light2);
    
    Service *light2Service = new Service(charType_lightBulb);
    light2->addService(light2Service);
    
    stringCharacteristics *light2ServiceName = new stringCharacteristics(charType_serviceName, premission_read, 0);
    light2ServiceName->setValue("light2");
    light2->addCharacteristics(light2Service, lightServiceName);
    
    boolCharacteristics *light2Power = new boolCharacteristics(charType_on, premission_read|premission_write);
    light2Power->setValue("true");
    light2Power->valueChangeFunctionCall = &changelight2PowerState; 
    light2->addCharacteristics(light2Service, light2Power);
    
    
    
    //Add light3
    Accessory *light3 = new Accessory();
    addInfoServiceToAccessory(light3, "Light 3", "ET", "light3", "12345678", &lightIdentify);
    accSet->addAccessory(light3);
    
    Service *light3Service = new Service(charType_lightBulb);
    light3->addService(light3Service);
    
    stringCharacteristics *light3ServiceName = new stringCharacteristics(charType_serviceName, premission_read, 0);
    light3ServiceName->setValue("light3");
    light3->addCharacteristics(light3Service, lightServiceName);
    
    boolCharacteristics *light3Power = new boolCharacteristics(charType_on, premission_read|premission_write);
    light3Power->setValue("true");
    light3Power->valueChangeFunctionCall = &changelight3PowerState; 
    light3->addCharacteristics(light3Service, light3Power);

    //Add light4
    Accessory *light4 = new Accessory();
    addInfoServiceToAccessory(light4, "Light 4", "ET", "light4", "12345678", &lightIdentify);
    accSet->addAccessory(light4);
    
    Service *light4Service = new Service(charType_lightBulb);
    light4->addService(light4Service);
    
    stringCharacteristics *light4ServiceName = new stringCharacteristics(charType_serviceName, premission_read, 0);
    light4ServiceName->setValue("light4");
    light4->addCharacteristics(light4Service, lightServiceName);
    
    boolCharacteristics *light4Power = new boolCharacteristics(charType_on, premission_read|premission_write);
    light4Power->setValue("true");
    light4Power->valueChangeFunctionCall = &changelight4PowerState;
    light4->addCharacteristics(light4Service, light4Power);
   
    
    //Add fan
    Accessory *fan = new Accessory();
    addInfoServiceToAccessory(fan, "Fan 1", "ET", "Fan", "12345678", &lightIdentify);
    accSet->addAccessory(fan);
    
    Service *fanService = new Service(charType_fan);
    fan->addService(fanService);
    
    stringCharacteristics *fanServiceName = new stringCharacteristics(charType_serviceName, premission_read, 0);
    fanServiceName->setValue("Fan");
    fan->addCharacteristics(fanService, lightServiceName);
    
    boolCharacteristics *fanPower = new boolCharacteristics(charType_on, premission_read|premission_write);
    fanPower->setValue("true");
    fanPower->valueChangeFunctionCall = &changefanPowerState;
    fan->addCharacteristics(fanService, fanPower);
   
 
    
    
    
    
};