gdamjan/0-README.md

## 0-README.md

      
    Raw
  

              0-README.md
            
          
    TODO - hack the kindle paperwhite

focus on the gen 2 / DP75SDI
compile kernel + initramfs with openwrt:

because it cross-compiles easily
has a reasonably simple user-space
device-tree?

CONFIG_PACKAGE_kmod-usb-gadget-serial

/dev/ttyGS0 - getty, no pass
ttyGS0::askfirst:/bin/ash --login in /etc/inittab

CONFIG_PACKAGE_kmod-usb-gadget-eth

usb0
https://openwrt.org/docs/guide-developer/uci-defaults#integrating_custom_settings

CONFIG_PACKAGE_kmod-usb-gadget-mass-storage

load on demand, a button, unmounts vfat storage from kindle
when host unmounts, should unload, mount vfat storage on kindle again
maybe better to use MTP or sshfs

FIND out:

device-tree
usb controller driver (arch/arm/configs/imx_v6_v7_defconfig already enables one)
find/port epdc driver mxc_epdc_fb https://github.com/boundarydevices/linux-imx6/tree/boundary-imx_4.14.x_2.0.0_ga/
find wifi driver (ath6kl)
find touchscreen driver (cyttsp4_i2c)
sensors (cover/lid, temp?)
battery status
backlight control
MAX77696


## hardware.md

      
    Raw
  

              hardware.md
            
          
Hardware        : Freescale i.MX 6SoloLite based Wario Board
1Ghz
256MB ram
2GB Flash (MMC_SDHCI_ESDHC_IMX)
Wifi: Atheros AR6803G-BL3B (ath6kl)
Cypress TTSP I2C Touchscreen Driver (cyttsp4_i2c)
MAX77696 PMIC, backlight, rtc, onekey, battery
USB


## hardware_dmesg.txt
[    0.000000] Linux version 3.0.35-lab126 (jenkins-official@sjc10-jbuild10) (collect2: ld returned 1 exit status) #1 Wed Apr 23 01:26:01 PDT 2014
[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Freescale i.MX 6SoloLite based Wario Board
[    0.000000] Will try to place printk log at 8fffc000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] CPU identified as i.MX6SoloLite, silicon rev 1.2
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat c04e0f2c, node_mem_map c2000000
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 8128 pages, LIFO batch:0
[    0.000000]   Normal zone: 448 pages used for memmap
[    0.000000]   Normal zone: 56896 pages, LIFO batch:15
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: rootwait log_pos_goal=0x8fffc000 console=ttymxc0,115200 root=/dev/mmcblk0p1 ro ip=off quiet video=mxcepdcfb:E60,bpp=8,x_mem=3M
[    0.000000] Prink buffer will be relocated to physical address: 8fff2000
[    0.000000] log_buf_len: 32768
[    0.000000] early log buf free: 31341(95%)
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 256MB = 256MB total
[    0.000000] Memory: 254640k/254640k available, 7504k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xfde00000 - 0xffe00000   (  32 MB)
[    0.000000]     vmalloc : 0xd0800000 - 0xf2000000   ( 536 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .init : 0xc0008000 - 0xc010c000   (1040 kB)
[    0.000000]       .text : 0xc010c000 - 0xc04ae000   (3720 kB)
[    0.000000]       .data : 0xc04ae000 - 0xc04e1a60   ( 207 kB)
[    0.000000]        .bss : 0xc04e1a84 - 0xc05072a0   ( 151 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:624
[    0.000000] MXC GPIO hardware
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] arm_max_freq=1GHz
[    0.000000] MXC_Early serial console at MMIO 0x2020000 (options '115200')
[    0.000000] bootconsole [ttymxc0] enabled
[    0.000000] Console: colour dummy device 80x30
[    0.000267] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
[    0.060113] pid_max: default: 32768 minimum: 301
[    0.060373] Mount-cache hash table entries: 512
[    0.060737] CPU: Testing write buffer coherency: ok
[    0.060874] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.067836] print_constraints: dummy:
[    0.068004] NET: Registered protocol family 16
[    0.072003] print_constraints: vddpu: 725 <--> 1300 mV at 700 mV fast normal
[    0.072299] print_constraints: vddcore: 725 <--> 1300 mV at 1475 mV fast normal
[    0.072599] print_constraints: vddsoc: 725 <--> 1300 mV at 1475 mV fast normal
[    0.072898] print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
[    0.073239] print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
[    0.073550] print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal
[    0.075128] LAB126 Board id - 02E2201140760UB3
[    0.079322] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.079335] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
[    0.079348] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.079366] L310 cache controller enabled
[    0.079377] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x02030000, Cache size: 262144 B
[    0.087821] bio: create slab <bio-0> at 0
[    0.091650] max77696> regulator init
[    0.092567] spi_imx imx6q-ecspi.0: probed
[    0.092933] usbcore: registered new interface driver usbfs
[    0.093051] usbcore: registered new interface driver hub
[    0.093189] usbcore: registered new device driver usb
[    0.095319] Reboot Reason - Metric Framework Reporting
[    0.095332] kernel: kernel_metric_generic,0,counter,event_recorder,ercflags,SFT_PRSTRT,1,
[    0.095341] Reboot Reason - Legacy Metric Reporting
[    0.095347]
[    0.098418] MAX77696 TOPSYS 1.0.0 Installed
[    0.101319] max77696-gpio max77696-gpio.0: gpio#0 -- -- func-0 in
[    0.102800] max77696-gpio max77696-gpio.0: gpio#1 -- -- func--1 in
[    0.104271] max77696-gpio max77696-gpio.0: gpio#3 -- -- func-0 in
[    0.106134] MAX77696 GPIO Driver 1.0.0 Installed
[    0.107072] buck mode: 4
[    0.107815] buck mode: 4
[    0.108764] print_constraints: max77696_buck1: 900 <--> 1300 mV at 1250 mV fast normal idle standby
[    0.109309] buck mode: 4
[    0.110318] print_constraints: max77696_buck1dvs: 600 <--> 1300 mV at 900 mV fast normal idle standby
[    0.110889] buck mode: 4
[    0.111631] buck mode: 4
[    0.112579] print_constraints: max77696_buck2: 900 <--> 1300 mV at 1200 mV fast normal idle standby
[    0.113102] buck mode: 4
[    0.114051] print_constraints: max77696_buck2dvs: 600 <--> 1300 mV at 900 mV fast normal idle standby
[    0.114586] print_constraints: max77696_buck3: 600 <--> 3387 mV at 1300 mV fast normal idle standby
[    0.115295] buck mode: 4
[    0.116034] buck mode: 4
[    0.116774] print_constraints: max77696_buck4: 1200 mV fast normal idle standby
[    0.117301] buck mode: 4
[    0.118251] print_constraints: max77696_buck5: 600 <--> 3387 mV at 1800 mV fast normal idle standby
[    0.118792] buck mode: 4
[    0.119741] print_constraints: max77696_buck6: 600 <--> 3387 mV at 3200 mV fast normal idle standby
[    0.119782] MAX77696 Buck Regulators Driver 1.0.1 Installed
[    0.120674] print_constraints: max77696_ldo1: 800 <--> 3950 mV at 3300 mV normal idle standby
[    0.121242] print_constraints: max77696_ldo2: 800 <--> 3950 mV at 3000 mV normal idle standby
[    0.121793] print_constraints: max77696_ldo3: 800 <--> 3950 mV at 2500 mV normal idle standby
[    0.122341] print_constraints: max77696_ldo4: 800 <--> 2375 mV at 1800 mV normal idle standby
[    0.122872] print_constraints: max77696_ldo5: 800 <--> 2375 mV at 1800 mV normal idle standby
[    0.123419] print_constraints: max77696_ldo6: 800 <--> 3950 mV at 3200 mV normal idle standby
[    0.123969] print_constraints: max77696_ldo7: 800 <--> 3950 mV at 3200 mV normal idle standby
[    0.124513] print_constraints: max77696_ldo8: 800 <--> 2375 mV at 1100 mV normal idle standby
[    0.125053] print_constraints: max77696_ldo9: 800 <--> 2375 mV at 1100 mV normal idle standby
[    0.125607] print_constraints: max77696_ldo10: 2400 <--> 5550 mV at 5200 mV normal idle standby
[    0.126399] MAX77696 Linear Regulators Driver 1.0.2 Installed
[    0.127015] print_constraints: max77696_lsw1:
[    0.127352] print_constraints: max77696_lsw2:
[    0.127679] print_constraints: max77696_lsw3:
[    0.127974] print_constraints: max77696_lsw4:
[    0.128018] MAX77696 Load Switches Driver 1.0.0 Installed
[    0.129232] print_constraints: max77696-display:
[    0.129964] print_constraints: max77696-vcom:
[    0.130514] print_constraints: max77696-vee:
[    0.130872] print_constraints: max77696-vneg:
[    0.131214] print_constraints: max77696-vpos:
[    0.131516] print_constraints: max77696-vddh:
[    0.132523]
[    0.132526] EPD vreg probe complete!
[    0.133122] print_constraints: max77696_vddq: 240 <--> 984 mV at 600 mV
[    0.133177] MAX77696 LPDDR2 Termination Supply Driver 1.0.1 Installed
[    0.134468] MAX77696 I2C Driver 1.0.0 Installed
[    0.137022] i2c-core: driver [max17135] using legacy suspend method
[    0.137033] i2c-core: driver [max17135] using legacy resume method
[    0.137066] Switching to clocksource mxc_timer1
[    0.147893] NET: Registered protocol family 2
[    0.147987] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.148174] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.148295] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    0.148354] TCP: Hash tables configured (established 8192 bind 8192)
[    0.148363] TCP reno registered
[    0.148371] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.148388] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.148727] NET: Registered protocol family 1
[    0.148902] RPC: Registered named UNIX socket transport module.
[    0.148912] RPC: Registered udp transport module.
[    0.148919] RPC: Registered tcp transport module.
[    0.148925] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.153037] etb: probe of etb failed with error -2
[    0.153292] etm: probe of etm.0 failed with error -2
[    0.153596] Static Power Management for Freescale i.MX6
[    0.153606] wait mode is enabled for i.MX6
[    0.153762] cpaddr = d0820000 suspend_iram_base=d081c000
[    0.153819] PM driver module loaded
[    0.154085] IMX usb wakeup probe
[    0.154107] the wakeup pdata is 0xce298080
[    0.154441] IMX usb wakeup probe
[    0.154458] the wakeup pdata is 0xce298200
[    0.154612] cpu regulator mode:ldo_bypass
[    0.155008] i.MXC CPU frequency driver
[    0.169238] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.170254] msgmni has been set to 497
[    0.170641] io scheduler noop registered
[    0.170721] io scheduler cfq registered (default)
[    0.171160] MAX77696 Backlight Driver 1.0.0 Installed
[    0.171921] imx-sdma imx-sdma: loaded firmware 1.1
[    0.176380] imx-sdma imx-sdma: initialized
[    0.178619] Serial: IMX driver
[    0.178734] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
[    0.178763] console [ttymxc0] enabled, bootconsole disabled
[    0.182490] loop: module loaded
[    0.182728] MAX77696 32kHz Oscillator Driver 1.0.0 Installed
[    0.183295] input: max77696-onkey as /devices/platform/imx-i2c.0/i2c-0/0-003c/max77696-onkey.0/input/input0
[    0.186483] MAX77696 ONKEY Driver 1.0.0 Installed
[    0.208507] max77696-rtc max77696-rtc.0: rtc core: registered max77696-rtc.0 as rtc0
[    0.228419] max77696-rtc max77696-rtc.0: rtc core: registered max77696-rtc.1 as rtc1
[    0.247727] MAX77696 RTC Driver 1.0.2 Installed
[    0.248436] snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc2
[    0.248590] i2c /dev entries driver
[    0.252587] max77696-battery max77696-battery.0: Voltage alert     3400mV ... 4260mV
[    0.253001] max77696-battery max77696-battery.0: SOC alert         (disabled)
[    0.253905] MAX77696 Fuel Gauge Driver 1.0.0 Installed
[    0.255787] MAX77696 USB Interface Circuit Driver 1.0.0 Installed
[    0.257568] max77696-adc max77696-adc.0: ADC average rate: 32 sample(s)
[    0.257580] max77696-adc max77696-adc.0: ADC delay: 0 nsec
[    0.257588] max77696-adc max77696-adc.0: ADC cur src: 50 uA
[    0.257600] MAX77696 ADC Driver 1.0.1 Installed
[    0.258090] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
[    0.258468] sdhci: Secure Digital Host Controller Interface driver
[    0.258476] sdhci: Copyright(c) Pierre Ossman
[    0.258582] mmc0: no vmmc regulator found
[    0.259860] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.1] using DMA
[    0.260929] mmc1: no vmmc regulator found
[    0.263304] mmc1: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA
[    0.264004] Registered led device: max77696-leds.0
[    0.264013] MAX77696 LED Driver #0 1.0.0 Installed
[    0.264204] Registered led device: max77696-leds.1
[    0.264213] MAX77696 LED Driver #1 1.0.0 Installed
[    0.264727] nf_conntrack version 0.5.0 (3978 buckets, 15912 max)
[    0.265453] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.265520] TCP cubic registered
[    0.265529] NET: Registered protocol family 17
[    0.265548] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.265678] LPDDR2 MfgId: 0x1 [Samsung]
[    0.269570]
[    0.269573] just text: vaddr 0xc011e9bc, va 0xc011e200 pa 0x801000c3 attr 0x6
[    0.278039]
[    0.278042] nmx6sl_wfi_iram: vaddr 0xd081a000, va 0xd081a200 pa 0x902043 attr 0x2
[    0.287014]
[    0.287017] mx6sl_ddr: vaddr 0xd0852000, va 0xd0852200 pa 0x903043 attr 0x2
[    0.295477]
[    0.295479] mx6sl_iomux: vaddr 0xf40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[    0.304372]
[    0.304374] ANATOP: vaddr 0xf40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[    0.312833]
[    0.312835] CCM: vaddr 0xf40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[    0.321032]
[    0.321034] MMDC_P0: vaddr 0xf41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[    0.329578]
[    0.329580] L2: vaddr 0xf2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[    0.337603]
[    0.337606] arm perif: vaddr 0xf2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
[    0.350542] Bus freq driver module loaded
[    0.350736] Bus freq driver Enabled
[    0.351726] mxc_dvfs_core_probe
[    0.351991] DVFS driver module loaded
[    0.353820] regulator_init_complete: max77696_ldo10: incomplete constraints, leaving on
[    0.354461] regulator_init_complete: max77696_ldo7: incomplete constraints, leaving on
[    0.354681] regulator_init_complete: max77696_ldo6: incomplete constraints, leaving on
[    0.355940] regulator_init_complete: max77696_buck6: incomplete constraints, leaving on
[    0.356162] regulator_init_complete: max77696_buck5: incomplete constraints, leaving on
[    0.356590] regulator_init_complete: max77696_buck2dvs: incomplete constraints, leaving on
[    0.356812] regulator_init_complete: max77696_buck1dvs: incomplete constraints, leaving on
[    0.386104] max77696-rtc max77696-rtc.0: setting system clock to 2018-08-21 14:10:44 UTC (1534860644)
[    0.429690] MAX77696 Main Charger Driver 1.0.0 Installed
[    0.432948] MAX77696 Energy Harvester Driver 1.0.0 Installed
[    0.433514] Freeing init memory: 1040K
[    0.438015] emmc: I def:mmcpartinfo:vendor=micron, host=mmc0:
[    0.472936] mmc0: new high speed DDR MMC card at address 0001
[    0.473232] mmcblk0: mmc0:0001 MMC02G 1.83 GiB
[    0.473356] mmcblk0boot0: mmc0:0001 MMC02G partition 1 2.00 MiB
[    0.473478] mmcblk0boot1: mmc0:0001 MMC02G partition 2 2.00 MiB
[    0.475237]  mmcblk0: p1 p2 p3 p4
[    0.477579]  mmcblk0boot1: unknown partition table
[    0.479669]  mmcblk0boot0: unknown partition table
[    0.551379] mxc_epdc_eink: module license 'proprietary' taints kernel.
[    0.553415] Disabling lock debugging due to kernel taint
[    0.553818] INFO:Loaded module /lib/modules/mxc_epdc_eink.ko  (10776 bytes)
[    1.177109] add wake up source irq 104
[    2.247135] KERNEL: I pmic:fg battery id check::wario_battery_valid=1
[    4.057071] INFO:Loaded module /lib/modules/mxc_epdc_fb.ko  (85104 bytes)
[    4.257437] INFO:eink initialized... (786432 bytes)
[    5.264779] INFO:!!! Checking MBR /dev/mmcblk0 !!!!
[    5.271028] INFO:partition 2, start sector is 782336
[    5.271114] INFO:partition 3, start sector is 913408
[    5.271197] INFO:partition 4, start sector is 1044480
[    5.271263] INFO:maximizing partition 2797568 sectors
[    5.271307] INFO:*** Partition table verified for /dev/mmcblk0 ***
[    5.275124] INFO:Setup loop device /dev/loop0 for /dev/mmcblk0p4 + 8192
[    5.282746] INFO:Checking for updates... (auto-pilot mode)
[    5.283037] INFO:No update*.bin found; no update needed.
[    5.287471] INFO:no updates found.
[    6.177049] EXT3-fs: barriers not enabled
[    6.178126] kjournald starting.  Commit interval 5 seconds
[    6.178205] EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
[    7.521982] udevd (723): /proc/723/oom_adj is deprecated, please use /proc/723/oom_score_adj instead.
[    8.012897] cyttsp4_i2c_adapter 1-0024: cyttsp4_i2c_probe: Starting cyttsp4_i2c_adapter probe...
[    8.012978] cyttsp4_i2c_adapter 1-0024: cyttsp4_i2c_probe: Successful probe cyttsp4_i2c_adapter
[    8.013034] cyttsp4_i2c_init: Cypress TTSP I2C Touchscreen Driver (Built 20121109) rc=0
[    8.018548] Initializing Wario Proximity Sensor
[    8.059015] i2c-core: driver [wario_prox] using legacy suspend method
[    8.059025] i2c-core: driver [wario_prox] using legacy resume method
[    9.206990] ARC USBOTG Device Controller driver (1 August 2005)
[    9.207217] add wake up source irq 75
[    9.230782] g_file_storage gadget: File-backed Storage Gadget, version: 1 September 2010
[    9.230797] g_file_storage gadget: Number of LUNs=1
[    9.230814] dr_controller_run: udc enter low power mode
[    9.230831] fsl-usb2-udc: bind to driver g_file_storage
[    9.347873] fuse init (API version 7.16)
[    9.456994] EXT3-fs: barriers not enabled
[    9.609863] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_core_probe: startup
[    9.609879] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_core_probe: Init HW
[    9.925459] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_irq: restart switch to bl m=0 -> m=2
[   10.263673] kjournald starting.  Commit interval 5 seconds
[   10.266737] EXT3-fs (mmcblk0p3): using internal journal
[   10.266763] EXT3-fs (mmcblk0p3): recovery complete
[   10.269588] EXT3-fs (mmcblk0p3): mounted filesystem with writeback data mode
[   10.549819] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_si_get_test_data: SCANNING is ENABLED codel=0E
[   10.554924] cyttsp4_core:fw:ver=0108:
[   10.561335] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: set_mode: back from wait t=100 cd->mode=4
[   10.603446] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_startup_: cyttsp4_exit startup r=0...
[   10.603519] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_core_probe: ok
[   10.657239] cyttsp4_core_init: Cypress TTSP v4 core driver (Built 20121109) rc=0
[   10.703097] cyttsp4_mt cyttsp4_mt.main_ttsp_core: cyttsp4_mt_probe
[   10.719551] input: cyttsp4_mt as /devices/platform/imx-i2c.1/i2c-1/1-0024/main_ttsp_core.cyttsp4_i2c_adapter/cyttsp4_mt.main_ttsp_core/input/input1
[   10.719745] cyttsp4_mt_init: Cypress TTSP MT v4 multi-touch (Built 20121109), rc=0
[   10.760506] cyttsp4_device_access_init: Registering device access device for core_id: main_ttsp_core
[   10.760620] cyttsp4_device_access cyttsp4_device_access.main_ttsp_core: cyttsp4_device_access_probe
[   10.799214] cyttsp4_device_access_init: Cypress TTSP Device Access (Built 20121109) rc=0
[   10.799951] cyttsp: I cyttsp_proc_write::command=unlock:
[   11.925219] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: set_mode: back from wait t=98 cd->mode=16
[   11.944180] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_irq: cyttsp4_CaT_IRQ=A0 00 C2
[   11.946719] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_irq: cyttsp4_CaT_IRQ=20 00 43
[   11.956606] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: set_mode: back from wait t=100 cd->mode=4
[   12.068380] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: set_mode: back from wait t=98 cd->mode=16
[   12.086218] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_irq: cyttsp4_CaT_IRQ=A0 00 C3
[   12.095945] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: set_mode: back from wait t=100 cd->mode=4
[   12.117595] cyttsp4_tc_self_threshold:0xF4
[   13.149045] cyttsp4_device_access_exit: Unregistering device access device for core_id: main_ttsp_core
[   13.149058] cyttsp4_device_access_exit: module exit
[   16.319260] cyttsp: I cyttsp_proc_write::command=unlock:
[   31.028184] Loading Atheros ar6003 driver
[   31.128188] ar6003 Driver returning from ar6000_init_module
[   31.731415] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
[   31.740448] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
[   31.744042] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
[   31.744780] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
[   31.768355] mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
[   31.768488] mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
[   31.768617] mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
[   31.768690] mmc1: new high speed SDIO card at address 0001
[   31.808196] ar6000_drc.c: ar6000_transfer_bin_file cal file name: /opt/ar6k/target/AR6003/hw2.1.1/bin/active_calibration_pinot
[   31.869688] MAC from kernel xx:xx:xx:xx:xx:FD
[   32.296180] ar6003 driver: Completed loading the module ar6000_avail_ev
[  683.390733] unregistered gadget driver 'g_file_storage'
[  683.479992] usb0: MAC ee:19:00:00:00:00
[  683.480002] usb0: HOST MAC ee:49:00:00:00:00
[  683.480012] g_ether gadget: controller 'fsl-usb2-udc' not recognized; trying CDC Ethernet (ECM)
[  683.480045] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[  683.480060] g_ether gadget: g_ether ready
[  683.480071] dr_controller_run: udc enter low power mode
[  683.480087] fsl-usb2-udc: bind to driver g_ether
[  774.864556] iwioctl: cmd=0x8b03 not allowed in this mode
[  774.873602] iwioctl: cmd=0x8b1d not allowed in this mode
[  774.881429] iwioctl: cmd=0x8b23 not allowed in this mode
[  774.886749] iwioctl: cmd=0x8b25 not allowed in this mode

## hardware_lsmod.txt
Module                  Size  Used by
g_ether                31488  0
ar6003                329459  0
pkt_monitor             1871  0
cyttsp4_mt_b            6380  0
cyttsp4_core           26873  1
fuse                   56722  2
arcotg_udc             23694  1 g_ether
prox_pic12lf1822        7893  0
cyttsp4_i2c             2239  1
mxc_epdc_fb            64583  4
mxc_epdc_eink           7554  1 mxc_epdc_fb

## openwrt.conf
CONFIG_TARGET_imx6=y
CONFIG_TARGET_imx6_Generic=y
CONFIG_TARGET_BOARD="imx6"
CONFIG_PACKAGE_kmod-crypto-crc32c=y
CONFIG_PACKAGE_kmod-crypto-hash=y
CONFIG_PACKAGE_kmod-fs-ext4=y
CONFIG_PACKAGE_kmod-fs-vfat=y
CONFIG_PACKAGE_kmod-lib-crc16=y
CONFIG_PACKAGE_kmod-nls-base=y
CONFIG_PACKAGE_kmod-nls-cp437=y
CONFIG_PACKAGE_kmod-nls-iso8859-1=y
CONFIG_PACKAGE_kmod-nls-utf8=y
CONFIG_TARGET_ROOTFS_CPIOGZ=y
# CONFIG_TARGET_ROOTFS_SQUASHFS is not set
# CONFIG_TARGET_ROOTFS_TARGZ is not set
# CONFIG_TARGET_ROOTFS_UBIFS is not set
# CONFIG_TARGET_UBIFS_COMPRESSION_ZLIB is not set
# CONFIG_TARGET_UBIFS_COMPRESSION_LZO is not set
# CONFIG_TARGET_UBIFS_COMPRESSION_NONE is not set
# CONFIG_TARGET_UBIFS_COMPRESSION_ZLIB is not set
# CONFIG_TARGET_ar71xx_generic is not set
CONFIG_PACKAGE_kmod-usb-gadget-ehci-debug=y
CONFIG_PACKAGE_kmod-usb-gadget-eth=y
CONFIG_PACKAGE_kmod-usb-gadget-mass-storage=y
CONFIG_PACKAGE_kmod-usb-gadget-serial=y
CONFIG_PACKAGE_umdns=y
CONFIG_PACKAGE_kexec-tools=y

## orig_kernel_config.txt
#
# Automatically generated make config: don't edit
# Linux/arm 3.0.35 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_SCHED_CLOCK=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_KTIME_SCALAR=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-lab126"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_SHOW=y
# CONFIG_SPARSE_IRQ is not set

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CGROUPS is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="initramfs.list"
CONFIG_INITRAMFS_ROOT_UID=0
CONFIG_INITRAMFS_ROOT_GID=0
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
CONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_LAB126_PRINTK_BUFFER=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y

#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS4 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_TCC_926 is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_VT8500 is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_KEYBOARD_GPIO_POLLED is not set
CONFIG_IMX_HAVE_PLATFORM_DMA=y
CONFIG_IMX_HAVE_PLATFORM_FEC=y
CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC=y
CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT=y
CONFIG_IMX_HAVE_PLATFORM_IMX_SNVS_RTC=y
CONFIG_IMX_HAVE_PLATFORM_IMX_CAAM=y
CONFIG_IMX_HAVE_PLATFORM_IMX_I2C=y
CONFIG_IMX_HAVE_PLATFORM_IMX_SSI=y
CONFIG_IMX_HAVE_PLATFORM_IMX_UART=y
CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI=y
CONFIG_IMX_HAVE_PLATFORM_MXC_PWM=y
CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX=y
CONFIG_IMX_HAVE_PLATFORM_SPI_IMX=y
CONFIG_IMX_HAVE_PLATFORM_IMX_IPUV3=y
CONFIG_IMX_HAVE_PLATFORM_IMX_DVFS=y
CONFIG_IMX_HAVE_PLATFORM_IMX_DCP=y
CONFIG_IMX_HAVE_PLATFORM_RANDOM_RNGC=y
CONFIG_IMX_HAVE_PLATFORM_PERFMON=y
CONFIG_IMX_HAVE_PLATFORM_LDB=y
CONFIG_IMX_HAVE_PLATFORM_IMX_PXP=y
CONFIG_IMX_HAVE_PLATFORM_IMX_EPDC=y
CONFIG_IMX_HAVE_PLATFORM_IMX_SPDIF=y
CONFIG_IMX_HAVE_PLATFORM_IMX_ANATOP_THERMAL=y
CONFIG_IMX_HAVE_PLATFORM_FSL_OTG=y
CONFIG_IMX_HAVE_PLATFORM_FSL_USB_WAKEUP=y
CONFIG_IMX_HAVE_PLATFORM_IMX_PM=y
CONFIG_IMX_HAVE_PLATFORM_IMX_VDOA=y

#
# Freescale MXC Implementations
#
# CONFIG_ARCH_MX1 is not set
# CONFIG_ARCH_MX2 is not set
# CONFIG_ARCH_MX25 is not set
# CONFIG_ARCH_MX3 is not set
# CONFIG_ARCH_MX503 is not set
# CONFIG_ARCH_MX51 is not set
CONFIG_ARCH_MX6=y
CONFIG_ARCH_MX6Q=y
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
CONFIG_LAB126=y
# CONFIG_MACH_MX6Q_ARM2 is not set
# CONFIG_MACH_MX6SL_ARM2 is not set
CONFIG_MACH_MX6SL_WARIO=y
# CONFIG_MACH_MX6SL_EVK is not set
# CONFIG_MACH_MX6Q_SABRELITE is not set
# CONFIG_MACH_MX6Q_SABRESD is not set
# CONFIG_MACH_MX6Q_SABREAUTO is not set
# CONFIG_MACH_MX6Q_HDMIDONGLE is not set

#
# MX6 Options:
#
# CONFIG_IMX_PCIE is not set
CONFIG_USB_EHCI_ARC_H1=y
CONFIG_USB_FSL_ARC_OTG=y
# CONFIG_USB_ID_WAKEUP_ENABLE is not set
CONFIG_MX6_INTER_LDO_BYPASS=y
# CONFIG_MX6_CLK_FOR_BOOTUI_TRANS is not set
CONFIG_ISP1504_MXC=y
# CONFIG_MXC_IRQ_PRIOR is not set
# CONFIG_MXC_PWM is not set
# CONFIG_MXC_DEBUG_BOARD is not set
# CONFIG_MXC_REBOOT_MFGMODE is not set
# CONFIG_MXC_REBOOT_ANDROID_CMD is not set
CONFIG_ARCH_HAS_RNGC=y
CONFIG_ARCH_MXC_IOMUX_V3=y
CONFIG_ARCH_MXC_AUDMUX_V2=y
CONFIG_IRAM_ALLOC=y
CONFIG_CLK_DEBUG=y
CONFIG_DMA_ZONE_SIZE=32

#
# System MMU
#

#
# Processor Type
#
CONFIG_CPU_V7=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y

#
# Processor Features
#
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
# CONFIG_SWP_EMULATE is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_CACHE_L2X0=y
CONFIG_CACHE_PL310=y
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
# CONFIG_PL310_ERRATA_588369 is not set
# CONFIG_PL310_ERRATA_727915 is not set
CONFIG_ARM_ERRATA_743622=y
# CONFIG_ARM_ERRATA_753970 is not set
CONFIG_ARM_ERRATA_754322=y
CONFIG_ARM_GIC=y

#
# Bus support
#
CONFIG_ARM_AMBA=y
# CONFIG_PCI_SYSCALL is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCCARD is not set
CONFIG_ARM_ERRATA_764369=y
# CONFIG_PL310_ERRATA_769419 is not set

#
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
# CONFIG_HIGHMEM is not set
CONFIG_HW_PERF_EVENTS=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_DEPRECATED_PARAM_STRUCT is not set

#
# Boot options
#
# CONFIG_USE_OF is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="rootwait log_pos_goal=0x8fffc000 console=ttymxc0,115200 root=/dev/mmcblk0p1 ro ip=off quiet video=mxcepdcfb:E60,bpp=8,x_mem=3M"
CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_AUTO_ZRELADDR is not set

#
# CPU Power Management
#

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_OVERRIDE_LAB126=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_INTERACTIVE is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_IMX=y
# CONFIG_CPU_IDLE is not set

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y

#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set

#
# Power management options
#
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_DEVICE_TIME_DEBUG=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME_CLK=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK=y
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
# CONFIG_NETFILTER_XT_CONNMARK is not set

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_NETFILTER_XT_MATCH_MAC=y
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=y
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE="imx/default.fw.gz"
CONFIG_EXTRA_FIRMWARE_DIR="firmware"
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085 is not set
CONFIG_MXS_PERFMON=m
CONFIG_UEVENT_SHRINKER=y
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IWMC3200TOP is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_MII is not set
# CONFIG_PHYLIB is not set
# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
CONFIG_AR6003=m
# CONFIG_AR600x_SD31_XXX is not set
# CONFIG_AR600x_WB31_XXX is not set
# CONFIG_AR600x_SD32_XXX is not set
CONFIG_AR600x_CUSTOM_XXX=y
# CONFIG_AR6003_ENABLE_COEXISTENCE is not set
# CONFIG_AR6003_HCI_BRIDGE is not set
# CONFIG_AR6003_CFG80211 is not set
CONFIG_AR6003_HTC_RAW_INTERFACE=y
CONFIG_AR6003_VIRTUAL_SCATTER_GATHER=y
# CONFIG_AR6003_SKIP_ABI_VERSION_CHECK is not set
# CONFIG_AR6003_DEBUG is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WAN=y
# CONFIG_HDLC is not set
# CONFIG_DLCI is not set
CONFIG_WARIO_WAN=y

#
# CAIF transport drivers
#
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_LIS3DH_ACCELEROMETER is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_IMX is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_KEYBOARD_FSR=m
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_NOVATEK is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_P1003 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_CYPRESS is not set
CONFIG_CYPRESS_CYTTSP4_BUS=y
CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP4=m
# CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP4_INCLUDE_FW is not set
CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP4_USE_FW_BIN_FILE=y
# CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP4_AUTO_LOAD_TOUCH_PARAMS is not set
# CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP4_DEBUG is not set
CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP4_I2C=m
# CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP4_SPI is not set
# CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP4_MT_A is not set
CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP4_MT_B=m
# CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP4_BUTTON is not set
CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP4_DEVICE_ACCESS=m
CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP4_LOADER=m
CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP4_DEBUG_MODULE=m
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_MAX77696_ONKEY=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_ISL29023 is not set
CONFIG_INPUT_PROX_PIC12LF1822=m
CONFIG_INPUT_ALS_MAX44009=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_AMBAKMI is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=5
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_AMBA_PL011 is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX3107 is not set
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_FSL_OTP is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_WARIO_HALL=y
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_FSL_RNGC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_RAMOOPS is not set
# CONFIG_MXS_VIIM is not set
# CONFIG_MAX77696_CHARDEV is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IMX=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_IMX_VER_2_3=y
CONFIG_SPI_IMX=y
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PL022 is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_BASIC_MMIO is not set
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_PL061 is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X_IRQ is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
CONFIG_GPIO_MAX77696=y
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_BATTERY_MAX77696=y
CONFIG_CHARGER_MAX77696=y
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_SABRESD_MAX8903 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX17135 is not set
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_MAX77696=y
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_MAG3110 is not set
# CONFIG_MXC_MMA8450 is not set
# CONFIG_MXC_MMA8451 is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ARM_SP805_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
CONFIG_IMX2_WDT=y
# CONFIG_WATCHDOG_MAX77696 is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MAX77696=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_PMIC_DIALOG is not set
# CONFIG_MFD_MC_PMIC is not set
# CONFIG_MFD_MC34708 is not set
# CONFIG_MFD_PFUZE is not set
# CONFIG_MFD_MC13XXX is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_MAX17135=y
# CONFIG_MFD_MXC_HDMI is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_MAX77696=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_MC34708 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_ANATOP=y
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_MAX17135=y
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_ARMCLCD is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_MAX77696=y

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_FB_MXC=y
# CONFIG_FB_MXC_EDID is not set
# CONFIG_FB_MXC_SYNC_PANEL is not set
# CONFIG_FB_MXC_ASYNC_PANEL is not set
CONFIG_FB_MXC_EINK_PANEL=m
CONFIG_FB_MXC_EINK_REAGL=m
# CONFIG_FB_MXC_EINK_WORK_BUFFER_B is not set
# CONFIG_FB_MXC_EINK_AUTO_UPDATE_MODE is not set
# CONFIG_FB_MXC_SIPIX_PANEL is not set
# CONFIG_FB_MXC_ELCDIF_FB is not set

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_FSL_USB_TEST_MODE is not set
CONFIG_USB_EHCI_ARC=y
# CONFIG_USB_EHCI_ARC_OTG is not set
# CONFIG_USB_EHCI_ARC_HSIC is not set
# CONFIG_USB_STATIC_IRAM is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_MXC is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_ARC=y
# CONFIG_IMX_USB_CHARGER is not set
CONFIG_USB_ARC=m
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_FUSB300 is not set
# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA_U2O is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_FILE_STORAGE=m
# CONFIG_FSL_UTP is not set
CONFIG_USB_FILE_STORAGE_TEST=y
# CONFIG_USB_MASS_STORAGE is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ULPI is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MXC_OTG is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_ARMMMCI is not set
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_MAX77696=y
# CONFIG_LEDS_TRIGGERS is not set

#
# LED Triggers
#

#
# LED Triggers
#
# CONFIG_NFC_DEVICES is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX77696=y
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_MXC is not set
# CONFIG_RTC_DRV_MXC_V2 is not set
CONFIG_RTC_DRV_SNVS=y
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_PL030 is not set
# CONFIG_RTC_DRV_PL031 is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_AMBA_PL08X is not set
# CONFIG_DW_DMAC is not set
CONFIG_MXC_PXP_V2=y
CONFIG_MXC_PXP_CLIENT_DEVICE=y
# CONFIG_TIMB_DMA is not set
CONFIG_IMX_SDMA=y
# CONFIG_MXS_DMA is not set
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_MMIO=y

#
# MXC support drivers
#
CONFIG_MXC_IPU=y
CONFIG_MXC_IPU_V3=y
CONFIG_MXC_IPU_V3H=y

#
# MXC SSI support
#
# CONFIG_MXC_SSI is not set

#
# MXC Digital Audio Multiplexer support
#
# CONFIG_MXC_DAM is not set

#
# MXC PMIC support
#
# CONFIG_MXC_PMIC_MC13783 is not set
# CONFIG_MXC_PMIC_MC13892 is not set
# CONFIG_MXC_PMIC_MC34704 is not set
# CONFIG_MXC_PMIC_MC9SDZ60 is not set
# CONFIG_MXC_PMIC_MC9S08DZ60 is not set

#
# MXC Security Drivers
#
# CONFIG_MXC_SECURITY_SCC is not set
# CONFIG_MXC_SECURITY_RNG is not set

#
# MXC MPEG4 Encoder Kernel module support
#
# CONFIG_MXC_HMP4E is not set

#
# MXC HARDWARE EVENT
#
# CONFIG_MXC_HWEVENT is not set

#
# MXC VPU(Video Processing Unit) support
#
# CONFIG_MXC_VPU is not set

#
# MXC Asynchronous Sample Rate Converter support
#
# CONFIG_MXC_ASRC is not set

#
# MXC Bluetooth support
#

#
# Broadcom GPS ioctrl support
#

#
# MXC Media Local Bus Driver
#
# CONFIG_MXC_MLB150 is not set

#
# i.MX ADC support
#
# CONFIG_IMX_ADC is not set

#
# MXC Vivante GPU support
#
# CONFIG_MXC_GPU_VIV is not set

#
# ANATOP_THERMAL
#
# CONFIG_ANATOP_THERMAL is not set

#
# MXC MIPI Support
#
# CONFIG_MXC_MIPI_CSI2 is not set

#
# MXC HDMI CEC (Consumer Electronics Control) support
#
# CONFIG_MXC_HDMI_CEC is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_XATTR is not set
# CONFIG_SQUASHFS_LZO is not set
# CONFIG_SQUASHFS_XZ is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_ARM_UNWIND is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_LL is not set
CONFIG_OC_ETM=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_TEST=m
# CONFIG_CRYPTO_CRYPTODEV is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
# CONFIG_CRYPTO_DEV_FSL_CAAM_SM is not set
# CONFIG_CRYPTO_DEV_DCP is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
# CONFIG_AVERAGE is not set

## references.md

      
    Raw
  

              references.md
            
          
Paperwhite 2 teardown
Kindle Hacking
How to Take Apart the Kindle Paperwhite
Kindle Touch 7 teardown
serial port
fread.ink
amazon gpl soruces
PaperTTY
http://88proof.com/hardware/kindle-20131009.html
	[ 0.000000] Linux version 3.0.35-lab126 (jenkins-official@sjc10-jbuild10) (collect2: ld returned 1 exit status) #1 Wed Apr 23 01:26:01 PDT 2014
	[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
	[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
	[ 0.000000] Machine: Freescale i.MX 6SoloLite based Wario Board
	[ 0.000000] Will try to place printk log at 8fffc000
	[ 0.000000] Memory policy: ECC disabled, Data cache writeback
	[ 0.000000] CPU identified as i.MX6SoloLite, silicon rev 1.2
	[ 0.000000] On node 0 totalpages: 65536
	[ 0.000000] free_area_init_node: node 0, pgdat c04e0f2c, node_mem_map c2000000
	[ 0.000000] DMA zone: 64 pages used for memmap
	[ 0.000000] DMA zone: 0 pages reserved
	[ 0.000000] DMA zone: 8128 pages, LIFO batch:0
	[ 0.000000] Normal zone: 448 pages used for memmap
	[ 0.000000] Normal zone: 56896 pages, LIFO batch:15
	[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
	[ 0.000000] pcpu-alloc: [0] 0
	[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
	[ 0.000000] Kernel command line: rootwait log_pos_goal=0x8fffc000 console=ttymxc0,115200 root=/dev/mmcblk0p1 ro ip=off quiet video=mxcepdcfb:E60,bpp=8,x_mem=3M
	[ 0.000000] Prink buffer will be relocated to physical address: 8fff2000
	[ 0.000000] log_buf_len: 32768
	[ 0.000000] early log buf free: 31341(95%)
	[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
	[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
	[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
	[ 0.000000] Memory: 256MB = 256MB total
	[ 0.000000] Memory: 254640k/254640k available, 7504k reserved, 0K highmem
	[ 0.000000] Virtual kernel memory layout:
	[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
	[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
	[ 0.000000] DMA : 0xfde00000 - 0xffe00000 ( 32 MB)
	[ 0.000000] vmalloc : 0xd0800000 - 0xf2000000 ( 536 MB)
	[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
	[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
	[ 0.000000] .init : 0xc0008000 - 0xc010c000 (1040 kB)
	[ 0.000000] .text : 0xc010c000 - 0xc04ae000 (3720 kB)
	[ 0.000000] .data : 0xc04ae000 - 0xc04e1a60 ( 207 kB)
	[ 0.000000] .bss : 0xc04e1a84 - 0xc05072a0 ( 151 kB)
	[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
	[ 0.000000] NR_IRQS:624
	[ 0.000000] MXC GPIO hardware
	[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
	[ 0.000000] arm_max_freq=1GHz
	[ 0.000000] MXC_Early serial console at MMIO 0x2020000 (options '115200')
	[ 0.000000] bootconsole [ttymxc0] enabled
	[ 0.000000] Console: colour dummy device 80x30
	[ 0.000267] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
	[ 0.060113] pid_max: default: 32768 minimum: 301
	[ 0.060373] Mount-cache hash table entries: 512
	[ 0.060737] CPU: Testing write buffer coherency: ok
	[ 0.060874] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
	[ 0.067836] print_constraints: dummy:
	[ 0.068004] NET: Registered protocol family 16
	[ 0.072003] print_constraints: vddpu: 725 <--> 1300 mV at 700 mV fast normal
	[ 0.072299] print_constraints: vddcore: 725 <--> 1300 mV at 1475 mV fast normal
	[ 0.072599] print_constraints: vddsoc: 725 <--> 1300 mV at 1475 mV fast normal
	[ 0.072898] print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
	[ 0.073239] print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
	[ 0.073550] print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal
	[ 0.075128] LAB126 Board id - 02E2201140760UB3
	[ 0.079322] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
	[ 0.079335] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
	[ 0.079348] hw-breakpoint: maximum watchpoint size is 4 bytes.
	[ 0.079366] L310 cache controller enabled
	[ 0.079377] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x02030000, Cache size: 262144 B
	[ 0.087821] bio: create slab <bio-0> at 0
	[ 0.091650] max77696> regulator init
	[ 0.092567] spi_imx imx6q-ecspi.0: probed
	[ 0.092933] usbcore: registered new interface driver usbfs
	[ 0.093051] usbcore: registered new interface driver hub
	[ 0.093189] usbcore: registered new device driver usb
	[ 0.095319] Reboot Reason - Metric Framework Reporting
	[ 0.095332] kernel: kernel_metric_generic,0,counter,event_recorder,ercflags,SFT_PRSTRT,1,
	[ 0.095341] Reboot Reason - Legacy Metric Reporting
	[ 0.095347]
	[ 0.098418] MAX77696 TOPSYS 1.0.0 Installed
	[ 0.101319] max77696-gpio max77696-gpio.0: gpio#0 -- -- func-0 in
	[ 0.102800] max77696-gpio max77696-gpio.0: gpio#1 -- -- func--1 in
	[ 0.104271] max77696-gpio max77696-gpio.0: gpio#3 -- -- func-0 in
	[ 0.106134] MAX77696 GPIO Driver 1.0.0 Installed
	[ 0.107072] buck mode: 4
	[ 0.107815] buck mode: 4
	[ 0.108764] print_constraints: max77696_buck1: 900 <--> 1300 mV at 1250 mV fast normal idle standby
	[ 0.109309] buck mode: 4
	[ 0.110318] print_constraints: max77696_buck1dvs: 600 <--> 1300 mV at 900 mV fast normal idle standby
	[ 0.110889] buck mode: 4
	[ 0.111631] buck mode: 4
	[ 0.112579] print_constraints: max77696_buck2: 900 <--> 1300 mV at 1200 mV fast normal idle standby
	[ 0.113102] buck mode: 4
	[ 0.114051] print_constraints: max77696_buck2dvs: 600 <--> 1300 mV at 900 mV fast normal idle standby
	[ 0.114586] print_constraints: max77696_buck3: 600 <--> 3387 mV at 1300 mV fast normal idle standby
	[ 0.115295] buck mode: 4
	[ 0.116034] buck mode: 4
	[ 0.116774] print_constraints: max77696_buck4: 1200 mV fast normal idle standby
	[ 0.117301] buck mode: 4
	[ 0.118251] print_constraints: max77696_buck5: 600 <--> 3387 mV at 1800 mV fast normal idle standby
	[ 0.118792] buck mode: 4
	[ 0.119741] print_constraints: max77696_buck6: 600 <--> 3387 mV at 3200 mV fast normal idle standby
	[ 0.119782] MAX77696 Buck Regulators Driver 1.0.1 Installed
	[ 0.120674] print_constraints: max77696_ldo1: 800 <--> 3950 mV at 3300 mV normal idle standby
	[ 0.121242] print_constraints: max77696_ldo2: 800 <--> 3950 mV at 3000 mV normal idle standby
	[ 0.121793] print_constraints: max77696_ldo3: 800 <--> 3950 mV at 2500 mV normal idle standby
	[ 0.122341] print_constraints: max77696_ldo4: 800 <--> 2375 mV at 1800 mV normal idle standby
	[ 0.122872] print_constraints: max77696_ldo5: 800 <--> 2375 mV at 1800 mV normal idle standby
	[ 0.123419] print_constraints: max77696_ldo6: 800 <--> 3950 mV at 3200 mV normal idle standby
	[ 0.123969] print_constraints: max77696_ldo7: 800 <--> 3950 mV at 3200 mV normal idle standby
	[ 0.124513] print_constraints: max77696_ldo8: 800 <--> 2375 mV at 1100 mV normal idle standby
	[ 0.125053] print_constraints: max77696_ldo9: 800 <--> 2375 mV at 1100 mV normal idle standby
	[ 0.125607] print_constraints: max77696_ldo10: 2400 <--> 5550 mV at 5200 mV normal idle standby
	[ 0.126399] MAX77696 Linear Regulators Driver 1.0.2 Installed
	[ 0.127015] print_constraints: max77696_lsw1:
	[ 0.127352] print_constraints: max77696_lsw2:
	[ 0.127679] print_constraints: max77696_lsw3:
	[ 0.127974] print_constraints: max77696_lsw4:
	[ 0.128018] MAX77696 Load Switches Driver 1.0.0 Installed
	[ 0.129232] print_constraints: max77696-display:
	[ 0.129964] print_constraints: max77696-vcom:
	[ 0.130514] print_constraints: max77696-vee:
	[ 0.130872] print_constraints: max77696-vneg:
	[ 0.131214] print_constraints: max77696-vpos:
	[ 0.131516] print_constraints: max77696-vddh:
	[ 0.132523]
	[ 0.132526] EPD vreg probe complete!
	[ 0.133122] print_constraints: max77696_vddq: 240 <--> 984 mV at 600 mV
	[ 0.133177] MAX77696 LPDDR2 Termination Supply Driver 1.0.1 Installed
	[ 0.134468] MAX77696 I2C Driver 1.0.0 Installed
	[ 0.137022] i2c-core: driver [max17135] using legacy suspend method
	[ 0.137033] i2c-core: driver [max17135] using legacy resume method
	[ 0.137066] Switching to clocksource mxc_timer1
	[ 0.147893] NET: Registered protocol family 2
	[ 0.147987] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
	[ 0.148174] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
	[ 0.148295] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
	[ 0.148354] TCP: Hash tables configured (established 8192 bind 8192)
	[ 0.148363] TCP reno registered
	[ 0.148371] UDP hash table entries: 256 (order: 0, 4096 bytes)
	[ 0.148388] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
	[ 0.148727] NET: Registered protocol family 1
	[ 0.148902] RPC: Registered named UNIX socket transport module.
	[ 0.148912] RPC: Registered udp transport module.
	[ 0.148919] RPC: Registered tcp transport module.
	[ 0.148925] RPC: Registered tcp NFSv4.1 backchannel transport module.
	[ 0.153037] etb: probe of etb failed with error -2
	[ 0.153292] etm: probe of etm.0 failed with error -2
	[ 0.153596] Static Power Management for Freescale i.MX6
	[ 0.153606] wait mode is enabled for i.MX6
	[ 0.153762] cpaddr = d0820000 suspend_iram_base=d081c000
	[ 0.153819] PM driver module loaded
	[ 0.154085] IMX usb wakeup probe
	[ 0.154107] the wakeup pdata is 0xce298080
	[ 0.154441] IMX usb wakeup probe
	[ 0.154458] the wakeup pdata is 0xce298200
	[ 0.154612] cpu regulator mode:ldo_bypass
	[ 0.155008] i.MXC CPU frequency driver
	[ 0.169238] squashfs: version 4.0 (2009/01/31) Phillip Lougher
	[ 0.170254] msgmni has been set to 497
	[ 0.170641] io scheduler noop registered
	[ 0.170721] io scheduler cfq registered (default)
	[ 0.171160] MAX77696 Backlight Driver 1.0.0 Installed
	[ 0.171921] imx-sdma imx-sdma: loaded firmware 1.1
	[ 0.176380] imx-sdma imx-sdma: initialized
	[ 0.178619] Serial: IMX driver
	[ 0.178734] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
	[ 0.178763] console [ttymxc0] enabled, bootconsole disabled
	[ 0.182490] loop: module loaded
	[ 0.182728] MAX77696 32kHz Oscillator Driver 1.0.0 Installed
	[ 0.183295] input: max77696-onkey as /devices/platform/imx-i2c.0/i2c-0/0-003c/max77696-onkey.0/input/input0
	[ 0.186483] MAX77696 ONKEY Driver 1.0.0 Installed
	[ 0.208507] max77696-rtc max77696-rtc.0: rtc core: registered max77696-rtc.0 as rtc0
	[ 0.228419] max77696-rtc max77696-rtc.0: rtc core: registered max77696-rtc.1 as rtc1
	[ 0.247727] MAX77696 RTC Driver 1.0.2 Installed
	[ 0.248436] snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc2
	[ 0.248590] i2c /dev entries driver
	[ 0.252587] max77696-battery max77696-battery.0: Voltage alert 3400mV ... 4260mV
	[ 0.253001] max77696-battery max77696-battery.0: SOC alert (disabled)
	[ 0.253905] MAX77696 Fuel Gauge Driver 1.0.0 Installed
	[ 0.255787] MAX77696 USB Interface Circuit Driver 1.0.0 Installed
	[ 0.257568] max77696-adc max77696-adc.0: ADC average rate: 32 sample(s)
	[ 0.257580] max77696-adc max77696-adc.0: ADC delay: 0 nsec
	[ 0.257588] max77696-adc max77696-adc.0: ADC cur src: 50 uA
	[ 0.257600] MAX77696 ADC Driver 1.0.1 Installed
	[ 0.258090] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
	[ 0.258468] sdhci: Secure Digital Host Controller Interface driver
	[ 0.258476] sdhci: Copyright(c) Pierre Ossman
	[ 0.258582] mmc0: no vmmc regulator found
	[ 0.259860] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.1] using DMA
	[ 0.260929] mmc1: no vmmc regulator found
	[ 0.263304] mmc1: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA
	[ 0.264004] Registered led device: max77696-leds.0
	[ 0.264013] MAX77696 LED Driver #0 1.0.0 Installed
	[ 0.264204] Registered led device: max77696-leds.1
	[ 0.264213] MAX77696 LED Driver #1 1.0.0 Installed
	[ 0.264727] nf_conntrack version 0.5.0 (3978 buckets, 15912 max)
	[ 0.265453] ip_tables: (C) 2000-2006 Netfilter Core Team
	[ 0.265520] TCP cubic registered
	[ 0.265529] NET: Registered protocol family 17
	[ 0.265548] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
	[ 0.265678] LPDDR2 MfgId: 0x1 [Samsung]
	[ 0.269570]
	[ 0.269573] just text: vaddr 0xc011e9bc, va 0xc011e200 pa 0x801000c3 attr 0x6
	[ 0.278039]
	[ 0.278042] nmx6sl_wfi_iram: vaddr 0xd081a000, va 0xd081a200 pa 0x902043 attr 0x2
	[ 0.287014]
	[ 0.287017] mx6sl_ddr: vaddr 0xd0852000, va 0xd0852200 pa 0x903043 attr 0x2
	[ 0.295477]
	[ 0.295479] mx6sl_iomux: vaddr 0xf40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
	[ 0.304372]
	[ 0.304374] ANATOP: vaddr 0xf40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
	[ 0.312833]
	[ 0.312835] CCM: vaddr 0xf40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
	[ 0.321032]
	[ 0.321034] MMDC_P0: vaddr 0xf41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
	[ 0.329578]
	[ 0.329580] L2: vaddr 0xf2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
	[ 0.337603]
	[ 0.337606] arm perif: vaddr 0xf2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
	[ 0.350542] Bus freq driver module loaded
	[ 0.350736] Bus freq driver Enabled
	[ 0.351726] mxc_dvfs_core_probe
	[ 0.351991] DVFS driver module loaded
	[ 0.353820] regulator_init_complete: max77696_ldo10: incomplete constraints, leaving on
	[ 0.354461] regulator_init_complete: max77696_ldo7: incomplete constraints, leaving on
	[ 0.354681] regulator_init_complete: max77696_ldo6: incomplete constraints, leaving on
	[ 0.355940] regulator_init_complete: max77696_buck6: incomplete constraints, leaving on
	[ 0.356162] regulator_init_complete: max77696_buck5: incomplete constraints, leaving on
	[ 0.356590] regulator_init_complete: max77696_buck2dvs: incomplete constraints, leaving on
	[ 0.356812] regulator_init_complete: max77696_buck1dvs: incomplete constraints, leaving on
	[ 0.386104] max77696-rtc max77696-rtc.0: setting system clock to 2018-08-21 14:10:44 UTC (1534860644)
	[ 0.429690] MAX77696 Main Charger Driver 1.0.0 Installed
	[ 0.432948] MAX77696 Energy Harvester Driver 1.0.0 Installed
	[ 0.433514] Freeing init memory: 1040K
	[ 0.438015] emmc: I def:mmcpartinfo:vendor=micron, host=mmc0:
	[ 0.472936] mmc0: new high speed DDR MMC card at address 0001
	[ 0.473232] mmcblk0: mmc0:0001 MMC02G 1.83 GiB
	[ 0.473356] mmcblk0boot0: mmc0:0001 MMC02G partition 1 2.00 MiB
	[ 0.473478] mmcblk0boot1: mmc0:0001 MMC02G partition 2 2.00 MiB
	[ 0.475237] mmcblk0: p1 p2 p3 p4
	[ 0.477579] mmcblk0boot1: unknown partition table
	[ 0.479669] mmcblk0boot0: unknown partition table
	[ 0.551379] mxc_epdc_eink: module license 'proprietary' taints kernel.
	[ 0.553415] Disabling lock debugging due to kernel taint
	[ 0.553818] INFO:Loaded module /lib/modules/mxc_epdc_eink.ko (10776 bytes)
	[ 1.177109] add wake up source irq 104
	[ 2.247135] KERNEL: I pmic:fg battery id check::wario_battery_valid=1
	[ 4.057071] INFO:Loaded module /lib/modules/mxc_epdc_fb.ko (85104 bytes)
	[ 4.257437] INFO:eink initialized... (786432 bytes)
	[ 5.264779] INFO:!!! Checking MBR /dev/mmcblk0 !!!!
	[ 5.271028] INFO:partition 2, start sector is 782336
	[ 5.271114] INFO:partition 3, start sector is 913408
	[ 5.271197] INFO:partition 4, start sector is 1044480
	[ 5.271263] INFO:maximizing partition 2797568 sectors
	[ 5.271307] INFO:* Partition table verified for /dev/mmcblk0 *
	[ 5.275124] INFO:Setup loop device /dev/loop0 for /dev/mmcblk0p4 + 8192
	[ 5.282746] INFO:Checking for updates... (auto-pilot mode)
	[ 5.283037] INFO:No update*.bin found; no update needed.
	[ 5.287471] INFO:no updates found.
	[ 6.177049] EXT3-fs: barriers not enabled
	[ 6.178126] kjournald starting. Commit interval 5 seconds
	[ 6.178205] EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
	[ 7.521982] udevd (723): /proc/723/oom_adj is deprecated, please use /proc/723/oom_score_adj instead.
	[ 8.012897] cyttsp4_i2c_adapter 1-0024: cyttsp4_i2c_probe: Starting cyttsp4_i2c_adapter probe...
	[ 8.012978] cyttsp4_i2c_adapter 1-0024: cyttsp4_i2c_probe: Successful probe cyttsp4_i2c_adapter
	[ 8.013034] cyttsp4_i2c_init: Cypress TTSP I2C Touchscreen Driver (Built 20121109) rc=0
	[ 8.018548] Initializing Wario Proximity Sensor
	[ 8.059015] i2c-core: driver [wario_prox] using legacy suspend method
	[ 8.059025] i2c-core: driver [wario_prox] using legacy resume method
	[ 9.206990] ARC USBOTG Device Controller driver (1 August 2005)
	[ 9.207217] add wake up source irq 75
	[ 9.230782] g_file_storage gadget: File-backed Storage Gadget, version: 1 September 2010
	[ 9.230797] g_file_storage gadget: Number of LUNs=1
	[ 9.230814] dr_controller_run: udc enter low power mode
	[ 9.230831] fsl-usb2-udc: bind to driver g_file_storage
	[ 9.347873] fuse init (API version 7.16)
	[ 9.456994] EXT3-fs: barriers not enabled
	[ 9.609863] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_core_probe: startup
	[ 9.609879] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_core_probe: Init HW
	[ 9.925459] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_irq: restart switch to bl m=0 -> m=2
	[ 10.263673] kjournald starting. Commit interval 5 seconds
	[ 10.266737] EXT3-fs (mmcblk0p3): using internal journal
	[ 10.266763] EXT3-fs (mmcblk0p3): recovery complete
	[ 10.269588] EXT3-fs (mmcblk0p3): mounted filesystem with writeback data mode
	[ 10.549819] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_si_get_test_data: SCANNING is ENABLED codel=0E
	[ 10.554924] cyttsp4_core:fw:ver=0108:
	[ 10.561335] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: set_mode: back from wait t=100 cd->mode=4
	[ 10.603446] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_startup_: cyttsp4_exit startup r=0...
	[ 10.603519] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_core_probe: ok
	[ 10.657239] cyttsp4_core_init: Cypress TTSP v4 core driver (Built 20121109) rc=0
	[ 10.703097] cyttsp4_mt cyttsp4_mt.main_ttsp_core: cyttsp4_mt_probe
	[ 10.719551] input: cyttsp4_mt as /devices/platform/imx-i2c.1/i2c-1/1-0024/main_ttsp_core.cyttsp4_i2c_adapter/cyttsp4_mt.main_ttsp_core/input/input1
	[ 10.719745] cyttsp4_mt_init: Cypress TTSP MT v4 multi-touch (Built 20121109), rc=0
	[ 10.760506] cyttsp4_device_access_init: Registering device access device for core_id: main_ttsp_core
	[ 10.760620] cyttsp4_device_access cyttsp4_device_access.main_ttsp_core: cyttsp4_device_access_probe
	[ 10.799214] cyttsp4_device_access_init: Cypress TTSP Device Access (Built 20121109) rc=0
	[ 10.799951] cyttsp: I cyttsp_proc_write::command=unlock:
	[ 11.925219] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: set_mode: back from wait t=98 cd->mode=16
	[ 11.944180] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_irq: cyttsp4_CaT_IRQ=A0 00 C2
	[ 11.946719] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_irq: cyttsp4_CaT_IRQ=20 00 43
	[ 11.956606] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: set_mode: back from wait t=100 cd->mode=4
	[ 12.068380] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: set_mode: back from wait t=98 cd->mode=16
	[ 12.086218] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_irq: cyttsp4_CaT_IRQ=A0 00 C3
	[ 12.095945] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: set_mode: back from wait t=100 cd->mode=4
	[ 12.117595] cyttsp4_tc_self_threshold:0xF4
	[ 13.149045] cyttsp4_device_access_exit: Unregistering device access device for core_id: main_ttsp_core
	[ 13.149058] cyttsp4_device_access_exit: module exit
	[ 16.319260] cyttsp: I cyttsp_proc_write::command=unlock:
	[ 31.028184] Loading Atheros ar6003 driver
	[ 31.128188] ar6003 Driver returning from ar6000_init_module
	[ 31.731415] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
	[ 31.740448] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
	[ 31.744042] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
	[ 31.744780] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
	[ 31.768355] mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
	[ 31.768488] mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
	[ 31.768617] mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
	[ 31.768690] mmc1: new high speed SDIO card at address 0001
	[ 31.808196] ar6000_drc.c: ar6000_transfer_bin_file cal file name: /opt/ar6k/target/AR6003/hw2.1.1/bin/active_calibration_pinot
	[ 31.869688] MAC from kernel xx:xx:xx:xx:xx:FD
	[ 32.296180] ar6003 driver: Completed loading the module ar6000_avail_ev
	[ 683.390733] unregistered gadget driver 'g_file_storage'
	[ 683.479992] usb0: MAC ee:19:00:00:00:00
	[ 683.480002] usb0: HOST MAC ee:49:00:00:00:00
	[ 683.480012] g_ether gadget: controller 'fsl-usb2-udc' not recognized; trying CDC Ethernet (ECM)
	[ 683.480045] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
	[ 683.480060] g_ether gadget: g_ether ready
	[ 683.480071] dr_controller_run: udc enter low power mode
	[ 683.480087] fsl-usb2-udc: bind to driver g_ether
	[ 774.864556] iwioctl: cmd=0x8b03 not allowed in this mode
	[ 774.873602] iwioctl: cmd=0x8b1d not allowed in this mode
	[ 774.881429] iwioctl: cmd=0x8b23 not allowed in this mode
	[ 774.886749] iwioctl: cmd=0x8b25 not allowed in this mode
	Module Size Used by
	g_ether 31488 0
	ar6003 329459 0
	pkt_monitor 1871 0
	cyttsp4_mt_b 6380 0
	cyttsp4_core 26873 1
	fuse 56722 2
	arcotg_udc 23694 1 g_ether
	prox_pic12lf1822 7893 0
	cyttsp4_i2c 2239 1
	mxc_epdc_fb 64583 4
	mxc_epdc_eink 7554 1 mxc_epdc_fb
	CONFIG_TARGET_imx6=y
	CONFIG_TARGET_imx6_Generic=y
	CONFIG_TARGET_BOARD="imx6"
	CONFIG_PACKAGE_kmod-crypto-crc32c=y
	CONFIG_PACKAGE_kmod-crypto-hash=y
	CONFIG_PACKAGE_kmod-fs-ext4=y
	CONFIG_PACKAGE_kmod-fs-vfat=y
	CONFIG_PACKAGE_kmod-lib-crc16=y
	CONFIG_PACKAGE_kmod-nls-base=y
	CONFIG_PACKAGE_kmod-nls-cp437=y
	CONFIG_PACKAGE_kmod-nls-iso8859-1=y
	CONFIG_PACKAGE_kmod-nls-utf8=y
	CONFIG_TARGET_ROOTFS_CPIOGZ=y
	# CONFIG_TARGET_ROOTFS_SQUASHFS is not set
	# CONFIG_TARGET_ROOTFS_TARGZ is not set
	# CONFIG_TARGET_ROOTFS_UBIFS is not set
	# CONFIG_TARGET_UBIFS_COMPRESSION_ZLIB is not set
	# CONFIG_TARGET_UBIFS_COMPRESSION_LZO is not set
	# CONFIG_TARGET_UBIFS_COMPRESSION_NONE is not set
	# CONFIG_TARGET_UBIFS_COMPRESSION_ZLIB is not set
	# CONFIG_TARGET_ar71xx_generic is not set
	CONFIG_PACKAGE_kmod-usb-gadget-ehci-debug=y
	CONFIG_PACKAGE_kmod-usb-gadget-eth=y
	CONFIG_PACKAGE_kmod-usb-gadget-mass-storage=y
	CONFIG_PACKAGE_kmod-usb-gadget-serial=y
	CONFIG_PACKAGE_umdns=y
	CONFIG_PACKAGE_kexec-tools=y