gnthibault

gnthibault

These commands are based on a askubuntu answer http://askubuntu.com/a/581497
To install gcc-6 (gcc-6.1.1), I had to do more stuff as shown below.
USE THOSE COMMANDS AT YOUR OWN RISK. I SHALL NOT BE RESPONSIBLE FOR ANYTHING.
ABSOLUTELY NO WARRANTY.

If you are still reading let's carry on with the code.

sudo apt-get update && \
sudo apt-get install build-essential software-properties-common -y && \
sudo add-apt-repository ppa:ubuntu-toolchain-r/test -y && \

gnthibault

# VERY IMPORTANT! After each kernel update or dkms rebuild the modules must be signed again with the script
# ~/.ssl/sign-all-modules.sh

# Place all files in ~/.ssl folder
mkdir ~/.ssl
cd ~/.ssl

# Generate custom keys with openssl
openssl req -new -x509 -newkey rsa:2048 -keyout MOK.priv -outform DER -out MOK.der -nodes  -subj "/CN=Owner/"

gnthibault

Create a Wi-Fi hotspot on Linux using nmcli

Original post : https://unix.stackexchange.com/a/310699

nmcli con add type wifi ifname wlan0 con-name Hostspot autoconnect yes ssid Hostspot
nmcli con modify Hostspot 802-11-wireless.mode ap 802-11-wireless.band bg ipv4.method shared
nmcli con modify Hostspot wifi-sec.key-mgmt wpa-psk
nmcli con modify Hostspot wifi-sec.psk "veryveryhardpassword1234"

gnthibault

I heard from GitHub Two-Factor Authentication](https://github.com/blog/1614-two-factor-authentication) nearly a couple of days ago when I was reading my RSS feed. I enabled it and couldn' push to any of my repositories anymore. Learn in this blog post how to fix it.

Two-Factor Authentication

"Is a process involving two stages to verify the identity of an entity trying to access services in a computer or in a network". Github solves this authentication with sending an SMS to a device which wants to push to their platform.

Enabling Two-Factor Authentication

gnthibault

Tornado HTTP web page with embedded Bokeh widget which communicates with other page of the same application

Tornado HTTP web page with embedded Bokeh widget which communicates with other page of the same application.

Features

• Full Tornado server
• Bokeh server is started from Tornado server and is executed in the same ioloop
• Embedded Bohek widget by autoload_server
• 2 web page communication:

gnthibault

Tornado HTTP web page with embedded Bokeh widget which communicates with other page of the same application

Tornado HTTP web page with embedded Bokeh widget which communicates with other page of the same application.

Features

• Full Tornado server
• Bokeh server is started from Tornado server and is executed in the same ioloop
• Embedded Bohek widget by autoload_server
• 2 web page communication:

gnthibault

# npm using https for git
git config --global url."https://github.com/".insteadOf git@github.com:
git config --global url."https://".insteadOf git://

# npm using git for https
git config --global url."git@github.com:".insteadOf https://github.com/
git config --global url."git://".insteadOf https://

gnthibault

gnthibault

What is the purpose of this guide?

I originally wanted to create bootable disks for UEFI (i)PXE booting, meaning I could directly boot premade disk images over the network, no matter what they may contain.

While this guide serves my purpose well, it's also generic enough to be extended to almost any use case. For example, you might use it as temporary or even portable storage, mountable across different operating systems, or you might use it as a disk image for a virtual machine.

DISCLAIMER: Be very careful with the commands listed below, as you could potentially not only cause data loss, but even prevent your operating system from booting, no matter how unlikely either of those may be. Pay attention to the commands, comments and differences between the guide and your local environment.

---