Skip to content

Instantly share code, notes, and snippets.

@gokrazy-bot
Created May 14, 2024 03:48
Show Gist options
  • Save gokrazy-bot/364f557478fe6cb2574e17b72affe9f8 to your computer and use it in GitHub Desktop.
Save gokrazy-bot/364f557478fe6cb2574e17b72affe9f8 to your computer and use it in GitHub Desktop.
gokrazy boot log
(drain) [Raspberry Pi 3 B] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
(drain) [Raspberry Pi 3 B] [ 0.000000] Linux version 6.8.7 (gokrazy@docker) (aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP PREEMPT Wed Mar 1 20:57:29 UTC 2017
(drain) [Raspberry Pi 3 B] [ 0.000000] KASLR enabled
(drain) [Raspberry Pi 3 B] [ 0.000000] random: crng init done
(drain) [Raspberry Pi 3 B] [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
(drain) [Raspberry Pi 3 B] [ 0.000000] efi: UEFI not found.
(drain) [Raspberry Pi 3 B] [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB
(drain) [Raspberry Pi 3 B] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
(drain) [Raspberry Pi 3 B] [ 0.000000] OF: reserved mem: 0x0000000037400000..0x000000003b3fffff (65536 KiB) map reusable linux,cma
(drain) [Raspberry Pi 3 B] [ 0.000000] NUMA: No NUMA configuration found
(drain) [Raspberry Pi 3 B] [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000003b3fffff]
(drain) [Raspberry Pi 3 B] [ 0.000000] NUMA: NODE_DATA [mem 0x372079c0-0x37209fff]
(drain) [Raspberry Pi 3 B] [ 0.000000] Zone ranges:
(drain) [Raspberry Pi 3 B] [ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff]
(drain) [Raspberry Pi 3 B] [ 0.000000] DMA32 empty
(drain) [Raspberry Pi 3 B] [ 0.000000] Normal empty
(drain) [Raspberry Pi 3 B] [ 0.000000] Movable zone start for each node
(drain) [Raspberry Pi 3 B] [ 0.000000] Early memory node ranges
(drain) [Raspberry Pi 3 B] [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
(drain) [Raspberry Pi 3 B] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
(drain) [Raspberry Pi 3 B] [ 0.000000] On node 0, zone DMA: 19456 pages in unavailable ranges
(drain) [Raspberry Pi 3 B] [ 0.000000] percpu: Embedded 22 pages/cpu s52008 r8192 d29912 u90112
(drain) [Raspberry Pi 3 B] [ 0.000000] Detected VIPT I-cache on CPU0
(drain) [Raspberry Pi 3 B] [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
(drain) [Raspberry Pi 3 B] [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
(drain) [Raspberry Pi 3 B] [ 0.000000] CPU features: detected: ARM erratum 843419
(drain) [Raspberry Pi 3 B] [ 0.000000] CPU features: detected: ARM erratum 845719
(drain) [Raspberry Pi 3 B] [ 0.000000] alternatives: applying boot alternatives
(drain) [Raspberry Pi 3 B] [ 0.000000] Kernel command line: dma.dmachans=0x7ff5 bcm2709.boardrev=0xa02082 bcm2709.serial=0xdd856a8f bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyS0,115200 root=PARTUUID=60c24cc1-f3f9-427a-8199-46b24e1d0001/PARTNROFF=2 init=/gokrazy/init rootwait panic=10 oops=panic
(drain) [Raspberry Pi 3 B] [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
(drain) [Raspberry Pi 3 B] [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
(drain) [Raspberry Pi 3 B] [ 0.000000] Fallback order for Node 0: 0
(drain) [Raspberry Pi 3 B] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 238896
(drain) [Raspberry Pi 3 B] [ 0.000000] Policy zone: DMA
(drain) [Raspberry Pi 3 B] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
(drain) [Raspberry Pi 3 B] [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
(drain) [Raspberry Pi 3 B] [ 0.000000] software IO TLB: area num 4.
(drain) [Raspberry Pi 3 B] [ 0.000000] software IO TLB: mapped [mem 0x0000000035f00000-0x0000000036000000] (1MB)
(drain) [Raspberry Pi 3 B] [ 0.000000] Memory: 829660K/970752K available (21888K kernel code, 5376K rwdata, 14344K rodata, 11520K init, 854K bss, 75556K reserved, 65536K cma-reserved)
(drain) [Raspberry Pi 3 B] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
(drain) [Raspberry Pi 3 B] [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
(drain) [Raspberry Pi 3 B] [ 0.000000] rcu: RCU event tracing is enabled.
(drain) [Raspberry Pi 3 B] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
(drain) [Raspberry Pi 3 B] [ 0.000000] Trampoline variant of Tasks RCU enabled.
(drain) [Raspberry Pi 3 B] [ 0.000000] Tracing variant of Tasks RCU enabled.
(drain) [Raspberry Pi 3 B] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
(drain) [Raspberry Pi 3 B] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
(drain) [Raspberry Pi 3 B] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
(drain) [Raspberry Pi 3 B] [ 0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
(drain) [Raspberry Pi 3 B] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
(drain) [Raspberry Pi 3 B] [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
(drain) [Raspberry Pi 3 B] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
(drain) [Raspberry Pi 3 B] [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
(drain) [Raspberry Pi 3 B] [ 0.000550] Console: colour dummy device 80x25
(drain) [Raspberry Pi 3 B] [ 0.000569] printk: legacy console [tty1] enabled
(drain) [Raspberry Pi 3 B] [ 0.001541] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
(drain) [Raspberry Pi 3 B] [ 0.001589] pid_max: default: 32768 minimum: 301
(drain) [Raspberry Pi 3 B] [ 0.001725] LSM: initializing lsm=capability,landlock,integrity
(drain) [Raspberry Pi 3 B] [ 0.001808] landlock: Up and running.
(drain) [Raspberry Pi 3 B] [ 0.001952] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
(drain) [Raspberry Pi 3 B] [ 0.002004] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
(drain) [Raspberry Pi 3 B] [ 0.003299] spectre-v4 mitigation disabled by command-line option
(drain) [Raspberry Pi 3 B] [ 0.004671] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
(drain) [Raspberry Pi 3 B] [ 0.004800] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
(drain) [Raspberry Pi 3 B] [ 0.005196] rcu: Hierarchical SRCU implementation.
(drain) [Raspberry Pi 3 B] [ 0.005222] rcu: Max phase no-delay instances is 1000.
(drain) [Raspberry Pi 3 B] [ 0.009208] EFI services will not be available.
(drain) [Raspberry Pi 3 B] [ 0.009646] smp: Bringing up secondary CPUs ...
(drain) [Raspberry Pi 3 B] [ 0.010339] Detected VIPT I-cache on CPU1
(drain) [Raspberry Pi 3 B] [ 0.010477] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
(drain) [Raspberry Pi 3 B] [ 0.011389] Detected VIPT I-cache on CPU2
(drain) [Raspberry Pi 3 B] [ 0.011494] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
(drain) [Raspberry Pi 3 B] [ 0.012485] Detected VIPT I-cache on CPU3
(drain) [Raspberry Pi 3 B] [ 0.012589] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
(drain) [Raspberry Pi 3 B] [ 0.012827] smp: Brought up 1 node, 4 CPUs
(drain) [Raspberry Pi 3 B] [ 0.012948] SMP: Total of 4 processors activated.
(drain) [Raspberry Pi 3 B] [ 0.012971] CPU: All CPU(s) started at EL2
(drain) [Raspberry Pi 3 B] [ 0.013007] CPU features: detected: 32-bit EL0 Support
(drain) [Raspberry Pi 3 B] [ 0.013028] CPU features: detected: 32-bit EL1 Support
(drain) [Raspberry Pi 3 B] [ 0.013054] CPU features: detected: CRC32 instructions
(drain) [Raspberry Pi 3 B] [ 0.013137] alternatives: applying
[Raspberry Pi 3 B] 2024/05/14 05:47:32 supervise.go:568: sending sigterm to all services
[Raspberry Pi 3 B] 2024/05/14 05:47:32 supervise.go:580: all services shut down
[Raspberry Pi 3 B] 2024/05/14 05:47:32 update.go:406: Unmounting /perm
[Raspberry Pi 3 B] [ 99.556635] EXT4-fs (mmcblk0p4): unmounting filesystem b67b7fd0-7d98-483d-ab58-b2a435518cd6.
[Raspberry Pi 3 B] 2024/05/14 05:47:32 update.go:353: Rebooting
[Raspberry Pi 3 B] [ 100.629475] kvm: exiting hardware virtualization
[Raspberry Pi 3 B] [ 100.636115] reboot: Restarting system
[Raspberry Pi 3 B] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[Raspberry Pi 3 B] [ 0.000000] Linux version 6.9.0 (gokrazy@docker) (aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP PREEMPT Wed Mar 1 20:57:29 UTC 2017
[Raspberry Pi 3 B] [ 0.000000] KASLR enabled
[Raspberry Pi 3 B] [ 0.000000] random: crng init done
[Raspberry Pi 3 B] [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[Raspberry Pi 3 B] [ 0.000000] efi: UEFI not found.
[Raspberry Pi 3 B] [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB
[Raspberry Pi 3 B] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[Raspberry Pi 3 B] [ 0.000000] OF: reserved mem: 0x0000000037400000..0x000000003b3fffff (65536 KiB) map reusable linux,cma
[Raspberry Pi 3 B] [ 0.000000] NUMA: No NUMA configuration found
[Raspberry Pi 3 B] [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000003b3fffff]
[Raspberry Pi 3 B] [ 0.000000] NUMA: NODE_DATA [mem 0x372139c0-0x37215fff]
[Raspberry Pi 3 B] [ 0.000000] Zone ranges:
[Raspberry Pi 3 B] [ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff]
[Raspberry Pi 3 B] [ 0.000000] DMA32 empty
[Raspberry Pi 3 B] [ 0.000000] Normal empty
[Raspberry Pi 3 B] [ 0.000000] Movable zone start for each node
[Raspberry Pi 3 B] [ 0.000000] Early memory node ranges
[Raspberry Pi 3 B] [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[Raspberry Pi 3 B] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
[Raspberry Pi 3 B] [ 0.000000] On node 0, zone DMA: 19456 pages in unavailable ranges
[Raspberry Pi 3 B] [ 0.000000] percpu: Embedded 24 pages/cpu s59240 r8192 d30872 u98304
[Raspberry Pi 3 B] [ 0.000000] Detected VIPT I-cache on CPU0
[Raspberry Pi 3 B] [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[Raspberry Pi 3 B] [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[Raspberry Pi 3 B] [ 0.000000] CPU features: detected: ARM erratum 843419
[Raspberry Pi 3 B] [ 0.000000] CPU features: detected: ARM erratum 845719
[Raspberry Pi 3 B] [ 0.000000] alternatives: applying boot alternatives
[Raspberry Pi 3 B] [ 0.000000] Kernel command line: dma.dmachans=0x7ff5 bcm2709.boardrev=0xa02082 bcm2709.serial=0xdd856a8f bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyS0,115200 root=PARTUUID=60c24cc1-f3f9-427a-8199-46b24e1d0001/PARTNROFF=1 init=/gokrazy/init rootwait panic=10 oops=panic
[Raspberry Pi 3 B] [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[Raspberry Pi 3 B] [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[Raspberry Pi 3 B] [ 0.000000] Fallback order for Node 0: 0
[Raspberry Pi 3 B] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 238896
[Raspberry Pi 3 B] [ 0.000000] Policy zone: DMA
[Raspberry Pi 3 B] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[Raspberry Pi 3 B] [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
[Raspberry Pi 3 B] [ 0.000000] software IO TLB: area num 4.
[Raspberry Pi 3 B] [ 0.000000] software IO TLB: mapped [mem 0x0000000035f1e000-0x000000003601e000] (1MB)
[Raspberry Pi 3 B] [ 0.000000] Memory: 828824K/970752K available (22016K kernel code, 5514K rwdata, 14548K rodata, 11712K init, 1000K bss, 76392K reserved, 65536K cma-reserved)
[Raspberry Pi 3 B] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Raspberry Pi 3 B] [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[Raspberry Pi 3 B] [ 0.000000] rcu: RCU event tracing is enabled.
[Raspberry Pi 3 B] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[Raspberry Pi 3 B] [ 0.000000] Trampoline variant of Tasks RCU enabled.
[Raspberry Pi 3 B] [ 0.000000] Tracing variant of Tasks RCU enabled.
[Raspberry Pi 3 B] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[Raspberry Pi 3 B] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[Raspberry Pi 3 B] [ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[Raspberry Pi 3 B] [ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[Raspberry Pi 3 B] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[Raspberry Pi 3 B] [ 0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
[Raspberry Pi 3 B] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[Raspberry Pi 3 B] [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Raspberry Pi 3 B] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Raspberry Pi 3 B] [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Raspberry Pi 3 B] [ 0.000562] Console: colour dummy device 80x25
[Raspberry Pi 3 B] [ 0.000580] printk: legacy console [tty1] enabled
[Raspberry Pi 3 B] [ 0.001587] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[Raspberry Pi 3 B] [ 0.001635] pid_max: default: 32768 minimum: 301
[Raspberry Pi 3 B] [ 0.001772] LSM: initializing lsm=capability,landlock
[Raspberry Pi 3 B] [ 0.001848] landlock: Up and running.
[Raspberry Pi 3 B] [ 0.001989] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[Raspberry Pi 3 B] [ 0.002042] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[Raspberry Pi 3 B] [ 0.005102] rcu: Hierarchical SRCU implementation.
[Raspberry Pi 3 B] [ 0.005141] rcu: Max phase no-delay instances is 1000.
[Raspberry Pi 3 B] [ 0.009429] EFI services will not be available.
[Raspberry Pi 3 B] [ 0.009893] smp: Bringing up secondary CPUs ...
[Raspberry Pi 3 B] [ 0.010589] Detected VIPT I-cache on CPU1
[Raspberry Pi 3 B] [ 0.010724] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[Raspberry Pi 3 B] [ 0.011708] Detected VIPT I-cache on CPU2
[Raspberry Pi 3 B] [ 0.011818] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[Raspberry Pi 3 B] [ 0.012867] Detected VIPT I-cache on CPU3
[Raspberry Pi 3 B] [ 0.012973] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[Raspberry Pi 3 B] [ 0.013268] smp: Brought up 1 node, 4 CPUs
[Raspberry Pi 3 B] [ 0.013393] SMP: Total of 4 processors activated.
[Raspberry Pi 3 B] [ 0.013415] CPU: All CPU(s) started at EL2
[Raspberry Pi 3 B] [ 0.013450] CPU features: detected: 32-bit EL0 Support
[Raspberry Pi 3 B] [ 0.013473] CPU features: detected: 32-bit EL1 Support
[Raspberry Pi 3 B] [ 0.013498] CPU features: detected: CRC32 instructions
[Raspberry Pi 3 B] [ 0.013585] alternatives: applying system-wide alternatives
[Raspberry Pi 3 B] [ 0.016858] devtmpfs: initialized
[Raspberry Pi 3 B] [ 0.028688] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[Raspberry Pi 3 B] [ 0.028764] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[Raspberry Pi 3 B] [ 0.031864] pinctrl core: initialized pinctrl subsystem
[Raspberry Pi 3 B] [ 0.034978] DMI not present or invalid.
[Raspberry Pi 3 B] [ 0.039074] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[Raspberry Pi 3 B] [ 0.044694] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[Raspberry Pi 3 B] [ 0.045676] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[Raspberry Pi 3 B] [ 0.046994] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[Raspberry Pi 3 B] [ 0.047653] audit: initializing netlink subsys (disabled)
[Raspberry Pi 3 B] [ 0.047966] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1
[Raspberry Pi 3 B] [ 0.050041] thermal_sys: Registered thermal governor 'step_wise'
[Raspberry Pi 3 B] [ 0.050052] thermal_sys: Registered thermal governor 'power_allocator'
[Raspberry Pi 3 B] [ 0.050184] cpuidle: using governor menu
[Raspberry Pi 3 B] [ 0.051321] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[Raspberry Pi 3 B] [ 0.051504] ASID allocator initialised with 32768 entries
[Raspberry Pi 3 B] [ 0.055879] Serial: AMBA PL011 UART driver
[Raspberry Pi 3 B] [ 0.085152] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[Raspberry Pi 3 B] [ 0.085211] Modules: 0 pages in range for non-PLT usage
[Raspberry Pi 3 B] [ 0.085219] Modules: 510528 pages in range for PLT usage
[Raspberry Pi 3 B] [ 0.086495] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[Raspberry Pi 3 B] [ 0.086553] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[Raspberry Pi 3 B] [ 0.086583] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[Raspberry Pi 3 B] [ 0.086608] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[Raspberry Pi 3 B] [ 0.086637] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[Raspberry Pi 3 B] [ 0.086662] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[Raspberry Pi 3 B] [ 0.086690] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[Raspberry Pi 3 B] [ 0.086716] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[Raspberry Pi 3 B] [ 0.087515] Demotion targets for Node 0: null
[Raspberry Pi 3 B] [ 0.089278] ACPI: Interpreter disabled.
[Raspberry Pi 3 B] [ 0.093334] iommu: Default domain type: Translated
[Raspberry Pi 3 B] [ 0.093366] iommu: DMA domain TLB invalidation policy: strict mode
[Raspberry Pi 3 B] [ 0.094070] SCSI subsystem initialized
[Raspberry Pi 3 B] [ 0.094673] usbcore: registered new interface driver usbfs
[Raspberry Pi 3 B] [ 0.094747] usbcore: registered new interface driver hub
[Raspberry Pi 3 B] [ 0.094820] usbcore: registered new device driver usb
[Raspberry Pi 3 B] [ 0.095109] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[Raspberry Pi 3 B] [ 0.096607] mc: Linux media interface: v0.10
[Raspberry Pi 3 B] [ 0.096699] videodev: Linux video capture interface: v2.00
[Raspberry Pi 3 B] [ 0.096815] pps_core: LinuxPPS API ver. 1 registered
[Raspberry Pi 3 B] [ 0.096840] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[Raspberry Pi 3 B] [ 0.096891] PTP clock support registered
[Raspberry Pi 3 B] [ 0.097138] EDAC MC: Ver: 3.0.0
[Raspberry Pi 3 B] [ 0.097895] scmi_core: SCMI protocol bus registered
[Raspberry Pi 3 B] [ 0.099505] FPGA manager framework
[Raspberry Pi 3 B] [ 0.099688] Advanced Linux Sound Architecture Driver Initialized.
[Raspberry Pi 3 B] [ 0.101782] vgaarb: loaded
[Raspberry Pi 3 B] [ 0.103128] clocksource: Switched to clocksource arch_sys_counter
[Raspberry Pi 3 B] [ 0.103574] VFS: Disk quotas dquot_6.6.0
[Raspberry Pi 3 B] [ 0.103653] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[Raspberry Pi 3 B] [ 0.104026] pnp: PnP ACPI: disabled
[Raspberry Pi 3 B] [ 0.115829] NET: Registered PF_INET protocol family
[Raspberry Pi 3 B] [ 0.116107] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[Raspberry Pi 3 B] [ 0.117960] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[Raspberry Pi 3 B] [ 0.118030] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[Raspberry Pi 3 B] [ 0.118136] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[Raspberry Pi 3 B] [ 0.118279] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[Raspberry Pi 3 B] [ 0.118662] TCP: Hash tables configured (established 8192 bind 8192)
[Raspberry Pi 3 B] [ 0.118888] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[Raspberry Pi 3 B] [ 0.118963] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[Raspberry Pi 3 B] [ 0.119219] NET: Registered PF_UNIX/PF_LOCAL protocol family
[Raspberry Pi 3 B] [ 0.119832] RPC: Registered named UNIX socket transport module.
[Raspberry Pi 3 B] [ 0.119863] RPC: Registered udp transport module.
[Raspberry Pi 3 B] [ 0.119885] RPC: Registered tcp transport module.
[Raspberry Pi 3 B] [ 0.119907] RPC: Registered tcp-with-tls transport module.
[Raspberry Pi 3 B] [ 0.119929] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Raspberry Pi 3 B] [ 0.122343] PCI: CLS 0 bytes, default 64
[Raspberry Pi 3 B] [ 0.129249] kvm [1]: nv: 477 coarse grained trap handlers
[Raspberry Pi 3 B] [ 0.129904] kvm [1]: IPA Size Limit: 40 bits
[Raspberry Pi 3 B] [ 0.135501] kvm [1]: Hyp nVHE mode initialized successfully
[Raspberry Pi 3 B] [ 0.137657] Initialise system trusted keyrings
[Raspberry Pi 3 B] [ 0.137957] workingset: timestamp_bits=42 max_order=18 bucket_order=0
[Raspberry Pi 3 B] [ 0.138474] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[Raspberry Pi 3 B] [ 0.138896] NFS: Registering the id_resolver key type
[Raspberry Pi 3 B] [ 0.138947] Key type id_resolver registered
[Raspberry Pi 3 B] [ 0.138971] Key type id_legacy registered
[Raspberry Pi 3 B] [ 0.139025] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Raspberry Pi 3 B] [ 0.139056] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[Raspberry Pi 3 B] [ 0.139347] fuse: init (API version 7.40)
[Raspberry Pi 3 B] [ 0.139586] 9p: Installing v9fs 9p2000 file system support
[Raspberry Pi 3 B] [ 0.224803] Key type asymmetric registered
[Raspberry Pi 3 B] [ 0.224832] Asymmetric key parser 'x509' registered
[Raspberry Pi 3 B] [ 0.224935] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[Raspberry Pi 3 B] [ 0.224970] io scheduler mq-deadline registered
[Raspberry Pi 3 B] [ 0.224998] io scheduler kyber registered
[Raspberry Pi 3 B] [ 0.225068] io scheduler bfq registered
[Raspberry Pi 3 B] [ 0.250484] simple-framebuffer 3eaf0000.framebuffer: framebuffer at 0x3eaf0000, 0x10a800 bytes
[Raspberry Pi 3 B] [ 0.250549] simple-framebuffer 3eaf0000.framebuffer: format=a8r8g8b8, mode=656x416x32, linelength=2624
[Raspberry Pi 3 B] [ 0.253609] Console: switching to colour frame buffer device 82x26
[Raspberry Pi 3 B] [ 0.256319] simple-framebuffer 3eaf0000.framebuffer: fb0: simplefb registered!
[Raspberry Pi 3 B] [ 0.258006] IPMI message handler: version 39.2
[Raspberry Pi 3 B] [ 0.259650] ipmi device interface
[Raspberry Pi 3 B] [ 0.261448] ipmi_ssif: IPMI SSIF Interface driver
[Raspberry Pi 3 B] [ 0.319180] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[Raspberry Pi 3 B] [ 0.323449] printk: legacy console [ttyS0] disabled
[Raspberry Pi 3 B] [ 0.325562] 3f215040.serial: ttyS0 at MMIO 0x3f215040 (irq = 71, base_baud = 50000000) is a 16550
[Raspberry Pi 3 B] [ 0.328689] printk: legacy console [ttyS0] enabled
[Raspberry Pi 3 B] [ 1.397778] Serial: AMBA driver
[Raspberry Pi 3 B] [ 1.403696] msm_serial: driver initialized
[Raspberry Pi 3 B] [ 1.410030] SuperH (H)SCI(F) driver initialized
[Raspberry Pi 3 B] [ 1.416436] STM32 USART driver initialized
[Raspberry Pi 3 B] [ 1.424222] bcm2835-rng 3f104000.rng: hwrng registered
[Raspberry Pi 3 B] [ 1.453154] loop: module loaded
[Raspberry Pi 3 B] [ 1.460633] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[Raspberry Pi 3 B] [ 1.471598] megasas: 07.727.03.00-rc1
[Raspberry Pi 3 B] [ 1.480841] SPI driver spidev has no spi_device_id for brcm,bcm2835-spi
[Raspberry Pi 3 B] [ 1.497965] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[Raspberry Pi 3 B] [ 1.508929] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[Raspberry Pi 3 B] [ 1.531260] tun: Universal TUN/TAP device driver, 1.6
[Raspberry Pi 3 B] [ 1.540352] thunder_xcv, ver 1.0
[Raspberry Pi 3 B] [ 1.545244] thunder_bgx, ver 1.0
[Raspberry Pi 3 B] [ 1.550036] nicpf, ver 1.0
[Raspberry Pi 3 B] [ 1.554252] nicvf, ver 1.0
[Raspberry Pi 3 B] [ 1.558523] tulip: tulip: unknown CPU architecture, using default csr0
[Raspberry Pi 3 B] [ 1.569155] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[Raspberry Pi 3 B] [ 1.577930] hns3: Copyright (c) 2017 Huawei Corporation.
[Raspberry Pi 3 B] [ 1.584807] hclge is initializing
[Raspberry Pi 3 B] [ 1.589867] e100: Intel(R) PRO/100 Network Driver
[Raspberry Pi 3 B] [ 1.596073] e100: Copyright(c) 1999-2006 Intel Corporation
[Raspberry Pi 3 B] [ 1.603138] e1000: Intel(R) PRO/1000 Network Driver
[Raspberry Pi 3 B] [ 1.609523] e1000: Copyright (c) 1999-2006 Intel Corporation.
[Raspberry Pi 3 B] [ 1.616849] e1000e: Intel(R) PRO/1000 Network Driver
[Raspberry Pi 3 B] [ 1.623305] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[Raspberry Pi 3 B] [ 1.630734] igb: Intel(R) Gigabit Ethernet Network Driver
[Raspberry Pi 3 B] [ 1.637581] igb: Copyright (c) 2007-2014 Intel Corporation.
[Raspberry Pi 3 B] [ 1.644624] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[Raspberry Pi 3 B] [ 1.652326] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[Raspberry Pi 3 B] [ 1.660311] sky2: driver version 1.30
[Raspberry Pi 3 B] [ 1.670194] usbcore: registered new device driver r8152-cfgselector
[Raspberry Pi 3 B] [ 1.677906] usbcore: registered new interface driver r8152
[Raspberry Pi 3 B] [ 1.684785] usbcore: registered new interface driver lan78xx
[Raspberry Pi 3 B] [ 1.691860] usbcore: registered new interface driver asix
[Raspberry Pi 3 B] [ 1.698626] usbcore: registered new interface driver ax88179_178a
[Raspberry Pi 3 B] [ 1.706125] usbcore: registered new interface driver cdc_ether
[Raspberry Pi 3 B] [ 1.713296] usbcore: registered new interface driver smsc95xx
[Raspberry Pi 3 B] [ 1.720334] usbcore: registered new interface driver net1080
[Raspberry Pi 3 B] [ 1.727231] usbcore: registered new interface driver cdc_subset
[Raspberry Pi 3 B] [ 1.734336] usbcore: registered new interface driver zaurus
[Raspberry Pi 3 B] [ 1.741082] usbcore: registered new interface driver cdc_ncm
[Raspberry Pi 3 B] [ 1.747876] usbcore: registered new interface driver lg-vl600
[Raspberry Pi 3 B] [ 1.754716] usbcore: registered new interface driver r8153_ecm
[Raspberry Pi 3 B] [ 1.762121] VFIO - User Level meta-driver version: 0.3
[Raspberry Pi 3 B] [ 1.774149] usbcore: registered new interface driver cdc_acm
[Raspberry Pi 3 B] [ 1.780855] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[Raspberry Pi 3 B] [ 1.790883] usbcore: registered new interface driver usblp
[Raspberry Pi 3 B] [ 1.797475] usbcore: registered new interface driver usb-storage
[Raspberry Pi 3 B] [ 1.804654] usbcore: registered new interface driver cp210x
[Raspberry Pi 3 B] [ 1.811273] usbserial: USB Serial support registered for cp210x
[Raspberry Pi 3 B] [ 1.818221] usbcore: registered new interface driver ftdi_sio
[Raspberry Pi 3 B] [ 1.825013] usbserial: USB Serial support registered for FTDI USB Serial Device
[Raspberry Pi 3 B] [ 1.840236] i2c_dev: i2c /dev entries driver
[Raspberry Pi 3 B] [ 1.847765] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property
[Raspberry Pi 3 B] [ 1.861060] Driver for 1-wire Dallas network protocol.
[Raspberry Pi 3 B] [ 1.876225] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[Raspberry Pi 3 B] [ 1.890218] sdhci: Secure Digital Host Controller Interface driver
[Raspberry Pi 3 B] [ 1.897804] sdhci: Copyright(c) Pierre Ossman
[Raspberry Pi 3 B] [ 1.905051] Synopsys Designware Multimedia Card Interface Driver
[Raspberry Pi 3 B] [ 1.914503] sdhci-pltfm: SDHCI platform and OF driver helper
[Raspberry Pi 3 B] [ 1.926229] ledtrig-cpu: registered to indicate activity on CPUs
[Raspberry Pi 3 B] [ 1.937478] usbcore: registered new interface driver usbhid
[Raspberry Pi 3 B] [ 1.944653] usbhid: USB HID core driver
[Raspberry Pi 3 B] [ 1.952667] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Raspberry Pi 3 B] [ 1.965641] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[Raspberry Pi 3 B] [ 1.989967] Initializing XFRM netlink socket
[Raspberry Pi 3 B] [ 1.995948] NET: Registered PF_INET6 protocol family
[Raspberry Pi 3 B] [ 1.999182] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1)
[Raspberry Pi 3 B] [ 2.002146] Segment Routing with IPv6
[Raspberry Pi 3 B] [ 2.015609] In-situ OAM (IOAM) with IPv6
[Raspberry Pi 3 B] [ 2.021271] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[Raspberry Pi 3 B] [ 2.029872] NET: Registered PF_PACKET protocol family
[Raspberry Pi 3 B] [ 2.036683] 9pnet: Installing 9P2000 support
[Raspberry Pi 3 B] [ 2.042567] Key type dns_resolver registered
[Raspberry Pi 3 B] [ 2.074211] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[Raspberry Pi 3 B] [ 2.086596] registered taskstats version 1
[Raspberry Pi 3 B] [ 2.092483] Loading compiled-in X.509 certificates
[Raspberry Pi 3 B] [ 2.100727] mmc0: host does not support reading read-only switch, assuming write-enable
[Raspberry Pi 3 B] [ 2.113653] mmc0: new high speed SDHC card at address 0001
[Raspberry Pi 3 B] [ 2.122039] mmcblk0: mmc0:0001 00000 29.8 GiB
[Raspberry Pi 3 B] [ 2.124605] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 99, base_baud = 0) is a PL011 rev2
[Raspberry Pi 3 B] [ 2.140492] serial serial0: tty port ttyAMA0 registered
[Raspberry Pi 3 B] [ 2.145315] mmcblk0: p1 p2 p3 p4
[Raspberry Pi 3 B] [ 2.150629] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-05-03T19:33:49
[Raspberry Pi 3 B] [ 2.187284] Console: switching to colour dummy device 80x25
[Raspberry Pi 3 B] [ 2.196506] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops)
[Raspberry Pi 3 B] [ 2.208046] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops)
[Raspberry Pi 3 B] [ 2.214558] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops)
[Raspberry Pi 3 B] [ 2.220894] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops)
[Raspberry Pi 3 B] [ 2.227235] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops)
[Raspberry Pi 3 B] [ 2.234216] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops)
[Raspberry Pi 3 B] [ 2.241207] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops)
[Raspberry Pi 3 B] [ 2.248164] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops)
[Raspberry Pi 3 B] [ 2.256275] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[Raspberry Pi 3 B] [ 2.299926] Console: switching to colour frame buffer device 90x30
[Raspberry Pi 3 B] [ 2.323723] vc4-drm soc:gpu: [drm] fb0: vc4drmfb frame buffer device
[Raspberry Pi 3 B] [ 2.861227] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator
[Raspberry Pi 3 B] [ 2.869412] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator
[Raspberry Pi 3 B] [ 2.929473] dwc2 3f980000.usb: DWC OTG Controller
[Raspberry Pi 3 B] [ 2.934976] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1
[Raspberry Pi 3 B] [ 2.942861] dwc2 3f980000.usb: irq 51, io mem 0x3f980000
[Raspberry Pi 3 B] [ 2.949544] hub 1-0:1.0: USB hub found
[Raspberry Pi 3 B] [ 2.954050] hub 1-0:1.0: 1 port detected
[Raspberry Pi 3 B] [ 2.967964] sdhci-iproc 3f300000.mmc: allocated mmc-pwrseq
[Raspberry Pi 3 B] [ 2.985310] bcm2835-audio bcm2835-audio: card created with 8 channels
[Raspberry Pi 3 B] [ 2.993371] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[Raspberry Pi 3 B] [ 3.003256] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[Raspberry Pi 3 B] [ 3.007194] mmc1: SDHCI controller on 3f300000.mmc [3f300000.mmc] using PIO
[Raspberry Pi 3 B] [ 3.009797] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[Raspberry Pi 3 B] [ 3.025512] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[Raspberry Pi 3 B] [ 3.026174] clk: Disabling unused clocks
[Raspberry Pi 3 B] [ 3.034263] cfg80211: failed to load regulatory.db
[Raspberry Pi 3 B] [ 3.038489] PM: genpd: Disabling unused power domains
[Raspberry Pi 3 B] [ 3.051850] ALSA device list:
[Raspberry Pi 3 B] [ 3.055659] #0: vc4-hdmi
[Raspberry Pi 3 B] [ 3.059201] #1: bcm2835 Headphones
[Raspberry Pi 3 B] [ 3.068378] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[Raspberry Pi 3 B] [ 3.077316] devtmpfs: mounted
[Raspberry Pi 3 B] [ 3.088527] Freeing unused kernel memory: 11712K
[Raspberry Pi 3 B] [ 3.094089] Run /gokrazy/init as init process
[Raspberry Pi 3 B] [ 3.166796] mmc1: new high speed SDIO card at address 0001
[Raspberry Pi 3 B] [ 3.255151] usb 1-1: new high-speed USB device number 2 using dwc2
[Raspberry Pi 3 B] gokrazy build timestamp 2024-05-14T03:46:08Z
[Raspberry Pi 3 B] 1970/01/01 00:00:03 gokrazy.go:76: found hardware watchdog "Broadcom BCM2835 Wat[ 3.437802] EXT4-fs (mmcblk0p4): mounted filesystem b67b7fd0-7d98-483d-ab58-b2a435518cd6 r/w with ordered data mode. Quota mode: none.
[Raspberry Pi 3 B] chdog timer" with timeout 15s, pinging...
[Raspberry Pi 3 B] hostname "bakery"
[Raspberry Pi 3 B] gokrazy device model Raspberry Pi 3 M[ 3.467843] hub 1-1:1.0: USB hub found
[Raspberry Pi 3 B] odel B Rev 1.2
[Raspberry Pi 3 B] [ 3.472712] hub 1-1:1.0: 5 ports detected
[Raspberry Pi 3 B] 1970/01/01 00:00:03 gokrazy.go:440: getting EEPROM version: RECOVERY.000 not found, assuming update unsuccessful
[Raspberry Pi 3 B] 1970/01/01 00:00:03 listeners.go:78: now listening on 127.0.0.1:80
[Raspberry Pi 3 B] 1970/01/01 00:00:03 listeners.go:78: now listening on [::1]:80
[Raspberry Pi 3 B] [ 3.763173] usb 1-1.1: new high-speed USB device number 3 using dwc2
[Raspberry Pi 3 B] [ 3.870883] smsc95xx v2.0.0
[Raspberry Pi 3 B] [ 3.968942] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=112)
[Raspberry Pi 3 B] [ 3.981054] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:85:6a:8f
[Raspberry Pi 3 B] 1970/01/01 00:00:04 randomd.go:38: seeding RNG from /perm/random.seed
[Raspberry Pi 3 B] timestamps: boot: 2024-05-14 03:46:50 +0000 UTC, root: 2024-05-14 03:46:50 +0000 UTC (boot=1715658410 root=1715658410)
[Raspberry Pi 3 B] [ 5.391283] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Raspberry Pi 3 B] [ 5.394330] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off
[Raspberry Pi 3 B] 1970/01/01 00:00:05 listeners.go:78: now listening on 10.0.0.189:80
[Raspberry Pi 3 B] 1970/01/01 00:00:05 listeners.go:75: listen: listen tcp [fe80::ba27:ebff:fe85:6a8f%eth0]:80: bind: cannot assign requested address
[Raspberry Pi 3 B] 1970/01/01 00:00:05 listeners.go:75: listen: listen tcp [fe80::ba27:ebff:fe85:6a8f%eth0]:80: bind: cannot assign requested address
[Raspberry Pi 3 B] 2024/05/14 03:47:46 listeners.go:78: now listening on [fe80::ba27:ebff:fe85:6a8f%eth0]:80
[Raspberry Pi 3 B] [ 7.517132] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[Raspberry Pi 3 B] [ 7.529120] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.bin failed with error -2
[Raspberry Pi 3 B] [ 7.747859] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[Raspberry Pi 3 B] [ 7.757828] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Mar 30 2021 01:12:21 version 7.45.98.118 (7d96287 CY) FWID 01-32059766
[Raspberry Pi 3 B] 2024/05/14 03:47:49 listeners.go:78: now listening on [fe80::ba27:ebff:fed0:3fda%wlan0]:80
[Raspberry Pi 3 B] 2024/05/14 03:47:51 listeners.go:78: now listening on [fd7c:ae21:eb36:0:ba27:ebff:fed0:3fda]:80
[Raspberry Pi 3 B] 2024/05/14 03:48:07 listeners.go:78: now listening on 192.168.1.211:80
[Raspberry Pi 3 B] 2024/05/14 03:48:07 listeners.go:114: no longer listening on 192.168.1.211:80
[Raspberry Pi 3 B] 2024/05/14 03:48:07 listeners.go:106: serving on 192.168.1.211:80: http: Server closed
[Raspberry Pi 3 B] 2024/05/14 03:48:26 listeners.go:78: now listening on 192.168.1.211:80
[Raspberry Pi 3 B] 2024/05/14 03:48:27 listeners.go:114: no longer listening on 192.168.1.211:80
[Raspberry Pi 3 B] 2024/05/14 03:48:27 listeners.go:106: serving on 192.168.1.211:80: http: Server closed
[Raspberry Pi 3 B] [ 47.683452] bake: SUCCESS
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment