Skip to content

Instantly share code, notes, and snippets.

@gokrazy-bot

gokrazy-bot/boot-log-2023-11-21T03:46:02Z Secret

Created November 21, 2023 03:46
Show Gist options
  • Save gokrazy-bot/bb7d683d841fdac1e9988dfc2957562a to your computer and use it in GitHub Desktop.
Save gokrazy-bot/bb7d683d841fdac1e9988dfc2957562a to your computer and use it in GitHub Desktop.
Download ZIP
gokrazy boot log
Raw
boot-log-2023-11-21T03:46:02Z
(drain) [Raspberry Pi 3 B+] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
(drain) [Raspberry Pi 3 B+] [ 0.000000] Linux version 6.5.6 (gokrazy@docker) (aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP PREEMPT Wed Mar 1 20:57:29 UTC 2017
(drain) [Raspberry Pi 3 B+] [ 0.000000] KASLR enabled
(drain) [Raspberry Pi 3 B+] [ 0.000000] random: crng init done
(drain) [Raspberry Pi 3 B+] [ 0.000000] Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
(drain) [Raspberry Pi 3 B+] [ 0.000000] efi: UEFI not found.
(drain) [Raspberry Pi 3 B+] [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB
(drain) [Raspberry Pi 3 B+] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
(drain) [Raspberry Pi 3 B+] [ 0.000000] OF: reserved mem: 0x0000000037400000..0x000000003b3fffff (65536 KiB) map reusable linux,cma
(drain) [Raspberry Pi 3 B+] [ 0.000000] NUMA: No NUMA configuration found
(drain) [Raspberry Pi 3 B+] [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000003b3fffff]
(drain) [Raspberry Pi 3 B+] [ 0.000000] NUMA: NODE_DATA [mem 0x372099c0-0x3720bfff]
(drain) [Raspberry Pi 3 B+] [ 0.000000] Zone ranges:
(drain) [Raspberry Pi 3 B+] [ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff]
(drain) [Raspberry Pi 3 B+] [ 0.000000] DMA32 empty
(drain) [Raspberry Pi 3 B+] [ 0.000000] Normal empty
(drain) [Raspberry Pi 3 B+] [ 0.000000] Movable zone start for each node
(drain) [Raspberry Pi 3 B+] [ 0.000000] Early memory node ranges
(drain) [Raspberry Pi 3 B+] [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
(drain) [Raspberry Pi 3 B+] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
(drain) [Raspberry Pi 3 B+] [ 0.000000] On node 0, zone DMA: 19456 pages in unavailable ranges
(drain) [Raspberry Pi 3 B+] [ 0.000000] percpu: Embedded 22 pages/cpu s50984 r8192 d30936 u90112
(drain) [Raspberry Pi 3 B+] [ 0.000000] Detected VIPT I-cache on CPU0
(drain) [Raspberry Pi 3 B+] [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
(drain) [Raspberry Pi 3 B+] [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
(drain) [Raspberry Pi 3 B+] [ 0.000000] CPU features: detected: ARM erratum 843419
(drain) [Raspberry Pi 3 B+] [ 0.000000] CPU features: detected: ARM erratum 845719
(drain) [Raspberry Pi 3 B+] [ 0.000000] alternatives: applying boot alternatives
(drain) [Raspberry Pi 3 B+] [ 0.000000] Kernel command line: video=Composite-1:720x480@60i,margin_left=32,margin_right=32,margin_top=32,margin_bottom=32 dma.dmachans=0x7ff5 bcm2709.boardrev=0xa020d3 bcm2709.serial=0x46461240 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=29 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyS0,115200 root=PARTUUID=60c24cc1-f3f9-427a-8199-557c925d0001/PARTNROFF=2 init=/gokrazy/init rootwait panic=10 oops=panic
(drain) [Raspberry Pi 3 B+] [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
(drain) [Raspberry Pi 3 B+] [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
(drain) [Raspberry Pi 3 B+] [ 0.000000] Fallback order for Node 0: 0
(drain) [Raspberry Pi 3 B+] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 238896
(drain) [Raspberry Pi 3 B+] [ 0.000000] Policy zone: DMA
(drain) [Raspberry Pi 3 B+] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
(drain) [Raspberry Pi 3 B+] [ 0.000000] software IO TLB: area num 4.
(drain) [Raspberry Pi 3 B+] [ 0.000000] software IO TLB: mapped [mem 0x0000000032000000-0x0000000036000000] (64MB)
(drain) [Raspberry Pi 3 B+] [ 0.000000] Memory: 767276K/970752K available (21376K kernel code, 4906K rwdata, 13536K rodata, 10688K init, 639K bss, 137940K reserved, 65536K cma-reserved)
(drain) [Raspberry Pi 3 B+] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
(drain) [Raspberry Pi 3 B+] [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
(drain) [Raspberry Pi 3 B+] [ 0.000000] rcu: RCU event tracing is enabled.
(drain) [Raspberry Pi 3 B+] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
(drain) [Raspberry Pi 3 B+] [ 0.000000] Trampoline variant of Tasks RCU enabled.
(drain) [Raspberry Pi 3 B+] [ 0.000000] Tracing variant of Tasks RCU enabled.
(drain) [Raspberry Pi 3 B+] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
(drain) [Raspberry Pi 3 B+] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
(drain) [Raspberry Pi 3 B+] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
(drain) [Raspberry Pi 3 B+] [ 0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
(drain) [Raspberry Pi 3 B+] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
(drain) [Raspberry Pi 3 B+] [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
(drain) [Raspberry Pi 3 B+] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
(drain) [Raspberry Pi 3 B+] [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
(drain) [Raspberry Pi 3 B+] [ 0.000547] Console: colour dummy device 80x25
(drain) [Raspberry Pi 3 B+] [ 0.000563] printk: console [tty1] enabled
(drain) [Raspberry Pi 3 B+] [ 0.001531] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
(drain) [Raspberry Pi 3 B+] [ 0.001578] pid_max: default: 32768 minimum: 301
(drain) [Raspberry Pi 3 B+] [ 0.001715] LSM: initializing lsm=capability,landlock,integrity
(drain) [Raspberry Pi 3 B+] [ 0.001795] landlock: Up and running.
(drain) [Raspberry Pi 3 B+] [ 0.001924] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
(drain) [Raspberry Pi 3 B+] [ 0.001974] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
(drain) [Raspberry Pi 3 B+] [ 0.004472] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
(drain) [Raspberry Pi 3 B+] [ 0.004626] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
(drain) [Raspberry Pi 3 B+] [ 0.004950] rcu: Hierarchical SRCU implementation.
(drain) [Raspberry Pi 3 B+] [ 0.004975] rcu: Max phase no-delay instances is 1000.
(drain) [Raspberry Pi 3 B+] [ 0.008919] EFI services will not be available.
(drain) [Raspberry Pi 3 B+] [ 0.009347] smp: Bringing up secondary CPUs ...
(drain) [Raspberry Pi 3 B+] [ 0.010066] Detected VIPT I-cache on CPU1
(drain) [Raspberry Pi 3 B+] [ 0.010200] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
(drain) [Raspberry Pi 3 B+] [ 0.011079] Detected VIPT I-cache on CPU2
(drain) [Raspberry Pi 3 B+] [ 0.011178] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
(drain) [Raspberry Pi 3 B+] [ 0.011996] Detected VIPT I-cache on CPU3
(drain) [Raspberry Pi 3 B+] [ 0.012092] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
(drain) [Raspberry Pi 3 B+] [ 0.012380] smp: Brought up 1 node, 4 CPUs
(drain) [Raspberry Pi 3 B+] [ 0.012500] SMP: Total of 4 processors activated.
(drain) [Raspberry Pi 3 B+] [ 0.012523] CPU features: detected: 32-bit EL0 Support
(drain) [Raspberry Pi 3 B+] [ 0.012543] CPU features: detected: 32-bit EL1 Support
(drain) [Raspberry Pi 3 B+] [ 0.012566] CPU features: detected: CRC32 instructions
(drain) [Raspberry Pi 3 B+] [ 0.012697] CPU: All CPU(s) started at
[Raspberry Pi 3 B+] 2023/11/21 04:45:02 supervise.go:568: sending sigterm to all services
[Raspberry Pi 3 B+] 2023/11/21 04:45:02 randomd.go:92: persisting random seed failed: open /perm/random.seed: read-only file system
[Raspberry Pi 3 B+] 2023/11/21 04:45:02 supervise.go:580: all services shut down
[Raspberry Pi 3 B+] 2023/11/21 04:45:02 update.go:406: Unmounting /perm
[Raspberry Pi 3 B+] 2023/11/21 04:45:02 update.go:408: unmounting /perm failed: invalid argument
[Raspberry Pi 3 B+] 2023/11/21 04:45:02 update.go:353: Rebooting
[Raspberry Pi 3 B+] [ 190.863830] kvm: exiting hardware virtualization
[Raspberry Pi 3 B+] [ 190.870385] reboot: Restarting system
[Raspberry Pi 3 B+] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[Raspberry Pi 3 B+] [ 0.000000] Linux version 6.6.2 (gokrazy@docker) (aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP PREEMPT Wed Mar 1 20:57:29 UTC 2017
[Raspberry Pi 3 B+] [ 0.000000] KASLR enabled
[Raspberry Pi 3 B+] [ 0.000000] random: crng init done
[Raspberry Pi 3 B+] [ 0.000000] Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[Raspberry Pi 3 B+] [ 0.000000] efi: UEFI not found.
[Raspberry Pi 3 B+] [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB
[Raspberry Pi 3 B+] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[Raspberry Pi 3 B+] [ 0.000000] OF: reserved mem: 0x0000000037400000..0x000000003b3fffff (65536 KiB) map reusable linux,cma
[Raspberry Pi 3 B+] [ 0.000000] NUMA: No NUMA configuration found
[Raspberry Pi 3 B+] [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000003b3fffff]
[Raspberry Pi 3 B+] [ 0.000000] NUMA: NODE_DATA [mem 0x372099c0-0x3720bfff]
[Raspberry Pi 3 B+] [ 0.000000] Zone ranges:
[Raspberry Pi 3 B+] [ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff]
[Raspberry Pi 3 B+] [ 0.000000] DMA32 empty
[Raspberry Pi 3 B+] [ 0.000000] Normal empty
[Raspberry Pi 3 B+] [ 0.000000] Movable zone start for each node
[Raspberry Pi 3 B+] [ 0.000000] Early memory node ranges
[Raspberry Pi 3 B+] [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[Raspberry Pi 3 B+] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
[Raspberry Pi 3 B+] [ 0.000000] On node 0, zone DMA: 19456 pages in unavailable ranges
[Raspberry Pi 3 B+] [ 0.000000] percpu: Embedded 22 pages/cpu s51304 r8192 d30616 u90112
[Raspberry Pi 3 B+] [ 0.000000] Detected VIPT I-cache on CPU0
[Raspberry Pi 3 B+] [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[Raspberry Pi 3 B+] [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[Raspberry Pi 3 B+] [ 0.000000] CPU features: detected: ARM erratum 843419
[Raspberry Pi 3 B+] [ 0.000000] CPU features: detected: ARM erratum 845719
[Raspberry Pi 3 B+] [ 0.000000] alternatives: applying boot alternatives
[Raspberry Pi 3 B+] [ 0.000000] Kernel command line: dma.dmachans=0x7ff5 bcm2709.boardrev=0xa020d3 bcm2709.serial=0x46461240 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=29 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyS0,115200 root=PARTUUID=60c24cc1-f3f9-427a-8199-557c925d0001/PARTNROFF=2 init=/gokrazy/init rootwait panic=10 oops=panic
[Raspberry Pi 3 B+] [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[Raspberry Pi 3 B+] [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[Raspberry Pi 3 B+] [ 0.000000] Fallback order for Node 0: 0
[Raspberry Pi 3 B+] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 238896
[Raspberry Pi 3 B+] [ 0.000000] Policy zone: DMA
[Raspberry Pi 3 B+] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[Raspberry Pi 3 B+] [ 0.000000] software IO TLB: area num 4.
[Raspberry Pi 3 B+] [ 0.000000] software IO TLB: mapped [mem 0x0000000032000000-0x0000000036000000] (64MB)
[Raspberry Pi 3 B+] [ 0.000000] Memory: 766960K/970752K available (21504K kernel code, 4952K rwdata, 13636K rodata, 10752K init, 629K bss, 138256K reserved, 65536K cma-reserved)
[Raspberry Pi 3 B+] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Raspberry Pi 3 B+] [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[Raspberry Pi 3 B+] [ 0.000000] rcu: RCU event tracing is enabled.
[Raspberry Pi 3 B+] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[Raspberry Pi 3 B+] [ 0.000000] Trampoline variant of Tasks RCU enabled.
[Raspberry Pi 3 B+] [ 0.000000] Tracing variant of Tasks RCU enabled.
[Raspberry Pi 3 B+] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[Raspberry Pi 3 B+] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[Raspberry Pi 3 B+] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[Raspberry Pi 3 B+] [ 0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
[Raspberry Pi 3 B+] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[Raspberry Pi 3 B+] [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Raspberry Pi 3 B+] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Raspberry Pi 3 B+] [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Raspberry Pi 3 B+] [ 0.000545] Console: colour dummy device 80x25
[Raspberry Pi 3 B+] [ 0.000562] printk: console [tty1] enabled
[Raspberry Pi 3 B+] [ 0.001524] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[Raspberry Pi 3 B+] [ 0.001571] pid_max: default: 32768 minimum: 301
[Raspberry Pi 3 B+] [ 0.001706] LSM: initializing lsm=capability,landlock,integrity
[Raspberry Pi 3 B+] [ 0.001787] landlock: Up and running.
[Raspberry Pi 3 B+] [ 0.001920] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[Raspberry Pi 3 B+] [ 0.001971] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[Raspberry Pi 3 B+] [ 0.004551] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[Raspberry Pi 3 B+] [ 0.004687] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[Raspberry Pi 3 B+] [ 0.005026] rcu: Hierarchical SRCU implementation.
[Raspberry Pi 3 B+] [ 0.005051] rcu: Max phase no-delay instances is 1000.
[Raspberry Pi 3 B+] [ 0.008954] EFI services will not be available.
[Raspberry Pi 3 B+] [ 0.009400] smp: Bringing up secondary CPUs ...
[Raspberry Pi 3 B+] [ 0.010139] Detected VIPT I-cache on CPU1
[Raspberry Pi 3 B+] [ 0.010277] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[Raspberry Pi 3 B+] [ 0.011205] Detected VIPT I-cache on CPU2
[Raspberry Pi 3 B+] [ 0.011307] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[Raspberry Pi 3 B+] [ 0.012148] Detected VIPT I-cache on CPU3
[Raspberry Pi 3 B+] [ 0.012242] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[Raspberry Pi 3 B+] [ 0.012648] smp: Brought up 1 node, 4 CPUs
[Raspberry Pi 3 B+] [ 0.012770] SMP: Total of 4 processors activated.
[Raspberry Pi 3 B+] [ 0.012794] CPU features: detected: 32-bit EL0 Support
[Raspberry Pi 3 B+] [ 0.012815] CPU features: detected: 32-bit EL1 Support
[Raspberry Pi 3 B+] [ 0.012840] CPU features: detected: CRC32 instructions
[Raspberry Pi 3 B+] [ 0.012973] CPU: All CPU(s) started at EL2
[Raspberry Pi 3 B+] [ 0.013009] alternatives: applying system-wide alternatives
[Raspberry Pi 3 B+] [ 0.015899] devtmpfs: initialized
[Raspberry Pi 3 B+] [ 0.027284] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[Raspberry Pi 3 B+] [ 0.027359] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[Raspberry Pi 3 B+] [ 0.030055] pinctrl core: initialized pinctrl subsystem
[Raspberry Pi 3 B+] [ 0.033077] DMI not present or invalid.
[Raspberry Pi 3 B+] [ 0.034110] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[Raspberry Pi 3 B+] [ 0.039183] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[Raspberry Pi 3 B+] [ 0.039368] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[Raspberry Pi 3 B+] [ 0.039561] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[Raspberry Pi 3 B+] [ 0.039682] audit: initializing netlink subsys (disabled)
[Raspberry Pi 3 B+] [ 0.039969] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1
[Raspberry Pi 3 B+] [ 0.041947] thermal_sys: Registered thermal governor 'step_wise'
[Raspberry Pi 3 B+] [ 0.041958] thermal_sys: Registered thermal governor 'power_allocator'
[Raspberry Pi 3 B+] [ 0.042078] cpuidle: using governor menu
[Raspberry Pi 3 B+] [ 0.043322] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[Raspberry Pi 3 B+] [ 0.043499] ASID allocator initialised with 32768 entries
[Raspberry Pi 3 B+] [ 0.047294] Serial: AMBA PL011 UART driver
[Raspberry Pi 3 B+] [ 0.075034] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[Raspberry Pi 3 B+] [ 0.075085] Modules: 0 pages in range for non-PLT usage
[Raspberry Pi 3 B+] [ 0.075093] Modules: 511376 pages in range for PLT usage
[Raspberry Pi 3 B+] [ 0.076210] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[Raspberry Pi 3 B+] [ 0.076261] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[Raspberry Pi 3 B+] [ 0.076290] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[Raspberry Pi 3 B+] [ 0.076315] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[Raspberry Pi 3 B+] [ 0.076343] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[Raspberry Pi 3 B+] [ 0.076368] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[Raspberry Pi 3 B+] [ 0.076397] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[Raspberry Pi 3 B+] [ 0.076421] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[Raspberry Pi 3 B+] [ 0.078731] ACPI: Interpreter disabled.
[Raspberry Pi 3 B+] [ 0.082535] iommu: Default domain type: Translated
[Raspberry Pi 3 B+] [ 0.082567] iommu: DMA domain TLB invalidation policy: strict mode
[Raspberry Pi 3 B+] [ 0.083095] SCSI subsystem initialized
[Raspberry Pi 3 B+] [ 0.083686] usbcore: registered new interface driver usbfs
[Raspberry Pi 3 B+] [ 0.083757] usbcore: registered new interface driver hub
[Raspberry Pi 3 B+] [ 0.083830] usbcore: registered new device driver usb
[Raspberry Pi 3 B+] [ 0.084101] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[Raspberry Pi 3 B+] [ 0.085495] mc: Linux media interface: v0.10
[Raspberry Pi 3 B+] [ 0.085584] videodev: Linux video capture interface: v2.00
[Raspberry Pi 3 B+] [ 0.085695] pps_core: LinuxPPS API ver. 1 registered
[Raspberry Pi 3 B+] [ 0.085720] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[Raspberry Pi 3 B+] [ 0.085769] PTP clock support registered
[Raspberry Pi 3 B+] [ 0.086004] EDAC MC: Ver: 3.0.0
[Raspberry Pi 3 B+] [ 0.086901] scmi_core: SCMI protocol bus registered
[Raspberry Pi 3 B+] [ 0.088149] FPGA manager framework
[Raspberry Pi 3 B+] [ 0.088321] Advanced Linux Sound Architecture Driver Initialized.
[Raspberry Pi 3 B+] [ 0.090303] vgaarb: loaded
[Raspberry Pi 3 B+] [ 0.092114] clocksource: Switched to clocksource arch_sys_counter
[Raspberry Pi 3 B+] [ 0.092490] VFS: Disk quotas dquot_6.6.0
[Raspberry Pi 3 B+] [ 0.092564] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[Raspberry Pi 3 B+] [ 0.092951] pnp: PnP ACPI: disabled
[Raspberry Pi 3 B+] [ 0.104315] NET: Registered PF_INET protocol family
[Raspberry Pi 3 B+] [ 0.104567] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[Raspberry Pi 3 B+] [ 0.106364] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[Raspberry Pi 3 B+] [ 0.106430] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[Raspberry Pi 3 B+] [ 0.106539] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[Raspberry Pi 3 B+] [ 0.106681] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[Raspberry Pi 3 B+] [ 0.107063] TCP: Hash tables configured (established 8192 bind 8192)
[Raspberry Pi 3 B+] [ 0.107283] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[Raspberry Pi 3 B+] [ 0.107356] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[Raspberry Pi 3 B+] [ 0.107549] NET: Registered PF_UNIX/PF_LOCAL protocol family
[Raspberry Pi 3 B+] [ 0.108238] RPC: Registered named UNIX socket transport module.
[Raspberry Pi 3 B+] [ 0.108270] RPC: Registered udp transport module.
[Raspberry Pi 3 B+] [ 0.108291] RPC: Registered tcp transport module.
[Raspberry Pi 3 B+] [ 0.108312] RPC: Registered tcp-with-tls transport module.
[Raspberry Pi 3 B+] [ 0.108334] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Raspberry Pi 3 B+] [ 0.110724] PCI: CLS 0 bytes, default 64
[Raspberry Pi 3 B+] [ 0.112150] kvm [1]: IPA Size Limit: 40 bits
[Raspberry Pi 3 B+] [ 0.117227] kvm [1]: Hyp mode initialized successfully
[Raspberry Pi 3 B+] [ 0.119164] Initialise system trusted keyrings
[Raspberry Pi 3 B+] [ 0.119445] workingset: timestamp_bits=42 max_order=18 bucket_order=0
[Raspberry Pi 3 B+] [ 0.119974] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[Raspberry Pi 3 B+] [ 0.120445] NFS: Registering the id_resolver key type
[Raspberry Pi 3 B+] [ 0.120491] Key type id_resolver registered
[Raspberry Pi 3 B+] [ 0.120514] Key type id_legacy registered
[Raspberry Pi 3 B+] [ 0.120562] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Raspberry Pi 3 B+] [ 0.120591] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[Raspberry Pi 3 B+] [ 0.120829] fuse: init (API version 7.39)
[Raspberry Pi 3 B+] [ 0.121044] 9p: Installing v9fs 9p2000 file system support
[Raspberry Pi 3 B+] [ 0.166735] Key type asymmetric registered
[Raspberry Pi 3 B+] [ 0.166763] Asymmetric key parser 'x509' registered
[Raspberry Pi 3 B+] [ 0.166856] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[Raspberry Pi 3 B+] [ 0.166890] io scheduler mq-deadline registered
[Raspberry Pi 3 B+] [ 0.166913] io scheduler kyber registered
[Raspberry Pi 3 B+] [ 0.166977] io scheduler bfq registered
[Raspberry Pi 3 B+] [ 0.190635] simple-framebuffer 3eaf0000.framebuffer: framebuffer at 0x3eaf0000, 0x10a800 bytes
[Raspberry Pi 3 B+] [ 0.190698] simple-framebuffer 3eaf0000.framebuffer: format=a8r8g8b8, mode=656x416x32, linelength=2624
[Raspberry Pi 3 B+] [ 0.193786] Console: switching to colour frame buffer device 82x26
[Raspberry Pi 3 B+] [ 0.196554] simple-framebuffer 3eaf0000.framebuffer: fb0: simplefb registered!
[Raspberry Pi 3 B+] [ 0.198264] IPMI message handler: version 39.2
[Raspberry Pi 3 B+] [ 0.199893] ipmi device interface
[Raspberry Pi 3 B+] [ 0.201728] ipmi_ssif: IPMI SSIF Interface driver
[Raspberry Pi 3 B+] [ 0.203770] EINJ: ACPI disabled.
[Raspberry Pi 3 B+] [ 0.254673] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[Raspberry Pi 3 B+] [ 0.258847] printk: console [ttyS0] disabled
[Raspberry Pi 3 B+] [ 0.260977] 3f215040.serial: ttyS0 at MMIO 0x3f215040 (irq = 71, base_baud = 50000000) is a 16550
[Raspberry Pi 3 B+] [ 0.264075] printk: console [ttyS0] enabled
[Raspberry Pi 3 B+] [ 1.323342] Serial: AMBA driver
[Raspberry Pi 3 B+] [ 1.328430] SuperH (H)SCI(F) driver initialized
[Raspberry Pi 3 B+] [ 1.335393] msm_serial: driver initialized
[Raspberry Pi 3 B+] [ 1.342185] STM32 USART driver initialized
[Raspberry Pi 3 B+] [ 1.349483] bcm2835-rng 3f104000.rng: hwrng registered
[Raspberry Pi 3 B+] [ 1.377224] loop: module loaded
[Raspberry Pi 3 B+] [ 1.384521] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[Raspberry Pi 3 B+] [ 1.395273] megasas: 07.725.01.00-rc1
[Raspberry Pi 3 B+] [ 1.404268] SPI driver spidev has no spi_device_id for brcm,bcm2835-spi
[Raspberry Pi 3 B+] [ 1.419505] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[Raspberry Pi 3 B+] [ 1.430380] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[Raspberry Pi 3 B+] [ 1.452228] tun: Universal TUN/TAP device driver, 1.6
[Raspberry Pi 3 B+] [ 1.461069] thunder_xcv, ver 1.0
[Raspberry Pi 3 B+] [ 1.465945] thunder_bgx, ver 1.0
[Raspberry Pi 3 B+] [ 1.470726] nicpf, ver 1.0
[Raspberry Pi 3 B+] [ 1.474936] nicvf, ver 1.0
[Raspberry Pi 3 B+] [ 1.479193] tulip: tulip: unknown CPU architecture, using default csr0
[Raspberry Pi 3 B+] [ 1.489639] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[Raspberry Pi 3 B+] [ 1.498403] hns3: Copyright (c) 2017 Huawei Corporation.
[Raspberry Pi 3 B+] [ 1.505288] hclge is initializing
[Raspberry Pi 3 B+] [ 1.510326] e100: Intel(R) PRO/100 Network Driver
[Raspberry Pi 3 B+] [ 1.516544] e100: Copyright(c) 1999-2006 Intel Corporation
[Raspberry Pi 3 B+] [ 1.523619] e1000: Intel(R) PRO/1000 Network Driver
[Raspberry Pi 3 B+] [ 1.530030] e1000: Copyright (c) 1999-2006 Intel Corporation.
[Raspberry Pi 3 B+] [ 1.537385] e1000e: Intel(R) PRO/1000 Network Driver
[Raspberry Pi 3 B+] [ 1.543864] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[Raspberry Pi 3 B+] [ 1.551338] igb: Intel(R) Gigabit Ethernet Network Driver
[Raspberry Pi 3 B+] [ 1.558219] igb: Copyright (c) 2007-2014 Intel Corporation.
[Raspberry Pi 3 B+] [ 1.565310] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[Raspberry Pi 3 B+] [ 1.573047] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[Raspberry Pi 3 B+] [ 1.580996] sky2: driver version 1.30
[Raspberry Pi 3 B+] [ 1.590403] usbcore: registered new device driver r8152-cfgselector
[Raspberry Pi 3 B+] [ 1.598135] usbcore: registered new interface driver r8152
[Raspberry Pi 3 B+] [ 1.605046] usbcore: registered new interface driver lan78xx
[Raspberry Pi 3 B+] [ 1.612145] usbcore: registered new interface driver asix
[Raspberry Pi 3 B+] [ 1.618942] usbcore: registered new interface driver ax88179_178a
[Raspberry Pi 3 B+] [ 1.626469] usbcore: registered new interface driver cdc_ether
[Raspberry Pi 3 B+] [ 1.633677] usbcore: registered new interface driver smsc95xx
[Raspberry Pi 3 B+] [ 1.640765] usbcore: registered new interface driver net1080
[Raspberry Pi 3 B+] [ 1.647666] usbcore: registered new interface driver cdc_subset
[Raspberry Pi 3 B+] [ 1.654789] usbcore: registered new interface driver zaurus
[Raspberry Pi 3 B+] [ 1.661539] usbcore: registered new interface driver cdc_ncm
[Raspberry Pi 3 B+] [ 1.668364] usbcore: registered new interface driver lg-vl600
[Raspberry Pi 3 B+] [ 1.675219] usbcore: registered new interface driver r8153_ecm
[Raspberry Pi 3 B+] [ 1.682627] VFIO - User Level meta-driver version: 0.3
[Raspberry Pi 3 B+] [ 1.694113] usbcore: registered new interface driver cdc_acm
[Raspberry Pi 3 B+] [ 1.700854] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[Raspberry Pi 3 B+] [ 1.710919] usbcore: registered new interface driver usblp
[Raspberry Pi 3 B+] [ 1.717534] usbcore: registered new interface driver usb-storage
[Raspberry Pi 3 B+] [ 1.724737] usbcore: registered new interface driver cp210x
[Raspberry Pi 3 B+] [ 1.731347] usbserial: USB Serial support registered for cp210x
[Raspberry Pi 3 B+] [ 1.738320] usbcore: registered new interface driver ftdi_sio
[Raspberry Pi 3 B+] [ 1.745120] usbserial: USB Serial support registered for FTDI USB Serial Device
[Raspberry Pi 3 B+] [ 1.759565] i2c_dev: i2c /dev entries driver
[Raspberry Pi 3 B+] [ 1.767058] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property
[Raspberry Pi 3 B+] [ 1.787686] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[Raspberry Pi 3 B+] [ 1.801466] sdhci: Secure Digital Host Controller Interface driver
[Raspberry Pi 3 B+] [ 1.809037] sdhci: Copyright(c) Pierre Ossman
[Raspberry Pi 3 B+] [ 1.816118] Synopsys Designware Multimedia Card Interface Driver
[Raspberry Pi 3 B+] [ 1.825404] sdhci-pltfm: SDHCI platform and OF driver helper
[Raspberry Pi 3 B+] [ 1.836961] ledtrig-cpu: registered to indicate activity on CPUs
[Raspberry Pi 3 B+] [ 1.848035] usbcore: registered new interface driver usbhid
[Raspberry Pi 3 B+] [ 1.855178] usbhid: USB HID core driver
[Raspberry Pi 3 B+] [ 1.862500] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Raspberry Pi 3 B+] [ 1.875172] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[Raspberry Pi 3 B+] [ 1.897931] Initializing XFRM netlink socket
[Raspberry Pi 3 B+] [ 1.903906] NET: Registered PF_INET6 protocol family
[Raspberry Pi 3 B+] [ 1.905652] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1)
[Raspberry Pi 3 B+] [ 1.909996] Segment Routing with IPv6
[Raspberry Pi 3 B+] [ 1.923557] In-situ OAM (IOAM) with IPv6
[Raspberry Pi 3 B+] [ 1.929240] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[Raspberry Pi 3 B+] [ 1.937580] NET: Registered PF_PACKET protocol family
[Raspberry Pi 3 B+] [ 1.944424] 9pnet: Installing 9P2000 support
[Raspberry Pi 3 B+] [ 1.950334] Key type dns_resolver registered
[Raspberry Pi 3 B+] [ 1.979528] registered taskstats version 1
[Raspberry Pi 3 B+] [ 1.985715] Loading compiled-in X.509 certificates
[Raspberry Pi 3 B+] [ 2.015091] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 99, base_baud = 0) is a PL011 rev2
[Raspberry Pi 3 B+] [ 2.029540] serial serial0: tty port ttyAMA0 registered
[Raspberry Pi 3 B+] [ 2.040985] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-10-17T15:42:39
[Raspberry Pi 3 B+] [ 2.052635] mmc0: host does not support reading read-only switch, assuming write-enable
[Raspberry Pi 3 B+] [ 2.069527] mmc0: new high speed SDHC card at address aaaa
[Raspberry Pi 3 B+] [ 2.076685] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Raspberry Pi 3 B+] [ 2.081952] Console: switching to colour dummy device 80x25
[Raspberry Pi 3 B+] [ 2.092453] mmcblk0: p1 p2 p3 p4
[Raspberry Pi 3 B+] [ 2.104855] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops)
[Raspberry Pi 3 B+] [ 2.117428] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops)
[Raspberry Pi 3 B+] [ 2.123950] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops)
[Raspberry Pi 3 B+] [ 2.130303] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops)
[Raspberry Pi 3 B+] [ 2.136601] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops)
[Raspberry Pi 3 B+] [ 2.143594] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops)
[Raspberry Pi 3 B+] [ 2.150581] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops)
[Raspberry Pi 3 B+] [ 2.157535] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops)
[Raspberry Pi 3 B+] [ 2.165365] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[Raspberry Pi 3 B+] [ 2.208953] Console: switching to colour frame buffer device 90x30
[Raspberry Pi 3 B+] [ 2.232844] vc4-drm soc:gpu: [drm] fb0: vc4drmfb frame buffer device
[Raspberry Pi 3 B+] [ 2.772835] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator
[Raspberry Pi 3 B+] [ 2.781345] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator
[Raspberry Pi 3 B+] [ 2.840739] dwc2 3f980000.usb: DWC OTG Controller
[Raspberry Pi 3 B+] [ 2.847029] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1
[Raspberry Pi 3 B+] [ 2.855710] dwc2 3f980000.usb: irq 51, io mem 0x3f980000
[Raspberry Pi 3 B+] [ 2.863542] hub 1-0:1.0: USB hub found
[Raspberry Pi 3 B+] [ 2.868809] hub 1-0:1.0: 1 port detected
[Raspberry Pi 3 B+] [ 2.886925] sdhci-iproc 3f300000.mmc: allocated mmc-pwrseq
[Raspberry Pi 3 B+] [ 2.890889] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[Raspberry Pi 3 B+] [ 2.903099] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[Raspberry Pi 3 B+] [ 2.909900] clk: Disabling unused clocks
[Raspberry Pi 3 B+] [ 2.909901] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[Raspberry Pi 3 B+] [ 2.924644] cfg80211: failed to load regulatory.db
[Raspberry Pi 3 B+] [ 2.930329] ALSA device list:
[Raspberry Pi 3 B+] [ 2.933970] #0: vc4-hdmi
[Raspberry Pi 3 B+] [ 2.937221] mmc1: SDHCI controller on 3f300000.mmc [3f300000.mmc] using PIO
[Raspberry Pi 3 B+] [ 2.953691] VFS: Mounted root (squashfs filesystem) readonly on device 179:3.
[Raspberry Pi 3 B+] [ 2.965326] devtmpfs: mounted
[Raspberry Pi 3 B+] [ 2.976395] Freeing unused kernel memory: 10752K
[Raspberry Pi 3 B+] [ 2.996167] Run /gokrazy/init as init process
[Raspberry Pi 3 B+] [ 3.030276] mmc1: new high speed SDIO card at address 0001
[Raspberry Pi 3 B+] [ 3.173889] usb 1-1: new high-speed USB device number 2 using dwc2
[Raspberry Pi 3 B+] gokrazy build timestamp 2023-11-21T03:44:28Z
[Raspberry Pi 3 B+] 1970/01/01 00:00:03 gokraz[ 3.361389] EXT4-fs (mmcblk0p4): bad geometry: block count 3606912 exceeds size of device (3606907 blocks)
[Raspberry Pi 3 B+] y.go:76: found hardware watchdog "Broadcom BCM2835 Watchdog timer" with [ 3.377140] FAT-fs (mmcblk0p4): bogus number of reserved sectors
[Raspberry Pi 3 B+] timeout 15s, pin[ 3.385140] FAT-fs (mmcblk0p4): Can't find a valid FAT filesystem
[Raspberry Pi 3 B+] ging... [ 3.388882] hub 1-1:1.0: USB hub found
[Raspberry Pi 3 B+]
[Raspberry Pi 3 B+] 1970/01/01 00:00:03 mou[ 3.397961] hub 1-1:1.0: 4 ports detected
[Raspberry Pi 3 B+] nt.go:112: Could not mount permanent storage partition /dev/mmcblk0p4 as ext4: invalid argument
[Raspberry Pi 3 B+] 1970/01/01 00:00:03 mount.go:112: Could not mount permanent storage partition /dev/mmcblk0p4 as vfat: invalid argument
[Raspberry Pi 3 B+] hostname "bakeryplus"
[Raspberry Pi 3 B+] gokrazy device model Raspberry Pi 3 Model B Plus Rev 1.3
[Raspberry Pi 3 B+] 1970/01/01 00:00:03 gokrazy.go:440: getting EEPROM version: RECOVERY.000 not found, assuming update unsuccessful
[Raspberry Pi 3 B+] 1970/01/01 00:00:03 listeners.go:78: now listening on 127.0.0.1:80
[Raspberry Pi 3 B+] 1970/01/01 00:00:03 listeners.go:78: now listening on [::1]:80
[Raspberry Pi 3 B+] [ 3.688178] usb 1-1.1: new high-speed USB device number 3 using dwc2
[Raspberry Pi 3 B+] [ 3.801109] hub 1-1.1:1.0: USB hub found
[Raspberry Pi 3 B+] [ 3.806135] hub 1-1.1:1.0: 3 ports detected
[Raspberry Pi 3 B+] 1970/01/01 00:00:03 randomd.go:83: seeding random pool failed: open /perm/random.seed: read-only file system
[Raspberry Pi 3 B+] timestamps: boot: 2023-11-21 03:44:30 +0000 UTC, root: 2023-11-21 03:44:31 +0000 UTC (boot=1700538270 root=1700538271)
[Raspberry Pi 3 B+] [ 4.508433] usb 1-1.1.1: new high-speed USB device number 4 using dwc2
[Raspberry Pi 3 B+] [ 4.883159] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[Raspberry Pi 3 B+] [ 5.374962] lan78xx 1-1.1.1:1.0 eth0: Link is Down
[Raspberry Pi 3 B+] [ 7.480410] lan78xx 1-1.1.1:1.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[Raspberry Pi 3 B+] 1970/01/01 00:00:08 listeners.go:78: now listening on 10.0.0.107:80
[Raspberry Pi 3 B+] 1970/01/01 00:00:08 listeners.go:75: listen: listen tcp [fe80::ba27:ebff:fe46:1240%eth0]:80: bind: cannot assign requested address
[Raspberry Pi 3 B+] 1970/01/01 00:00:08 listeners.go:75: listen: listen tcp [fe80::ba27:ebff:fe46:1240%eth0]:80: bind: cannot assign requested address
[Raspberry Pi 3 B+] 1970/01/01 00:00:08 listeners.go:78: now listening on [fe80::ba27:ebff:fe46:1240%eth0]:80
[Raspberry Pi 3 B+] [ 9.422219] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[Raspberry Pi 3 B+] [ 9.432685] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.bin failed with error -2
[Raspberry Pi 3 B+] [ 9.672324] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[Raspberry Pi 3 B+] [ 9.681754] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 2 2020 23:30:41 version 7.45.202 (r724630 CY) FWID 01-72f6ece2
[Raspberry Pi 3 B+] 2023/11/21 03:45:24 listeners.go:78: now listening on [fe80::ba27:ebff:fe13:4715%wlan0]:80
[Raspberry Pi 3 B+] 2023/11/21 03:45:25 listeners.go:78: now listening on [fd7c:ae21:eb36:0:ba27:ebff:fe13:4715]:80
[Raspberry Pi 3 B+] 2023/11/21 03:45:39 listeners.go:78: now listening on 192.168.1.212:80
[Raspberry Pi 3 B+] 2023/11/21 03:45:39 listeners.go:114: no longer listening on 192.168.1.212:80
[Raspberry Pi 3 B+] 2023/11/21 03:45:39 listeners.go:106: serving on 192.168.1.212:80: http: Server closed
[Raspberry Pi 3 B+] 2023/11/21 03:45:58 listeners.go:78: now listening on 192.168.1.212:80
[Raspberry Pi 3 B+] 2023/11/21 03:45:59 listeners.go:114: no longer listening on 192.168.1.212:80
[Raspberry Pi 3 B+] 2023/11/21 03:45:59 listeners.go:106: serving on 192.168.1.212:80: http: Server closed
[Raspberry Pi 3 B+] SUCCESS
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment